AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

TRANSMISSION LUBRICATION SYSTEM (7D9550 N/S) Serial No. 10R1918 to 10R1945 and 10R1947-Up and 22R919-Up 7D5460 Filter parts are shown on Page 64B 120


POWER TRAIN
TRANSMISSION GP
FILTER GP
WHEEL GP
FILTER GP
WHEEL GP
AXLE GP
DRIVE GP
BRAKING SYSTEM
CONTROL GP

MOTOR GRADER 120 MOTOR GRADER 10R
 120 MOTOR GRADER 10R00001-02881 (MACHINE) UEG0231S 120 10R   (1969)

POWER TRAIN

TRANSMISSION GP
5D-7700 TRANSMISSION CASE AND COVERS
TRANSMISSION LUBRICATION SYSTEM
6D-3560 TRANSMISSION LUBRICATION SYSTEM
LUBRICATION GP-TRANSMISSION
7D-9550 LUBRICATION GP-TRANSMISSION
THIRD AND FOURTH REVERSE GEAR GROUP
6D-6160 THIRD AND FOURTH REVERSE GEAR GROUP
THIRD AND FOURTH REVERSE GEAR GROUP
8D-7630 THIRD AND FOURTH REVERSE GEAR GROUP
 

#UEG0231S0120
 

7D-9550: LUBRICATION GP-TRANSMISSION

TRANSMISSION LUBRICATION SYSTEM (7D9550 N/S)
Serial No. 10R1918 to 10R1945 and 10R1947-Up and 22R919-Up
7D5460 Filter parts are shown on Page 64B
c136655 UEG0231S
7D9550 LUBRICATION GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1026 [3] PLUG  
2. 0T-0102 [3] BOLT  
3. 8B-6127 [1] CLIP  
4. 7D-5460 Y [1] FILTER GROUP  
    (See Separate Illustration)
  7D-5441 [1] GASKET  
5. 1D-4717 [12] NUT  
  3B-4506 [12] LOCKWASHER  
6. 1Y-0016 [2] SCREW  
  3S-2362 [2] LOCK  
7. 2B-2404 [2] CLIP  
8. 7D-5758 [1] TUBE ASSEM.  
9. 7D-5761 [1] TUBE ASSEM.  
10. 1A-1503 [2] FERRULE  
11. 3D-6356 [1] BELL ASSEM.  
  4F-2627 [1] GASKET  
  0S-1617 [2] BOLT  
  2A-5328 [2] LOCK  
12. 5F-0304 [1] PLUG  
  2A-1162 [1] GASKET  
13. 7D-5428 [1] BASE  
14. 6D-3356 [1] GASKET  
15. 2A-3630 [2] PIN  
16. 1A-2029 [4] BOLT  
  0L-0364 [4] LOCK  
17. 7D-5754 [1] TUBE ASSEM.  
18. 2F-3889 [1] FERRULE  
19. 4D-3337 [1] FERRULE  
20. 1A-1496 [4] SCREW  
21. 4F-2464 [2] LOCK  
22. 3B-9363 [3] WASHER  
23. 7D-7771 [1] LOCK  
24. 3D-6676 [1] GEAR (19 Teeth)  
25. 1A-0530 [1] PIN  
26. 2L-8509 [1] RING  
27. 3D-6351 [1] PUMP GROUP  
  3D-6352 [1] BODY ASSEM.  
28. 4F-1113 [1] BEARING  
29. 5M-6687 [2] STUD  
30. 3F-4598 [1] SHAFT  
31. 2D-8764 [1] SHAFT  
32. 3F-4594 [1] GEAR (10 Teeth-Drive)  
33. 5B-9505 [1] PIN  
34. 6F-9878 [2] BOLT  
  1B-4204 [2] NUT  
  0T-0541 [2] LOCK  
35. 1B-8705 [1] KEY  
36. 4F-0327 [1] COVER ASSEM.  
37. 1H-3135 [1] BEARING  
38. 1D-4717 [2] NUT  
  0L-0364 [2] LOCK  
39. 4F-2611 [1] GEAR (10 Teeth-Idler)  
  Y   SEPARATE ILLUSTRATION
 

#UEG0231S0121
 

7D-5460: FILTER GP-OIL

7D5460 OIL FILTER GROUP
Serial No. 10R1918 to 10R1945 and 10R1947-Up and 22R919-Up
Part of Transmission Lubrication System shown on Page 64A
c136656 UEG0231S
7D5460 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3547 [1] NUT  
2. 5B-5977 [1] GASKET  
3. 5B-5974 [1] COVER  
4. 8B-5935 [1] ELEMENT (Disposable)  
5. 5B-5976 [1] CASE  
6. 2D-1929 [1] PILOT  
7. 6B-1263 [1] BAR  
8. 1F-2874 [1] SPRING  
9. 5F-0304 [1] PLUG  
  2A-1162 [1] GASKET  
10. 7D-5349 [1] BASE  
11. 5B-9419 [1] BALL  
12. 2D-1930 [1] SLEEVE  
13. 5B-5973 [2] GASKET  
14. 2D-1928 [1] PILOT  
15. 4H-1790 [1] SPRING  
 

#UEG0231S0122
 

7D-6870: REAR WHEELS AND TIRES

REAR WHEELS AND TIRES (7D6870 N/S)--13.00 x 24 Tubeless Tires
Serial No. 10R1 to 10R2222 inclusive
Refer also to Pages 127 and 128 for special parts
c109553 UEG0231S
7D6870 REAR WHEELS AND TIRES Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2D-2567 [4] FLANGE  
  2D-5238 [56] STUD  
    (14 IN EACH WHEEL ASSEM 2D7612)
  4D-6171 [56] NUT  
  2D-8114 [56] CLAMP  
  2D-7612 [4] WHEEL ASSEM.  
  2D-2568 [4] BASE  
  2D-2565 [4] SEAL  
  2D-2566 [4] RING  
  6K-0248 [4] VALVE ASSEM.  
  2D-2632 [1] HOUSING  
    (INTERNAL THREADS)
  6D-0443 [1] HOUSING ASSEM.  
    (EXTERNAL THREADS)
  2D-2633 [1] CAP  
  2D-2628 [1] CORE  
    (PART OF HOUSING ASSEM. 6D443)
  2D-2631 [2] NUT  
  [1] STEM  
  2D-2630 [1] WASHER  
  3K-2360 [1] GROMMET  
 

#UEG0231S0123
 

6D-3390: OIL FILTER GROUP

6D3390 OIL FILTER GROUP
Serial No. 10R1 to 10R1917 and 10R1946 inclusive and 22R1 to 22R918 inclusive
Part of 6D3560 Transmission Lubrication System shown on Page 64
c109511 UEG0231S
6D3390 OIL FILTER GROUP Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3547 [1] NUT  
2. 5B-5977 [1] GASKET  
3. 2D-1928 [1] PILOT  
4. 5B-5974 [1] COVER  
5. 5B-5976 [1] CASE  
6. 0S-1591 [2] BOLT  
7. 3B-4506 [2] LOCKWASHER  
8. 5B-5971 [2] CLAMP  
9. 5F-0304 [1] PLUG  
10. 2A-1162 [1] GASKET  
11. 5B-9419 [1] BALL  
12. 7D-4622 [1] BASE  
13. 6B-1263 [1] BAR  
14. 1F-2874 [1] SPRING  
15. 2D-1930 [1] SLEEVE  
16. 2D-1929 [1] PILOT  
17. 8B-5935 [1] ELEMENT (Disposable)  
18. 5B-5973 [2] GASKET  
19. 4H-1790 [1] SPRING  
 

#UEG0231S0124
 

7D-6870: REAR WHEEL AND TIRE GROUP

7D6870 REAR WHEEL AND TIRE GROUP
Serial No. 10R2223-Up. 13.00 x 24 TUBELESS TUBES
See Pages 127 and 128 for special parts
c153474 UEG0231S
7D6870 REAR WHEEL AND TIRE GROUP Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2D-2567 [4] FLANGE  
2. 4D-6171 [56] NUT  
  2D-8114 [56] CLAMP  
3. 2D-7612 C [4] WHEEL ASSEM.  
4. 2D-5238 [14] STUD  
5. 2D-2568 [4] BASE  
6. 2D-2565 [4] SEAL  
7. 2D-2566 [4] RING  
8. 8D-2830 C [4] VALVE GROUP  
  8D-2794 [1] STEM  
9. 6D-0443 [1] HOUSING ASSEM.  
    (External Threads)
10. 2D-2633 [1] CAP  
  2D-2628 [1] CORE  
11. 8D-2707 [1] SPUD ASSEM.  
  2S-2631 [1] NUT  
12. 2D-2629 [1] GROMMET  
13. 2D-2630 [1] WASHER  
  C   INDICATES CHANGE
 

#UEG0231S0125
 

2D-3460: REAR AXLE

REAR AXLE (2D3460 N/S)
Serial No. 10R1 to 10R1346 inclusive
c128358 UEG0231S
2D3460 REAR AXLE Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1599 [8] BOLT  
  2D-3468 [8] PLATE  
  7B-7054 [8] LOCK  
  1B-4205 [8] NUT  
  1B-4332 [8] NUT  
  3B-4514 [8] LOCKWASHER  
  2D-3466 [1] GEAR (38 TEETH)  
  2D-9457 [2] CONE  
  7B-0368 [2] SEAL  
  6D-6943 [2] HOUSING  
  1B-4332 [8] NUT  
  3B-4514 [8] LOCKWASHER  
  6D-9454 C [16] SHIM  
    - OR -
  6D-9454 C [8] SHIM(.005"THICK)  
  7D-6011 C [4] SHIM(.020"THICK)  
  5H-4081 [2] SEAL  
  4F-2041 [2] CUP  
  6D-9193 [1] HUB  
  5D-0034 [2] PLATE  
  5D-0043 [2] GASKET  
  4D-6698 [2] BEARING  
  4D-6695 [2] SEAL  
  6D-6859 [2] BEARING  
  4B-9374 [4] CUP  
  6B-4841 [8] LOCK  
  0S-1566 [16] BOLT  
  4B-9373 [4] CONE  
  4D-6298 [2] NUT  
  5D-9906 [2] SHAFT  
  5D-8211 [12] WASHER  
  7B-0365 [12] SHIM (.0100"THICK)  
  7B-0366 [4] SHIM (.005"THICK)  
  2D-4010 [2] ADJUSTER  
  1M-9015 [2] SEAL  
  0S-1589 [28] BOLT  
  3B-4510 [28] LOCKWASHER  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEG0231S0126
 

7D-7630: AXLE GP-REAR

REAR AXLE (7D7630 N/S)
Effective with Serial No. 10R1347
c133476 UEG0231S
7D7630 AXLE GP-REAR Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [8] BOLT  
  [8] PLATE  
  [8] LOCK  
  [8] NUT  
  [8] NUT  
  [8] LOCKWASHER  
  [1] GEAR (38 TEETH)  
  [2] CONE  
  [2] SEAL  
  [2] HOUSING  
  [8] NUT  
  [8] LOCKWASHER  
  [8] SHIM (.005" THICK)  
  [4] SHIM (.020" THICK)  
  [2] SEAL  
  [2] CUP  
  [1] HUB  
  [2] PLATE  
  [2] GASKET  
  [2] BEARING  
  [2] SEAL  
  [2] BEARING  
  [4] CUP  
  [8] LOCK  
  [16] BOLT  
  [4] CONE  
  [2] SPACER  
  [2] RETAINER  
  [2] SHAFT  
  [4] BOLT  
  [2] LOCK  
  [12] WASHER  
  [12] SHIM (.0100" THICK)  
  [4] SHIM (.005" THICK)  
  [2] ADJUSTER  
  [2] SEAL  
  [28] BOLT  
  [28] LOCKWASHER  
 

#UEG0231S0127
 

6D-2490: TANDEM DRIVE HOUSING

TANDEM DRIVE HOUSING (6D2490 N/S)
Serial No. 10R1 to 10R1346 inclusive and 22R1 to 22R869 inclusive
c109001 UEG0231S
6D2490 TANDEM DRIVE HOUSING Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1621 [32] BOLT  
  3B-4508 [52] LOCKWASHER  
  2B-3148 [8] COVER  
  2B-3147 [8] GASKET  
  3D-2136 [4] SPROCKET  
  4D-4035 [40] SHIM  
  2B-3184 [4] CONE  
  1B-3931 [4] CUP  
  7D-6219 [2] CAGE  
  4D-6576 [30] STUD  
  1D-4719 [30] NUT  
  3B-4508 [30] LOCKWASHER  
  1D-4720 [40] NUT  
  3B-4510 [40] LOCKWASHER  
  8F-8733 [4] SEAL  
  3D-9932 [4] CAGE  
  3D-2094 [48] BOLT  
  7H-7810 [48] NUT  
  0S-0468 [40] STUD  
    (1/2 IN EACH 6D9732 ASSEM)
  1D-4720 [40] NUT  
  3B-4510 [40] LOCKWASHER  
  8F-5900 [8] SEAL  
  4B-9508 [4] RING  
  4B-2732 [4] GASKET  
  4B-2733 [4] RETAINER  
  4D-6236 [2] CAGE  
  4D-3848 [4] CONE  
  1B-3931 [4] CUP  
  5D-0505 [4] SEAL  
  7D-3744 [4] SPINDLE  
  6D-2403 [4] WASHER  
  1M-2069 [4] NUT  
  8F-8049 [4] LOCK  
  1D-4720 [36] NUT  
  3B-4510 [36] WASHER  
  0S-0468 [36] STUD  
    (1/2 IN EACH 6D9732 ASSEM.)
  3D-2236 [2] SPROCKET ASSEM.  
  5D-2035 [2] SPACER  
  2D-3397 [4] CHAIN  
  5B-6379 [25] LINK  
  5B-6390 [1] LINK (Master)  
  5B-6401 [24] LINK  
  3D-7438 [2] RING ASSEM.  
  3D-5457 [2] CAGE  
  5B-5295 [4] GASKET  
  5D-4799 [2] BEARING  
  3D-5456 [2] COVER  
  0S-1603 [20] BOLT  
  0S-1749 [40] STUD  
    (20 IN EACH 6D9732 ASSEM.)
  8F-6528 [4] BOLT  
  0L-1147 [8] GASKET  
  1B-4443 [12] NUT  
  [12] COTTER PIN  
  6D-9732 [2] HOUSING ASSEM  
  1B-5174 [2] PLUG  
  7D-0470 [2] PLUNGER ASSEM.  
  6D-9677 [1] FILTER  
  6D-9674 [1] NUT  
    (PARTS OF ASSEM. 7D470)
  8S-9089 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  5D-6750 [2] CAGE  
  0T-0217 [4] KEY  
  3D-5606 [2] CAGE  
  7D-6568 [2] COVER ASSEM.  
  7D-6567 [2] COVER  
  3D-2981 [4] GASKET  
 

#UEG0231S0128
 

7D-7640: TANDEM DRIVE HOUSING

TANDEM DRIVE HOUSING (7D7640 N/S)
Effective with Serial No. 10R1347-Up and 22R870-Up
c142587 UEG0231S
7D7640 TANDEM DRIVE HOUSING Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-9732 [2] HOUSING ASSEM.  
2. 0S-0468 [38] STUD  
3. 0S-1749 [20] STUD  
4. 1D-4720 [116] NUT  
  3B-4510 [116] LOCKWASHER  
5. 8F-5900 [8] SEAL  
6. 2B-3184 [4] CONE  
7. 1B-3931 [8] CUP  
8. 7D-6219 [2] CAGE  
9. 8F-8733 [4] SEAL  
10. 4D-6576 [30] STUD  
11. 1D-4719 [30] NUT  
12. 3B-4508 C [64] LOCKWASHER  
13. 4D-4035 [40] SHIM  
14. 3D-9932 [4] CAGE  
15. 7D-7427 [8] SPROCKET  
16. 8F-6528 [4] BOLT  
17. 1B-4443 [12] NUT  
18. [12] COTTER PIN  
19. 0L-1147 [8] GASKET  
20. 2D-3397 [4] CHAIN  
  5B-6379 [25] LINK  
  5B-6390 [1] LINK (Master)  
  5B-6401 [24] LINK  
21. 7D-6568 [2] COVER ASSEM.  
  4F-0440 [1] NIPPLE  
  7D-6567 [2] COVER (Solid)  
22. 3D-2981 [4] GASKET  
23. 2B-3148 [8] COVER  
  2B-3147 [8] GASKET  
24. 7D-0470 [2] PLUNGER ASSEM.  
  6D-9677 [1] FILTER  
  6D-9679 [1] NUT  
25. 5D-6750 [2] CAGE  
26. 8S-9089 [2] BOLT  
27. 3D-5606 [2] CAGE  
28. 0S-1621 [32] BOLT  
29. 9D-0312 C [20] BOLT  
30. 3D-7438 [2] RING ASSEM.  
31. 3D-5456 [2] COVER  
32. 7D-7259 [2] BEARING  
33. 7D-6531 [2] SPACER  
34. 3D-5457 [2] CAGE  
35. 5B-5295 [4] GASKET  
36. 5D-3252 [4] RING  
37. 1B-5174 [2] PLUG  
38. 5D-0505 [4] SEAL  
39. 7D-6546 [4] SPINDLE  
40. 0T-0217 [4] KEY  
41. 1M-2069 [4] NUT  
  6D-2403 [4] WASHER  
  8F-8049 [4] LOCK  
42. 4D-3848 [4] CONE  
43. 4D-6236 [2] CAGE  
44. 4B-9508 [4] RING  
  4B-2732 [4] GASKET  
  4B-2733 [4] RETAINER  
45. 3F-0011 [4] DOWEL  
  C   INDICATES CHANGE
 

#UEG0231S0129
 

6D-2480: HYDRAULIC BRAKE CONTROL

HYDRAULIC BRAKE CONTROL (6D2480 N/S)
Serial No. 10R1 to 10R971 inclusive and 22R1 to 22R841 inclusive
2D9600 Cylinder parts are shown on Page 69
Refer also to Pages 121 and 122 for special parts
c126411 UEG0231S
6D2480 HYDRAULIC BRAKE CONTROL Parts scheme
  For full view, you need register

Parts for your 120 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-3376 [1] TUBE ASSEM.  
    (LEFT HAND)
  8M-2772 [1] CLIP  
  5D-3374 [1] TUBE ASSEM.  
    (RIGHT HAND)
  4B-8756 [4] NUT  
    (2 IN EACH ASSEM. 5D3374 & 5D3376)
  7F-5055 [2] BRACKET  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  1B-9982 [2] NUT  
  4B-7054 [2] LOCK  
  4B-8756 [2] NUT  
    (1 IN EACH ASSEM 6D9566 & 6D9565)
  0S-0509 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  [2] CLIP  
  0S-1617 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
  3H-3920 [2] TEE ASSEM.  
  4B-8720 [2] PLUG  
  C [6] CLIP  
  6D-9566 C [1] TUBE ASSEM. (R.H.)  
  6D-9565 C [1] TUBE ASSEM. (L.H.)  
  2D-7805 [2] ARMOR  
    (1 IN EACH ASSEM. 6D9566 & 6D9565)
  5D-8352 [2] NUT  
    (1 IN EACH ASSEM. 6D9566 & 6D9565)
  4D-8122 [1] TEE  
  3L-9689 [1] WASHER  
  0S-1591 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  5D-3378 [1] TUBE ASSEM.  
  4B-8774 [2] NUT  
    (PART OF ASSEM. 5D3378)
  2D-9600 Y [1] CYLINDER ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  5B-3254 [1] NUT  
  2D-8718 [1] ROD  
  0S-0175 [1] PIN  
  3B-4617 [1] COTTER PIN  
  0S-0509 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  4D-8123 [3] CLIP  
  4B-0418 [1] CLIP  
  5B-0494 [1] GROMMET  
  0S-0509 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4B-8761 [2] HOSE ASSEM  
  0T-0065 [2] BOLT  
  1D-4717 [2] NUT  
  3B-4506 [2] LOCKWASHER  
  3B-1915 [4] BOLT  
  1D-4717 [4] NUT  
  3B-4506 [4] LOCKWASHER  
  2D-9608 [1] CONNECTOR  
  5H-3703 [1] GASKET  
  4H-6143 [1] BOLT  
  4H-6145 [1] GASKET  
  5M-6214 [1] PLUG  
  2D-8820 [1] BRACKET  
  C   INDICATES CHANGE FROM PREVIOUS
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Transmission Oil Pump<BR> (3D6351)
NO. 120 & NO. 140 MOTOR GRADERS POWER TRAIN
Transmission Oil Filter<BR> (6D3390)
NO. 120 & NO. 140 MOTOR GRADERS POWER TRAIN
Transmission
NO. 120 & NO. 140 MOTOR GRADERS POWER TRAIN
Clutch, Transmission And Bevel Gear Housing
NO. 120 & NO. 140 MOTOR GRADERS POWER TRAIN
Transmission And Scavenger Pump<BR> (4S5960)
NO. 120 & NO. 140 MOTOR GRADERS (POWER SHIFT TRANSMISSION)
Range Transmission
NO. 120 & NO. 140 MOTOR GRADERS (POWER SHIFT TRANSMISSION)
Engine Mounting Bolts
3306 VEHICULAR ENGINE
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Testing And Adjusting
NO. 12, NO. 14, NO. 120, NO. 140 MOTOR GRADERS
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission Oil Cooler
NO. 120 & NO. 140 ENGINE
Transmission Oil Pump (Power Shift)
NO. 120 & NO. 140 MOTOR GRADER POWER TRAIN
Power Shift Transmission
NO. 120 & NO. 140 MOTOR GRADER POWER TRAIN
Transmission Oil Pump (Direct Drive)
NO. 120 & NO. 140 MOTOR GRADER POWER TRAIN
Direct Drive Transmission
NO. 120 & NO. 140 MOTOR GRADER POWER TRAIN
Service Magazine
Inspect 6B9277 Gaskets For Oil Flow Restriction Before Installation{3060}
1986/12/22
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 120 :

TRANSMISSION LUBRICATION SYSTEM
6D-3560 TRANSMISSION LUBRICATION SYSTEM
5D-3220 GEAR SHIFT
GEAR SHIFT
5D-3220 GEAR SHIFT
5D-3220 GEAR SHIFT
GEAR SHIFT
5D-3220 GEAR SHIFT
5D-7700 TRANSMISSION CASE AND COVERS
TRANSMISSION CASE AND COVERS
5D-7700 TRANSMISSION CASE AND COVERS
5D-3400 CASE & COVERS GP-TMSN
FILTER GP-OIL
7D-5460 FILTER GP-OIL
REAR WHEELS AND TIRES
7D-6870 REAR WHEELS AND TIRES
OIL FILTER GROUP
6D-3390 OIL FILTER GROUP
REAR WHEEL AND TIRE GROUP
7D-6870 REAR WHEEL AND TIRE GROUP
REAR AXLE
2D-3460 REAR AXLE
AXLE GP-REAR
7D-7630 AXLE GP-REAR
TANDEM DRIVE HOUSING
6D-2490 TANDEM DRIVE HOUSING
TANDEM DRIVE HOUSING
7D-7640 TANDEM DRIVE HOUSING

Truck sale:

Caterpillar 120 LVR, motor graders, Construction
250,000 
Caterpillar 120 LVR, motor graders, Construction
- motor graders
RING POWER CORP.
Caterpillar 120 LVR, motor graders, Construction
250,000 
Caterpillar 120 LVR, motor graders, Construction
- motor graders
RING POWER CORP.
Caterpillar 120, motor graders, Construction
278,720 
Caterpillar 120, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 120 LVR, motor graders, Construction
250,000 
Caterpillar 120 LVR, motor graders, Construction
- motor graders
RING POWER CORP.
 
 
Caterpillar LIFT TRUCKS EJE120E, Misc Forklifts, Material handling equipment
- Misc Forklifts
MADISA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.