AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1150 DIESEL TRUCK ENGINE 96B00001-01747 BASIC ENGINE Caterpillar SIS



TRUCK ENGINE 1150 TRUCK ENGINE 96B
 1150 DIESEL TRUCK ENGINE 96B00001-01747 UEG0081S 1150 96B   (1967)

Parts group 1150:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GROUP
9L-9987 AIR COMPRESSOR GROUP
9L9987 AIR COMPRESSOR GROUP--Tu-Flo 400
AIR COMPRESSOR GROUP
9L-9901 AIR COMPRESSOR GROUP
9L9901 AIR COMPRESSOR GROUP--Tu-Flo 500--Type 1
Serial No. 96B1298-Up
9L1167 Compressor parts are shown on Page 48C
AIR COMPRESSOR GROUP
9L-9901 AIR COMPRESSOR GROUP
9L9901 AIR COMPRESSOR GROUP--Tu-Flo 500--Type 2
Serial No. 96B1298-Up
8L3565 Compressor parts are shown on Page 48B-2
AIR COMPRESSOR GROUP
9L-9901 AIR COMPRESSOR GROUP
9L9901 AIR COMPRESSOR GROUP--Tu-Flo 500--Type 3
Serial No. 96B1298-Up
8L3565 Compressor parts are shown on Page 48B-2
AIR COMPRESSOR ASSEMBLY
8L-3565 AIR COMPRESSOR ASSEMBLY
8L3565 AIR COMPRESSOR ASSEMBLY
Serial No. 96B1298-Up
Part of 9L9901 Air Compressor Group shown on Pages 48B-1 and 48B-1b
AIR COMPRESSOR ASSEMBLY
9L-1167 AIR COMPRESSOR ASSEMBLY
9L1167 AIR COMPRESSOR ASSEMBLY
Serial No. 96B1298-Up
Part of 9L9901 Air Compressor Group shown on Page 48B
CRANKSHAFT GP
CRANKSHAFT GROUP
9L-8300 CRANKSHAFT GROUP
9L8300 CRANKSHAFT GROUP
Part of 9L8199, 9L8349, 9L8353, 9L9463 and 9L9480 Engine Arrangements listed on Pages 4 through 7
9L8128 Crankshaft Assembly is also part of 9L9909 Short Block Group listed on Page 49. Only separate parts serviced
CRANKSHAFT GROUP
9L-9415 CRANKSHAFT GROUP
9L9415 CRANKSHAFT GROUP
Part of 9L8199, 9L8349, 9L9473, 9L8353 and 9L9477 Engine Arrangements listed on Pages 4, 5 and 6
9L8128 Crankshaft Assembly is also part of 9L9909 Short Block Group listed on Page 49. Only separate parts serviced
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CYLINDER BLOCK GP
CYLINDER BLOCK GROUP
9L-8302 CYLINDER BLOCK GROUP
9L8302 CYLINDER BLOCK GROUP
Serial No. 96B1 to 96B240 inclusive
Part of 9L8199, 9L8349 and 9L8353 Engine Arrangements listed on Pages 4, 5 and 6
CYLINDER BLOCK GROUP
9L-9446 CYLINDER BLOCK GROUP
9L9446 CYLINDER BLOCK GROUP
Serial No. 96B241-Up
Part of all Engine Arrangements and 9L9909 Short Block Group
listed on Pages 4 through 7 and 49
COVER AND HOUSING GROUP
9L-8299 COVER AND HOUSING GROUP
9L8299 COVER AND HOUSING GROUP
Part of 9L8199, 9L8353, 9L9477, 9L9463 and 9L9480 Engine Arrangements listed on Pages 4, 6 and 7
Only separate parts serviced. Note: 2N3909 Tachometer Drive Adapter is available. See Page 23 for Gasket Kits
COVER AND HOUSING GROUP
9L-8832 COVER AND HOUSING GROUP
9L8832 COVER AND HOUSING GROUP--Left Hand Mounted Positive Crankcase Ventilation
Part of 9L8349 and 9L9473 Engine Arrangements listed on Page 5. Only separate parts serviced
Note: 2N3909 Tachometer Drive Adapter is available. See Page 23 for Gasket Kits
9L-9909 SHORT BLOCK GROUP
9L9909 SHORT BLOCK GROUP
CYLINDER HEAD GP
CYLINDER HEAD GROUP
9L-8278 CYLINDER HEAD GROUP
9L8278 CYLINDER HEAD GROUP
Serial No. 96B1 to 96B337 inclusive
Part of 9L8199, 9L8349 & 9L8353 Engine Arrangements listed on Pages 4, 5 & 6. Only separate parts serviced
CYLINDER HEAD GROUP
9L-9601 CYLINDER HEAD GROUP
9L9601 CYLINDER HEAD GROUP
Serial No. 96B338-Up
Part of all Engine Arrangements listed on Pages 4 through 7. Only separate parts serviced
DRIVE GP-FAN
FAN MOUNTING GROUP
9L-9950 FAN MOUNTING GROUP
9L9950 FAN MOUNTING GROUP
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GROUP
9L-9869 FLYWHEEL GROUP
9L9869 FLYWHEEL GROUP
Part of 9L8199 Engine Arrangement listed on Page 4
Only separate parts serviced
FLYWHEEL GROUP
9L-7150 FLYWHEEL GROUP
9L7150 FLYWHEEL GROUP
AN ATTACHMENT
FLYWHEEL GROUP
9L-8784 FLYWHEEL GROUP
9L8784 FLYWHEEL GROUP
Part of all Engine Arrangements listed on Pages 4 through 7
Only separate parts serviced
FLYWHEEL
FLYWHEEL
FLYWHEEL
FOR USE WITH 14"--2 PLATE CLUTCH
AUTOMATIC TRANSMISSION MOUNTING GROUP
9L-7540 AUTOMATIC TRANSMISSION MOUNTING GROUP
9L7540 AUTOMATIC TRANSMISSION MOUNTING GROUP--Type 1
Serial No. 96B1747-Up
AUTOMATIC TRANSMISSION MOUNTING GROUP
9L-7540 AUTOMATIC TRANSMISSION MOUNTING GROUP
9L7540 AUTOMATIC TRANSMISSION MOUNTING GROUP--Type 2
Serial No. 96B1747-Up
9L7861 Cover parts are shown on Page 48-2
HOUSING GP-FLYWHEEL
AUTOMATIC TRANSMISSION MOUNTING GROUP
9L-7540 AUTOMATIC TRANSMISSION MOUNTING GROUP
9L7540 AUTOMATIC TRANSMISSION MOUNTING GROUP--Type 1
Serial No. 96B1747-Up
AUTOMATIC TRANSMISSION MOUNTING GROUP
9L-7540 AUTOMATIC TRANSMISSION MOUNTING GROUP
9L7540 AUTOMATIC TRANSMISSION MOUNTING GROUP--Type 2
Serial No. 96B1747-Up
9L7861 Cover parts are shown on Page 48-2
COVER GP-FLYWHEEL HOUSING
9L-7861 COVER GP-FLYWHEEL HOUSING
9L7861 FLYWHEEL HOUSING COVER GROUP
Serial No. 96B1747-Up
Part of 9L7540 Automatic Transmission Mounting Group shown on Page 48-1
MISCELLANEOUS INFORMATION
TRANSMISSION CONTROL LINKAGE GROUP
9L-7550 TRANSMISSION CONTROL LINKAGE GROUP
9L7550 TRANSMISSION CONTROL LINKAGE GROUP
Serial No. 96B1747-Up
PAN GP-OIL
OIL PAN GROUP
9L-8362 OIL PAN GROUP
9L8362 OIL PAN GROUP--Front Sump
Part of 9L8199, 9L8353, 9L9477, 9L9463 & 9L9480 Engine Arrangements listed on Pages 4, 6 & 7
Only separate parts serviced. See Page 23 for Gasket Kits
OIL PAN GROUP
9L-9891 OIL PAN GROUP
9L9891 OIL PAN GROUP--Front Sump
Part of 9L8199 Engine Arrangement listed on Page 4
Only separate parts serviced. See Page 23 for Gasket Kits
OIL PAN GROUP
9L-8361 OIL PAN GROUP
9L8361 OIL PAN GROUP--Rear Sump
Serial No. 96B1 to 96B133 inclusive. Part of 9L8349 Engine Arrangement listed on Page 5
Only separate parts serviced. See Page 23 for Gasket Kits
OIL PAN GROUP
9L-8361 OIL PAN GROUP
9L8361 OIL PAN GROUP--Rear Sump
Effective with Serial No. 96B134. Part of 9L8349 and 9L9473 Engine Arrangements listed on Page 5
Only separate parts serviced. See Page 23 for Gasket Kits
PISTON & ROD GP
CONNECTING ROD AND PISTON GROUP
9L-8568 CONNECTING ROD AND PISTON GROUP
9L8568 CONNECTING ROD AND PISTON GROUP--8 Required
Part of all Engine Arrangements listed on Pages 4 through 7. Also part of
9L9909 Short Block Group listed on Page 49. Only separate parts serviced
VALVE MECHANISM GP
VALVE MECHANISM GROUP
9L-8307 VALVE MECHANISM GROUP
9L8307 VALVE MECHANISM GROUP
Serial No. 96B1 to 96B1613 inclusive
Part of all Engine Arrangements listed on Pages 4 through 7
Only separate parts serviced
VALVE MECHANISM GROUP
9L-8307 VALVE MECHANISM GROUP
9L8307 VALVE MECHANISM GROUP
Serial No. 96B1614-Up. Part of 9L8199, 9L9473, 9L9477
and 9L9480 Engine Arrangements listed on Pages 4 through 7

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Truck Engine News
Compression Brakes Should be Inspected Carefully During Repairs to the Cylinder Head and Valve Mechanism {1119}
2003/05/01
Disassembly and Assembly
Crankshaft Pulley
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Specifications
Camshaft
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Disassembly and Assembly
Automatic Timing Advance Unit (Engines Equipped With Hydraulic Governor and Engine Camshaft Mounted Timing Advance Unit)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Camshaft Gears (Engines With Fuel Injection Pump Camshaft Mounted Timing Advance)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Camshaft Gears (Engines with Engine Camshaft Mounted Timing Advance and Taper Drive for Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Camshaft Gears (Engine with Engine Camshaft Mounted Timing Advance and Bolt On Drive for Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Camshaft (Engines With Taper Drive For Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Camshaft (Engines With Bolt On Drive For Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Camshaft Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
Procedure To Stop Lubricant Leakage From Flexible Couplings{3252}
1981/06/15
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer
1983/05/18
Some Crankshafts Must Be Tufftride Hardened After A Regrind
1984/02/15
New Rear Crankshaft Seal Has Longer Service Life
1985/01/01
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Disassembly and Assembly
Crankshaft Pulley
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Front Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Rear Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Wear Sleeve
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Gear
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Main Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer{1160,0622}
1983/05/09
Some Crankshafts Must Be Tufftride Hardened After A Regrind{1202}
1984/02/13
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
List Of Main And Connecting Rod Bearings Currently Available
1982/06/23
New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block
1983/08/31
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/12/21
New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
Engine News
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders
1980/06/04
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/10/12
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
installation of 9n6275 cylinder sleeve{1222}
installation of 9n6275 cylinder sleeve{1222}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Specifications
Cylinder Block
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Disassembly and Assembly
Camshaft Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Main Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders{1216,1201}
1980/06/02
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block{1222,1223}
1983/08/08
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Truck Engine News
Improved Cylinder Head Gasket
1983/01/26
Improved Valve Springs Available
1983/04/13
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1983/12/21
Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed
1984/04/04
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets
1984/06/27
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
Head Gasket Replacement Procedure
1985/07/01
Remanufactured Cylinder Head Group For Na Engines Must Not Be Installed On T Engines
1985/07/01
Improved Cylinder Head Gasket
1986/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Engine News
Engine Valve Springs Are Now Made Of Carbon Steel Alloy
1979/03/07
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
Engine Valve Springs Are Now Made Of Stronger Steel
1977/09/07
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Special Instruction
Installation Of Remanufactured Cylinder Head Groups{1101}
Installation Of Remanufactured Cylinder Head Groups{1101}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Assemblies{1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valves
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Valve Seats And Inserts
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Cylinder Head
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Disassembly and Assembly
Cylinder Heads
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
Improved Valve Springs Available{1108}
1983/04/04
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed{1100,1101}
1984/03/05
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Head Gasket Replacement Procedure{0350,1100}
1985/08/05
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Engine Valve Springs Are Now Made Of Stronger Steel{1108}
1977/08/29
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Engine Valve Springs Are Now Made Of Carbon Steel Alloy{1101,1108}
1979/02/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Specifications
Pulley And Damper
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Disassembly and Assembly
Crankshaft Pulley
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
Procedure For Alignment Of Transmission Mounting Parts On 1100 Series And 3208 Truck Engines With Allison MT640, MT650, And AT540 Series Transmissions
1978/05/03
Specifications
Flywheel
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Disassembly and Assembly
Flywheel
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Flywheel Housing
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Gear
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
Procedure For Alignment Of Transmission Mounting Parts On 1100 Series And 3208 Truck Engines With Allison MT640, MT650, And AT540 Series Transmissions{3000,1156,1157}
1978/04/03
Specifications
Timing Gear<BR> Engines with Bolt On Drive for Fuel Injection Pump
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Timing Gear<BR> Engines with Hydraulic Governor and Taper Drive for Fuel Injection Pump
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Disassembly and Assembly
Timing Gear Cover
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Gear
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Truck Engine News
New Rear Crankshaft Seal Has Longer Service Life
1985/01/01
Engine News
Procedure For Alignment Of Transmission Mounting Parts On 1100 Series And 3208 Truck Engines With Allison MT640, MT650, And AT540 Series Transmissions
1978/05/03
Disassembly and Assembly
Flywheel Housing
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Rear Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Procedure For Alignment Of Transmission Mounting Parts On 1100 Series And 3208 Truck Engines With Allison MT640, MT650, And AT540 Series Transmissions{3000,1156,1157}
1978/04/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Disassembly and Assembly
Crankshaft Front Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Timing Gear Cover
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Truck Engine News
List Of Main And Connecting Rod Bearings Currently Available
1982/06/23
Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer
1983/05/18
New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block
1983/08/31
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/12/21
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1983/12/21
FT1886 Valve Spring Compressor Group Available
1984/08/06
New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26
New Rear Crankshaft Seal Has Longer Service Life
1985/01/01
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
Engine News
Engine Valve Springs Are Now Made Of Carbon Steel Alloy
1979/03/07
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges
1980/04/30
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders
1980/06/04
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Engine Valve Springs Are Now Made Of Stronger Steel
1977/09/07
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/10/12
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Timing Gear<BR> Engines with Bolt On Drive for Fuel Injection Pump
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Timing Gear<BR> Engines with Hydraulic Governor and Taper Drive for Fuel Injection Pump
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Valves
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Valve Seats And Inserts
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Valve Rocker Arms And Cam Followers
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Cylinder Head
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Cylinder Block
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Piston
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Pulley And Damper
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Disassembly and Assembly
Rocker Arm Shaft Assembly (Engines With Through The Head Adapters)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Rocker Arm Shaft Assembly (Engines Without Through the Head Adapters)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Cylinder Heads
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Pistons
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Pulley
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Front Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Timing Gear Cover
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Camshaft Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Flywheel Housing
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Rear Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Wear Sleeve
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Crankshaft Gear
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Main Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Engine Front Support
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Oil Pan
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders{1216,1201}
1980/06/02
Procedure To Stop Lubricant Leakage From Flexible Couplings{3252}
1981/06/15
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Installation Of Bearing For Connecting Rod Piston Pin{1219}
1983/05/09
Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer{1160,0622}
1983/05/09
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
Procedure For Alignment Of Transmission Mounting Parts On 1100 Series And 3208 Truck Engines With Allison MT640, MT650, And AT540 Series Transmissions{3000,1156,1157}
1978/04/03
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Engine Valve Springs Are Now Made Of Carbon Steel Alloy{1101,1108}
1979/02/19
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Disassembly and Assembly
Engine Front Support
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Engine News
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges
1980/04/30
Disassembly and Assembly
Oil Pan
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21
Truck Engine News
List Of Main And Connecting Rod Bearings Currently Available
1982/06/23
Installation Of Bearing For Connecting Rod Piston Pin
1983/05/18
Remanufactured Connecting Rod Assemblies
1984/02/15
New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26
New Guidelines for Inspecting Pistons {1214}
2006/01/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/10/12
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Specifications
Connecting Rod
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Piston
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Disassembly and Assembly
Pistons
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Installation Of Bearing For Connecting Rod Piston Pin{1219}
1983/05/09
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Specifications
Pulley And Damper
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Disassembly and Assembly
Crankshaft Pulley
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Truck Engine News
Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer
1983/05/18
FT1886 Valve Spring Compressor Group Available
1984/08/06
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Service Magazine
Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer{1160,0622}
1983/05/09
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Engine Valve Springs Are Now Made Of Carbon Steel Alloy
1979/03/07
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
Engine Valve Springs Are Now Made Of Stronger Steel
1977/09/07
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Special Instruction
Installation Of Remanufactured Cylinder Head Groups{1101}
Installation Of Remanufactured Cylinder Head Groups{1101}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Assemblies{1101}
Specifications
Valve Rocker Arms And Cam Followers
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Disassembly and Assembly
Valve Covers
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Rocker Arm Shaft Assembly (Engines With Through The Head Adapters)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Rocker Arm Shaft Assembly (Engines Without Through the Head Adapters)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE
Service Magazine
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed{1100,1101}
1984/03/05
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Head Gasket Replacement Procedure{0350,1100}
1985/08/05
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
Engine Valve Springs Are Now Made Of Stronger Steel{1108}
1977/08/29
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Engine Valve Springs Are Now Made Of Carbon Steel Alloy{1101,1108}
1979/02/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.