AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5S9076 FUEL PUMP HOUSING GROUP--Type 2 Part of Fuel Pump Housing and Governor shown on Page 35 140 MOTOR GRADER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
FILTER GP-ENGINE OIL
COOLING SYSTEM
COOLER GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL

MOTOR GRADER 140 MOTOR GRADER 11R
 NO. 140 MTR. GRADER 11R00001-00690 (MACHINE) UEG0230S 140 11R   (1970)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING GROUP
5S-9076 FUEL PUMP HOUSING GROUP
FUEL PUMP HOUSING GROUP
5S-9076 FUEL PUMP HOUSING GROUP
 

#UEG0230S0060
 

5S-9076: FUEL PUMP HOUSING GROUP

5S9076 FUEL PUMP HOUSING GROUP--Type 2
Part of Fuel Pump Housing and Governor shown on Page 35
c112420 UEG0230S
5S9076 FUEL PUMP HOUSING GROUP Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-9735 [ 6] LIFTER ASSEM.  
2. 9H-5797 [ 6] PLUNGER AND BARREL ASSEM.  
3. 9H-5729 WASHER  
4. 1M-3506 [ 6] RING  
5. 4M-0411 [ 6] BONNET  
6. 1M-1077 [ 6] SEAL  
7. 8H-9204 [ 6] WASHER  
8. 2M-4314 [ 6] BUSHING  
9. 9B-1363 [ 6] SPRING  
10. 9H-5746 [ 6] CHECK  
11. 2M-4208 [ 6] SPACER (.174" Thick)  
  2M-4209 [ 6] SPACER (.178" Thick)  
  2M-4210 [ 6] SPACER (.182" Thick)  
  2M-4211 [ 6] SPACER (.186" Thick)  
  2M-4212 [ 6] SPACER (.190" Thick)  
12. 1S-0206 [ 6] SPRING  
13. 5S-9051 [ 1] HOUSING ASSEM.  
14. 4M-1474 [ 3] PIN  
15. 1P-0232 [ 6] BALL  
16. 1P-0234 [ 6] DOWEL  
17. 1P-0231 [ 6] BALL  
18. 1P-0233 [ 6] DOWEL  
19. 9H-1296 [ 1] BEARING  
20. 9H-1284 [ 1] BEARING  
21. 1M-1226 [ 1] BEARING  
22. 2S-7905 [ 1] PLUG  
23. 3D-4603 [ 1] PLUG  
24. 2A-3746 [ 1] PLUG  
25. 1S-1953 [ 1] BEARING  
26. 2M-8604 [ 1] BEARING  
27. 4F-6024 [ 2] DOWEL  
28. 1M-0101 [ 1] CAMSHAFT ASSEM.  
29. 1M-0690 [ 1] SLEEVE  
30. 8H-9208 [ 1] DOWEL  
31. 5S-5058 [ 1] GEAR ASSEM. (66 Teeth)  
32. 8H-9208 [ 1] DOWEL  
33. 1S-7436 [ 1] RACK  
34. 1S-0214 [ 1] SPRING  
35. 7M-5940 [ 1] PLATE  
36. 2H-3504 [ 1] LOCK  
37. 0L-0472 [ 1] BOLT  
 

#UEG0230S0061
 

5S-7248: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (5S7248 N/S)
Serial No. 11R1 to 11R669 inclusive and 24R1 to 24R500 inclusive
c112421 UEG0230S
5S7248 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] LINE ASSEM. (No. 6)  
2. [1] LINE ASSEM. (No. 5)  
3. [1] LINE ASSEM. (No. 4)  
4. [1] CLAMP  
5. [2] DAMPER  
6. [8] BOLT  
  [8] LOCKWASHER  
7. [1] LINE ASSEM. (No. 3)  
8. [1] LINE ASSEM. (No. 2)  
9. [1] LINE ASSEM. (No. 1)  
10. [1] CLAMP  
11. [1] FITTING  
12. [1] TUBE (Drain)  
13. [1] CLIP  
14. [1] BOLT  
15. [6] LOCKWASHER  
16. [1] SEAL  
17. [2] BOLT  
18. [1] SEAL  
19. [1] BOLT (1.375" Long)  
  [1] BOLT (1.75" Long)  
20. [1] SEAL  
21. [1] BOLT  
22. [1] BRACKET  
23. [1] PLUG  
24. [1] SEAL  
25. [1] CLAMP  
26. [2] DAMPER  
27. [1] CLAMP  
28. [6] VALVE SERVICE GROUP  
29. [1] SEAL  
30. [1] SEAL  
31. [6] BODY  
32. [6] NUT  
 

#UEG0230S0062
 

5S-7248: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (5S7248 N/S)
Serial No. 11R670-Up and 24R501-Up
c115516 UEG0230S
5S7248 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7176 [ 1] LINE ASSEM. (No. 6)  
2. 5S-7175 [ 1] LINE ASSEM. (No. 5)  
3. 9S-1230 [ 1] LINE ASSEM. (No. 4)  
4. 8S-4003 [ 1] CLAMP  
5. 8S-4005 [ 2] DAMPER  
6. 1B-2790 [ 8] BOLT  
  3B-4505 [ 8] LOCKWASHER  
7. 5S-7173 [ 1] LINE ASSEM. (No. 3)  
8. 5S-7172 [ 1] LINE ASSEM. (No. 2)  
9. 5S-7171 [ 1] LINE ASSEM. (No. 1)  
10. 8S-4004 [ 1] CLAMP  
11. 1P-9328 [ 1] FITTING  
12. 5S-7223 [ 1] TUBE (Drain)  
13. 9S-1350 [ 1] CLIP  
14. 0S-0509 [ 1] BOLT  
15. 3B-4506 [ 6] LOCKWASHER  
16. 8M-5248 [ 1] SEAL  
17. 1A-2029 [ 1] BOLT  
18. 8M-5260 [ 1] SEAL  
19. 0S-1591 [ 3] BOLT  
20. 8M-4987 [ 1] SEAL  
21. 0T-0055 [ 1] BOLT  
22. 2P-8704 [ 1] BRACKET  
23. 5M-6214 [ 1] PLUG  
24. 8M-4445 [ 1] SEAL  
25. 8S-3998 [ 1] CLAMP  
26. 8S-4000 [ 2] DAMPER  
27. 8S-3999 [ 1] CLAMP  
28. 7S-9891 [ 6] VALVE SERVICE GROUP  
29. 5B-3718 [ 1] SEAL  
30. 6F-1069 [ 1] SEAL  
31. 8S-2389 [ 6] BODY  
32. 5H-7225 [ 6] NUT  
 

#UEG0230S0063
 

7S-9840: OIL PUMP ASSEMBLY

7S9840 OIL PUMP ASSEMBLY
Part of Oil Pump
c127788 UEG0230S
7S9840 OIL PUMP ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0055 [4] BOLT  
2. 7H-1861 [1] LOCK  
3. 0L-0364 [8] LOCK  
4. 5S-3875 [1] BODY ASSEM. (Scavenge Pump)  
5. 3D-9398 [1] BEARING  
    (Part of 5S3875 Body Assem.)
6. 8M-5599 [1] KEY  
7. 7S-9725 [1] GEAR (8 Teeth Drive)  
8. 5S-3347 [1] SPACER  
9. 9S-3114 [1] SHAFT ASSEM.  
  [1] GEAR (8 Teeth Drive)  
    (Part of 9S3114 Shaft Assem.)
10. 5S-8518 [1] BODY ASSEM. (Oil Pump)  
  1F-1006 [1] DOWEL  
  4B-9880 [1] BALL  
11. 7S-6309 [1] SHAFT ASSEM.  
  6F-7172 [1] DOWEL  
    (Part of 7S6309 Shaft Assem.)
12. 8S-6513 [1] BEARING  
13. 1S-0702 [1] SHAFT  
14. 1M-2432 [1] SHAFT  
15. 0L-2061 [1] DOWEL  
    (Parts of 5S8518 Body Assem.)
16. 9S-1179 [1] GEAR ASSEM. (60 Teeth Idler)  
17. 9S-1160 [1] BEARING  
    (Part of 9S1179 Gear Assem.)
18. 0T-0887 [1] NUT  
  3B-4615 [1] COTTER PIN  
  1K-4703 [1] WASHER  
19. 7S-9442 [1] GEAR ASSEM. (8 Teeth Idler)  
20. 1H-1777 [2] BEARING  
    (Part of 7S9442 Gear Assem.)
21. 1S-6020 [1] GEAR (40 Teeth Drive)  
22. 0S-1617 [2] BOLT  
  5H-5652 [2] LOCK  
23. 4B-0479 [1] PLUNGER  
  4J-4790 [1] SPRING  
24. 4M-6946 [1] FLANGE  
25. 7S-9726 [1] GEAR ASSEM. (8 Teeth Idler)  
26. 8S-6508 [1] BEARING  
    (Part of 7S9726 Gear Assem.)
27. 0S-0509 [1] BOLT  
28. 0T-0225 [2] GASKET  
29. 1A-2029 [4] BOLT  
30. 7S-9728 [1] GEAR ASSEM. (8 Teeth Idler)  
31. 1H-1777 [2] BEARING (Part of 7S9728 Assem.)  
32. 2S-9529 [1] PLUNGER  
33. 1S-3921 [1] SPRING  
34. 7S-9478 [1] COVER  
35. 2H-3755 [2] BOLT  
  1M-7390 [2] LOCK  
36. 5S-3383 [1] TUBE ASSEM. (16.95" long)  
37. 1B-8709 [1] KEY  
 

#UEG0230S0064
 

8S-8918: OIL PUMP

OIL PUMP (8S8918 N/S)
c123365 UEG0230S
8S8918 OIL PUMP Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-9840 Y [1] OIL PUMP ASSEM.  
    (See Separate Illustration)
2. 7H-1861 [2] LOCK  
3. 1A-2029 [4] BOLT  
4. 8S-8874 [1] LOCK  
5. 0S-1590 [2] BOLT  
  0T-0329 [1] LOCK  
6. 8M-0904 [1] GASKET  
7. 8S-9300 [1] BELL ASSEM.  
  Y   SEPARATE ILLUSTRATION
 

#UEG0230S0065
 

7S-6638: OIL FILTER ASSEMBLY

7S6638 OIL FILTER ASSEMBLY
Serial No. 11R1 to 11R651 inclusive and 24R1 to 24R491 inclusive
Part of Oil Filter, Cooler and Lines shown on Pages 44 and 44A
c112427 UEG0230S
7S6638 OIL FILTER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-6636 [1] SCREW  
  1K-0505 [1] WASHER  
  5H-9899 [1] RING  
  3H-4970 [1] SEAL  
2. 0S-1618 [4] BOLT  
3. 3B-4505 [4] LOCKWASHER  
4. 9M-0853 [2] PLUNGER  
5. 6F-8007 [2] SPRING  
6. 7S-6744 [2] GASKET  
7. 6B-0830 [2] COVER  
8. 7S-6745 [1] RETAINER  
9. 7S-6746 [1] SPRING  
10. 2H-8829 [1] PLUG  
  6F-7062 [1] WASHER  
11. 2J-6356 [1] RING  
12. 5S-0484 [1] ELEMENT ASSEM. (Disposable)  
13. 5S-7128 [1] CASE ASSEM.  
  2M-8691 [1] GASKET  
14. 7S-6397 [1] BASE ASSEM.  
15. 1B-5174 [3] PLUG  
16. 3L-1850 [1] PLUG  
 

#UEG0230S0066
 

5S-7252: OIL FILTER, COOLER AND LINES

OIL FILTER, COOLER AND LINES (5S7252 N/S)
Serial No. 11R1 to 11R571 inclusive and 24R1 to 24R442 inclusive
7S6638 Filter parts are shown on Page 43
c104326 UEG0230S
5S7252 OIL FILTER, COOLER AND LINES Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-6395 [1] CORE ASSEM.  
2. 1A-2029 [8] BOLT (1.125" Long)  
3. 3B-4506 [13] LOCKWASHER  
4. 8M-4988 [2] SEAL  
5. 2B-2694 [3] BOLT  
6. 3B-4505 [4] LOCKWASHER  
  4B-4277 [4] WASHER  
7. 9H-6067 [2] SEAL  
8. 0S-1588 [3] BOLT (1.25" Long)  
9. 7F-7590 [1] GASKET  
10. 7S-6654 [1] TUBE ASSEM.  
11. 7S-6638 Y [1] FILTER ASSEM.  
    (See Separate Illustration)
12. 8S-7657 [1] TUBE ASSEM.  
13. 0S-1590 [1] BOLT  
14. 2M-5407 [1] GASKET  
15. 4B-4278 [1] WASHER  
16. 0S-1591 [1] BOLT (1.50" Long)  
17. 1D-4540 [1] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#UEG0230S0067
 

5S-7252: OIL FILTER, COOLER AND LINES

OIL FILTER, COOLER AND LINES (5S7252 N/S)
Serial No. 11R572 to 11R651 inclusive and 24R443 to 24R491 inclusive
7S6638 Filter parts are shown on Page 43
c112426 UEG0230S
5S7252 OIL FILTER, COOLER AND LINES Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2029 [9] BOLT (1.125" Long)  
2. 3B-4506 [13] LOCKWASHER  
3. 7S-6395 [1] CORE ASSEM.  
4. 2B-2694 [3] BOLT  
5. 3B-4505 [4] LOCKWASHER  
6. 4B-4277 [4] WASHER  
7. 8M-4988 [2] SEAL  
8. 7S-6638 Y [1] FILTER GROUP  
    (See Separate Illustration)
9. 7S-6654 [1] TUBE ASSEM.  
10. 7F-7590 [1] GASKET  
11. 0S-1590 [1] BOLT  
12. 2M-5407 [1] GASKET  
13. 1P-9307 [1] TUBE ASSEM.  
14. 0S-1588 [2] BOLT (1.25" Long)  
15. 7S-3912 [1] CLIP  
16. 7S-3913 [1] CLIP  
17. 4B-4278 [1] WASHER  
18. 9H-6067 [2] SEAL  
19. 1D-4540 [1] BOLT  
20. 0S-1591 [1] BOLT (1.50" Long)  
  Y   SEPARATE ILLUSTRATION
 

#UEG0230S0068
 

2P-0915: OIL FILTER AND LINES GROUP

2P915 OIL FILTER AND LINES GROUP
Serial No. 11R652-Up and 24R492-Up
c143769 UEG0230S
2P0915 OIL FILTER AND LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-6395 [1] CORE ASSEM.  
2. 1A-2029 [9] BOLT (1.125" long)  
3. 3B-4506 [13] LOCKWASHER  
4. 8M-4432 [2] SEAL  
5. 1A-9579 C [3] BOLT  
6. 3B-4505 [4] LOCKWASHER  
  4B-4277 [4] WASHER  
7. 9H-6067 [2] SEAL  
8. 0S-1588 [2] BOLT (1.25" long)  
9. 7F-7590 [1] GASKET  
10. 7S-6654 [1] TUBE ASSEM.  
11. 2P-0916 Y [1] FILTER ASSEM.  
    (See Separate Illustration)
12. 4N-4137 C [1] TUBE ASSEM.  
13. 0S-1590 [1] BOLT  
14. 2M-5407 [1] GASKET  
15. 4B-4278 [1] WASHER  
16. 0S-1591 [1] BOLT (1.50" long)  
17. 1D-4540 [1] BOLT  
18. 7S-3912 [1] CLIP  
19. 7S-3913 [1] CLIP  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0230S0069
 

2P-0916: OIL FILTER GROUP

2P916 OIL FILTER GROUP
Serial No. 11R652-Up and 24R492-Up
Part of 2P915 Oil Filter and Lines Group shown on Page 44B
c201655 UEG0230S
2P0916 OIL FILTER GROUP Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6448 [1] BASE ASSEM.  
  3L-1850 [1] PLUG (.50" Thread)  
2. 1B-5174 [3] PLUG (.75" Thread)  
3. 4N-8207 C [2] GASKET  
4. 8M-3182 [2] SPRING  
  1P-1367 [2] PLUNGER  
5. 6B-0830 [2] COVER  
6. 0S-1618 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
7. 2P-2537 [1] STUD  
8. 2P-4004 [1] FILTER ASSEM.  
  C   INDICATES CHANGE
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel System Timing
3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Fuel Bypass Valve<BR> (Scroll Fuel System-PC)
3306 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Fuel Check Valve And Bypass Valve
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Fuel Injection Pumps
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Fuel Transfer Pump
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Fuel Injection Pump Housing
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Method To Prevent High Fuel Pressure In The Injection Pump Housing{1262}
1979/06/18
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 140 :

FUEL PUMP HOUSING GROUP
5S-9076 FUEL PUMP HOUSING GROUP
FUEL LINES
FUEL LINES
FUEL TRANSFER PUMP GROUP
7S-4430 FUEL TRANSFER PUMP GROUP
FUEL FILTER GROUP
5S-9666 FUEL FILTER GROUP
FUEL PRIMING PUMP GROUP
7S-1251 FUEL PRIMING PUMP GROUP
PUMP ASSEMBLY
9H-2256 PUMP ASSEMBLY
FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR
GOVERNOR TORQUE SPRING
8S-5050 GOVERNOR TORQUE SPRING
FUEL INJECTION VALVES AND LINES
5S-7248 FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
5S-7248 FUEL INJECTION VALVES AND LINES
OIL PUMP ASSEMBLY
7S-9840 OIL PUMP ASSEMBLY
OIL PUMP
8S-8918 OIL PUMP
OIL FILTER ASSEMBLY
7S-6638 OIL FILTER ASSEMBLY
OIL FILTER, COOLER AND LINES
5S-7252 OIL FILTER, COOLER AND LINES
OIL FILTER, COOLER AND LINES
5S-7252 OIL FILTER, COOLER AND LINES
OIL FILTER AND LINES GROUP
2P-0915 OIL FILTER AND LINES GROUP

Truck sale:

Caterpillar 140 AWD, motor graders, Construction
425,000 
Caterpillar 140 AWD, motor graders, Construction
- motor graders
HOLT OF CALIFORNIA
Caterpillar 140-13 AWD, motor graders, Construction
500,000 
Caterpillar 140-13 AWD, motor graders, Construction
- motor graders
EMPIRE MACHINERY
Caterpillar H140 S, hammer, Construction
26,318 
Caterpillar H140 S, hammer, Construction
- hammer
HASTINGS DEERING (AUSTRALIA)
Caterpillar 140-15, motor graders, Construction
235,000 
Caterpillar 140-15, motor graders, Construction
- motor graders
NMC
Caterpillar 140-13AWL, motor graders, Construction
377,700 
Caterpillar 140-13AWL, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.