AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

666B TRACTOR 66K00001-UP (MACHINE) POWERED BY D346 ENGINE BASIC ENGINE Caterpillar SIS



WHEEL TRACTOR 666B WHEEL TRACTOR 66K
 666B TRACTOR 66K00001-UP (MACHINE) POWERED BY D346 ENGINE UEG0108S 666B 66K   (1969)

Parts group 666B:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
DRIVE GP-AIR COMPRESSOR
2S-4244 DRIVE GP-AIR COMPRESSOR
AIR COMPRESSOR DRIVE (2S4244 N/S)--Type 1
DRIVE GP-AIR COMPRESSOR
2S-4244 DRIVE GP-AIR COMPRESSOR
2S4244 AIR COMPRESSOR DRIVE GROUP--Type 2
Serial No. 66K1--Up and Engine Serial No. 73X1--Up
AIR COMPRESSOR ASSEMBLY
2S-2764 AIR COMPRESSOR ASSEMBLY
2S2764 AIR COMPRESSOR ASSEMBLY
Serial No. 66K1 to 66K221 inclusive
Part of 2S3707 Air Compressor Group shown on Page 38B
AIR COMPRESSOR GP
1P-5013 AIR COMPRESSOR GP
1P5013 AIR COMPRESSOR GROUP
Serial No. 66K222--Up and Engine Serial No. 73X1--Up
Part of 2S3707 Air Compressor Group shown on Page 39
AIR COMPRESSOR
2S-3707 AIR COMPRESSOR
AIR COMPRESSOR (2S3707 N/S)
Serial No. 66K1 to 66K221 inclusive
2S2764 Compressor parts are shown on Page 38
AIR COMPRESSOR GROUP
2S-3707 AIR COMPRESSOR GROUP
2S3707 AIR COMPRESSOR GROUP
Serial No. 66K222--Up and Engine Serial No. 73X1--Up
1P5013 Air Compressor parts are shown on Page 38A
CAMSHAFT GP
CAMSHAFT GP
3S-3982 CAMSHAFT GP
CAMSHAFT (3S3982 N/S)--Part 1 of 2
Serial No. 66K1 to 66K221 inclusive
3S-3982 CAMSHAFT GP
CAMSHAFT (3S3982 N/S)--Part 2 of 2
Serial No. 66K1 to 66K221 inclusive
CAMSHAFT GP
3S-3982 CAMSHAFT GP
CAMSHAFT (3S3982 N/S)--Part 1 of 2
Serial No. 66K222 to 66K225 inclusive
3S-3982 CAMSHAFT GP
CAMSHAFT (3S3982 N/S)--Part 2 of 2
Serial No. 66K222 to 66K225 inclusive
CAMSHAFT GP
3S-3982 CAMSHAFT GP
3S3982 CAMSHAFT GROUP--Part 1 of 2
Serial No. 66K226 to 66K230 inclusive
3S-3982 CAMSHAFT GP
3S3982 CAMSHAFT GROUP--Part 2 of 2
Serial No. 66K226 to 66K230 inclusive
CAMSHAFT GP
3S-3982 CAMSHAFT GP
3S3982 CAMSHAFT GROUP--Part 1 of 2
Serial No. 66K231-Up and Engine Serial No. 73X1 only
3S-3982 CAMSHAFT GP
3S3982 CAMSHAFT GROUP--Part 2 of 2
Serial No. 66K231-Up and Engine Serial No. 73X1 only
CAMSHAFT GP
3S-3982 CAMSHAFT GP
3S3982 CAMSHAFT GROUP--Part 1 of 2
Engine Serial No. 73X2-Up
3S-3982 CAMSHAFT GP
3S3982 CAMSHAFT GROUP--Part 2 of 2
Engine Serial No. 73X2-Up
CRANKSHAFT GP
CRANKSHAFT GP
2S-3686 CRANKSHAFT GP
CRANKSHAFT (2S3686 N/S)
Serial No. 66K1 to 66K225 inclusive
CRANKSHAFT GP
2S-3686 CRANKSHAFT GP
2S3686 CRANKSHAFT GROUP
Serial No. 66K226 to 66K235 inclusive
CRANKSHAFT GP
2S-3686 CRANKSHAFT GP
2S3686 CRANKSHAFT GROUP
Serial No. 66K236-Up and Engine Serial No. 73X1-Up
CRANKSHAFT REPLACEMENT BEARINGS
CRANKSHAFT REPLACEMENT BEARINGS
6N-1674 BEARING AND ROD KIT
6N1674 BEARING AND ROD KIT--Field Installation
Serial No. 66K1 to 66K226 inclusive. To convert a complete
engine to right and left hand connecting rods
CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
2S-3687 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (2S3687 N/S)--Front View--Part 1 of 3
Serial No. 66K1 to 66K222 inclusive. Note: 5S1262 Piston and Liner Group,
consisting of: 1--Piston Assembly, 1--Liner and 3--Seal, is available
2S-3687 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (2S3687 N/S)--Rear View--Part 2 of 3
Serial No. 66K1 to 66K222 inclusive. For Field Replacement of 9M5391
Housing Assembly order 9S7508 Flywheel Housing Service Group
2S-3687 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (2S3687 N/S)--Side View--Part 3 of 3
Serial No. 66K1 to 66K222 inclusive
8S6801 Block parts are shown on Pages 30B and 30C. See Page 33 for Gasket Kits
Refer also to Page 188F for special parts
CYLINDER BLOCK AND COVERS
2S-3687 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (2S3687 N/S)--Front View--Part 1 of 3
Serial No. 66K223 to 66K226 inclusive. Note: 5S1262 Piston and Liner Group,
consisting of: 1--Piston Assembly, 1--Liner and 3--Seal, is available
2S-3687 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (2S3687 N/S)--Rear View--Part 2 of 3
Serial No. 66K223 to 66K226 inclusive. Note: For Field Replacement of
1P7941 Housing Assembly order 9S7508 Flywheel Housing Service Group
2S-3687 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (2S3687 N/S)--Side View--Part 3 of 3
Serial No. 66K223 to 66K226 inclusive
8S6801 Block parts are shown on Page 31. See Page 33 for Gasket Kits
Refer also to Page 188F for special parts
CYLINDER BLOCK AND COVERS GROUP
2S-3687 CYLINDER BLOCK AND COVERS GROUP
2S3687 CYLINDER BLOCK AND COVERS GROUP--Front View--Part 1 of 3
Serial No. 66K227 to 66K235 inclusive
2S-3687 CYLINDER BLOCK AND COVERS GROUP
2S3687 CYLINDER BLOCK AND COVERS GROUP--Rear View--Part 2 of 3
Serial No. 66K227 to 66K235 inclusive
2S-3687 CYLINDER BLOCK AND COVERS GROUP
2S3687 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 3 of 3
Serial No. 66K227 to 66K235 inclusive
6N1557 Cylinder Block parts are shown on Page 30D. See Page 33 for Gasket Kits. Refer to Page 188F for special parts
CYLINDER BLOCK AND COVERS GROUP
2S-3687 CYLINDER BLOCK AND COVERS GROUP
2S3687 CYLINDER BLOCK AND COVERS GROUP--Front View--Part 1 of 3
Serial No. 66K236 and Engine Serial No. 73X1-Up
2S-3687 CYLINDER BLOCK AND COVERS GROUP
2S3687 CYLINDER BLOCK AND COVERS GROUP--Rear View--Part 2 of 3
Serial No. 66K236-Up and Engine Serial No. 73X1-Up
2S-3687 CYLINDER BLOCK AND COVERS GROUP
2S3687 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 3 of 3
Serial No. 66K236-Up and Engine Serial No. 73X1-Up
6N1557 Cylinder Block parts are shown on Page 30D
See Page 33 for Gasket Kits. Refer also to Page 188F for special parts
CYLINDER BLOCK ASSEMBLY
8S-6801 CYLINDER BLOCK ASSEMBLY
8S6801 CYLINDER BLOCK ASSEMBLY--Type 1
Serial No. 66K1 to 66K222 inclusive
Part of Cylinder Block and Covers shown on Page 28B
CYLINDER BLOCK ASSEMBLY
8S-6801 CYLINDER BLOCK ASSEMBLY
8S6801 CYLINDER BLOCK ASSEMBLY--Type 2
Serial No. 66K1 to 66K222 inclusive
Part of Cylinder Block and Covers shown on Page 28B
CYLINDER BLOCK ASSEMBLY
6N-1557 CYLINDER BLOCK ASSEMBLY
6N1557 CYLINDER BLOCK ASSEMBLY
Serial No. 66K227-Up and Engine Serial No. 73X1-Up
Part of 2S3687 Cylinder Block and Covers Group shown on Pages 29A & 30A
CYLINDER BLOCK ASSEMBLY
8S-6801 CYLINDER BLOCK ASSEMBLY
8S6801 CYLINDER BLOCK ASSEMBLY
Serial No. 66K226 Only
Part of Cylinder Block and Covers shown on Page 28E
Note: For Field Replacement order 1P6497 Block Assembly plus 1--1P4379 Hardware Kit
CYLINDER BLOCK ASSEMBLY
8S-6801 CYLINDER BLOCK ASSEMBLY
8S6801 CYLINDER BLOCK ASSEMBLY
Serial No. 66K223 to 66K225 inclusive
Part of Cylinder Block and Covers shown on Page 28E
Note: For Field Replacement order 1P6497 Block Assembly plus 1--1P4379 Hardware Kit
CYLINDER HEAD GP
CYLINDER HEAD GP
8S-6461 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (8S6461 N/S)--Side View--Part 1 of 2
Serial No. 66K1 to 66K222 inclusive
8S-6461 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (8S6461 N/S)--End View--Part 2 of 2
Serial No. 66K1 to 66K222 inclusive. See Page 33 for Gasket Kits
CYLINDER HEAD GP
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--Side View--Part 1 of 2
Serial No. 66K223 to 66K230 inclusive. See Page 33 for Gasket Kits
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 66K223 to 66K230 inclusive
CYLINDER HEAD GP
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--Side View--Part 1 of 2
Serial No. 66K231 to 66K235 inclusive
See Page 33 for Gasket Kits
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 66K231 to 66K235 inclusive
CYLINDER HEAD GP
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--Side View--Part 1 of 2
Serial No. 66K236-Up and Engine Serial No. 73X1-Up. See Page 33 for Gasket Kits
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 66K236-Up and Engine Serial No. 73X1-Up
DAMPER GP
DAMPER & PULLEY GP
8S-6403 DAMPER & PULLEY GP
DRIVE PULLEY AND DAMPER (8S6403 N/S)
Serial No. 66K1 to 66K221 inclusive
DAMPER & PULLEY GP
8S-6403 DAMPER & PULLEY GP
8S6403 DRIVE PULLEY AND DAMPER GROUP
Serial No. 66K222--Up and Engine Serial No. 73X1--Up
DRIVE GP-FAN
FAN DRIVE GROUP
8S-6404 FAN DRIVE GROUP
8S6404 FAN DRIVE GROUP
Serial No. 66K1 to 66K222 inclusive
FAN DRIVE GROUP
8S-6404 FAN DRIVE GROUP
8S6404 FAN DRIVE GROUP
Serial No. 66K223 to 66K235 inclusive
FAN DRIVE GROUP
8S-6404 FAN DRIVE GROUP
8S6404 FAN DRIVE GROUP
Serial No. 66K236-Up and Engine Serial No. 73X1-Up
FLYWHEEL GP
FLYWHEEL GROUP
2S-3261 FLYWHEEL GROUP
2S3261 FLYWHEEL GROUP
Serial No. 66K1-Up and Engine Serial No. 73X1-Up
GEAR GP
IDLER GEAR
2S-3701 IDLER GEAR
IDLER GEAR (2S3701 N/S)--Rear View--Part 1 of 2
Serial No. 66K1 to 66K225 inclusive
For Balancer, Camshaft, Fuel Pump and Oil Pump
2S-3701 IDLER GEAR
IDLER GEAR (2S3701 N/S)--Front View--Part 2 of 2
Serial No. 66K1 to 66K225 inclusive
For Balancer, Camshaft, Fuel Pump and Oil Pump
IDLER GEAR GROUP
2S-3701 IDLER GEAR GROUP
2S3701 IDLER GEAR GROUP--Rear View--Part 1 of 2
Serial No. 66K226--Up and Engine Serial No. 73X1--Up
For Balancer, Camshaft, Fuel Pump and Oil Pump
2S-3701 IDLER GEAR GROUP
2S3701 IDLER GEAR GROUP--Front View--Part 2 of 2
Serial No. 66K226--Up and Engine Serial No. 73X1--Up
For Balancer, Camshaft, Fuel Pump and Oil Pump
HOUSING GP-FRONT
IDLER GEAR
2S-3701 IDLER GEAR
IDLER GEAR (2S3701 N/S)--Rear View--Part 1 of 2
Serial No. 66K1 to 66K225 inclusive
For Balancer, Camshaft, Fuel Pump and Oil Pump
2S-3701 IDLER GEAR
IDLER GEAR (2S3701 N/S)--Front View--Part 2 of 2
Serial No. 66K1 to 66K225 inclusive
For Balancer, Camshaft, Fuel Pump and Oil Pump
IDLER GEAR GROUP
2S-3701 IDLER GEAR GROUP
2S3701 IDLER GEAR GROUP--Rear View--Part 1 of 2
Serial No. 66K226--Up and Engine Serial No. 73X1--Up
For Balancer, Camshaft, Fuel Pump and Oil Pump
2S-3701 IDLER GEAR GROUP
2S3701 IDLER GEAR GROUP--Front View--Part 2 of 2
Serial No. 66K226--Up and Engine Serial No. 73X1--Up
For Balancer, Camshaft, Fuel Pump and Oil Pump
MOUNTING GP-ENGINE
ENGINE SUPPORT GROUP
2S-0728 ENGINE SUPPORT GROUP
2S728 ENGINE SUPPORT GROUP
PISTON & ROD GP
CONNECTING ROD AND PISTON GROUP
2S-0708 CONNECTING ROD AND PISTON GROUP
2S708 CONNECTING ROD AND PISTON GROUP--8 Required
Serial No. 66K1 to 66K226 inclusive
PISTON & ROD GP
4N-8952 PISTON & ROD GP
4N8952 CONNECTING ROD AND PISTON GROUP--4 Required
Serial No. 66K227-Up and Engine Serial No. 73X1-Up
6N-1674 BEARING AND ROD KIT
6N1674 BEARING AND ROD KIT--Field Installation
Serial No. 66K1 to 66K226 inclusive. To convert a complete
engine to right and left hand connecting rods
PULLEY GP
DAMPER & PULLEY GP
8S-6403 DAMPER & PULLEY GP
DRIVE PULLEY AND DAMPER (8S6403 N/S)
Serial No. 66K1 to 66K221 inclusive
DAMPER & PULLEY GP
8S-6403 DAMPER & PULLEY GP
8S6403 DRIVE PULLEY AND DAMPER GROUP
Serial No. 66K222--Up and Engine Serial No. 73X1--Up
VALVE MECHANISM GP
CYLINDER HEAD GP
8S-6461 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (8S6461 N/S)--Side View--Part 1 of 2
Serial No. 66K1 to 66K222 inclusive
8S-6461 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (8S6461 N/S)--End View--Part 2 of 2
Serial No. 66K1 to 66K222 inclusive. See Page 33 for Gasket Kits
CYLINDER HEAD GP
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--Side View--Part 1 of 2
Serial No. 66K223 to 66K230 inclusive. See Page 33 for Gasket Kits
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 66K223 to 66K230 inclusive
CYLINDER HEAD GP
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--Side View--Part 1 of 2
Serial No. 66K231 to 66K235 inclusive
See Page 33 for Gasket Kits
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 66K231 to 66K235 inclusive
CYLINDER HEAD GP
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--Side View--Part 1 of 2
Serial No. 66K236-Up and Engine Serial No. 73X1-Up. See Page 33 for Gasket Kits
8S-6461 CYLINDER HEAD GP
8S6461 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 66K236-Up and Engine Serial No. 73X1-Up

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor Drive Gear
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Drive For The Hydraulic Pump And The Air Compressor
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Air Compressor Governor
657B & 666B TRACTORS-SCRAPERS AIR SYSTEM AND BRAKES
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Specifications
V-Belt Tension Chart
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Systems Operation
Compression Brake
3406E and 3456 Engines for Caterpillar Built Machines
Testing and Adjusting
Control Valve (Compression Brake) - Test
3406E and 3456 Engines for Caterpillar Built Machines
Solenoid Valve (Compression Brake) - Test
3406E and 3456 Engines for Caterpillar Built Machines
Slave Piston Lash - Adjust
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Compression Brake - Remove - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Install - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Disassemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Assemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Specifications
Camshafts
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshafts
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Camshafts
657B & 666B SCRAPER ENGINE
Camshaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
A New Improved Cam Gear Is Now Available for the Engines of Certain Machines {1212}
2013/06/19
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Special Instruction
Installation Of 2G4553 Thrust Plate{4201, 4209}
Installation Of 2G4553 Thrust Plate{4201, 4209}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Specifications
Crankshaft
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Main Bearings - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Damper And Hub
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Crankshaft Front Seal
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Main Bearings
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Crankshaft Rear Seal
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Crankshaft
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Crankshaft Pulley And Damper
657B & 666B SCRAPER ENGINE
Crankshaft Front Seal
657B & 666B SCRAPER ENGINE
Crankshaft Rear Seal
657B & 666B SCRAPER ENGINE
Crankshaft
657B & 666B SCRAPER ENGINE
Bearing Clearance - Check
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
FT1576 Puller Plate Used For Removal Of Crankshaft Gear; Drawings For FT1576 Puller Plate Can Be Used For Modification Of Existing Puller Plate{0621,1204,1202}
1981/01/19
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available{0374,1203,1202}
1981/02/02
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1982/07/19
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy{1203}
1977/01/31
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material{1230}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2006/06/26
A New Type of Main Bearing is Available {1202, 1203}
2008/07/14
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Specifications
Cylinder Block
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Cylinder Liner
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Cylinder Liner Projection
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Main Bearings
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Main Bearings - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Spacer Plate
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Cylinder Liner
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Main Bearings
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Spacer Plate
657B & 666B SCRAPER ENGINE
Flywheel Housing
657B & 666B SCRAPER ENGINE
Cylinder Liners
657B & 666B SCRAPER ENGINE
Bearing Clearance - Check
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Corrected &quot;5.4&quot; 60&deg;V Main Bearing Selection Guide&quot; Is Now Available{0374,1203,1202}
1981/02/02
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy{1203}
1977/01/31
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Engine Cylinder Liner Available{1216}
1996/01/15
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/15
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Service Letter-NACD
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Australia
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-CFEL
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-CSARL
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Americas
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Specifications
Precombustion Chamber
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Valves
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Cylinder Head
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Asia
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Service Letter-APD
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Precombustion Chambers
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Cylinder Head
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Cylinder Head
657B & 666B SCRAPER ENGINE
Electronic Unit Injector Sleeve - Install
3406E and 3456 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Head - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Head - Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
New Water Seals Used In Cylinder Head Groups{1115,1101}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Precombustion Chamber Seal Available{1106,1100}
1985/09/02
Torque Increase For Cylinder Head Bolts{1101}
1985/09/30
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/08/18
Silicone Water Seal Available{1101}
1986/12/15
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves {1105}
1990/05/28
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/15
Specifications
Vibration Damper And Pulley
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Damper And Hub
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Crankshaft Pulley And Damper
657B & 666B SCRAPER ENGINE
Vibration Damper and Pulley - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Drive For The Hydraulic Pump And The Air Compressor
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Service Magazine
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207}
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207}
Specifications
Drive For The Hydraulic Pump And The Air Compressor
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Fan Drive
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Disassembly and Assembly
Fan Drive
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Fan Drive - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive - Assemble
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive - Install
3406E and 3456 Engines for Caterpillar Built Machines
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Timing Gears
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Housing Bore
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Housing Runout
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Runout
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Housing
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel
657B & 666B SCRAPER ENGINE
Flywheel Housing
657B & 666B SCRAPER ENGINE
Flywheel - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Flywheel - Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Timing Gears
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Front Seal
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Front Timing Gear Cover
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Crankshaft Front Seal
657B & 666B SCRAPER ENGINE
Engine Front Cover
657B & 666B SCRAPER ENGINE
Timing Gears
657B & 666B SCRAPER ENGINE
Timing Gear Plate
657B & 666B SCRAPER ENGINE
Gear Group (Front) - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
A New Improved Cam Gear Is Now Available for the Engines of Certain Machines {1212}
2013/06/19
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing Bore
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Housing Runout
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Housing
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Testing and Adjusting
Flywheel Housing - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Rear Seal
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Crankshaft Rear Seal
657B & 666B SCRAPER ENGINE
Flywheel Housing
657B & 666B SCRAPER ENGINE
Flywheel Housing - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Specifications
Timing Gears
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Crankshaft Front Seal
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Front Timing Gear Cover
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Crankshaft Front Seal
657B & 666B SCRAPER ENGINE
Engine Front Cover
657B & 666B SCRAPER ENGINE
Timing Gears
657B & 666B SCRAPER ENGINE
Timing Gear Plate
657B & 666B SCRAPER ENGINE
Housing (Front) - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Housing (Front) - Install
3406E and 3456 Engines for Caterpillar Built Machines
Front Cover - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Front Cover - Install
3406E and 3456 Engines for Caterpillar Built Machines
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Precombustion Chamber
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Air Compressor Drive Gear
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Drive For The Hydraulic Pump And The Air Compressor
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Timing Gears
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Valves
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Camshafts
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Cylinder Head
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Rocker Arms
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Fan Drive
5.4" BORE, 60ø V8 VEHICULAR ENGINE
V-Belt Tension Chart
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Cylinder Block
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Cylinder Liner
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Cylinder Liner Projection
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Pistons And Rings
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Connecting Rods
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Crankshaft
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Connecting Rod Bearings
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Main Bearings
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Housing Bore
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Housing Runout
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Runout
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Flywheel Housing
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Support For Front Of Engine
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Vibration Damper And Pulley
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}
1980/12/22
Corrected &quot;5.4&quot; 60&deg;V Main Bearing Selection Guide&quot; Is Now Available{0374,1203,1202}
1981/02/02
Use Correct Parts In Oil Pressure Relief Valve{1315,1304}
1981/09/07
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy{1203}
1977/01/31
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
New Oil Pan Assembly Uses An O-Ring And Plug For A Better Seal{1302}
1979/03/05
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Specifications
Support For Front Of Engine
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Oil Pan
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Oil Pan, Pump And Plate
657B & 666B SCRAPER ENGINE
Engine Oil Pan - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}
1980/12/22
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Oil Pan Assembly Uses An O-Ring And Plug For A Better Seal{1302}
1979/03/05
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Installation Of 4N9001 And 4N9002 Connecting Rods{1218}
Installation Of 4N9001 And 4N9002 Connecting Rods{1218}
Installation Of Oversize Connecting Rod Bearings{1219}
Installation Of Oversize Connecting Rod Bearings{1219}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Pistons And Rings
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Connecting Rods
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Connecting Rod Bearings
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3406E and 3456 Engines for Caterpillar Built Machines
Compression - Test
3406E and 3456 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Damper And Hub
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Piston
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Connecting Rod Bearings
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Pistons
657B & 666B SCRAPER ENGINE
Bearing Clearance - Check
3406E and 3456 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3406E and 3456 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3406E and 3456 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Stronger Material Used In Undersize Connecting Rod Bearings{1219}
1977/04/18
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material{1230}
1977/08/22
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Guidelines for Inspecting Pistons {1214}
2006/01/02
An Additional One Piece Steel Piston Is Available for Cylinder Packs Used in the C15 and C27 Engines of Certain Machines {1225, 1239}
2012/11/30
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Vibration Damper And Pulley
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Fan Drive
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Damper And Hub
VEHICULAR ENGINE FOR 641,650,651,657,660 & 666 TRACTOR-SCRA
Crankshaft Pulley And Damper
657B & 666B SCRAPER ENGINE
Vibration Damper and Pulley - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Fabricated Air-To-Water Aftercooler Available For Dynamometer Testing Of Engines Equipped With Air-To-Air Aftercoolers{0652,1063}
1979/03/26
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Service Letter-NACD
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Rocker Arms
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3406E and 3456 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Remove - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Install - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Disassemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Assemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm - Assemble
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23
Do Not Use Heli-Coils&reg; To Repair Rocker Arm Assemblies On 5.4&quot; Bore Engines {1123}
1988/12/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/05/17
A New Rocker Arm Assembly is Available {1123}
2008/08/25
A New Rocker Arm Assembly is Available {1123}
2009/02/02
A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}
2010/03/10
A New Rocker Arm Assembly Is Available for Certain Machine Engines {1123}
2010/03/29
A New Valve Bridge Is Available for Certain Machines {1121}
2010/12/24
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Service Magazine
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207}
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207}

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.