AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

613 SCRAPER 72M00001-04267 (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



WHEEL SCRAPER 613B WHEEL SCRAPER 72M
 613 SCRAPER 72M00001-04267 (MACHINE) UEG0104S 613B 72M   (1970)

Parts group 613B:

  For full view, you need register
HYDRAULIC SYSTEM
CYLINDER GP
BOWL LIFT CYLINDER GROUP
7J-5508 BOWL LIFT CYLINDER GROUP
7J5508 BOWL LIFT CYLINDER GROUP--4" Bore x 18" Stroke--2 Required--Type 1
Serial No. 72M1 to 72M354 inclusive. Part of Bowl Lift shown on Page 8
BOWL LIFT CYLINDER GROUP
7J-5508 BOWL LIFT CYLINDER GROUP
7J5508 BOWL LIFT CYLINDER GROUP--4" Bore x 18" Stroke--2 Required--Type 2
Serial No. 72M1 to 72M354 inclusive. Part of Bowl Lift shown on Page 8
BOWL LIFT CYLINDER GROUP
7J-6058 BOWL LIFT CYLINDER GROUP
7J6058 BOWL LIFT CYLINDER GROUP--4" Bore x 26.5" Stroke--2 Required
Effective with Serial No. 72M355. Part of Bowl Lift shown on Page 8A
CYLINDER GP-FLOOR
7J-5528 CYLINDER GP-FLOOR
7J5528 EJECTOR CYLINDER GROUP-5" Bore x 24.60" Stroke
Part of Ejector Control shown on Pages 12 and 12A
CYLINDER ASSEMBLY
7J-5857 CYLINDER ASSEMBLY
7J5857 CYLINDER ASSEMBLY-3.50" Bore x 33.50" Stroke
Part of Ejector Control shown on Page 12
CYLINDER ASSEMBLY
8J-1319 CYLINDER ASSEMBLY
8J1319 CYLINDER ASSEMBLY-3.50" Bore x 36.00" Stroke
Serial No. 72M340 to 72M680 inclusive
Part of Ejector Control shown on Page 12A
CYLINDER ASSEMBLY
8J-1319 CYLINDER ASSEMBLY
8J1319 CYLINDER ASSEMBLY-3.50" Bore x 36.00" Stroke
Serial No. 72M681 to 72M1171 inclusive
Part of Ejector Control shown on Pages 12A, 12A-1 and 12A-2
CYLINDER GP-EJECTOR
8J-6418 CYLINDER GP-EJECTOR
8J6418 CYLINDER GP-EJECTOR 3.50" Bore x 36.00" Stroke
Serial No. 72M1172-Up
Part of Ejector Control shown on Page 12A-4
LINES GP-CYLINDER
BOWL LIFT
7J-4057 BOWL LIFT
BOWL LIFT (7J4057 N/S)
Serial No. 72M1 to 72M354 inclusive
7J5508 Cylinder parts are shown on Pages 8C and 8D
BOWL LIFT
7J-4057 BOWL LIFT
BOWL LIFT (7J4057 N/S)
Serial No. 72M355 to 72M1258 inclusive
7J6058 Cylinder parts are shown on Page 9
BOWL LIFT
7J-4057 BOWL LIFT
BOWL LIFT (7J4057 N/S)
Serial No. 72M1259-Up
7J6058 Cylinder parts are shown on Page 9
LINES GP-HYDRAULIC
EJECTOR LINES
7J-4055 EJECTOR LINES
EJECTOR LINES (7J4055 N/S)--As Viewed from Rear Left Hand Side of Scraper
Serial No. 72M1 to 72M616 inclusive
EJECTOR LINES
7J-4055 EJECTOR LINES
EJECTOR LINES (7J4055 N/S)--As Viewed from Rear Left Hand Side of Scraper
Serial No. 72M617 to 72M1220 inclusive
EJECTOR LINES
7J-4055 EJECTOR LINES
EJECTOR LINES (7J4055 N/S)--As Viewed from Rear Left Hand Side of Scraper
Serial No. 72M1221 to 72M1527 inclusive
EJECTOR LINES
7J-4055 EJECTOR LINES
EJECTOR LINES (7J4055 N/S)--As Viewed from Rear Left Hand Side of Scraper
Serial No. 72M1528 to 72M2548 inclusive
EJECTOR LINES
9J-6161 EJECTOR LINES
9J6161 EJECTOR LINES--As Viewed from Rear Left Hand Side of Scraper
Serial No. 72M2549-Up
EJECTOR CONTROL
7J-4064 EJECTOR CONTROL
EJECTOR CONTROL (7J4064 N/S)
Serial No. 72M1 to 72M339 inclusive. 7J5528 and 7J5857 Cylinders and
7J5862 Valve parts are shown on Pages 12B, 13 and 15
EJECTOR CONTROL
7J-4064 EJECTOR CONTROL
EJECTOR CONTROL (7J4064 N/S)
Serial No. 72M340 to 72M763 inclusive. 7J5528, 8J1319 Cylinder and
7J5862 Valve parts are shown on Pages 12B, 14 and 14A
EJECTOR CONTROL
7J-4064 EJECTOR CONTROL
EJECTOR CONTROL (7J4064 N/S)
Serial No. 72M764 to 72M845 inclusive. 7J5528, 8J1319 Cylinder and
8J3128 Valve parts are shown on Pages 12B, 14 and 14A
EJECTOR CONTROL
7J-4064 EJECTOR CONTROL
EJECTOR CONTROL (7J4064 N/S)
Serial No. 72M846 to 72M1171 inclusive. 7J5528, 8J1319 Cylinder
and 8J4841 Valve parts are shown on Pages 12B, 14-1 and 15
EJECTOR CONTROL GROUP
7J-4064 EJECTOR CONTROL GROUP
7J4064 EJECTOR CONTROL GROUP
Serial No. 72M1172 to 72M3404 inclusive
7J5528, 8J6418 Cylinder & 8J4841 Valve parts are shown on
Pages 12B, 14-2 & 15
EJECTOR CONTROL GROUP
7J-4064 EJECTOR CONTROL GROUP
7J4064 EJECTOR CONTROL GROUP
Serial No. 72M3405 to 72M3552 inclusive
7J5528, 8J6418 Cylinder & 8J4841 Valve parts are shown on
Pages 12B, 14-2 & 15
EJECTOR CONTROL GROUP
7J-4064 EJECTOR CONTROL GROUP
7J4064 EJECTOR CONTROL GROUP
Serial No. 72M3553-Up
7J5528, 8J6418 Cylinder & 8J4841 Valve parts are shown on
Pages 12B, 14-2 & 15
ELEVATOR MOTOR AND LINES
7J-4056 ELEVATOR MOTOR AND LINES
ELEVATOR MOTOR AND LINES (7J4056 N/S)
Serial No. 72M1 to 72M1107 inclusive
7J4458 Motor parts are shown on Page 16B
MOTOR & LINES GP-ELEVATOR
8J-5228 MOTOR & LINES GP-ELEVATOR
8J5228 ELEVATOR MOTOR AND LINES GROUP
Serial No. 72M1108-Up
7J4458 Motor parts are shown on Page 16B
MOTOR GP
MOTOR AS-HYDRAULIC
7J-4458 MOTOR AS-HYDRAULIC
7J4458 HYDRAULIC MOTOR ASSEMBLY
Part of Elevator Motor and Lines shown on Pages 16 and 16A
VALVE GP-CONTROL
VALVE ASSEMBLY
7J-5862 VALVE ASSEMBLY
7J5862 VALVE ASSEMBLY
Serial No. 72M1 to 72M763 inclusive. Part of Ejector Control shown
on Pages 12 and 12A
VALVE ASSEMBLY
8J-3128 VALVE ASSEMBLY
8J3128 VALVE ASSEMBLY
Serial No. 72M764 to 72M845 inclusive. Part of Ejector Control
shown on Page 12A-1
VALVE ASSEMBLY
8J-4841 VALVE ASSEMBLY
8J4841 VALVE ASSEMBLY
Effective with Serial No. 72M846. Part of Ejector Control
shown on Page 12A-2

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Service Magazine
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Service Magazine
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders (7J6058 And 7J5528)
613B SCRAPER HYDRAULIC SYSTEM
Cylinders (8J6418)
613B SCRAPER HYDRAULIC SYSTEM
Cylinders
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Ejector Cylinder
613 TRACTOR-SCRAPER
Ejector Floor Cylinder
613 TRACTOR-SCRAPER
Bowl And Ejector Control Valve
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Carry Check Valve For Bowl Lift Cylinders
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Bowl Lift Cylinders
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Ejector Cylinder
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Sliding Floor Cylinder
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Service Magazine
Modification Gives Clearance For Installation Of Current Bowl Lift Cylinder On Earlier Scrapers{5303}
1983/08/22
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Specifications
Drive Gear For The Injection Pump
3208 VEHICULAR ENGINE
Pump Drive For Supplemental Steering<BR> (Part of Differential and Bevel Gear Group)
613B WHEEL TRACTOR-SCRAPER STEERING SYSTEM
Disassembly and Assembly
Governor And Fuel Injection Pump Drive
3208 VEHICULAR ENGINE FOR 613B WHEEL TRACTOR
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Oil Filter<BR> (8J4423)
613B SCRAPER HYDRAULIC SYSTEM
Oil Filter<BR> (8J4423)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Oil Filter<BR> (Early Machines)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Hydraulic Tank
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Hydraulic Tank Oil Filters And Housing
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Hydraulic Oil Filter Bypass Valve
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Disassembly and Assembly
Hydraulic Valve Control Levers
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Service Magazine
19943 Hydraulic Hose Fitting Tool Kit Available For Removal And Installation Of Swivel Fitting Assemblies On Hose{0611,5057}
1980/06/23
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Magazine
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Specifications
Valve Rocker Arms And Cam Followers
4.5" BORE, V8 VEHICLE ENGINE (DIRECT INJECTION)
Hydraulic Pump
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Hydraulic Pump (Elevator)<BR> (7J4748)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Elevator Relief Valve<BR> (7J6521)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Elevator Hydraulic Motor<BR> (7J4458)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Door Check Valve<BR> (8J4841 and 8J3128)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Door Check Valve<BR> (7J5862)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Oil Filter<BR> (8J4423)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Oil Filter<BR> (Early Machines)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Cylinders
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Disassembly and Assembly
Hydraulic Tank
613 TRACTOR-SCRAPER
Steering &amp; Scraper Pump
613 TRACTOR-SCRAPER
Elevator Hyd. Pump
613 TRACTOR-SCRAPER
Elevator Hyd. Motor
613 TRACTOR-SCRAPER
Ejector Cylinder
613 TRACTOR-SCRAPER
Ejector Floor Cylinder
613 TRACTOR-SCRAPER
Service Magazine
19943 Hydraulic Hose Fitting Tool Kit Available For Removal And Installation Of Swivel Fitting Assemblies On Hose{0611,5057}
1980/06/23
Modification Gives Clearance For Installation Of Current Bowl Lift Cylinder On Earlier Scrapers{5303}
1983/08/22
New Hydraulic Control Valve Group Gives Better Control Of Scraper Operation{5304}
1985/09/02
Bleed Valve Installed In Hydraulic Circuits{4304,6201,6203,5057}
1977/07/04
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Hydraulic Motor<BR> (7J4458)
613B SCRAPER HYDRAULIC SYSTEM
Elevator Hydraulic Motor<BR> (7J4458)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Elevator Hyd. Motor
613 TRACTOR-SCRAPER
Elevator Motor
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Specifications
Hydraulic Pump For Steering And Implements<BR> (9J5061)
613B WHEEL TRACTOR-SCRAPER STEERING SYSTEM
Hydraulic Pump For Supplemental Steering<BR> (3G1153)
613B WHEEL TRACTOR-SCRAPER STEERING SYSTEM
Pump Drive For Supplemental Steering<BR> (Part of Differential and Bevel Gear Group)
613B WHEEL TRACTOR-SCRAPER STEERING SYSTEM
Hydraulic Pump<BR> (9J5061)
613B SCRAPER HYDRAULIC SYSTEM
Hydraulic Pump<BR> (9J5084)
613B SCRAPER HYDRAULIC SYSTEM
Hydraulic Pump
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Hydraulic Pump (Elevator)<BR> (7J4748)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Disassembly and Assembly
Steering &amp; Scraper Pump
613 TRACTOR-SCRAPER
Elevator Hyd. Pump
613 TRACTOR-SCRAPER
Elevator Hydraulic Pump
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Steering And Scraper Hydraulic Pump
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Elevator Or Steering And Scraper Hydraulic Pump
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Reuse And Salvage Guidelines
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Specifications
Oil Filter<BR> (8J4423)
613B SCRAPER HYDRAULIC SYSTEM
Oil Filter<BR> (8J4423)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Oil Filter<BR> (Early Machines)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank
613 TRACTOR-SCRAPER
Hydraulic Tank
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Hydraulic Tank Oil Filters And Housing
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Hydraulic Oil Filter Bypass Valve
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
Service Magazine
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Specifications
Valve Rocker Arms And Cam Followers
4.5" BORE, V8 VEHICLE ENGINE (DIRECT INJECTION)
Valve Rocker Arms And Cam Followers
3208 VEHICULAR ENGINE
Elevator Relief Valve<BR> (7J6521)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Bleed Valve Installed In Hydraulic Circuits{4304,6201,6203,5057}
1977/07/04
Specifications
Door Check Valve<BR> (8J4841)
613B SCRAPER HYDRAULIC SYSTEM
Door Check Valve<BR> (8J4841 and 8J3128)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Door Check Valve<BR> (7J5862)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Disassembly and Assembly
Check Valve And Bypass Valve
3208 VEHICULAR ENGINE FOR 613B WHEEL TRACTOR
Carry Check Valve For Bowl Lift Cylinders
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Ejector Check Valve
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Service Magazine
Stronger Valve Housing Used In Carry Check Valve In Hydraulic Group For the Bowl Lift{5321}
1978/11/20
Specifications
Elevator Control Valve<BR> (7J2451)
613B SCRAPER HYDRAULIC SYSTEM
Bowl And Ejector Control Valve<BR> (3G1605)
613B SCRAPER HYDRAULIC SYSTEM
Elevator Control Valve<BR> (7J2451)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Bowl And Ejector Control Valve<BR> (7J5863)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Disassembly and Assembly
Elevator Control Valve
613 TRACTOR-SCRAPER
Bowl &amp; Ejector Control Valve
613 TRACTOR-SCRAPER
Bowl And Ejector Control Valve
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Elevator Control Valve
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Elevator Speed Selector Valve
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Hydraulic Valve Control Levers
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Service Magazine
New Hydraulic Control Valve Group Gives Better Control Of Scraper Operation{5304}
1985/09/02
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Specifications
Elevator Relief Valve<BR> (7J6521)
613B SCRAPER HYDRAULIC SYSTEM
Elevator Relief Valve<BR> (7J6521)
613 (72M1-72M4267) SCRAPER HYDRAULIC SYSTEM
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Disassembly and Assembly
Elevator Relief Valve
613B TRACTOR-SCRAPER VEHICLE SYSTEMS
Elevator Speed Selector Valve
613B TRACTOR-SCRAPER VEHICLE SYSTEMS

Truck sale:

Caterpillar 613B, Construction
 
Caterpillar 613B, Construction
- Scrapers
NMC
CATERPILLAR 613B 1982
 
CATERPILLAR 613B 1982
- WHEEL TRACTOR SCRAPERS
NMC CAT
11002 Sapp Bros. Dr. - Omaha - Nebrask
CATERPILLAR 613B 1900
 
CATERPILLAR 613B 1900
- WHEEL TRACTOR SCRAPERS
GREGORY POOLE
4807 Beryl Road P. O. Box 469 (27602) - Raleigh
 
USD $8,000 
1977 CAT 613B

ALTORFER INC
Springfield, Illinois
 
 
1972 CAT 613B

Iron Bound Solutions
Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.