AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CRANKSHAFT (9S5781 N/S) Serial No. 93N969-Up D7F TRACK-TYPE TRACTOR


BASIC ENGINE
CRANKSHAFT GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
BASIC ENGINE
CRANKSHAFT GP
FLYWHEEL GP
PISTON & ROD GP
FLYWHEEL GP
PISTON & ROD GP
FLYWHEEL GP
OPERATOR STATION
PANEL GP

TRACK-TYPE TRACTOR D7F TRACK-TYPE TRACTOR 93N
 D7F TRACTOR / DIRECT DRIVE / 93N00001-01174 (MACHINE) UEG0169S D7F 93N   (1969)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT
9S-5781 CRANKSHAFT
CRANKSHAFT
9S-5781 CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT
 

#UEG0169S0040
 

9S-5781: CRANKSHAFT

CRANKSHAFT (9S5781 N/S)
Serial No. 93N969-Up
c138727 UEG0169S
9S5781 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-0716 C [2] PLATE  
2. 5S-5871 [1] CRANKSHAFT ASSEM.  
3. 9F-2247 [6] PLUG  
4. 5H-2671 [1] KEY  
5. 4M-9933 [1] GEAR (40 Teeth)  
6. 3S-9730 [7] BEARING  
7. 5S-9021 [1] SEAL  
8. 0S-1595 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
9. 2P-9584 C [1] DAMPER ASSEM.  
10. 2P-4696 C [1] GEAR (76 Teeth)  
11. 9S-5447 [1] PULLEY  
12. 6B-5310 [1] BOLT  
13. 5S-9948 [1] WASHER  
14. 7S-3103 [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0169S0041
 

CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
UEG0169S0041 UEG0169S
None CRANKSHAFT BEARING REPLACEMENT GROUPS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UEG0169S0042
 

GASKET KITS

GASKET KITS
UEG0169S0042 UEG0169S
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-6304 COMPLETE DIESEL ENGINE  
  1P-6305 VALVE GRINDING  
  8S-7057 WATER PUMP  
  1P-6306 FLYWHEEL CLUTCH  
  1P-6307 TRANSMISSION  
  1P-6308 TRANSMISSION OIL SYSTEM  
 

#UEG0169S0043
 

CRANKSHAFT BEARING REPLACEMENT

CRANKSHAFT BEARING REPLACEMENT
UEG0169S0043 UEG0169S
None CRANKSHAFT BEARING REPLACEMENT Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UEG0169S0044
 

9S-5783: FLYWHEEL GP

9S5783 FLYWHEEL GROUP--Type 1
Serial No. 93N1 to 93N968 inclusive
c108389 UEG0169S
9S5783 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-6686 [1] FLYWHEEL ASSEM.  
2. 2S-7037 [1] GEAR (156 Teeth)  
    (Part of 9S6686 Assem.)
3. 0V-0523 [9] BOLT  
  2S-0736 [9] WASHER  
 

#UEG0169S0045
 

9S-8912: PISTON & ROD GP

9S8912 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 93N1 to 93N882 inclusive. Note: 9S8914 Piston and Liner Group,
consisting of: 1--Piston Assembly, 1--Liner and 2--Seal, is available
c222701 UEG0169S
9S8912 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9804 C [1] PIN  
2. 9H-4015 [2] RETAINER  
3. 6N-8061 C [1] ROD ASSEM.  
  7S-9347 [1] BEARING  
4. 1P-9956 [2] BOLT  
  5S-6348 [2] NUT  
5. 7M-7821 [1] BEARING (Standard)  
  2S-0502 [1] BEARING (.010" Undersize)  
  2S-0503 [1] BEARING (.020" Undersize)  
  7M-7826 [1] BEARING (.030" Undersize)  
6. 8N-3183 C [1] PISTON GROUP  
7. 9S-7788 [1] RING (Oil)  
8. 5S-6750 [1] RING (Intermediate)  
9. 7S-8378 [1] RING (Top)  
  7S-9404 [1] RING GROUP  
    (Consists of Complete Set of Rings For One Piston)
  C   INDICATES CHANGE
 

#UEG0169S0046
 

9S-5783: FLYWHEEL GP

FLYWHEEL (9S5783 N/S)--Type 2
Serial No. 93N1 to 93N968 inclusive
c134029 UEG0169S
9S5783 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] FLYWHEEL ASSEM.  
2. [1] GEAR (156 Teeth)  
3. [9] BOLT  
 

#UEG0169S0047
 

9L-4085: CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON (9L4085 N/S)--6 Required
Serial No. 93N883-Up
c112405 UEG0169S
9L4085 CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-6487 [1] PIN  
2. 1S-9543 [2] RETAINER  
3. 5S-2793 [1] ROD ASSEM.  
  7S-9348 [1] BEARING  
4. 1P-9956 [2] BOLT  
  5S-6348 [2] NUT  
5. 7M-7821 [1] BEARING (Standard)  
  2S-0502 [1] BEARING (.010" Undersize)  
  2S-0503 [1] BEARING (.020" Undersize)  
  7M-7826 [1] BEARING (.030" Undersize)  
6. 7S-6792 [1] PISTON ASSEM.  
7. 9S-7788 [1] RING (Oil)  
8. 5S-6750 [1] RING (Intermediate)  
9. 7S-8378 [1] RING (Top)  
  7S-9404 [1] RING GROUP  
    (Consists of Complete Set of Rings For One Piston)
 

#UEG0169S0048
 

9S-5783: FLYWHEEL GP

9S5783 FLYWHEEL GROUP
Serial No. 93N969-Up
c138728 UEG0169S
9S5783 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4693 C [1] FLYWHEEL ASSEM.  
2. 2S-7037 [1] GEAR (156 Teeth)  
3. 0V-0523 [9] BOLT  
  C   INDICATES CHANGE
 

#UEG0169S0049
 

3P-4615: METER GP-HOUR

3P4615 ELECTRIC HOUR METER GROUP
AN ATTACHMENT
c211679 UEG0169S
3P4615 METER GP-HOUR Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-1454 [1] WIRE ASSEM.  
    (Includes)
  5P-5629 CH WIRE 10.10 m(4 in.)  
2. 2L-8076 C [2] TERMINAL  
3. 1F-9369 C [1] TEE  
4. 2N-7744 C [1] SWITCH  
5. 5H-8840 [1] WIRE ASSEM.  
    (Includes)
  5P-5629 CH WIRE .17 m(7 in.)  
6. 2L-8076 [2] TERMINAL  
7. 5D-0122 [1] WIRE ASSEM.  
    (Includes)
  5P-5629 CH WIRE .26 m(10.23 in.)  
8. 2L-8076 C [2] TERMINAL  
9. 4N-3700 [1] METER GROUP  
  C   INDICATES CHANGE
  H   ORDER BY THE METRE
 

Information:

Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
3306 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3306 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
3306 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3306 VEHICULAR ENGINE
Crankshaft Hub And Damper
3306 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Connecting Rod Bearings
D7F ENGINE
Crankshaft Main Bearings
D7F ENGINE
Vibration Damper & Crankshaft Pulley
D7F ENGINE
Crankshaft Front Seal
D7F ENGINE
Crankshaft Rear Seal
D7F ENGINE
Crankshaft
D7F ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08

Caterpillar Parts SIS Catalog D7F :

CRANKSHAFT
9S-5781 CRANKSHAFT
CYLINDER BLOCK AS
2P-8776 CYLINDER BLOCK AS
CYLINDER BLOCK ASSEMBLY
5S-6778 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
GASKET KITS
CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT
FLYWHEEL GP
9S-5783 FLYWHEEL GP
PISTON & ROD GP
9S-8912 PISTON & ROD GP
FLYWHEEL GP
9S-5783 FLYWHEEL GP
CONNECTING ROD AND PISTON
9L-4085 CONNECTING ROD AND PISTON
FLYWHEEL GP
9S-5783 FLYWHEEL GP

Truck sale:

CATERPILLAR D7F 1992
 
CATERPILLAR D7F 1992
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR D7F 1974
 
CATERPILLAR D7F 1974
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR D7F 1972
 
CATERPILLAR D7F 1972
- TRACK TYPE TRACTORS
FOLEY EQUIPMENT CO. (KS/MO)
1550 S. West Street - Wichita - Kansas
CAT D7F
USD $27,500 
CAT D7F

Powertrax Equipment Sales
1971 CAT D7F
USD $54,900 
1971 CAT D7F

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.