AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1693 DIESEL TRUCK ENGINE 65B00001-02917 BASIC ENGINE Caterpillar SIS



TRUCK ENGINE 1693 TRUCK ENGINE 65B
 1693 DIESEL TRUCK ENGINE 65B00001-02917 UEG0119S 1693 65B   (1964)

Parts group 1693:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE
Serial No. 65B1 to 65B276 inclusive. FOR USE WITH AFTERCOOLER
9L1414 Compressor parts are shown on Pages 71, 72 and 73
AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE
Serial No. 65B277 to 65B321 inclusive. FOR USE WITH AFTERCOOLER
9L1414 Compressor parts are shown on Page 73
AIR COMPRESSOR AND DRIVE
9L-1634 AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE (9L1634 N/S)
For use with Aftercooler with Serial No. 65B322 to 65B781 inclusive. For use with or without Aftercooler effective with
Serial No. 65B782 to 65B2379 inclusive. 9L4092 Compressor parts are shown on Page 73B
AIR COMPRESSOR AND DRIVE
9L-1634 AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE (9L1634 N/S)
FOR USE WITH AFTERCOOLER WITH SERIAL NO. 65B322 TO 65B781 INCLUSIVE. FOR USE WITH OR WITHOUT AFTERCOOLER
WITH SERIAL NO. 65B2380 TO 65B2495 INCLUSIVE. 9L5369 Compressor parts are shown on Page 74
AIR COMPRESSOR AND DRIVE
9L-1634 AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE (9L1634 N/S)
FOR USE WITH AFTERCOOLER WITH SERIAL NO. 65B322 TO 65B781 INCLUSIVE. FOR USE WITH OR WITHOUT AFTERCOOLER
EFFECTIVE WITH SERIAL NO. 65B2496-Up. 9L5369 Compressor parts are shown on Page 74
AIR COMPRESSOR AND DRIVE
9L-5584 AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE (9L5584 N/S)
Effective with Serial No. 65B2035 to 65B2379 inclusive
Provides For Top Mounted Breather. FOR USE WITH OR WITHOUT AFTERCOOLER
9L4092 Compressor parts are shown on Page 73B
AIR COMPRESSOR AND DRIVE
9L-5584 AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE (9L5584 N/S)
Effective with Serial No. 65B2380
Provides For Top Mounted Breather. FOR USE WITH OR WITHOUT AFTERCOOLER
9L5369 Compressor parts are shown on Page 74
AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE--Type 1
Serial No. 65B1 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER. 9L1414 Compressor parts are shown on Pages 71, 72 and 73
AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE
AIR COMPRESSOR AND DRIVE--Type 2
Serial No. 65B1 to 65B781 inclusive. FOR USE WITHOUT AFTERCOOLER
9L1414 Compressor parts are shown on Pages 71, 72 and 73
AIR COMPRESSOR ASSEMBLY
9L-1414 AIR COMPRESSOR ASSEMBLY
9L1414 AIR COMPRESSOR ASSEMBLY
Serial No. 65B1 to 65B221 inclusive
Part of Air Compressor and Drive shown on Pages 66, 69 and 70
AIR COMPRESSOR ASSEMBLY
9L-1414 AIR COMPRESSOR ASSEMBLY
9L1414 AIR COMPRESSOR ASSEMBLY
Serial No. 65B222 to 65B271 inclusive
Part of Air Compressor and Drive shown on Pages 66, 69 and 70
AIR COMPRESSOR ASSEMBLY
9L-1414 AIR COMPRESSOR ASSEMBLY
9L1414 AIR COMPRESSOR ASSEMBLY
Serial No. 65B272 to 65B321 inclusive
Part of Air Compressor and Drive shown on Pages 66, 67, 69 and 70
AIR COMPRESSOR ASSEMBLY
9L-1414 AIR COMPRESSOR ASSEMBLY
9L1414 AIR COMPRESSOR ASSEMBLY--Type 2
Serial No. 65B272 to 65B321 inclusive
Part of Air Compressor and Drive shown on Pages 66, 67, 69 and 70
AIR COMPRESSOR ASSEMBLY
9L-4092 AIR COMPRESSOR ASSEMBLY
9L4092 AIR COMPRESSOR ASSEMBLY
Effective with Serial No. 65B322 to 65B2379 inclusive
Part of Air Compressor and Drive shown on Pages 68 and 68C
AIR COMPRESSOR ASSEMBLY
9L-5369 AIR COMPRESSOR ASSEMBLY
9L5369 AIR COMPRESSOR ASSEMBLY
Effective with Serial No. 65B2380
Part of Air Compressor and Drive shown on Pages 68A, 68B & 68D
CAMSHAFT GP
CAMSHAFT
CAMSHAFT
CAMSHAFT
Serial No. 65B1 to 65B122 inclusive
CAMSHAFT
CAMSHAFT
CAMSHAFT
Serial No. 65B123 to 65B781 inclusive
CAMSHAFT GP
9S-0737 CAMSHAFT GP
CAMSHAFT (9S737 N/S)
Serial No. 65B782 to 65B2084 inclusive
CAMSHAFT GP
9S-0737 CAMSHAFT GP
CAMSHAFT (9S737 N/S)
Serial No. 65B2085-Up
CAMSHAFT DRIVE
CAMSHAFT DRIVE
CAMSHAFT DRIVE
Serial No. 65B1 to 65B188 inclusive
CAMSHAFT DRIVE
CAMSHAFT DRIVE
CAMSHAFT DRIVE
Serial No. 65B189 to 65B241 inclusive
CAMSHAFT DRIVE
CAMSHAFT DRIVE
CAMSHAFT DRIVE
Serial No. 65B242 to 65B285 inclusive
CAMSHAFT DRIVE
CAMSHAFT DRIVE
CAMSHAFT DRIVE
Serial No. 65B286 to 65B781 inclusive
CAMSHAFT DRIVE
9L-4768 CAMSHAFT DRIVE
CAMSHAFT DRIVE (9L4768 N/S)
Serial No. 65B782 to 65B2034 inclusive
CAMSHAFT DRIVE
9L-5400 CAMSHAFT DRIVE
CAMSHAFT DRIVE (9L5400 N/S)
Effective with Serial No. 65B2035
Provides For Top Mounted Breather. FOR USE WITH OR WITHOUT AFTERCOOLER
CRANKSHAFT GP
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
Serial No. 65B1 to 65B486 inclusive
FOR USE WITH AFTERCOOLER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
Serial No. 65B487 to 65B587 inclusive
FOR USE WITH AFTERCOOLER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
Effective with Serial No. 65B588
FOR USE WITH AFTERCOOLER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
Serial No. 65B1 to 65B486 inclusive
FOR USE WITHOUT AFTERCOOLER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
Serial No. 65B487 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
CRANKSHAFT AND DAMPER
Effective with Serial No. 65B782
FOR USE WITHOUT AFTERCOOLER
CRANKSHAFT SEAL GROUP
9S-3042 CRANKSHAFT SEAL GROUP
9S3042 CRANKSHAFT SEAL GROUP
Serial No. 65B487 to 65B587 inclusive
CRANKSHAFT REPLACEMENT GEAR GROUP
9S-7536 CRANKSHAFT REPLACEMENT GEAR GROUP
9S7536 CRANKSHAFT REPLACEMENT GEAR GROUP--Field Installation
Serial No. 65B1 to 65B486 inclusive
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT
CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View--Part 1 of 2
Serial No. 65B1 to 65B781 inclusive
FOR USE WITH AFTERCOOLER. 2S1803 Block parts are shown on Page 44
See Page 52 for Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--End View--Part 2 of 2
Serial No. 65B1 to 65B781 inclusive
FOR USE WITH AFTERCOOLER
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View--Part 1 of 2
Effective with Serial No. 65B782. FOR USE WITH AFTERCOOLER
Cylinder Block parts are shown on Page 45. See Page 52 for Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--End View--Part 2 of 2
Effective with Serial No. 65B782
FOR USE WITH AFTERCOOLER
CYLINDER BLOCK AND COVERS
9L-5391 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (9L5391 N/S)--Side View--Part 1 of 2
Effective with Serial No. 65B2035. Provides For Top Mounted Breather
FOR USE WITH OR WITHOUT AFTERCOOLER. Cylinder Block parts are shown on Pages 45 and 45B
See Page 52 for Gasket Kits
CYLINDER BLOCK AND COVERS
9L-5391 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (9L5391 N/S)--End View--Part 2 of 2
Effective with Serial No. 65B2035
Provides For Top Mounted Breather. FOR USE WITH OR WITHOUT AFTERCOOLER
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View--Part 1 of 2
Serial No. 65B1 to 65B781 inclusive. PROVIDES CAST IRON FLYWHEEL HOUSING
2S1803 Block parts are shown on Page 44. See Page 52 for Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--End View--Part 2 of 2
Serial No. 65B1 to 65B781 inclusive
PROVIDES CAST IRON FLYWHEEL HOUSING
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View--Part 1 of 2
Serial No. 65B1 to 65B781 inclusive. FOR USE WITHOUT AFTERCOOLER
2S1803 Block parts are shown on Page 44. See Page 52 for Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--End View--Part 2 of 2
Serial No. 65B1 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER BLOCK AND COVERS
9L-5160 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (9L5160 N/S)--Side View--Type 1--Part 1 of 2
Effective with Serial No. 65B782. FOR USE WITHOUT AFTERCOOLER
Cylinder Block parts are shown on Page 45. See Page 52 for Gasket Kits
CYLINDER BLOCK AND COVERS
9L-5160 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (9L5160 N/S)--End View--Type 1--Part 2 of 2
Effective with Serial No. 65B782
FOR USE WITHOUT AFTERCOOLER
CYLINDER BLOCK AND COVERS
9L-5160 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (9L5160 N/S)--Side View--Type 2--Part 1 of 2
Effective with Serial No. 65B782. FOR USE WITHOUT AFTERCOOLER
Cylinder Block parts are shown on Page 45. See Page 52 for Gasket Kits
CYLINDER BLOCK AND COVERS
9L-5160 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (9L5160 N/S)--End View--Type 2 - Part 2 of 2
Effective with Serial No. 65B782
FOR USE WITHOUT AFTERCOOLER
CYLINDER BLOCK AND COVERS
9L-5390 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (9L5390 N/S)--Side View - Part 1 of 2
Effective with Serial No. 65B2036. Provides For Top Mounted Breather
FOR USE WITHOUT AFTERCOOLER. Cylinder Block parts are shown on Page 45
See Page 52 for Gasket Kits
CYLINDER BLOCK AND COVERS
9L-5390 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS (9L5390 N/S)--End View - Part 2 of 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER
CYLINDER BLOCK AND COVERS GROUP
9L-5779 CYLINDER BLOCK AND COVERS GROUP
9L5779 CYLINDER BLOCK AND COVERS GROUP--Side View--Factory Installation - Part 1 of 2
Serial No. 65B782-Up. FOR USE WITHOUT AFTERCOOLER AND FRONT SUPPORT
9L4859 Block parts are shown on Pages 45 and 45B. See Page 52 for Gasket Kits
CYLINDER BLOCK AND COVERS GROUP
9L-5779 CYLINDER BLOCK AND COVERS GROUP
9L5779 CYLINDER BLOCK AND COVERS GROUP--End View--Factory Installation - Part 2 of 2
Serial No. 65B782-Up
FOR USE WITHOUT AFTERCOOLER AND FRONT SUPPORT
CYLINDER BLOCK ASSEMBLY
2S-1803 CYLINDER BLOCK ASSEMBLY
2S1803 CYLINDER BLOCK ASSEMBLY
Part of Cylinder Block and Covers shown on Page 34, 38 and 40
CYLINDER BLOCK ASSEMBLY
9L-4859 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY (9L4859 N/S)
Serial No. 65B782 to 65B2065 inclusive. Part of Cylinder Block and Covers shown on Pages 36, 37A, 42,
43A & 43C. For field replacement order 9S6169 Service Block Assembly
CYLINDER BLOCK ASSEMBLY
9L-4859 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY (9L4859 N/S)
Effective with Serial No. 65B2066. Part of Cylinder Block and Covers shown on Pages 36, 37A, 42,
43A & 43C. For field replacement order 9S6169 Service Block Assembly
CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View - Part 1 of 2
Serial No. 65B1 to 65B781 inclusive
FOR USE WITH AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View - Part 2 of 2
Serial No. 65B1 to 65B781 inclusive
FOR USE WITH AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-4766 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L4766 N/S)--Side View--Part 1 of 2
Serial No. 65B782 to 65B2481 inclusive
FOR USE AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-4766 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L4766 N/S)--End View--Part 2 of 2
Serial No. 65B782 to 65B2481 inclusive
FOR USE WITH AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-4766 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L4766 N/S)--Side View--Part 1 of 2
Effective with Serial No. 65B2482
FOR USE WITH AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-4766 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L4766 N/S)--End View--Part 2 of 2
Effective with Serial No. 65B2482
FOR USE WITH AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View--Part 1 of 3
Serial No. 65B1 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 3
Serial No. 65B1 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Top View--Part 3 of 3
Serial No. 65B1 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--Side View--Part 1 of 3--Type 1
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--End View--Part 2 of 3--Type 1
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--Top View--Part 3 of 3--Type 1
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--Side View--Part 1 of 3--Type 2
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--End View--Part 2 of 3--Type 2
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--Top View--Part 3 of 3--Type 2
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD GP
9L-5402 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (9L5402 N/S)--Side View--Type 1--Part 1 of 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITH OR WITHOUT AFTERCOOLER
CYLINDER HEAD GP
9L-5402 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (9L5402 N/S)--End View--Type 1--Part 2 of 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITH OR WITHOUT AFTERCOOLER
CYLINDER HEAD GP
9L-5402 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (9L5402 N/S)--Side View--Type 2--Part 1 of 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITH OR WIHTOUT AFTERCOOLER
CYLINDER HEAD GP
9L-5402 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (9L5402 N/S)--End View--Type 2--Part 2 of 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITH OR WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--Side View--Part 1 of 3--Type 1
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--End View--Part 2 of 3--Type 1
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--Top View--Part 3 of 3--Type 1
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--Side View--Part 1 of 3--Type 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--End View--Part 2 of 3--Type 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--Top View--Part 3 of 3--Type 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER
DRIVE GP-ACCESSORY
VARIABLE TIMING DRIVE ASSEMBLY
8S-5115 VARIABLE TIMING DRIVE ASSEMBLY
8S5115 VARIABLE TIMING DRIVE ASSEMBLY
Part of Accessory Drive shown on Page 65
AUTOMATIC TIMING ADVANCE DRIVE
AUTOMATIC TIMING ADVANCE DRIVE
AUTOMATIC TIMING ADVANCE DRIVE
Serial No. 65B1 to 65B303 inclusive
AUTOMATIC TIMING ADVANCE DRIVE
AUTOMATIC TIMING ADVANCE DRIVE
AUTOMATIC TIMING ADVANCE DRIVE
Serial No. 65B304 to 65B309 inclusive
AUTOMATIC TIMING ADVANCE DRIVE
AUTOMATIC TIMING ADVANCE DRIVE
AUTOMATIC TIMING ADVANCE DRIVE
Serial No. 65B310 to 65B781 inclusive
ACCESSORY DRIVE
9L-4711 ACCESSORY DRIVE
ACCESSORY DRIVE (9L4711 N/S)
Serial No. 65B782-Up
8S5115 Variable Timing Drive parts are shown on Page 61
DRIVE GP-AUXILIARY
AUXILIARY SINGLE DRIVE PULLEY GROUP
9L-2420 AUXILIARY SINGLE DRIVE PULLEY GROUP
9L2420 AUXILIARY SINGLE DRIVE PULLEY GROUP
Drive Pulley cannot be used with a 28" Diameter Fan when Crankshaft
centerline to Fan centerline is less than 18"
Only separate parts serviced
AUXILIARY DOUBLE DRIVE PULLEY GROUP
9L-2421 AUXILIARY DOUBLE DRIVE PULLEY GROUP
9L2421 AUXILIARY DOUBLE DRIVE PULLEY GROUP
Drive Pulley cannot be used with a 28" Diameter Fan when Crankshaft
centerline to Fan centerline is less than 18"
Only separate parts serviced
DRIVE GP-FAN
FAN DRIVE
9L-1637 FAN DRIVE
FAN DRIVE (9L1637 N/S)
Serial No. 65B1 to 65B588 inclusive
FOR USE WITH AFTERCOOLER. Refer also to
Page 134 for special parts
FAN DRIVE
9L-1637 FAN DRIVE
FAN DRIVE (9L1637 N/S)
Serial No. 65B589 to 1684, 1686 to 1781, 1784, 1795, 1977, 2005,
2047, 2064 to 2066, 2068 to 2072, 2080, 2090 and 65B2091 inclusive
FOR USE WITH AFTERCOOLER. Refer also to Page 134 for special parts
FAN DRIVE GROUP
9L-5599 FAN DRIVE GROUP
9L5599 FAN DRIVE GROUP
Serial No. 65B1685, 1782, 1783, 1785 to 1794, 1796 to 1976, 1978 to 2004, 2006
to 2046, 2048 to 2063, 2067, 2073 to 2079, 2081 to 2089 and 65B2092-Up
FOR USE WITH AFTERCOOLER. Refer also to Page 134 for special parts
FAN DRIVE
9L-2521 FAN DRIVE
FAN DRIVE (9L2521 N/S)
Serial No. 65B1 to 65B588 inclusive
FOR USE WITHOUT AFTERCOOLER. Refer also to Page 134 for special parts
FAN DRIVE
9L-2521 FAN DRIVE
FAN DRIVE (9L2521 N/S)
Serial No. 65B589 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER. Refer also to Page
134 for special parts
FAN DRIVE
9L-0589 FAN DRIVE
FAN DRIVE (9L589 N/S)
Effective with Serial No. 65B782
FOR USE WITHOUT AFTERCOOLER. Refer also to
Page 134 for special parts
FAN MOUNTING GROUP
9L-4308 FAN MOUNTING GROUP
9L4308 FAN MOUNTING GROUP--Field Installation
FOR USE WITH REAR MOUNTED GOVERNOR CROSS SHAFT
FAN MOUNTING GROUP
9L-4307 FAN MOUNTING GROUP
9L4307 FAN MOUNTING GROUP
FOR USE WITH FRONT MOUNTED GOVERNOR CROSS SHAFT
FAN DRIVE GROUP
9L-6075 FAN DRIVE GROUP
9L6075 FAN DRIVE GROUP (1:1 Ratio)
Serial No. 65B1782-Up. FOR USE WITH TURBOCHARGED TRUCK ENGINE
WITH A 8" DIAMETER CRANKSHAFT PULLEY AND 17.37" FAN TO
CRANKSHAFT CENTER DISTANCE. Provides .600" wide rear groove on Fan
Pulley for Freon Compressor Drive
FAN DRIVE GROUP
9L-6077 FAN DRIVE GROUP
9L6077 FAN DRIVE GROUP (1:1 Ratio)
Serial No. 65B1782-Up. FOR USE WITH TURBOCHARGED-AFTERCOOLED
TRUCK ENGINE WITH 8.75" DIAMETER CRANKSHAFT PULLEY AND 17.37"
FAN TO CRANKSHAFT CENTER DISTANCE. Provides .600" wide rear groove
on Fan Pulley for Freon Compressor Drive
FAN DRIVE GROUP
9L-6374 FAN DRIVE GROUP
9L6374 FAN DRIVE GROUP
Serial No. 65B1782-Up. Note: Provides 1.118 to 1 Ratio on Turbocharged
Engines or 1.223 to 1 Ratio on Turbocharged-Aftercooled Engines
Only separate parts serviced
FAN DRIVE GROUP
9L-6372 FAN DRIVE GROUP
9L6372 FAN DRIVE GROUP
Serial No. 65B1782-Up. Note: Provides 1.09 to 1 Ratio on Turbocharged
Engines or 1 to 1 Ratio on Turbocharged-Aftercooled Engines
Only separate parts serviced
FAN DRIVE GROUP
3N-7194 FAN DRIVE GROUP
3N7194 FAN DRIVE GROUP--Factory Installation
Serial No. 65B2098-Up
DRIVE GP-PUMP
WATER PUMP AND DRIVE
WATER PUMP AND DRIVE
WATER PUMP AND DRIVE
Serial No. 65B1 to 65B139 inclusive
See Page 52 for Gasket Kits
WATER PUMP AND DRIVE GROUP
9L-1515 WATER PUMP AND DRIVE GROUP
9L1515 WATER PUMP AND DRIVE GROUP
Serial No. 65B140 to 65B528 inclusive
See Page 52 for Gasket Kits
WATER PUMP AND DRIVE GROUP
9L-1515 WATER PUMP AND DRIVE GROUP
9L1515 WATER PUMP AND DRIVE GROUP
Serial No. 65B529 to 65B781 inclusive
See Page 52 for Gasket Kits
WATER PUMP AND DRIVE GROUP
9L-1515 WATER PUMP AND DRIVE GROUP
9L1515 WATER PUMP AND DRIVE GROUP
Serial No. 65B782 to 65B2481 inclusive
See Page 52 for Gasket Kits
WATER PUMP AND DRIVE GROUP
9L-1515 WATER PUMP AND DRIVE GROUP
9L1515 WATER PUMP AND DRIVE GROUP
Serial No. 65B2482-Up
See Page 52 for Gasket Kits
OIL PUMP AND DRIVE
OIL PUMP AND DRIVE
OIL PUMP AND DRIVE
Serial No. 65B1 to 65B110 inclusive
OIL PUMP AND DRIVE GROUP
9L-1614 OIL PUMP AND DRIVE GROUP
9L1614 OIL PUMP AND DRIVE GROUP
Serial No. 65B111-Up
HYDRAULIC PUMP DRIVE GROUP
9L-5876 HYDRAULIC PUMP DRIVE GROUP
9L5876 HYDRAULIC PUMP DRIVE GROUP
Serial No. 65B782-Up
FOR USE WITH VICKERS V20 POWER STEERING PUMP
HYDRAULIC PUMP DRIVE GROUP
9L-2445 HYDRAULIC PUMP DRIVE GROUP
9L2445 HYDRAULIC PUMP DRIVE GROUP--Rear
Serial No. 65B1 to 65B781 inclusive. For use with V200 Vickers Hydraulic
Pump, R.H. Rotation with No. 11 splined shaft
Pump speed to Engine speed, 1.05:1 Ratio
HYDRAULIC PUMP DRIVE GROUP
9L-4976 HYDRAULIC PUMP DRIVE GROUP
9L4976 HYDRAULIC PUMP DRIVE GROUP--Rear
Effective with Serial No. 65B782. For use with V200 Vickers Hydraulic
Pump, R.H. Rotation with No. 11 splined shaft
Pump speed to Engine speed, 1.05:1 Ratio
FLYWHEEL GP
FLYWHEEL
FLYWHEEL
FLYWHEEL
Serial No. 65B1 to 65B486 inclusive
FLYWHEEL
FLYWHEEL
FLYWHEEL
Effective with Serial No. 65B487
MOUNTING GP-ENGINE
ENGINE SUPPORT
ENGINE SUPPORT
ENGINE SUPPORT--Front
PAN GP-OIL
OIL PAN
OIL PAN
OIL PAN
Serial No. 65B1 to 65B267 inclusive
OIL PAN
OIL PAN
OIL PAN
Serial No. 65B268 to 65B781 inclusive
OIL PAN
9L-1590 OIL PAN
OIL PAN (9L1590 N/S)
Serial No. 65B782 to 65B2122 inclusive
OIL PAN
9L-1590 OIL PAN
OIL PAN (9L1590 N/S)
Effective with Serial No. 65B2123
OIL PAN GROUP
9L-2360 OIL PAN GROUP
9L2360 OIL PAN GROUP--Front Sump
Only separate parts serviced
PISTON & ROD GP
CONNECTING ROD AND PISTON GROUP
2S-4522 CONNECTING ROD AND PISTON GROUP
2S4522 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 65B1 to 65B195 inclusive
CONNECTING ROD AND PISTON GROUP
9M-4178 CONNECTING ROD AND PISTON GROUP
9M4178 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 65B196 to 65B250 inclusive
CONNECTING ROD AND PISTON GROUP
3S-9546 CONNECTING ROD AND PISTON GROUP
3S9546 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 65B251 to 65B414 inclusive
CONNECTING ROD AND PISTON GROUP
8S-0813 CONNECTING ROD AND PISTON GROUP
8S813 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 65B415 to 65B1272 inclusive
CONNECTING ROD AND PISTON GROUP
2P-0412 CONNECTING ROD AND PISTON GROUP
2P412 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 65B1273-Up
PULLEY GP
AUXILIARY SINGLE DRIVE PULLEY GROUP
9L-2420 AUXILIARY SINGLE DRIVE PULLEY GROUP
9L2420 AUXILIARY SINGLE DRIVE PULLEY GROUP
Drive Pulley cannot be used with a 28" Diameter Fan when Crankshaft
centerline to Fan centerline is less than 18"
Only separate parts serviced
AUXILIARY DOUBLE DRIVE PULLEY GROUP
9L-2421 AUXILIARY DOUBLE DRIVE PULLEY GROUP
9L2421 AUXILIARY DOUBLE DRIVE PULLEY GROUP
Drive Pulley cannot be used with a 28" Diameter Fan when Crankshaft
centerline to Fan centerline is less than 18"
Only separate parts serviced
VALVE MECHANISM GP
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View - Part 1 of 2
Serial No. 65B1 to 65B781 inclusive
FOR USE WITH AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View - Part 2 of 2
Serial No. 65B1 to 65B781 inclusive
FOR USE WITH AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-4766 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L4766 N/S)--Side View--Part 1 of 2
Serial No. 65B782 to 65B2481 inclusive
FOR USE AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-4766 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L4766 N/S)--End View--Part 2 of 2
Serial No. 65B782 to 65B2481 inclusive
FOR USE WITH AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-4766 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L4766 N/S)--Side View--Part 1 of 2
Effective with Serial No. 65B2482
FOR USE WITH AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-4766 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L4766 N/S)--End View--Part 2 of 2
Effective with Serial No. 65B2482
FOR USE WITH AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View--Part 1 of 3
Serial No. 65B1 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 3
Serial No. 65B1 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Top View--Part 3 of 3
Serial No. 65B1 to 65B781 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--Side View--Part 1 of 3--Type 1
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--End View--Part 2 of 3--Type 1
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--Top View--Part 3 of 3--Type 1
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--Side View--Part 1 of 3--Type 2
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--End View--Part 2 of 3--Type 2
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5161 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5161 N/S)--Top View--Part 3 of 3--Type 2
Serial No. 65B782 to 65B2035 inclusive
FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--Side View--Part 1 of 3--Type 1
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--End View--Part 2 of 3--Type 1
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--Top View--Part 3 of 3--Type 1
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--Side View--Part 1 of 3--Type 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER. See Page 52 for Gasket Kits
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--End View--Part 2 of 3--Type 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER
CYLINDER HEAD AND VALVE MECHANISM
9L-5389 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (9L5389 N/S)--Top View--Part 3 of 3--Type 2
Effective with Serial No. 65B2036
Provides For Top Mounted Breather. FOR USE WITHOUT AFTERCOOLER

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
Air Compressor Piston Now Has Five Rings{1803}
1995/09/01
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Engine News
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor
1977/03/15
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Air Compressor
1693 DIESEL TRUCK ENGINE
Service Magazine
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor{1065}
1977/02/28
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
V-Belt Tension Chart
1693 DIESEL TRUCK ENGINE
Truck Engine News
Compression Brakes Should be Inspected Carefully During Repairs to the Cylinder Head and Valve Mechanism {1119}
2003/05/01
Engine News
Be Sure To Drain Oil In BrakeSaver At Every Lubricating Oil Change Period
1977/08/24
Specifications
Stator For Brakesaver
1693 DIESEL TRUCK ENGINE
BrakeSaver Control Valve<BR> (9L5536 and 9L5978)
1693 DIESEL TRUCK ENGINE
Priority Valve<BR> (9L5610 and 9L5942)
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Pulley And Vibration Damper
1693 DIESEL TRUCK ENGINE
Brakesaver Control Valve
1693 DIESEL TRUCK ENGINE
BrakeSaver
1693 DIESEL TRUCK ENGINE
Service Magazine
Be Sure To Drain Oil In BrakeSaver At Every Lubricating Oil Change Period{1155,1300}
1977/08/22
Be Sure To Drain Oil From The BrakeSaver At Every Lubricating Oil Change Period{1318,1155}
1977/10/10
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Specifications
Camshaft And Follower
1693 DIESEL TRUCK ENGINE
Camshaft Drive And Idler Gears
1693 DIESEL TRUCK ENGINE
Camshaft
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Camshafts
1693 DIESEL TRUCK ENGINE
Camshaft Bearings
1693 DIESEL TRUCK ENGINE
Service Magazine
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
Inspection Marks On Bearings
1982/05/19
Crankshaft Has Step At Front Of No. 1 Main Bearing Journal
1983/01/26
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Remanufactured Undersize Crankshafts Are Available
1984/04/04
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal
1980/10/22
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again
1977/05/13
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy
1977/11/09
New Flange-Type Seal Used At Rear Of Crankshaft
1978/08/16
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 7N142 Seal Group{1160}
Installation Of 7N142 Seal Group{1160}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
1693 DIESEL TRUCK ENGINE
Bearing Surface (Journal)
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Crankshaft Front Seal
1693 DIESEL TRUCK ENGINE
Crankshaft Rear Seal
1693 DIESEL TRUCK ENGINE
Crankshaft Main Bearings
1693 DIESEL TRUCK ENGINE
Crankshaft
1693 DIESEL TRUCK ENGINE
Service Magazine
Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal{1202}
1980/10/20
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Flange-Type Seal Used At Rear Of Crankshaft{1161}
1978/07/10
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
Inspection Marks On Bearings
1982/05/19
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Crankshaft Has Step At Front Of No. 1 Main Bearing Journal
1983/01/26
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal
1980/10/22
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy
1977/11/09
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Specifications
Cylinder Block
1693 DIESEL TRUCK ENGINE
Cylinder Liner
1693 DIESEL TRUCK ENGINE
Cylinder Liner Projection
1693 DIESEL TRUCK ENGINE
Main Bearings
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Camshaft Bearings
1693 DIESEL TRUCK ENGINE
Cylinder Head And Spacer Plate
1693 DIESEL TRUCK ENGINE
Cylinder Liners
1693 DIESEL TRUCK ENGINE
Crankshaft Main Bearings
1693 DIESEL TRUCK ENGINE
Service Magazine
Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal{1202}
1980/10/20
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Truck Engine News
Separate Valve Stem Gauges Available
1982/06/23
Engine Valve Stem &quot;use Again &quot; Specifications
1983/03/02
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves
1990/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Use Correct Washers With Cylinder Head Bolts
1992/01/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valves
1693 DIESEL TRUCK ENGINE
Cylinder Head
1693 DIESEL TRUCK ENGINE
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Disassembly and Assembly
Precombustion Chambers
1693 DIESEL TRUCK ENGINE
Cylinder Head And Spacer Plate
1693 DIESEL TRUCK ENGINE
Valves
1693 DIESEL TRUCK ENGINE
Valve Guides
1693 DIESEL TRUCK ENGINE
Valve Seat Inserts
1693 DIESEL TRUCK ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves {1105}
1990/05/28
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Correct Washers With Cylinder Head Bolts{1100}
1992/01/20
Specifications
Vibration Damper
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Pulley And Vibration Damper
1693 DIESEL TRUCK ENGINE
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Accessory Drive
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Accessory Drive, Turbocharger
1693 DIESEL TRUCK ENGINE
Accessory Drive
1693 DIESEL TRUCK ENGINE
Service Magazine
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Specifications
Accessory Drive
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Accessory Drive, Turbocharger
1693 DIESEL TRUCK ENGINE
Accessory Drive
1693 DIESEL TRUCK ENGINE
Specifications
Fan Drive
1693 DIESEL TRUCK ENGINE
Truck Engine News
Water Pump Impellers Can Be Reconditioned
1983/03/02
Engine News
New Housing And Impeller Assembly For Water Pump And Drive Group
1977/11/30
Disassembly and Assembly
Water Pump
1693 DIESEL TRUCK ENGINE
Service Magazine
Water Pump Impellers Can Be Reconditioned{0661,1361}
1983/01/10
New Housing And Impeller Assembly For Water Pump And Drive Group{1361}
1977/11/21
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Specifications
Flywheel And Timing Gear Housing
1693 DIESEL TRUCK ENGINE
Flywheel Runout
1693 DIESEL TRUCK ENGINE
Flywheel Housing Runout<BR> Face Runout (axial eccentricity) of the Flywheel Housing:
1693 DIESEL TRUCK ENGINE
Flywheel Housing Bore
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Flywheel
1693 DIESEL TRUCK ENGINE
Flywheel Housing
1693 DIESEL TRUCK ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Labyrinth-Type Seal Ring Available For Rear Power Takeoff{3055}
1983/04/04
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again
1977/05/13
Specifications
Flywheel And Timing Gear Housing
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Timing Gears
1693 DIESEL TRUCK ENGINE
Timing Gear Plate
1693 DIESEL TRUCK ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Labyrinth-Type Seal Ring Available For Rear Power Takeoff{3055}
1983/04/04
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Engine News
New Flange-Type Seal Used At Rear Of Crankshaft
1978/08/16
Specifications
Flywheel Housing Runout<BR> Face Runout (axial eccentricity) of the Flywheel Housing:
1693 DIESEL TRUCK ENGINE
Flywheel Housing Bore
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Crankshaft Rear Seal
1693 DIESEL TRUCK ENGINE
Flywheel Housing
1693 DIESEL TRUCK ENGINE
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Flange-Type Seal Used At Rear Of Crankshaft{1161}
1978/07/10
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Engine News
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again
1977/05/13
Specifications
Flywheel And Timing Gear Housing
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Crankshaft Front Seal
1693 DIESEL TRUCK ENGINE
Front Cover
1693 DIESEL TRUCK ENGINE
Timing Gear Plate
1693 DIESEL TRUCK ENGINE
Service Magazine
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Inspection Marks On Bearings
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Crankshaft Has Step At Front Of No. 1 Main Bearing Journal
1983/01/26
Water Pump Impellers Can Be Reconditioned
1983/03/02
Engine Valve Stem &quot;use Again &quot; Specifications
1983/03/02
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Engine Timing Indicator Group Available
1986/07/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves
1990/06/01
Use Correct Washers With Cylinder Head Bolts
1992/01/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings
1980/08/13
Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal
1980/10/22
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor
1977/03/15
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again
1977/05/13
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy
1977/11/09
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
New Flange-Type Seal Used At Rear Of Crankshaft
1978/08/16
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 7N142 Seal Group{1160}
Installation Of 7N142 Seal Group{1160}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Valves
1693 DIESEL TRUCK ENGINE
Cylinder Head
1693 DIESEL TRUCK ENGINE
V-Belt Tension Chart
1693 DIESEL TRUCK ENGINE
Crankshaft
1693 DIESEL TRUCK ENGINE
Bearing Surface (Journal)
1693 DIESEL TRUCK ENGINE
Vibration Damper
1693 DIESEL TRUCK ENGINE
Flywheel And Timing Gear Housing
1693 DIESEL TRUCK ENGINE
Flywheel Runout
1693 DIESEL TRUCK ENGINE
Flywheel Housing Runout<BR> Face Runout (axial eccentricity) of the Flywheel Housing:
1693 DIESEL TRUCK ENGINE
Flywheel Housing Bore
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Pulley And Vibration Damper
1693 DIESEL TRUCK ENGINE
Crankshaft Front Seal
1693 DIESEL TRUCK ENGINE
Front Cover
1693 DIESEL TRUCK ENGINE
Oil Pan
1693 DIESEL TRUCK ENGINE
Valve Lifters
1693 DIESEL TRUCK ENGINE
Precombustion Chambers
1693 DIESEL TRUCK ENGINE
Cylinder Head And Spacer Plate
1693 DIESEL TRUCK ENGINE
Valves
1693 DIESEL TRUCK ENGINE
Valve Guides
1693 DIESEL TRUCK ENGINE
Valve Seat Inserts
1693 DIESEL TRUCK ENGINE
Cylinder Liners
1693 DIESEL TRUCK ENGINE
Flywheel
1693 DIESEL TRUCK ENGINE
Crankshaft Rear Seal
1693 DIESEL TRUCK ENGINE
Flywheel Housing
1693 DIESEL TRUCK ENGINE
Timing Gears
1693 DIESEL TRUCK ENGINE
Timing Gear Plate
1693 DIESEL TRUCK ENGINE
Crankshaft Main Bearings
1693 DIESEL TRUCK ENGINE
Crankshaft
1693 DIESEL TRUCK ENGINE
Service Magazine
Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal{1202}
1980/10/20
Do Not Use &quot;V&quot; Mark As Reference To Install Pistons With Keystone-Type Rings{1214,1215}
1981/12/07
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Labyrinth-Type Seal Ring Available For Rear Power Takeoff{3055}
1983/04/04
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor{1065}
1977/02/28
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Flange-Type Seal Used At Rear Of Crankshaft{1161}
1978/07/10
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Correct Washers With Cylinder Head Bolts{1100}
1992/01/20
Disassembly and Assembly
Oil Pan
1693 DIESEL TRUCK ENGINE
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Truck Engine News
Inspection Marks On Bearings
1982/05/19
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Parts Service Information For Pistons And Rings
1983/01/26
Reuse Of Engine Bearings
1983/12/21
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/11/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
New Guidelines for Inspecting Pistons {1214}
2006/01/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings
1980/08/13
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor
1977/03/15
New Piston Group Has Improved Iron Band In The Piston Body
1977/10/26
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy
1977/11/09
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Specifications
Piston And Rings
1693 DIESEL TRUCK ENGINE
Connecting Rod
1693 DIESEL TRUCK ENGINE
Connecting Rod Bearings
1693 DIESEL TRUCK ENGINE
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Disassembly and Assembly
Connecting Rod Bearings
1693 DIESEL TRUCK ENGINE
Pistons
1693 DIESEL TRUCK ENGINE
Service Magazine
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04
Do Not Use &quot;V&quot; Mark As Reference To Install Pistons With Keystone-Type Rings{1214,1215}
1981/12/07
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor{1065}
1977/02/28
New Piston Group Has Improved Iron Band In The Piston Body{1214}
1977/10/24
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Labyrinth-Type Seal Ring Available For Rear Power Takeoff{3055}
1983/04/04
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Vibration Damper
1693 DIESEL TRUCK ENGINE
Disassembly and Assembly
Pulley And Vibration Damper
1693 DIESEL TRUCK ENGINE
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Truck Engine News
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
V-Belt Tension Chart
1693 DIESEL TRUCK ENGINE
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Disassembly and Assembly
Valve Lifters
1693 DIESEL TRUCK ENGINE
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23
Do Not Use Heli-Coils&reg; To Repair Rocker Arm Assemblies On 5.4&quot; Bore Engines {1123}
1988/12/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.