HYDRAULIC SYSTEM
LINES GP-HYDRAULICOPERATOR STATION
SEAT GPHYDRAULIC SYSTEM
ACCUMULATOR GPHYDRAULIC SYSTEM
LINES GP-HYDRAULIC#UEG0139S0550
6J-6664: ACCUMULATOR LINES GROUP
6J6664 ACCUMULATOR LINES GROUP
Serial No. 68K570, 572, 577 to 579, 581, 583 to 585, 587 to 593, 595, 608 to 610, 612, 613, 617 to 630,
633 to 637, 639, 640, 643, 645 to 650, 652 to 674, 676 to 678, 680 to 682, 684 to 686, 688, 689, 691 to
694, 696 and 68K697 inclusive. Refer also to Page 207A for special parts
Serial No. 68K570, 572, 577 to 579, 581, 583 to 585, 587 to 593, 595, 608 to 610, 612, 613, 617 to 630,
633 to 637, 639, 640, 643, 645 to 650, 652 to 674, 676 to 678, 680 to 682, 684 to 686, 688, 689, 691 to
694, 696 and 68K697 inclusive. Refer also to Page 207A for special parts
Parts for your 657B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6J-7512 | [1] | STRAP | |
| 2. | 0S-1595 | [2] | BOLT | |
| 4B-4280 | [2] | WASHER | ||
| 3. | 3B-4508 | [6] | LOCKWASHER | |
| 4. | 1D-4609 | [2] | BOLT | |
| 1B-4331 | [2] | NUT | ||
| 3B-4512 | [2] | LOCKWASHER | ||
| 8S-8927 | [1] | HOSE ASSEM. | ||
| 5. | 8S-9348 H | HOSE 207.5" | ||
| (Angle Orientation 0 Degrees) | ||||
| 6. | 7S-9790 | [1] | STEM ASSEM. | |
| 7. | 3S-8580 | [1] | STEM ASSEM. | |
| 8. | 3S-7116 | [2] | SLEEVE | |
| 9. | 7D-1553 | [2] | CLIP | |
| 10. | 0S-0509 | [1] | BOLT | |
| 11. | 3B-4506 | [4] | LOCKWASHER | |
| 12. | 0S-1608 | [1] | BOLT | |
| 1D-4717 | [1] | NUT | ||
| 9F-3526 | [1] | SPACER | ||
| 4B-4278 | [1] | WASHER | ||
| 13. | 7J-8714 | [2] | CLIP | |
| 14. | 1D-4703 | [4] | BOLT | |
| 15. | 3B-4507 | [8] | LOCKWASHER | |
| 16. | 3H-3667 | [2] | FLANGE | |
| 17. | 6J-3625 | [1] | SEAL | |
| 18. | 6J-3650 | [2] | SEAL | |
| 19. | 0S-1585 | [4] | BOLT | |
| 20. | 3H-4330 | [2] | FLANGE | |
| 21. | 5J-2302 | [1] | PLATE | |
| 22. | 0S-1594 | [2] | BOLT | |
| 23. | 7J-2536 | [1] | TUBE ASSEM. | |
| 24. | 3B-8428 | [4] | BOLT | |
| H | ORDER BY THE INCH | |||
#UEG0139S0551
6J-6664: ACCUMULATOR LINES GROUP
6J6664 ACCUMULATOR LINES GROUP
Serial No. 68K698 to 68K717 inclusive
Serial No. 68K698 to 68K717 inclusive
Parts for your 657B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6J-7512 | [1] | STRAP | |
| 2. | 0S-1595 | [2] | BOLT | |
| 3. | 3B-4508 C | [11] | LOCKWASHER | |
| 4. | 1D-4609 | [2] | BOLT | |
| 1B-4331 | [2] | NUT | ||
| 3B-4512 | [2] | LOCKWASHER | ||
| 5. | 8J-3419 C | [1] | HOSE ASSEM. | |
| 8S-9348 H | HOSE 236.5" | |||
| 6. | 3S-8569 | [1] | STEM ASSEM. (30 degrees) | |
| 7. | 3S-8573 | [1] | STEM ASSEM. (90 degrees) | |
| 8. | 3S-7116 | [2] | SLEEVE | |
| 9. | 1D-4720 C | [1] | NUT | |
| 10. | 0S-1569 C | [1] | BOLT | |
| 11. | 9S-1366 C | [4] | BOLT | |
| 12. | 2A-1531 | [1] | BOLT | |
| 1D-4719 | [1] | NUT | ||
| 13. | 6J-7758 | [2] | CLAMP | |
| 14. | 1D-4703 | [4] | BOLT | |
| 15. | 3B-4510 C | [1] | LOCKWASHER | |
| 16. | 1P-4578 C | [4] | FLANGE | |
| 17. | 4J-0522 C | [2] | SEAL | |
| 18. | 3H-5368 C | [4] | BOLT | |
| 19. | 8J-3416 C | [2] | CLAMP | |
| 20. | 0S-1587 C | [4] | BOLT | |
| 21. | 8J-3415 C | [2] | GROMMET | |
| 22. | 8J-3417 C | [2] | PLATE | |
| 23. | 4B-4280 | [3] | WASHER | |
| C | INDICATES CHANGE | |||
| H | ORDER BY THE INCH | |||
#UEG0139S0552
6J-6664: ACCUMULATOR LINES GROUP
6J6664 ACCUMULATOR LINES GROUP
Serial No. 68K718, 721 to 729, 731 to 733, 735 to 739, 741 to 743, 745, 747, 748, 751,
753 to 755, 757, 759, 760, 763 to 772, 775, 777, 779, 781 to 784, 786, 787, 789 to 795,
797, 798, 800, 804, 806, 809, 813 to 819 and 68K839 inclusive
Serial No. 68K718, 721 to 729, 731 to 733, 735 to 739, 741 to 743, 745, 747, 748, 751,
753 to 755, 757, 759, 760, 763 to 772, 775, 777, 779, 781 to 784, 786, 787, 789 to 795,
797, 798, 800, 804, 806, 809, 813 to 819 and 68K839 inclusive
Parts for your 657B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | STRAP | ||
| 2. | 0S-1595 | [2] | BOLT | |
| 3. | 3B-4508 C | [13] | LOCKWASHER | |
| 4. | 1D-4609 | [2] | BOLT | |
| 1B-4331 | [2] | NUT | ||
| 3B-4512 | [2] | LOCKWASHER | ||
| 5. | 8J-7683 C | [1] | HOSE ASSEM. | |
| 8S-9348 H | HOSE 102 in. | |||
| 6. | 3S-8569 | [1] | STEM ASSEM. (30 degrees) | |
| 7. | 3S-8573 | [1] | STEM ASSEM. (90 degrees) | |
| 8. | 3S-7116 | [4] | SLEEVE | |
| 9. | 8S-9348 H | HOSE 137 in. | ||
| 10. | 2P-1315 | [1] | STEM ASSEM. | |
| 11. | 9S-1366 | [4] | BOLT | |
| 12. | 2A-1531 | [1] | BOLT | |
| 1D-4719 | [1] | NUT | ||
| 13. | 8J-7663 C | [1] | CLAMP | |
| 14. | 1D-4703 | [4] | BOLT | |
| 15. | 1A-1460 C | [2] | BOLT | |
| 16. | 1P-4578 | [4] | FLANGE | |
| 17. | 4J-0522 | [2] | SEAL | |
| 18. | 3H-5368 | [4] | BOLT | |
| 19. | 8J-3416 | [2] | CLAMP | |
| 20. | 0S-1587 | [4] | BOLT | |
| 21. | 8J-3415 | [2] | GROMMET | |
| 22. | 8J-3417 | [2] | PLATE | |
| 23. | 4B-4280 | [3] | WASHER | |
| C | INDICATES CHANGE | |||
| H | ORDER BY THE INCH | |||
#UEG0139S0553
6J-6664: ACCUMULATOR LINES GROUP
6J6664 ACCUMULATOR LINES GROUP
Serial No. 68K719, 720, 730, 734, 740, 744, 746, 749, 750, 752, 756, 758, 761, 762, 773,
774, 776, 778, 780, 785, 788, 796, 799, 801 to 803, 805, 807, 808, 810 to 812, 820 to 838
and 68K840-Up
Serial No. 68K719, 720, 730, 734, 740, 744, 746, 749, 750, 752, 756, 758, 761, 762, 773,
774, 776, 778, 780, 785, 788, 796, 799, 801 to 803, 805, 807, 808, 810 to 812, 820 to 838
and 68K840-Up
Parts for your 657B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | STRAP | ||
| 2. | 0S-1595 | [2] | BOLT | |
| 3. | 3B-4508 C | [7] | LOCKWASHER | |
| 4. | 1D-4609 | [2] | BOLT | |
| 1B-4331 | [2] | NUT | ||
| 3B-4512 | [2] | LOCKWASHER | ||
| 5. | 9J-1115 C | [1] | HOSE ASSEM. | |
| (Includes) | ||||
| 5P-0182 H | HOSE 264.16 cm(104 in.) | |||
| 6. | 3S-8569 | [1] | STEM ASSEM. (30 degrees) | |
| 7. | 3S-8573 | [1] | STEM ASSEM. (90 degrees) | |
| 8. | 3S-7116 | [6] | SLEEVE | |
| 9. | 5P-0182 H | HOSE 282.95 cm(111.40 in.) | ||
| 10. | 2P-1315 | [1] | STEM ASSEM. | |
| 11. | J | GUARD 12.06 dm(47.50 in.) | ||
| 12. | 5P-0182 CH | HOSE 53.34 cm(21 in.) | ||
| 13. | 8J-7663 C | [2] | CLAMP | |
| 14. | 1D-4703 | [4] | BOLT | |
| 15. | 1A-1460 C | [4] | BOLT | |
| 16. | 1P-4578 | [4] | FLANGE | |
| 17. | 4J-0522 | [2] | SEAL | |
| 18. | 3H-5368 | [4] | BOLT | |
| 19. | 9J-1143 C | [1] | CLAMP | |
| 20. | 4B-4280 | [3] | WASHER | |
| 21. | 4B-4279 C | [8] | WASHER | |
| 22. | 6J-7758 C | [2] | CLAMP | |
| 23. | 2A-1531 | [1] | BOLT | |
| 1D-4719 | [1] | NUT | ||
| C | INDICATES CHANGE | |||
| J | ORDER BY THE DECIMETRE | |||
| H | ORDER BY THE CENTIMETRE | |||
#UEG0139S0554
7D-2269: SEAT SUSPENSION GROUP
7D2269 SEAT SUSPENSION GROUP
Serial No. 68K1 to 68K845 inclusive
Part of Seat Frame and Platform shown on Page 180C
Serial No. 68K1 to 68K845 inclusive
Part of Seat Frame and Platform shown on Page 180C
Parts for your 657B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5H-3182 | [2] | PIN | |
| 2. | 5D-9204 | [1] | SPRING ASSEM. | |
| 2D-8985 | [1] | RIVET | ||
| 3. | 2D-7166 | [2] | BEARING | |
| 4. | 3D-9131 | [3] | PIN | |
| (Parts of 5D9204 Spring Assem.) | ||||
| 5. | 2D-8579 | [1] | SUPPORT | |
| 6. | 0S-1594 | [2] | BOLT | |
| 1D-4717 | [2] | NUT | ||
| 3B-4506 | [2] | LOCKWASHER | ||
| 2D-8568 | [1] | ADJUSTER ASSEM. | ||
| 7. | 2D-8573 | [1] | COVER | |
| 8. | 2D-8572 | [1] | HANDLE ASSEM. | |
| 9. | 4H-8380 | [1] | PIN | |
| 10. | 2D-8575 | [1] | YOKE ASSEM. | |
| 2D-8576 | [1] | BEARING | ||
| (Part of 2D8575 Yoke Assem.) | ||||
| 11. | 2D-8567 | [1] | SCREW ASSEM. | |
| 2D-8574 | [1] | BRAKE ASSEM. | ||
| 12. | 7D-2987 | [1] | LEVER ASSEM. | |
| 13. | 2D-7166 | [1] | BEARING | |
| 14. | 2D-7171 | [1] | BEARING | |
| (Parts of 7D2987 Lever Assem.) | ||||
| 15. | 2D-7179 | [1] | SHAFT | |
| 16. | 7D-4366 | [1] | BEARING | |
#UEG0139S0555
8D-9925: SEAT GP
8D9925 SEAT GROUP
Serial No. 68K830 to 68K845 inclusive
Part of Seat Frame and Platform shown on Page 180B
Serial No. 68K830 to 68K845 inclusive
Part of Seat Frame and Platform shown on Page 180B
Parts for your 657B WHEEL TRACTOR:
CATERPILLAR SIS#UEG0139S0556
8D-8920: SEAT GP
Parts for your 657B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-2628 | [1] | PUMP | |
| 2. | 9D-2631 | [1] | CUSHION ASSEM. | |
| 9D-2629 | [2] | BUMPER | ||
| 4B-1256 | [2] | SCREW | ||
| 3. | 9D-2626 | [1] | CUSHION | |
| 4. | 9D-2633 | [1] | PANEL ASSEM. | |
| 5. | 9D-2634 | [1] | VALVE | |
| 6. | 9D-2627 | [1] | VALVE & ROCKER ASSEM. | |
| 7. | 9D-2632 | [1] | ACCUMULATOR | |
| THE FOLLOWING REPAIR KITS ARE AVAILABLE: | ||||
| 9D-2636 | [1] | KIT (Hose) | ||
| (Consists of Hose Assems.) | ||||
| 9D-2637 | [1] | KIT (Spring) | ||
| (Consists of Springs) | ||||
| 9D-2638 | [1] | KIT (Bearing) | ||
| (Consists of Bearings) | ||||
| 9D-2639 | [1] | KIT (Seat Cylinder) | ||
| (Consists of Cylinder, Washers, Nuts and Dust Cover) | ||||
#UEG0139S0557
2G-0600: POWER SOURCE SEAT CONVERSION GROUP
2G600 POWER SOURCE SEAT CONVERSION GROUP
Serial No. 68K846-Up
For Field Replacement of 9D2628 Pump Group shown on Page 177B
Serial No. 68K846-Up
For Field Replacement of 9D2628 Pump Group shown on Page 177B
Parts for your 657B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9J-6514 Y | [1] | VALVE ASSEMBLY | ||
| MOUNT IN CONVENIENT LOCATION ON TOP OF DIFFERENTIAL CASE BENEATH HITCH AND TO THE RIGHT OF THE MACHINE CENTERLINE IN SUCH A MANNER THAT HOSE ASSEMBLY 5D1258 WILL REACH THE HYDRAULIC TANK AND ASSUMULATOR LINE | ||||
| 3B-4505 | [2] | LOCKWASHER TO BOLT | ||
| 3B-6553 H | [1] | ELBOW TO ADAPTER | ||
| 4B-4277 | [2] | WASHER TO BOLT | ||
| 1D-4538 | [2] | BOLT TO VALVE | ||
| 1D-4707 H | [4] | BOLT ADAPTER TO ACCUMULATOR | ||
| 1D-4716 | [2] | NUT TO BOLT | ||
| 4D-6880 | [1] | HOSE ASSEMBLY TO TEE IN RETURN PORT OF PRESSURE REDUCING VALVE | ||
| 4D-6880 | [1] | HOSE ASSEMBLY TO CONNECTOR | ||
| 5D-1258 | [1] | HOSE ASSEMBLY TO 5H4778 UNION | ||
| 5D-7377 | [1] | FITTING TO HOSE ASSEMBLY TO REG. PORT ON 9J6514 VALVE ASSEMBLY | ||
| 5D-7377 | [1] | FITTING TO PRESSURE PORT ON 9J6514 VALVE ASSEMBLY | ||
| 5D-9522 | [1] | FITTING TO HOSE ASSEMBLY | ||
| 6D-6001 | [1] | HOSE ASSEMBLY TO FITTING (IF HOSE IS TOO LONG for particular installation coil excess and retain away from moving parts) | ||
| 7F-8698 H | [4] | BOLT ADAPTER TO CHARGING VALVE | ||
| 2H-9233 H | [2] | SPACER | ||
| 4H-6147 | [1] | UNION TO TEE | ||
| 5H-4778 | [1] | UNION TO TEE | ||
| 2J-5907 H | [4] | BOLT ADAPTER TO ACCUMULATOR | ||
| 3J-1907 | [1] | SEAL TO ADAPTER | ||
| 3J-7354 | [1] | SEAL TO ADAPTER 5P2937 | ||
| 6J-0211 | [1] | ADAPTER TO FITTING TO ACCUMULATOR LINE | ||
| 6J-3625 | [1] | SEAL TO ADAPTER | ||
| 4K-8154 | [1] | PLATE TO VALVE TO DIFFERENTIAL CASE | ||
| 3L-6521 | [1] | TEE TO ADAPTER OR ELBOW | ||
| 5P-2937 | [1] | ADAPTER TO TEE TO RETURN PORT ON PRESSURE REDUCING VALVE | ||
| 5P-3501 | [1] | ADAPTER TO TANK | ||
| 3S-6115 | [1] | TEE TO HOSE ASSEMBLY | ||
| 9S-1366 H | [2] | BOLT | ||
| 061-7921 | [1] | CONNECTOR HOSE ASSEMBLY TO RETURN LINE ON BOSTROM SEAT | ||
| 061-7921 | [1] | CONNECTOR TO PRESSURE LINES ON BOSTROM SEAT | ||
| H | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#UEG0139S0558
9J-6514: PRESSURE REDUCING VALVE ASSEMBLY
9J6514 PRESSURE REDUCING VALVE ASSEMBLY
Serial No. 68K846-Up
Part of 2G600 Power Source Seat Conversion Group shown on Page 177B-1
Serial No. 68K846-Up
Part of 2G600 Power Source Seat Conversion Group shown on Page 177B-1
#UEG0139S0559
5J-9231: ACCUMULATOR GROUP
5J9231 ACCUMULATOR GROUP
Parts for your 657B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5J-9053 | [1] | HEAD | |
| 2. | 5J-9230 | [1] | ACCUMULATOR ASSEM. | |
| 3. | 5M-6708 | [1] | WASHER | |
| 4. | 6J-0366 | [1] | VALVE ASSEM. | |
| 5. | [1] | MANIFOLD | ||
| 6. | 0S-1590 | [2] | BOLT | |
| 7. | 3B-4506 | [10] | LOCKWASHER | |
| 8. | 1P-3700 C | [3] | SEAL | |
| 9. | 6J-9356 | [2] | SEAL ASSEM. | |
| 10. | 9J-9319 C | [1] | PISTON | |
| 11. | 7S-0582 | [1] | PLATE (Warning) | |
| 12. | 5J-9222 | [1] | TUBE ASSEM. | |
| 13. | 0S-1588 | [4] | BOLT | |
| 14. | 1J-2176 | [1] | SEAL | |
| 15. | 2J-0744 | [1] | RING | |
| 16. | 1D-4639 | [8] | BOLT | |
| 17. | 9M-2828 | [8] | WASHER | |
| 18. | 5J-9220 | [1] | COVER ASSEM. | |
| 19. | 1M-3381 | [4] | SPACER | |
| 20. | 0S-1571 | [4] | BOLT | |
| C | INDICATES CHANGE | |||
Information:
HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on
Specifications
Scraper Control Valve<BR> (657B: 6J657) (650B & 660B: 6J660) (666B: 6J666) (641B & 651B: 6J4930) (631C & 637: 7J9131) (657B: 8J831) (631C & 637: 9J2056) (660B: 9J2058) (641B, 650B & 651B: 9J2059)
631C, 637C, 641B, 650B, 651B, 660B & 666B WHEEL TRACTOR-SCRA
631C, 637C, 641B, 650B, 651B, 660B & 666B WHEEL TRACTOR-SCRA
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Disassembly and Assembly
Service Magazine
Cushion Hitch Tube Assembly Now Has Smaller Diameter Seal To Prevent Leaks{5317,5313,7107}
1979/10/01
1979/10/01
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
2006/02/13
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
