AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CIRCLE (2D7900 N/S) Serial No. 11R612 to 11R677 inclusive and 24R484 to 24R515 inclusive Circle Reversing Mechanism parts are shown on Page 97 140


IMPLEMENTS
CIRCLE GP
HYDRAULIC SYSTEM
DRIVE GP
CENTERSHIFT GP
CONTROL GP-POWER
SHAFT GP

MOTOR GRADER 140 MOTOR GRADER 11R
 NO. 140 MTR. GRADER 11R00001-00690 (MACHINE) UEG0230S 140 11R   (1970)

IMPLEMENTS

CIRCLE GP
CIRCLE GP
2D-7900 CIRCLE GP
CIRCLE GP
2D-7900 CIRCLE GP
CIRCLE GP
2D-7900 CIRCLE GP
 

#UEG0230S0200
 

2D-7900: CIRCLE GP

CIRCLE (2D7900 N/S)
Serial No. 11R612 to 11R677 inclusive and 24R484 to 24R515 inclusive
Circle Reversing Mechanism parts are shown on Page 97
c137968 UEG0230S
2D7900 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-6197 [1] DRAWBAR AND YOKE ASSEM.  
  2D-0283 [2] BALL STUD  
    (PART OF ASSEM. 2D7896)
  2D-7896 [1] BAR ASSEM.  
    (PART OF ASSEM. 5D6197)
  4H-7805 [2] BALL STUD  
    (PART OF ASSEM. 2D7896)
  8F-6124 [4] BOLT  
  3D-4524 [4] NUT  
  9M-2828 [4] WASHER  
  5D-9745 [2] SHOE  
  3B-5623 [12] SHIM  
  4B-3604 [4] SET SCREW  
  1D-5119 [4] NUT  
  2D-7866 [1] BEAM (LEFT HAND)  
    (PART OF ASSEM. 2D7902)
  1D-4642 [1] BOLT  
  8D-3093 C [2] SPACER  
    (PART OF 2D7902 ASSEM.)
  6B-3164 [2] SPACER  
    (PART OF ASSEM. 5D6197)
  2D-7902 [1] CIRCLE AND BEAM ASSEM.  
  8D-0461 C [1] BRACE ASSEM.  
    (Part of 2D7902 Assem.)
  2D-7865 [1] BEAM (RIGHT HAND)  
    (PART OF ASSEM. 2D7902)
    (SEE SEPARATE ILLUSTRATION)
    (SEE SEPARATE ILLUSTRATION)
  4D-1379 [2] BLOCK  
    (PART OF 2D7902 ASSEM.)
  1D-0503 [2] WASHER  
  6F-6999 [2] PIN  
  3B-4617 [2] COTTER PIN  
  2B-7410 [1] PLUG  
  3D-9502 [1] BOLT (16.06" LONG)  
  7F-9263 [1] CAP  
  3B-8490 [1] FITTING  
  2D-4139 [1] CONNECTION  
    (PART OF ASSEM. 5D6197)
  6B-5310 [1] BOLT  
  1B-4207 [1] NUT  
  3B-4512 [1] LOCKWASHER  
  8B-8282 [1] LOCK  
  5D-6454 [1] SPACER (RIGHT HAND)  
  6B-3160 [1] SPACER (LEFT HAND)  
    (PARTS OF ASSEM. 5D6197)
  0L-1328 [2] BOLT (4" LONG)  
  3D-8659 [2] NUT  
  1D-4612 [4] BOLT (4" LONG)  
  1B-8589 [4] LOCKWASHER  
  5D-6201 [1] SHOE (RIGHT HAND)  
  5D-6459 [6] SHIM (RIGHT HAND)  
  6B-3158 [1] SHOE (LEFT HAND)  
  4B-5810 [6] SHIM (LEFT HAND)  
  5D-0399 [1] PLUNGER ASSEM.  
  5D-0398 [1] PIN  
  7B-2499 [1] RING  
  1D-4642 [1] BOLT  
  5D-6629 [2] NUT  
  5D-5205 [2] WASHER (NOTCHED)  
  5D-5206 [2] WASHER (PLAIN)  
  5D-0395 [1] BRACKET (RIGHT HAND)  
  5D-0396 [1] BRACKET (LEFT HAND)  
  2B-2673 [2] NUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0230S0201
 

2D-7900: CIRCLE GP

CIRCLE (2D7900 N/S)
Serial No. 11R678-Up and 24R516-Up
Circle Reversing Mechanism parts are shown on Page 97
c141938 UEG0230S
2D7900 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-6197 [1] DRAWBAR AND YOKE ASSEM.  
  2D-0283 [2] BALL STUD  
    (PART OF ASSEM. 2D7896)
  2D-7896 [1] BAR ASSEM.  
    (PART OF ASSEM. 5D6197)
  4H-7805 [2] BALL STUD  
    (PART OF ASSEM. 2D7896)
  8F-6124 [4] BOLT  
  2K-7471 C [4] NUT  
  9M-2828 [4] WASHER  
  5D-9745 [2] SHOE  
  3B-5623 [12] SHIM  
  4B-3604 [4] SET SCREW  
  1D-5119 [4] NUT  
  8D-9914 C [1] BEAM (LEFT HAND)  
    (PART OF ASSEM. 2D7902)
  1D-4642 [1] BOLT  
  8D-3093 [2] SPACER  
    (PART OF 2D7902 ASSEM.)
  6B-3164 [2] SPACER  
    (PART OF ASSEM. 5D6197)
  2D-7902 [1] CIRCLE AND BEAM ASSEM.  
  8D-0461 [1] BRACE ASSEM.  
    (Part of 2D7902 Assem.)
  8D-9913 C [1] BEAM (RIGHT HAND)  
    (PART OF ASSEM. 2D7902)
    (SEE SEPARATE ILLUSTRATION)
    (SEE SEPARATE ILLUSTRATION)
  4D-1379 [2] BLOCK  
    (PART OF 2D7902 ASSEM.)
  1D-0503 [2] WASHER  
  6F-6999 [2] PIN  
  3B-4617 [2] COTTER PIN  
  2B-7410 [1] PLUG  
  3D-9502 [1] BOLT (16.06" LONG)  
  7F-9263 [1] CAP  
  3B-8490 [1] FITTING  
  2D-4139 [1] CONNECTION  
    (PART OF ASSEM.5D6197)
  6B-5310 [1] BOLT  
  1B-4207 [1] NUT  
  3B-4512 [1] LOCKWASHER  
  8B-8282 [1] LOCK  
  5D-6454 [1] SPACER (RIGHT HAND)  
  6B-3160 [1] SPACER (LEFT HAND)  
    (PARTS OF ASSEM. 5D6197)
  0L-1328 [2] BOLT (4" LONG)  
  2K-0337 C [2] NUT  
  1D-4612 [4] BOLT (4" LONG)  
  1B-8589 [4] LOCKWASHER  
  5D-6201 [1] SHOE (RIGHT HAND)  
  5D-6459 [6] SHIM (RIGHT HAND)  
  6B-3158 [1] SHOE (LEFT HAND)  
  4B-5810 [6] SHIM (LEFT HAND)  
  5D-0399 [1] PLUNGER ASSEM.  
  5D-0398 [1] PIN  
  7B-2499 [1] RING  
  1D-4642 [1] BOLT  
  6K-3632 C [2] NUT  
  5D-5205 [2] WASHER (NOTCHED)  
  5D-5206 [2] WASHER (PLAIN)  
  5D-0395 [1] BRACKET (RIGHT HAND)  
  5D-0396 [1] BRACKET (LEFT HAND)  
  2B-2673 [2] NUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0230S0202
 

CIRCLE REVERSING MECHANISM

CIRCLE REVERSING MECHANISM
Serial No. 11R1 to 11R519 inclusive and 24R1 to 24R428 inclusive
Part of Circle shown on Page 96
c109009 UEG0230S
None CIRCLE REVERSING MECHANISM Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  1B-8714 [1] KEY  
  2D-1683 [1] FITTING  
  5F-5434 [1] VENT ASSEM.  
  6F-7002 [3] PIN  
  5D-3283 [2] COUPLING  
  1A-4590 [3] RING  
  1D-5342 [2] DOWEL  
    (PART OF ASSEM. 2D7935)
  2D-5790 [1] CAP  
  2H-4145 [1] SEAL  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  1B-5174 [1] PLUG  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2D-7939 [1] SHAFT ASSEM.  
  2D-7941 [1] GEAR (21 TEETH)  
  1B-8714 [1] KEY  
  4B-5806 [1] SHAFT  
  3H-8510 [2] BEARING  
  3B-0645 [2] PLUG  
    (PARTS OF ASSEM. 2D7934)
  4D-1608 [2] SEAL  
  3H-8509 [2] BEARING  
    (PART OF ASSEM. 2D7935)
  7D-7237 [1] SHAFT ASSEM.  
  2D-7941 [1] GEAR (21 TEETH)  
  1B-8714 [1] KEY  
  5D-3282 [1] SHAFT  
  2D-7935 [1] HOUSING ASSEM.  
  0S-1593 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  2D-7934 [1] COVER ASSEM.  
  2D-7938 [1] GASKET  
  6B-6162 [1] NUT  
  3B-4622 [1] COTTER PIN  
  9H-1031 [1] WASHER  
  2D-7937 [2] BEARING  
    (PART OF ASSEM. 6D7994)
  2D-9870 [1] SEAL  
  3D-4443 [1] SHAFT  
  5D-3281 [1] SHAFT  
  6D-2362 [1] WORM  
  6D-2361 [1] WASHER  
  3B-6552 [1] ELBOW  
  5F-5434 [1] VENT ASSEM.  
  2D-5795 [1] SLEEVE  
  2B-7410 [1] PLUG  
  2D-5792 [2] WASHER  
  2D-5788 [1] COVER  
  2D-5789 [1] GASKET  
  5D-4364 [1] GEAR (36 TEETH)  
  1A-2029 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  8S-9092 [6] BOLT  
  4D-1191 [6] NUT  
  4B-4281 [6] WASHER  
  6D-7994 [1] HOUSING ASSEM.  
  0L-1026 [1] PLUG (CORE)  
  2B-8162 [1] DOWEL  
    (PARTS OF ASSEM. 6D7994)
  6D-7722 [1] SHAFT  
  3K-6454 [1] SEAL  
  3D-2088 [2] STUD (5.00" LONG)  
  3D-8669 [5] STUD (2.80" LONG)  
    (PARTS OF ASSEM. 6D7994)
  2D-5799 [1] PINION  
  6B-6682 [7] NUT  
  4D-3703 [7] WASHER  
  2D-5798 [1] GASKET  
  1A-1415 [1] NUT  
  2D-5797 [1] LOCKWASHER  
 

#UEG0230S0203
 

CIRCLE REVERSING MECHANISM

CIRCLE REVERSING MECHANISM
Serial No. 11R520 to 11R609 inclusive and 24R429 to 24R466 inclusive
Part of Circle shown on Page 96
c131655 UEG0230S
None CIRCLE REVERSING MECHANISM Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  1B-8714 [1] KEY  
  2D-1683 [1] FITTING  
  5F-5434 [1] VENT ASSEM.  
  6F-7002 [3] PIN  
  [2] COUPLING  
  1A-4590 [3] RING  
  1D-5342 [2] DOWEL  
    (PART OF ASSEM. 2D7935)
  2D-5790 [1] CAP  
  2H-4145 [1] SEAL  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  1B-5174 [1] PLUG  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2D-7939 [1] SHAFT ASSEM.  
  2D-7941 [1] GEAR (21 TEETH)  
  1B-8714 [1] KEY  
  4B-5806 [1] SHAFT  
  3H-8510 [2] BEARING  
  3B-0645 [2] PLUG  
    (PARTS OF ASSEM. 2D7934)
  4D-1608 [2] SEAL  
  3H-8509 [2] BEARING  
    (PART OF ASSEM. 2D7935)
  7D-7237 [1] SHAFT ASSEM.  
  2D-7941 [1] GEAR (21 TEETH)  
  1B-8714 [1] KEY  
  5D-3282 [1] SHAFT  
  2D-7935 [1] HOUSING ASSEM.  
  0S-1593 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  2D-7934 [1] COVER ASSEM.  
  2D-7938 [1] GASKET  
  6B-6162 [1] NUT  
  3B-4622 [1] COTTER PIN  
  9H-1031 [1] WASHER  
  2D-7937 [2] BEARING  
    (PART OF ASSEM. 6D7994)
  2D-9870 [1] SEAL  
  3D-4443 [1] SHAFT  
  5D-3281 [1] SHAFT  
  6D-2362 [1] WORM  
  6D-2361 [1] WASHER  
  3B-6552 [1] ELBOW  
  5F-5434 [1] VENT ASSEM.  
  2D-5795 [1] SLEEVE  
  2B-7410 [1] PLUG  
  2D-5792 [2] WASHER  
  2D-5788 [1] COVER  
  2D-5789 [1] GASKET  
  5D-4364 [1] GEAR (36 TEETH)  
  1A-2029 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  8S-9092 [6] BOLT  
  4D-1191 [6] NUT  
  4B-4281 [6] WASHER  
  6D-7994 [1] HOUSING ASSEM.  
  0L-1026 [1] PLUG (CORE)  
  2B-8162 [1] DOWEL  
    (PARTS OF ASSEM. 6D7994)
  7D-6472 [1] SHAFT  
  3K-6454 [1] SEAL  
  3D-2088 [2] STUD (5.00" LONG)  
  3D-8669 [5] STUD (2.80" LONG)  
    (PARTS OF ASSEM. 6D7994)
  7D-6516 [1] PINION  
  6B-6682 [7] NUT  
  4D-3703 [7] WASHER  
  2D-5798 [1] GASKET  
  1A-1415 [1] NUT  
  2D-5797 [1] LOCKWASHER  
 

#UEG0230S0204
 

CIRCLE REVERSING MECHANISM

CIRCLE REVERSING MECHANISM
Serial No. 11R610 to 11R677 inclusive and 24R467 to 24R515 inclusive
Part of Circle shown on Page 96 and 96A
c135998 UEG0230S
None CIRCLE REVERSING MECHANISM Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  1B-8714 [1] KEY  
  2D-1683 [1] FITTING  
  5F-5434 [1] VENT ASSEM.  
  6F-7002 [3] PIN  
  7D-7055 [2] COUPLING  
  1A-4590 [3] RING  
  1D-5342 [2] DOWEL  
    (PART OF ASSEM. 2D7935)
  2D-5790 [1] CAP  
  2H-4145 [1] SEAL  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  1B-5174 [1] PLUG  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2D-7939 [1] SHAFT ASSEM.  
  2D-7941 [1] GEAR (21 TEETH)  
  1B-8714 [1] KEY  
  4B-5806 [1] SHAFT  
  3H-8510 [2] BEARING  
  3B-0645 [2] PLUG  
    (PARTS OF ASSEM. 2D7934)
  4D-1608 [2] SEAL  
  3H-8509 [2] BEARING  
    (PART OF ASSEM. 2D7935)
  7D-9540 [1] SHAFT ASSEM.  
  2D-7941 [1] GEAR (21 TEETH)  
  [1] KEY  
    (PARTS OF 7D9540 ASSEM.)
  2D-7935 [1] HOUSING ASSEM.  
  0S-1593 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  2D-7934 [1] COVER ASSEM.  
  2D-7938 [1] GASKET  
  5D-1986 [1] NUT  
  9H-1031 [1] WASHER  
  2D-7937 [2] BEARING  
    (PART OF ASSEM. 6D7994)
  2D-9870 [1] SEAL  
  7D-9616 [1] SHAFT  
  7D-7054 [1] SHAFT  
  7D-6588 [1] WORM  
  6D-2361 [1] WASHER  
  3B-6552 [1] ELBOW  
  5F-5434 [1] VENT ASSEM.  
  7D-9617 [1] SLEEVE  
  2B-7410 [1] PLUG  
  2D-5792 [2] WASHER  
  2D-5788 [1] COVER  
  2D-5789 [1] GASKET  
  5D-4364 [1] GEAR (36 TEETH)  
  1A-2029 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  8S-9092 [6] BOLT  
  4D-1191 [6] NUT  
  4B-4281 [6] WASHER  
  6D-7994 [1] HOUSING ASSEM.  
  0L-1026 [1] PLUG (CORE)  
  2B-8162 [1] DOWEL  
    (PARTS OF ASSEM. 6D7994)
  7D-6472 [1] SHAFT  
  3K-6454 [1] SEAL  
  3D-2088 [2] STUD (5.00" LONG)  
  3D-8669 [5] STUD (2.80" LONG)  
    (PARTS OF ASSEM. 6d7994)
  7D-6516 [1] PINION  
  6B-6682 [7] NUT  
  4D-3703 [7] WASHER  
  2D-5798 [1] GASKET  
  1A-1415 [1] NUT  
  2D-5797 [1] LOCKWASHER  
 

#UEG0230S0205
 

CIRCLE REVERSING MECHANISM

CIRCLE REVERSING MECHANISM
Serial No. 11R678-Up and 24R516-Up
Part of Circle shown on Page 96B
c141939 UEG0230S
None CIRCLE REVERSING MECHANISM Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  1B-8714 [1] KEY  
  2D-1683 [1] FITTING  
  5F-5434 [1] VENT ASSEM.  
  6F-7002 [3] PIN  
  7D-7055 [2] COUPLING  
  1A-4590 [3] RING  
  1D-5342 [2] DOWEL  
    (PART OF ASSEM. 2D7935)
  2D-5790 [1] CAP  
  2H-4145 [1] SEAL  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  1B-5174 [1] PLUG  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2D-7939 [1] SHAFT ASSEM.  
  2D-7941 [1] GEAR (21 TEETH)  
  1B-8714 [1] KEY  
  4B-5806 [1] SHAFT  
  3H-8510 [2] BEARING  
  3B-0645 [2] PLUG  
    (PARTS OF ASSEM. 2D7934)
  4D-1608 [2] SEAL  
  3H-8509 [2] BEARING  
    (PART OF ASSEM. 2D7935)
  7D-9540 [1] SHAFT ASSEM.  
  2D-7941 [1] GEAR (21 TEETH)  
  1B-8714 [1] KEY  
    (PARTS OF 7D9540 ASSEM.)
  2D-7935 [1] HOUSING ASSEM.  
  0S-1593 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  2D-7934 [1] COVER ASSEM.  
  2D-7938 [1] GASKET  
  5D-1986 [1] NUT  
  9H-1031 [1] WASHER  
  2D-7937 [2] BEARING  
    (PART OF ASSEM. 6D7994)
  2D-9870 [1] SEAL  
  7D-9616 [1] SHAFT  
  7D-7054 [1] SHAFT  
  7D-6588 [1] WORM  
  6D-2361 [1] WASHER  
  3B-6552 [1] ELBOW  
  5F-5434 [1] VENT ASSEM.  
  7D-9617 [1] SLEEVE  
  2B-7410 [1] PLUG  
  2D-5792 [2] WASHER  
  2D-5788 [1] COVER  
  2D-5789 [1] GASKET  
  8D-5344 C [1] GEAR (36 TEETH)  
  1A-2029 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  8S-9092 C [9] BOLT  
  3K-2889 C [9] NUT  
  4B-4281 C [9] WASHER  
  6D-7994 [1] HOUSING ASSEM.  
  0L-1026 [1] PLUG (CORE)  
  2B-8162 [1] DOWEL  
    (PARTS OF ASSEM. 6D7994)
  8D-5346 C [1] SHAFT  
  3K-6454 [1] SEAL  
  3D-2088 [2] STUD (5.00" LONG)  
  3D-8669 [5] STUD (2.80" LONG)  
    (PART OF ASSEM. 6D7994)
  7D-6516 [1] PINION  
  6B-6682 [7] NUT  
  4D-3703 [7] WASHER  
  2D-5798 [1] GASKET  
  1A-1415 [1] NUT  
  2D-5797 [1] LOCKWASHER  
  C   INDICATES CHANGE
 

#UEG0230S0206
 

CENTERSHIFT

CENTERSHIFT
Refer also to Page 142 for special parts
c108978 UEG0230S
None CENTERSHIFT Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-5066 [1] SLEEVE  
  1B-4439 [1] NUT  
  3B-4618 [1] COTTER PIN  
  3B-5067 [1] SHAFT  
  3B-2275 [1] KEY  
  1D-6488 [1] CAP  
  1D-6489 [1] GASKET  
  0S-1590 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  6F-2320 [2] BUSHING  
    (PART OF HOUSING ASSEM. 8F7971)
  1B-4518 [1] NUT  
  3B-4632 [1] COTTER PIN  
  3B-5058 [1] SLEEVE  
  2D-1659 [1] RACK  
  8F-6390 [1] SHIM (.0598" THICK)  
  8F-6391 [10] SHIM (.010" THICK)  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  2D-7838 [1] BALLSTUD  
  7D-2267 [1] LINK ASSEM.  
  7D-2137 [1] SOCKET  
    (PART OF 7D2267 ASSEM.)
  6B-3226 [1] CAP  
  3B-6082 [6] SHIM  
  3B-8489 [2] FITTING  
  0S-1625 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
  7B-2503 [1] PIN  
  7B-2499 [1] RING  
  2B-7410 [2] PLUG  
  7D-2199 [1] SLEEVE ASSEM.  
  7D-2136 [1] SOCKET  
    (PART OF 7D2199 ASSEM.)
  3B-9970 [1] WORM  
  1D-1158 [1] KEY  
  3B-7037 [2] WASHER  
  4D-1608 [1] SEAL  
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  1B-8714 [1] KEY  
  8F-7422 [1] GEAR (32 TEETH)  
  6H-2448 [2] PLATE  
  3D-2149 [1] PINION (9 TEETH)  
  3D-2148 [1] KEY  
  5F-5434 [1] VENT  
  3B-9971 [1] COVER  
  3B-5054 [1] GASKET  
  0S-2318 [4] BOLT  
  1B-4206 [4] NUT  
  3B-4510 [4] LOCKWASHER  
  0L-2119 [4] WASHER  
  3B-8489 [1] FITTING  
  8F-7971 [1] HOUSING ASSEM.  
  3B-5068 [1] PIN  
  3B-4627 [1] COTTER PIN  
  1F-2338 [1] BUSHING  
    (PART OF HOUSING ASSEM. 8F7971)
  8S-9092 [8] BOLT (2.25" LONG)  
  1D-4720 [8] NUT  
  3B-4510 [10] LOCKWASHER  
  5D-9514 [2] BOLT (6.25" LONG)  
  1D-4720 [2] NUT  
  5M-9738 [1] SEAL  
  7D-6091 [1] RAIL  
  6F-6992 [1] CAP  
  7F-1327 [6] SHIM  
  1A-8063 [2] BOLT  
  3B-4512 [2] LOCKWASHER  
 

#UEG0230S0207
 

2D-4125: SHAFT GP-LEANING WHEEL CONTROL

LEANING WHEEL CONTROL SHAFT (2D4125 N/S)
Serial No. 11R1 to 11R609 inclusive and 24R1 to 24R466 inclusive. 8D1505, 8D1502,
8D1566 and 8D1567 Joint parts are shown on Pages 99 and 99B
c137059 UEG0230S
2D4125 SHAFT GP-LEANING WHEEL CONTROL Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7D-1739 [1] SHAFT ASSEM.  
  7D-2059 [1] JOINT ASSEM.  
    (Part of 7D1739 Assem.)
  8D-1505 C [1] JOINT ASSEM.  
    -OR-
  8D-1566 YC [1] JOINT ASSEM.  
    (See Separate Illustration)
  7D-1741 [1] SHAFT ASSEM.  
  7D-2058 [1] JOINT ASSEM.  
    (Part of 7D1741 Assem.)
  8D-1502 C [1] JOINT ASSEM.  
    -OR-
  8D-1567 YC [1] JOINT ASSEM.  
    (See Separate Illustration)
  9S-1354 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  1B-8714 [2] KEY  
  2D-4109 [1] SHAFT  
  5B-1104 [1] BEARING  
  0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  3B-8489 [1] FITTING  
  3B-8489 [4] FITTING  
  6F-1750 [1] SLEEVE  
  6F-1752 [1] SHAFT  
  1F-2692 [1] BUSHING  
  6F-8921 [1] BUSHING  
  1F-2694 [1] BUSHING  
  1F-1310 [1] BUSHING  
    (PARTS OF CASE ASSEM. 6F2416)
  4D-1608 [1] SEAL  
  7B-5327 [2] SHIM  
  6F-1769 [1] COVER  
  6F-1770 [2] GASKET  
  7D-2059 [1] JOINT ASSEM.  
    (Part of 7D1846 Assem.)
  8D-1505 C [1] JOINT ASSEM.  
    -OR-
  8D-1566 YC [1] JOINT ASSEM.  
    (See Separate Illustration)
  7D-1844 [1] SHAFT ASSEM.  
  7D-2058 [1] JOINT ASSEM.  
    (Part of 7D1844 Assem.)
  8D-1502 C [1] JOINT ASSEM.  
    -OR-
  8D-1567 YC [1] JOINT ASSEM.  
    (See Separate Illustration)
  6F-1753 [1] GEAR (13 TEETH)  
  1D-2611 [1] SLEEVE  
  6F-7043 [1] NUT  
  6H-0209 [1] WASHER  
  3B-4618 [1] COTTER PIN  
  6F-1754 [1] GEAR (19 TEETH)  
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  6F-1751 [1] SHAFT  
  1B-8714 [1] KEY  
  1A-4590 [2] RING (SNAP)  
  5D-3283 [1] COUPLING  
  6F-7002 [2] PIN  
  0T-0513 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  6F-2416 [1] CASE ASSEM.  
  7D-1846 [1] SHAFT ASSEM.  
  Y   SEPARATE ILLUSTRATION
 

#UEG0230S0208
 

8D-0450: LEANING WHEEL CONTROL SHAFT GROUP

8D450 LEANING WHEEL CONTROL SHAFT GROUP
Serial No. 11R610-Up and 24R467-Up
8D1505, 8D1502, 8D1566 and 8D1567 Joint parts are shown on Pages 99 and 99B
c156323 UEG0230S
8D0450 LEANING WHEEL CONTROL SHAFT GROUP Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7D-1739 [1] SHAFT ASSEM.  
  7D-2059 [1] JOINT ASSEM.  
    (Part of 7D1739 Assem.)
    Includes:
  8D-1505 C [1] JOINT ASSEM.  
    -OR-
  8D-1566 YC [1] JOINT ASSEM.  
    (See Separate Illustration)
  7D-1741 [1] SHAFT ASSEM.  
  7D-2058 [1] JOINT ASSEM.  
    (Part of 7D1741 Assem.)
    Includes:
  8D-1502 C [1] JOINT ASSEM.  
    -OR-
  8D-1567 YC [1] JOINT ASSEM.  
    (See Separate Illustration)
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  1B-8714 [1] KEY  
  7D-9511 [1] SHAFT  
  5B-1104 [1] BEARING  
  0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  3B-8489 [1] FITTING  
  3B-8489 [4] FITTING  
  1D-2611 [1] SLEEVE  
  7D-9554 C [1] SHAFT  
  1F-2692 [1] BUSHING  
  6F-8921 [1] BUSHING  
  1F-2694 [1] BUSHING  
  1F-1310 [1] BUSHING  
    (PARTS OF CASE ASSEM. 6F2416)
  4D-1608 [1] SEAL  
  6F-1769 [1] COVER  
  6F-1770 [2] GASKET  
  7B-5327 [2] SHIM  
  1B-5082 C [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  6F-2416 [1] CASE ASSEM  
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  7D-1844 [1] SHAFT ASSEM.  
  7D-2058 [1] JOINT ASSEM.  
    (Part of 7D1844 Assem.)
    Includes:
  8D-1502 C [1] JOINT ASSEM.  
    -OR-
  8D-1567 YC [1] JOINT ASSEM.  
    (See Separate Illustration)
  7D-9682 [1] GEAR (13 TEETH)  
  7D-9705 C [1] SLEEVE  
  2K-0337 [1] NUT  
  6H-0209 [1] WASHER  
  6F-1754 [1] GEAR (19 TEETH)  
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  6F-1751 [1] SHAFT  
  1B-8714 [2] KEY  
  1A-4590 [2] RING (SNAP)  
  7D-7055 [1] COUPLING  
  6F-7002 [2] PIN  
  7D-2059 [1] JOINT ASSEM.  
    (Part of 7D1846 Assem.)
    Includes:
  8D-1505 C [1] JOINT ASSEM.  
    -OR-
  8D-1566 YC [1] JOINT ASSEM.  
    (See Separate Illustration)
  7D-1846 [1] SHAFT ASSEM  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0230S0209
 

8D-1505: UNIVERSAL JOINT GP

8D1505 JOINT ASSEMBLY
Part of Leaning Wheel Control Shaft, Control Shafts and Scarifier Controls
shown on Pages 98, 98A, 102, 144 and 144A. Only separate parts serviced
When complete Assembly is required order 7D2058
c136631 UEG0230S
8D1505 UNIVERSAL JOINT GP Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-1506 [1] YOKE (Marked USA M)  
2. 8D-1508 [1] SPIDER & BEARING ASSEM.  
    (Marked USA 1675)
3. 8D-2835 [4] RING  
4. [1] YOKE (Marked USA N-2)  
 

Information:

Special Instruction
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Disassembly and Assembly
Circle Assembly And Blade
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Circle Reverse Transfer Gear Housing
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Circle Reverse Gear Housing
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Circle Centershift Rack
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Circle Centershift Housing
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
One-Piece Shaft And Lower Brace Made From A Tube Are Now Used In The Circle And Beam Assembly{6154}
1980/04/14
Circle Assembly Replacement Segments Available {6152}
1985/09/16
Circle Repair Segments Available{6152,6154}
1990/04/16
Special Instruction, SEHS7268, "Installation of Circle Repair Segments" Is Now Available {6152, 6154}
2004/05/03
Circle Tooth Profile and the Correct Use of Templates for the Installation of Circle Segments For Certain Motor Graders {6152, 6152}
2012/03/20

Caterpillar Parts SIS Catalog 140 :

CIRCLE GP
2D-7900 CIRCLE GP
BEARING ASSEMBLY
2B-4186 BEARING ASSEMBLY
2D-7836 LIFT GP-BLADE
LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
CIRCLE GP
2D-7900 CIRCLE GP
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CENTERSHIFT
CENTERSHIFT
SHAFT GP-LEANING WHEEL CONTROL
2D-4125 SHAFT GP-LEANING WHEEL CONTROL
LEANING WHEEL CONTROL SHAFT GROUP
8D-0450 LEANING WHEEL CONTROL SHAFT GROUP

Truck sale:

Caterpillar 140 AWD, motor graders, Construction
425,000 
Caterpillar 140 AWD, motor graders, Construction
- motor graders
HOLT OF CALIFORNIA
Caterpillar 140-13 AWD, motor graders, Construction
500,000 
Caterpillar 140-13 AWD, motor graders, Construction
- motor graders
EMPIRE MACHINERY
Caterpillar H140 S, hammer, Construction
26,318 
Caterpillar H140 S, hammer, Construction
- hammer
HASTINGS DEERING (AUSTRALIA)
Caterpillar 140-15, motor graders, Construction
235,000 
Caterpillar 140-15, motor graders, Construction
- motor graders
NMC
Caterpillar 140-13AWL, motor graders, Construction
377,700 
Caterpillar 140-13AWL, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.