BASIC ENGINE
PAN GP-OILDRIVE GP-AUXILIARY
DRIVE GP-FAN
DRIVE GP-PUMP
BASIC ENGINE
PAN GP-OIL#UEG0119S0230
9L-2360: OIL PAN GROUP
9L2360 OIL PAN GROUP--Front Sump
Only separate parts serviced
Only separate parts serviced
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [37] | BOLT | ||
| 2. | [45] | LOCKWASHER | ||
| 3. | [41] | WASHER | ||
| 4. | [2] | BOLT | ||
| 5. | [4] | NUT | ||
| 6. | [1] | GASKET | ||
| 7. | [1] | SUPPORT | ||
| 8. | [6] | BOLT | ||
| 9. | [4] | LOCK | ||
| 10. | [1] | TUBE ASSEM. | ||
| 11. | [1] | GAUGE ASSEM. | ||
| 12. | [1] | COVER | ||
| [2] | GASKET | |||
| 13. | [1] | TUBE ASSEM. | ||
| 14. | [6] | BOLT | ||
| [6] | LOCK | |||
| [6] | NUT | |||
| 15. | [1] | SCREEN ASSEM. | ||
| 16. | [1] | TUBE ASSEM. | ||
| 17. | [2] | PLUG | ||
| 18. | [1] | CLAMP | ||
| 19. | [1] | OIL PAN | ||
| 20. | [1] | GASKET | ||
| 21. | [2] | BOLT (3.75" long) | ||
| [1] | BOLT (2.75" long) | |||
#UEG0119S0231
9L-2420: AUXILIARY SINGLE DRIVE PULLEY GROUP
9L2420 AUXILIARY SINGLE DRIVE PULLEY GROUP
Drive Pulley cannot be used with a 28" Diameter Fan when Crankshaft
centerline to Fan centerline is less than 18"
Only separate parts serviced
Drive Pulley cannot be used with a 28" Diameter Fan when Crankshaft
centerline to Fan centerline is less than 18"
Only separate parts serviced
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS#UEG0119S0232
9L-2421: AUXILIARY DOUBLE DRIVE PULLEY GROUP
9L2421 AUXILIARY DOUBLE DRIVE PULLEY GROUP
Drive Pulley cannot be used with a 28" Diameter Fan when Crankshaft
centerline to Fan centerline is less than 18"
Only separate parts serviced
Drive Pulley cannot be used with a 28" Diameter Fan when Crankshaft
centerline to Fan centerline is less than 18"
Only separate parts serviced
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS#UEG0119S0233
9L-6075: FAN DRIVE GROUP
9L6075 FAN DRIVE GROUP (1:1 Ratio)
Serial No. 65B1782-Up. FOR USE WITH TURBOCHARGED TRUCK ENGINE
WITH A 8" DIAMETER CRANKSHAFT PULLEY AND 17.37" FAN TO
CRANKSHAFT CENTER DISTANCE. Provides .600" wide rear groove on Fan
Pulley for Freon Compressor Drive
Serial No. 65B1782-Up. FOR USE WITH TURBOCHARGED TRUCK ENGINE
WITH A 8" DIAMETER CRANKSHAFT PULLEY AND 17.37" FAN TO
CRANKSHAFT CENTER DISTANCE. Provides .600" wide rear groove on Fan
Pulley for Freon Compressor Drive
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-5595 | [1] | BOLT | |
| 2. | 9L-5598 | [1] | BRACKET ASSEM. | |
| (Rotate Bracket Assem. 180 degrees for FAN CENTERS OF 17.5" AND 20.5") | ||||
| 3. | 0T-0772 | [4] | BOLT | |
| 3B-4507 | [4] | LOCKWASHER | ||
| 2S-0932 | [4] | WASHER | ||
| 4. | 9L-1630 | [1] | VEE BELT SET | |
| (Consists of 3 Belts) | ||||
| 5. | 9L-6067 | [1] | PULLEY | |
| 6. | 3B-8485 | [1] | FITTING | |
| 7. | 6L-2324 | [1] | WASHER | |
| 10. | 9L-5602 | [1] | HUB | |
| 11. | 4B-4550 | [1] | FITTING | |
| 12. | 2B-2695 | [2] | BOLT | |
| 13. | 5B-3390 | [1] | LOCK | |
| 14. | 0S-1618 | [2] | BOLT | |
| 3B-4505 | [2] | LOCKWASHER | ||
| 4B-4277 | [1] | WASHER | ||
| 15. | 9L-2006 | [1] | GASKET | |
| 16. | 6L-4704 | [1] | SPACER | |
| 17. | 8H-9789 | [2] | BEARING | |
| 18. | 1B-2257 | [1] | SEAL | |
| 19. | 9L-5594 | [1] | SPACER | |
| 20. | 0S-1590 | [2] | BOLT | |
| 3B-4506 | [2] | LOCKWASHER | ||
| 21. | 2B-0947 | [2] | BOLT | |
| 3B-4508 | [2] | LOCKWASHER | ||
#UEG0119S0234
9L-6077: FAN DRIVE GROUP
9L6077 FAN DRIVE GROUP (1:1 Ratio)
Serial No. 65B1782-Up. FOR USE WITH TURBOCHARGED-AFTERCOOLED
TRUCK ENGINE WITH 8.75" DIAMETER CRANKSHAFT PULLEY AND 17.37"
FAN TO CRANKSHAFT CENTER DISTANCE. Provides .600" wide rear groove
on Fan Pulley for Freon Compressor Drive
Serial No. 65B1782-Up. FOR USE WITH TURBOCHARGED-AFTERCOOLED
TRUCK ENGINE WITH 8.75" DIAMETER CRANKSHAFT PULLEY AND 17.37"
FAN TO CRANKSHAFT CENTER DISTANCE. Provides .600" wide rear groove
on Fan Pulley for Freon Compressor Drive
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-5595 | [1] | BOLT | |
| 2. | 9L-5598 | BRACKET ASSEM. | ||
| (Rotate Bracket Assem. 180 degrees for FAN CENTERS OF 17.5" AND 20.5") | ||||
| 3. | 0T-0772 | [4] | BOLT | |
| 3B-4507 | [4] | LOCKWASHER | ||
| 2S-0932 | [4] | WASHER | ||
| 4. | 9L-6080 | [1] | VEE BELT SET | |
| (Consists of 3 Belts) | ||||
| 5. | 9L-6068 | [1] | PULLEY | |
| 6. | 3B-8485 | [1] | FITTING | |
| 7. | 6L-2324 | [1] | WASHER | |
| 10. | 9L-5602 | [1] | HUB | |
| 11. | 4B-4550 | [1] | FITTING | |
| 12. | 2B-2695 | [2] | BOLT | |
| 13. | 5B-3390 | [1] | LOCK | |
| 14. | 0S-1618 | [2] | BOLT | |
| 3B-4505 | [2] | LOCKWASHER | ||
| 4B-4277 | [2] | WASHER | ||
| 15. | 9L-2006 | [1] | GASKET | |
| 16. | 6L-4704 | [1] | SPACER | |
| 17. | 8H-9789 | [2] | BEARING | |
| 18. | 1B-2257 | [1] | SEAL | |
| 19. | 9L-5594 | [1] | SPACER | |
| 20. | 0S-1590 | [2] | BOLT | |
| 3B-4506 | [2] | LOCKWASHER | ||
| 21. | 2B-0947 | [2] | BOLT | |
| 3B-4508 | [2] | LOCKWASHER | ||
#UEG0119S0235
9L-6374: FAN DRIVE GROUP
9L6374 FAN DRIVE GROUP
Serial No. 65B1782-Up. Note: Provides 1.118 to 1 Ratio on Turbocharged
Engines or 1.223 to 1 Ratio on Turbocharged-Aftercooled Engines
Only separate parts serviced
Serial No. 65B1782-Up. Note: Provides 1.118 to 1 Ratio on Turbocharged
Engines or 1.223 to 1 Ratio on Turbocharged-Aftercooled Engines
Only separate parts serviced
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-5595 | [1] | BOLT | |
| 2. | 9L-5598 | [1] | BRACKET ASSEM. | |
| 3. | 0T-0772 | [4] | BOLT | |
| 3B-4507 | [4] | LOCKWASHER | ||
| 2S-0932 | [4] | WASHER | ||
| 4. | 6L-4704 | [1] | SPACER | |
| 5. | 9L-5077 | [1] | PULLEY | |
| 6. | 3B-8485 | [1] | FITTING | |
| 7. | 6L-2324 | [1] | WASHER | |
| 8. | 8H-9789 | [2] | BEARING | |
| 9. | 1B-2257 | [1] | SEAL | |
| 10. | 9L-2003 | [1] | HUB | |
| 11. | 4B-4550 | [1] | FITTING | |
| 12. | 2B-2695 | [2] | BOLT | |
| 13. | 5B-3390 | [1] | LOCK | |
| 14. | 0S-1618 | [2] | BOLT | |
| 3B-4505 | [2] | LOCKWASHER | ||
| 4B-4277 | [2] | WASHER | ||
| 15. | 9L-2006 | [1] | GASKET |
#UEG0119S0236
9L-6372: FAN DRIVE GROUP
9L6372 FAN DRIVE GROUP
Serial No. 65B1782-Up. Note: Provides 1.09 to 1 Ratio on Turbocharged
Engines or 1 to 1 Ratio on Turbocharged-Aftercooled Engines
Only separate parts serviced
Serial No. 65B1782-Up. Note: Provides 1.09 to 1 Ratio on Turbocharged
Engines or 1 to 1 Ratio on Turbocharged-Aftercooled Engines
Only separate parts serviced
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-5595 | [1] | BOLT | |
| 2. | 9L-5598 | [1] | BRACKET ASSEM. | |
| 3. | 0T-0772 | [4] | BOLT | |
| 3B-4507 | [4] | LOCKWASHER | ||
| 2S-0932 | [4] | WASHER | ||
| 4. | 6L-4704 | [1] | SPACER | |
| 5. | 9L-6068 | [1] | PULLEY | |
| 6. | 3B-8485 | [1] | FITTING | |
| 7. | 6L-2324 | [1] | WASHER | |
| 8. | 8H-9789 | [2] | BEARING | |
| 9. | 1B-2257 | [1] | SEAL | |
| 10. | 9L-5602 | [1] | HUB | |
| 11. | 4B-4550 | [1] | FITTING | |
| 12. | 2B-2695 | [2] | BOLT | |
| 13. | 5B-3390 | [1] | LOCK | |
| 14. | 0S-1618 | [2] | BOLT | |
| 3B-4505 | [2] | LOCKWASHER | ||
| 4B-4277 | [1] | WASHER | ||
| 15. | 9L-2006 | [1] | GASKET |
#UEG0119S0237
3N-7194: FAN DRIVE GROUP
3N7194 FAN DRIVE GROUP--Factory Installation
Serial No. 65B2098-Up
Serial No. 65B2098-Up
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-4550 | [1] | FITTING (pressure relief) | |
| 2. | 9L-5595 | [1] | BOLT | |
| 3. | 0T-0772 | [4] | BOLT | |
| 3B-4507 | [4] | LOCKWASHER | ||
| 2S-0932 | [4] | WASHER | ||
| 4. | 7M-4236 | [1] | SEAL | |
| 5. | 0S-1591 | [6] | BOLT | |
| 6. | 3B-4506 | [8] | LOCKWASHER | |
| 7. | 2N-7506 | [1] | SPACER | |
| 8. | 6H-1717 | [6] | BOLT | |
| 9. | 3B-4508 | [8] | LOCKWASHER | |
| 10. | 3N-0680 | [1] | CARRIER ASSEM. | |
| 11. | 2N-7507 | [1] | WASHER | |
| 12. | 1B-1293 | [2] | BOLT | |
| 2N-7508 | [1] | LOCK | ||
| 13. | 4N-5283 | [1] | HUB | |
| 14. | 5H-7704 | [1] | SEAL | |
| 15. | 3B-8489 | [1] | FITTING (grease) | |
| 16. | 2H-3712 | [2] | BEARING | |
| 17. | 3N-7250 | [1] | PULLEY | |
| 18. | 9L-4266 | [1] | VEE BELT SET (3 belts) | |
| 19. | 5M-6214 | [1] | PLUG | |
| 20. | 3N-7249 | [1] | SHAFT ASSEM. | |
| 21. | 9L-5594 | [1] | SPACER | |
| 22. | 0S-1590 | [2] | BOLT | |
| 23. | 2B-0947 | [2] | BOLT |
#UEG0119S0238
9L-5876: HYDRAULIC PUMP DRIVE GROUP
9L5876 HYDRAULIC PUMP DRIVE GROUP
Serial No. 65B782-Up
FOR USE WITH VICKERS V20 POWER STEERING PUMP
Serial No. 65B782-Up
FOR USE WITH VICKERS V20 POWER STEERING PUMP
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS#UEG0119S0239
9L-2445: HYDRAULIC PUMP DRIVE GROUP
9L2445 HYDRAULIC PUMP DRIVE GROUP--Rear
Serial No. 65B1 to 65B781 inclusive. For use with V200 Vickers Hydraulic
Pump, R.H. Rotation with No. 11 splined shaft
Pump speed to Engine speed, 1.05:1 Ratio
Serial No. 65B1 to 65B781 inclusive. For use with V200 Vickers Hydraulic
Pump, R.H. Rotation with No. 11 splined shaft
Pump speed to Engine speed, 1.05:1 Ratio
Parts for your 1693 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9L-2444 | [1] | PLATE | ||
| 9L-1532 | [1] | GASKET | ||
| 9L-2348 | [1] | ADAPTER ASSEM. | ||
| 5B-9603 | [1] | BOLT (5" LONG) | ||
| 1D-4717 | [2] | NUT | ||
| 2M-4779 | [2] | STUD | ||
| (USED WITH HYDRAULIC PUMP) | ||||
| (PART OF ADAPTER ASSEM. 9L2348) | ||||
| 3B-4506 | [2] | LOCKWASHER | ||
| 5B-2638 | [2] | BOLT (5.25" LONG) | ||
| 8B-1312 | [2] | DOWEL | ||
| (PART OF ADAPTER ASSEM. 9L2348) | ||||
| 0S-1594 | [1] | BOLT (1" LONG) | ||
| 9L-1633 | [1] | GASKET | ||
| 0S-1588 | [2] | BOLT (1.25" LONG) | ||
| 2A-0762 | [3] | BOLT | ||
| 7F-2836 | [3] | LOCK | ||
| 9L-2578 | [1] | RETAINER | ||
| 9L-2341 | [1] | GEAR (19 TEETH) | ||
Information:
BASIC ENGINE
PAN GP-OIL
Disassembly and Assembly
Service Magazine