AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N5904 MARINE TRANSMISSION SEALING KIT Part Of 3N5932, 3N5933 & 3N5934 Marine Society Spare Parts Kits An Attachment 3192


MARINE TRANSMISSION
TRANSMISSION GP-MARINE

MARINE GEAR 3192 MARINE GEAR 74E
 7251 MARINE TRANSMISSION 74E01246-UP UEG0109S 3192 74E   (1972)

MARINE TRANSMISSION

TRANSMISSION GP-MARINE
SHAFT GP-LOWER
7L-4914 SHAFT GP-LOWER
SHAFT GP-LOWER
9G-6768 SHAFT GP-LOWER
3N-5904 KIT-GEAR SEAL
3N-5908 MARINE TRANSMISSION LOCK KIT
5N-4179 SELF LOCKING BOLT KIT
PLANETARY GP
8L-9777 PLANETARY GP
 

#UEG0109S0110
 

3N-5904: KIT-GEAR SEAL

3N5904 MARINE TRANSMISSION SEALING KIT
Part Of 3N5932, 3N5933 & 3N5934 Marine Society Spare Parts Kits
An Attachment
UEG0109S0110 UEG0109S
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3D-1084 [2] SEAL --TO OUTPUT BEARING SPACER  
  4F-7952 [1] SEAL --TO BREATHER  
  4F-8824 [1] SEAL --TO SUCTION TUBE  
  5F-0149 [1] SEAL --TO STRAINER COVER  
  5F-1678 [1] SEAL --DRAIN TUBE TO FLYWHEEL HOUSING  
  5F-3181 [1] GASKET-- DRAIN TUBE TO HOUSING ASSEMBLY  
  6F-4855 [1] SEAL --TO MANIFOLD FERRULE  
  6F-7767 [1] GASKET --FLYWHEEL HOUSING DRAIN ELBOW  
  8F-8733 [1] SEAL --MANIFOLD ASSEMBLY TO HOUSING ASSEMBLY  
  1H-9696 [2] SEAL --OIL FILTER TO MANIFOLD EXTENSION  
  2H-3927 [2] SEAL --OIL TUBES TO STRAINER & MANIFOLD EXTENSION  
  8H-8257 [1] SEAL --TO OUTPUT BEARING RETAINER  
  2K-9092 [6] RING-- OIL PUMP SHAFT TO MANIFOLD  
  3L-3307 [1] GASKET --TO OIL PUMP  
  4L-1300 [1] GASKET-- TO BOTTOM COVER  
  4L-4344 [1] GASKET --TO REAR COVER  
  4L-4355 [1] SEAL --TO PILOT RING  
  4L-4360 [2] SEAL --TO OUTPUT FLANGE  
  4L-4368 [1] GASKET --TO OUTPUT FLANGE RETAINER  
  5L-3536 [1] GASKET --TO TOP COVER  
  5N-4018 [1] GASKET --STRAINER HOUSING  
  5L-6894 [1] GASKET-- COVER TO DRIVE SPIDER  
  [2] SEAL --OIL PUMP SHAFT TO SPIDER  
  1N-8581 [1] GASKET --TO CONTROL VALVE  
  1N-8588 [1] GASKET --MANIFOLD EXTENSION TO MANIFOLD  
 

#UEG0109S0111
 

3N-5908: MARINE TRANSMISSION LOCK KIT

3N5908 MARINE TRANSMISSION LOCK KIT-RREPLACED BY 5N4179
Part Of 3N5932, 3N5933 And 3N5934 Marine Society Spare Parts
Kits Listed On Pages 9A.02, 9A.03 & 9A.04. An Attachment
UEG0109S0111 UEG0109S
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1A-2362 [3] LOCK --TO ASTERN SHAFT FRONT BEARING RETAINER  
  7B-9514 [2] LOCK-- TO IDLER SHAFT  
  5H-4047 [1] LOCK --TO CLUTCH STUDS  
  0L-0364 [4] LOCK --TO REVERSE DRIVEN GEAR SPLASH PAN  
  [12] LOCK--TO DRIVE RING  
  4L-4348 [10] LOCK-- TO RING GEAR  
  5L-3319 [8] LOCK-- TO LOWER SHAFT BEARING RETAINERS  
  5L-3465 [5] LOCK-- TO CLUTCH STUDS  
  5L-3484 [4] LOCK-- TO LOWER SHAFT FRONT BEARING RETAINER  
  5L-3539 [4] LOCK-- TO LOWER SHAFT BEARING RETAINERS  
  5L-3540 [3] LOCK --TO ASTERN SHAFT REAR BEARING RETAINER  
  5L-3541 [3] LOCK-- TO AHEAD SHAFT REAR BEARING RETAINER  
  5L-6961 [2] LOCK-- TO DRIVE SPIDER REAR BEARING RETAINER  
  5L-6961 [2] LOCK-- TO SUN GEAR RETAINER  
  5L-8575 [8] LOCK-- TO REAR MAINSHAFT BEARING RETAINER  
  5L-8575 [3] LOCK-- TO AHEAD SHAFT FRONT BEARING RETAINER  
  5L-8703 [8] LOCK-- TO FRONT MAINSHAFT BEARING RETAINER  
  6L-1575 [1] LOCK --TO PLANETARY REDUCTION SPLASH PLATE  
  6L-1799 [1] LOCK-- TO OUTPUT FLANGE RETAINER  
  6L-2262 [4] LOCK --TO REVERSE DRIVEN GEAR RETAINER  
  6L-8099 [1] LOCK --TO RING GEAR  
  8L-8537 [1] LOCK-- TO SUN SHAFT RETAINING BOLTS  
  3N-1233 [3] LOCK --TO PLANET SHAFT RETAINER  
  0S-2415 [4] LOCK-- TO PLANETARY REDUCTION SPLASH PLATE  
  0S-2415 [2] LOCK --TO SUN GEAR LUBE BRACKET  
  9S-1333 [2] LOCK --TO OIL SUCTION TUBE  
  9S-1333 [4] LOCK-- TO FORWARD DRIVEN GEAR  
 

#UEG0109S0112
 

5N-4179: SELF LOCKING BOLT KIT

5N4179 SELF LOCKING BOLT KIT
Part Of 3N5932, 3N5933 & 3N5934 Marine Society Spare Parts Kits
An Attachment
UEG0109S0112 UEG0109S
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-2894 [4] WASHER --TO DRIVE SPIDER REAR BEARING RETAINER  
  2M-0849 [12] WASHER -- TO CLUTCH RACK STUDS  
  031-2701 [6] BOLT --TO REVERSE SHAFT BEARING RETAINER  
  034-3557 [12] BOLT --TO REVERSE SHAFT BEARING RETAINER & FORWARD SHAFT BEARING retainer  
  5D-0353 [6] BOLT -- TO FORWARD SHAFT BEARING RET.  
  5K-7143 [10] BOLT --TO LOWER SHAFT BRG. RET. & SUN GEAR SHAFT FRONT RETAINER  
  5D-0353 [8] BOLT -- TO REVERSE DRIVEN GEAR RETAINER  
  5P-7688 [6] BOLT -- TO OUTPUT FLANGE RETAINER  
  4J-8265 [2] NUT --TO REVERSE DRIVEN GEAR SPLASH PAN  
  031-0220 [2] BOLT --TO REVERSE DRIVEN GEAR SPLASH PAN  
  5K-9107 [8] BOLT -- TO PLANETARY REDUCTION SPLASH PLATE AND FORWARD DRIVEN GEAR splash pan  
  5D-9844 [2] BOLT --TO OIL SUCTION TUBE  
  5D-0353 [46] BOLT --TO BEARING RET. PLATES AT UPPER & LOWER SHAFT BORES  
  034-3557 [8] BOLT --TO BEARING RET. AT UPPER FRONT SHAFT BORE  
  031-0219 [6] BOLT --TO BEARING RET. AT LOWER FRONT SHAFT BORE  
  5D-0353 [4] BOLT --TO SUN GEAR RETAINER  
  5K-9107 [9] BOLT --TO PLANET SHAFT  
  5P-7782 [12] BOLT --TO DRIVE RING  
  2M-0849 [22] WASHER -- TO PLANETARY RING GEAR  
  5M-2894 [4] WASHER -- TO IDLER GEAR SHAFT  
  5D-9844 [2] BOLT -- TO SUN GEAR LUBRICATION BRACKET  
 

#UEG0109S0113
 

8L-9777: PLANETARY GP

8L9777 PLANETARY GROUP--3.24:1 Ratio--Type 1
Serial No. 74E1246 to 74E2299 inclusive. AN ATTACHMENT
c108976 UEG0109S
8L9777 PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-8300 [6] WASHER  
  0S-0509 [6] BOLT  
  2H-3504 [6] LOCK (1.0625" THICK)  
  5L-8954 [3] LOCK (.188" THICK)  
  6L-5279 [3] SHAFT ASSEM.  
  6F-0984 [3] DOWEL  
    (1 IN EACH SHAFT ASSEM. 6L5279)
  7L-6970 [1] CARRIER ASSEM.  
  0S-1594 [4] BOLT  
  5L-6961 [2] LOCK  
  5L-8938 [1] PLATE  
  4L-8297 [3] GEAR (31 TEETH)  
  6L-6180 [3] BEARING ASSEM.  
  4K-8603 [1] PLUG  
    (PART OF 2N2982 ASSEM.)
  2N-2982 C [1] SHAFT ASSEM.  
  2N-2983 C [1] TUBE  
  5L-8932 [1] SPACER  
  8L-9774 [1] GEAR (50 TEETH)  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEG0109S0114
 

8L-9777: PLANETARY GP

8L9777 PLANETARY GROUP--3.24:1 Ratio--Type 2
Serial No. 74E1246 to 74E2299 inclusive. AN ATTACHMENT
c134798 UEG0109S
8L9777 PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-8300 [6] WASHER  
  0S-0509 [6] BOLT  
  2H-3504 [6] LOCK (1.0625" THICK)  
  5L-8954 [3] LOCK (.188" THICK)  
  6L-5279 [3] SHAFT ASSEM.  
  2D-6642 [3] BALL  
    (1 IN EACH SHAFT ASSEM. 6L5279)
  7L-6970 [1] CARRIER ASSEM.  
  0S-1594 [4] BOLT  
  5L-6961 [2] LOCK  
  5L-8938 [1] PLATE  
  4L-8297 [3] GEAR  
    (31 TEETH)
  6L-6180 [3] BEARING ASSEM.  
  2N-6402 [1] SHAFT ASSEM.  
  2N-2983 [1] TUBE  
  5L-8932 [1] SPACER  
  2N-6405 [1] GEAR  
    (50 TEETH)
 

#UEG0109S0115
 

8L-9777: PLANETARY GP

8L9777 PLANETARY GROUP--3.24:1 Ratio--Type 3
Serial No. 74E1246 to 74E2299 inclusive. AN ATTACHMENT
c138669 UEG0109S
8L9777 PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-8300 [6] WASHER  
  0S-0509 [9] BOLT  
  2N-4642 [3] PLATE  
  3N-1233 [3] LOCK  
  3N-1211 [3] SHAFT ASSEM.  
  2D-6642 [3] BALL  
    (1 IN EACH SHAFT ASSEM. 3N1211)
  7L-6970 [1] CARRIER ASSEM.  
  0S-1594 [4] BOLT  
  5L-6961 [2] LOCK  
  5L-8938 [1] PLATE  
  4L-8297 [3] GEAR  
    (31 TEETH)
  6L-6180 [3] BEARING ASSEM.  
  2N-6402 [1] SHAFT ASSEM.  
  2N-2983 [1] TUBE  
  5L-8932 [1] SPACER  
  2N-6405 [1] GEAR  
    (50 TEETH)
 

#UEG0109S0116
 

8L-9777: PLANETARY GP

8L9777 PLANETARY GROUP--3.24:1 Ratio
Serial No. 74E2300 to 74E2382 inclusive
c164549 UEG0109S
8L9777 PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-8300 [6] WASHER  
  5K-9107 C [9] BOLT  
  2N-4642 [3] PLATE  
  3N-1211 [3] SHAFT ASSEM.  
  2D-6642 [3] BALL  
    (1 IN EACH SHAFT ASSEM. 3N1211)
  7L-6970 [1] CARRIER ASSEM.  
  5D-0353 C [4] BOLT  
  5L-8938 [1] PLATE  
  4L-8297 [3] GEAR  
    (31 TEETH)
  6L-6180 [3] BEARING ASSEM.  
  2N-6402 [1] SHAFT ASSEM.  
  2N-2983 [1] TUBE  
  5L-8932 [1] SPACER  
  2N-6405 [1] GEAR  
    (50 TEETH)
  C   INDICATES CHANGE
 

#UEG0109S0117
 

8L-9777: PLANETARY GP

8L9777 PLANETARY GROUP--3.24:1 RATIO
Serial No. 74E2383 To 74E2413 Inclusive
c309876 UEG0109S
8L9777 PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-8300 [6] WASHER-RETAINING  
2. 6L-6180 [3] BEARING AS-ROLLER  
3. 4L-8297 C [3] GEAR-PLANETARY (31 TEETH)  
4. 3T-5938 [1] SHAFT AS-GEAR SUN  
  4K-8603 [1] PLUG-CUP  
5. 2N-2983 [1] TUBE-OIL TRANSFER  
6. 2N-2983 C [1] TUBE-OIL TRANSFER (50 TEETH)  
7. 5L-8932 C [1] SPACER  
8. 6L-4808 [1] GEAR-RING (112 TEETH)  
9. 5K-9107 [9] BOLT-SELF LOCKING  
10. 2N-4642 [3] PLATE-RETAINING  
11. 7L-6970 C [1] CARRIER AS  
  6F-0984 [3] DOWEL  
12. 5D-0353 [4] BOLT-SELF LOCKING  
  5L-8938 [1] PLATE-THRUST  
13. 3N-1211 C [3] SHAFT AS-PLANETARY  
14. 2D-6642 [2] BALL  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0109S0118
 

6T-0978: PLANETARY GP

6T978 PLANETARY GROUP--3.25:1 RATIO
Serial No. 74E2414-Up
c309901 UEG0109S
6T0978 PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-8300 [6] WASHER-RETAINING  
2. 6L-6180 [3] BEARING AS-ROLLER  
3. 6T-0969 [3] GEAR-PLANETARY (30 TEETH)  
4. 3T-5938 [1] SHAFT AS-GEAR SUN  
  4K-8603 [1] PLUG-CUP  
5. 2N-2983 [1] TUBE-OIL TRANSFER  
6. 6T-0968 [1] GEAR-SUN (48 TEETH)  
7. 5L-8932 [1] SPACER  
8. 9G-7914 [1] GEAR-RING (108 TEETH)  
9. 5K-9107 [9] BOLT-SELF LOCKING  
10. 2N-4642 [3] PLATE-RETAINING  
11. 7L-6970 [1] CARRIER AS  
  6F-0984 [3] DOWEL  
12. 5D-0353 [4] BOLT-SELF LOCKING  
  5L-8938 [1] PLATE-THRUST  
13. 3N-1211 [3] SHAFT AS-PLANETARY  
14. 2D-6642 [2] BALL  
 

#UEG0109S0119
 

8L-9778: PLANETARY GP

8L9778 PLANETARY GROUP--3.95:1 Ratio--Type 1
Serial No. 74E1246 to 74E2299 inclusive. AN ATTACHMENT
c108977 UEG0109S
8L9778 PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 3192 MARINE GEAR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-8300 [6] WASHER  
  0S-0509 [6] BOLT  
  2H-3504 [6] LOCK (1.0625" THICK)  
  5L-8954 [3] LOCK (.188" THICK)  
  6L-5279 [3] SHAFT ASSEM.  
  6F-0984 [3] DOWEL  
    (1 IN EACH SHAFT ASSEM. 6L5279)
  7L-6969 [1] CARRIER ASSEM.  
  0S-1594 [4] BOLT  
  5L-6961 [2] LOCK  
  5L-8938 [1] PLATE  
  4L-8294 [3] GEAR  
    (37 TEETH)
  6L-6180 [3] BEARING ASSEM.  
  4K-8603 [1] PLUG  
    (PART OF 2N2982 ASSEM.)
  2N-2982 C [1] SHAFT ASSEM.  
  2N-2983 C [1] TUBE  
  5L-8932 [1] SPACER  
  8L-9775 [1] GEAR (38 TEETH)  
  C   INDICATES CHANGE FROM PREVIOUS
 

Information:

Engine News
8L4525 Flange Is Available Again For Parts Service Of 3192 Marine Transmissions
1979/03/14
New Planetary Group Has Gears Which Operate With Lower Noise Levels
1980/07/09
New Ahead Main Shaft Assembly Gives A Tighter Fit; Dimensions For The Fit Of Shafts And Gears
1981/04/22
New Spacer And Plate Used In Transmission Lower Shaft Groups
1981/04/22
Different Check Valve Gives Faster Shifts
1981/05/20
New Spacer; New Shaft Assembly Permits Pressure Lubrication Of Sun Gear
1981/12/16
Improved Lubrication System
1982/09/22
New Gears Will Decrease Noise Level
1982/11/10
Larger Oil Pump Used To Give Better Clutch Cooling And Bearing Lubrication
1983/10/26
Drive Block Retainer Plates Are No Longer Used
1984/01/18
New Suction Tube And Strainer Housing Give Better Access To O-Ring Seal
1984/04/11
New Transmission Control Valve And Pressure Relief Valve Are Used With High Flow Oil Pump
1985/03/01
New Main Shaft Bearing Assembly Has Reduced End Play
1985/04/01
Improved Clutch Disc And Cooling Oil Flow
1986/01/01
New Oil Viscosity Recommendations For All 7200 Series Marine Transmissions
1986/02/01
2N4620 Rubber Drive Block Reinstated For Parts Service
1990/03/01
New Oil Pump Used As Service Replacement{3310}
1996/06/12
Special Instruction
Alignment Of Caterpillar Marine Transmissions And Marine Engines{1000, 3300}
Alignment Of Caterpillar Marine Transmissions And Marine Engines{1000, 3300}
Installation Of 3N6351, 3N8285, 3N9095 And 7T5287 Modulating Valve Groups In Marine Transmissions{3300}
Installation Of 3N6351, 3N8285, 3N9095 And 7T5287 Modulating Valve Groups In Marine Transmissions{3300}
Installation Of Replacement Drive Sleeve For Marine Transmission Oil Pump{3310}
Installation Of Replacement Drive Sleeve For Marine Transmission Oil Pump{3310}
Installation Of 5N1948 And 2W3037 Sound Isolation Mounting Groups{1000, 3300, 7060}
Installation Of 5N1948 And 2W3037 Sound Isolation Mounting Groups{1000, 3300, 7060}
Modification of Marine Transmission Lubrication System{3300}
Modification of Marine Transmission Lubrication System{3300}
Disassembly and Assembly
Idler Shaft
7251 MARINE GEAR
Lower Shaft
7251 MARINE GEAR
Planetary Reduction Gears
7251 MARINE GEAR
Service Magazine
Oil Pump Drive Sleeves Now Available Separately For Parts Service{3300}
1980/06/02
New Planetary Group Has Gears Which Operate With Lower Noise Levels{3301,3304}
1980/06/30
New Spacer And Plate Used In Transmission Lower Shaft Groups{3307}
1981/04/06
New Ahead Main Shaft Assembly Gives A Tighter Fit; Dimensions For The Fit Of Shafts And Gears{3300}
1981/04/13
New Spacer; New Shaft Assembly Permits Pressure Lubrication Of Sun Gear{3304,3307}
1981/11/30
Larger Oil Pump Used To Give Better Clutch Cooling And Bearing Lubrication{3310,3302,3307}
1983/09/05
Drive Block Retainer Plates Are No Longer Used{3305}
1984/01/09
New Suction Tube And Strainer Housing Give Better Access To O-Ring Seal{3310,3311}
1984/03/12
New Transmission Control Valve And Pressure Relief Valve Are Used With High Flow Oil Pump{3313,3310}
1985/02/18
New Main Shaft Bearing Assembly Has Reduced End Play{3306}
1985/03/25
Oil Pump Flow Increased{3310,3314}
1985/07/01
Improved Clutch Disc And Cooling Oil Flow{3300,3302,3303,3306}
1985/12/16
New Oil Viscosity Recommendations For All 7200 Series Marine Transmissions{3351}
1986/02/03
Self Locking Bolts Or Hardened Washers Used In Place Of Sheet Metal Locks{3300}
1977/05/30
Oversize Piston Ring Seal Available For Clutch Group {3302,3300}
1987/03/30
Improved Oil Suction Tube Assembly {3300,3302}
1978/04/17
8L4525 Flange Is Available Again For Parts Service Of 3192 Marine Transmissions{3314}
1979/03/19
New Oil Pump Used As Service Replacement{3310}
1992/11/30

Caterpillar Parts SIS Catalog 3192 :

3N-5934 MARINE SOCIETY SPARE PARTS KIT
3N-5933 MARINE SOCIETY SPARE PARTS KIT
3N-5932 MARINE SOCIETY SPARE PARTS KIT
SHAFT GP-OUTPUT
3N-7064 SHAFT GP-OUTPUT
SHAFT GP-OUTPUT
3N-7064 SHAFT GP-OUTPUT
SHAFT GP-LOWER
9G-6768 SHAFT GP-LOWER
SHAFT GP-LOWER
7L-4914 SHAFT GP-LOWER
SHAFT GP-LOWER
7L-4914 SHAFT GP-LOWER
3N-5908 MARINE TRANSMISSION LOCK KIT
5N-4179 SELF LOCKING BOLT KIT
PLANETARY GP
8L-9777 PLANETARY GP
PLANETARY GP
8L-9777 PLANETARY GP
PLANETARY GP
8L-9777 PLANETARY GP
PLANETARY GP
8L-9777 PLANETARY GP
PLANETARY GP
8L-9777 PLANETARY GP
PLANETARY GP
6T-0978 PLANETARY GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.