AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

120 MOTOR GRADER 10R00001-02881 (MACHINE) LUBRICATION SYSTEM Caterpillar SIS



MOTOR GRADER 120 MOTOR GRADER 10R
 120 MOTOR GRADER 10R00001-02881 (MACHINE) UEG0231S 120 10R   (1969)

Parts group 120:

  For full view, you need register
LUBRICATION SYSTEM
FILLER GP-ENGINE OIL
COVER GP-PROTECTION
8S-3747 COVER GP-PROTECTION
8S3747 PROTECTION COVER GROUP--Oil Filler Cap
Also part of 8D3010 and 9D470 Vandalism Protection
Arrangements listed on Page 117B
FILTER GP-ENGINE OIL
OIL FILTER ASSEMBLY
7S-6638 OIL FILTER ASSEMBLY
7S6638 OIL FILTER ASSEMBLY
Serial No. 10R1 to 10R2143 and 22R1 to 22R941 inclusive
Part of Oil Filter, Cooler & Lines shown on Pages 42 & 42A
OIL FILTER, COOLER AND LINES
5S-7252 OIL FILTER, COOLER AND LINES
OIL FILTER, COOLER AND LINES (5S7252 N/S)
Serial No. 10R1 to 10R1161 & 10R1169 inclusive and 22R1 to 22R864 inclusive
7S6638 Filter parts are shown on Page 41
OIL FILTER, COOLER AND LINES
5S-7252 OIL FILTER, COOLER AND LINES
OIL FILTER, COOLER AND LINES (5S7252 N/S)
Serial No. 10R1162 to 10R1168 and 10R1170 to 10R2143 inclusive &
22R865 to 22R941 inclusive. 7S6638 Filter parts are shown on Page 41
OIL FILTER AND LINES GROUP
2P-0915 OIL FILTER AND LINES GROUP
2P915 OIL FILTER AND LINES GROUP
Serial No. 10R2144-Up and 22R942-Up
2P916 Filter parts are shown on Page 41B
FUMES DISPOSAL GP
BREATHER AND FUMES DISPOSAL
5S-6437 BREATHER AND FUMES DISPOSAL
BREATHER AND FUMES DISPOSAL (5S6437 N/S)
PUMP GP-ENGINE OIL
OIL PUMP ASSEMBLY
7S-9840 OIL PUMP ASSEMBLY
7S9840 OIL PUMP ASSEMBLY
Part of Oil Pump
OIL PUMP
8S-8918 OIL PUMP
OIL PUMP (8S8918 N/S)

Information:

(For parts list, see above)

Specifications
Oil Breather Cap
3306 VEHICULAR ENGINE
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-NACD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Relief Valve<BR> (4H442) (3D2532)
NO. 120 & NO. 140 MOTOR GRADERS HYDRAULIC SYSTEM, STEERING A
Fuel Bypass Valve<BR> (Scroll Fuel System-PC)
3306 VEHICULAR ENGINE
Oil Filter<BR> (2P916, 2P6475 &amp; 2P6525)
3306 VEHICULAR ENGINE
Service Letter-China
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Disassembly and Assembly
Oil Filter Base
NO. 120 & NO. 140 ENGINE
Engine Oil Cooler
NO. 120 & NO. 140 ENGINE
Service Magazine
New Oil Filter Base Has Larger Oil Passages; Some Bases Need Modification{1306}
1980/08/11
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
New Oil Filter Base Assembly Used In Filter Base Group{1306}
1984/04/16
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Fuel Filter Base With Check Valve Prevents High Fuel Pressure After The Engine Is Stopped{1262}
1979/03/05
Sealant Now Used On Pipe Plugs At The Bottom Of The Oil Filter Base Assembly To Prevent Oil Leakage{1306}
1979/08/13
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Service Magazine
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Technical Information Bulletin
3300 Engine Oil Level Maintenance And High Oil Consumption
3300 Engine Oil Level Maintenance And High Oil Consumption
Specifications
Relief Valve<BR> (4H442) (3D2532)
NO. 120 & NO. 140 MOTOR GRADERS HYDRAULIC SYSTEM, STEERING A
Disassembly and Assembly
Oil Filter Base
NO. 120 & NO. 140 ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
New Oil Filter Base Assembly Used In Filter Base Group{1306}
1984/04/16
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Fuel Filter Base With Check Valve Prevents High Fuel Pressure After The Engine Is Stopped{1262}
1979/03/05
Sealant Now Used On Pipe Plugs At The Bottom Of The Oil Filter Base Assembly To Prevent Oil Leakage{1306}
1979/08/13
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Tool Operating Manual
464-8520 Quick Drain Engine Oil Pump {0645, 0707, 1325}
464-8520 Quick Drain Engine Oil Pump {0645, 0707, 1325}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Specifications
Oil Pump
3306 VEHICULAR ENGINE
Engine Oil Pressure
3306 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Disassembly and Assembly
Oil Pump
NO. 120 & NO. 140 ENGINE
Oil Pump (Direct Drive)
NO. 120 & NO. 140 ENGINE
Oil Pump (Power Shift)
NO. 120 & NO. 140 ENGINE
Service Magazine
New Oil Pump Groups Do Not Require Key On Drive Shaft {1304}
1993/02/15
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Service Magazine
New Oil Pump Groups Do Not Require Key On Drive Shaft {1304}
1993/02/15
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Tool Operating Manual
464-8520 Quick Drain Engine Oil Pump {0645, 0707, 1325}
464-8520 Quick Drain Engine Oil Pump {0645, 0707, 1325}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Truck sale:

Caterpillar 120 LVR, motor graders, Construction
250,000 
Caterpillar 120 LVR, motor graders, Construction
- motor graders
RING POWER CORP.
Caterpillar 120 LVR, motor graders, Construction
250,000 
Caterpillar 120 LVR, motor graders, Construction
- motor graders
RING POWER CORP.
Caterpillar 120, motor graders, Construction
278,720 
Caterpillar 120, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 120 LVR, motor graders, Construction
250,000 
Caterpillar 120 LVR, motor graders, Construction
- motor graders
RING POWER CORP.
 
 
Caterpillar LIFT TRUCKS EJE120E, Misc Forklifts, Material handling equipment
- Misc Forklifts
MADISA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.