AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (9S5780 N/S)--Side View--Part 1 of 2 Serial No. 94N1 to 94N2070 inclusive. 5S6778 Block parts are shown on Page 22 Note: 9S8914 Piston & Liner Group, consisting of: 1-Piston Assembly, 1-Liner and 2-Seal is available. See Page 24 for Gasket Kits D7F


BASIC ENGINE
CYLINDER BLOCK GP

TRACK-TYPE TRACTOR D7F TRACK-TYPE TRACTOR 94N
 D7F TRACTOR 94N00001-05191 (MACHINE) UEG0234S D7F 94N   (1970)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
 

#UEG0234S0030
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--Side View--Part 1 of 2
Serial No. 94N1 to 94N2070 inclusive. 5S6778 Block parts are shown on Page 22
Note: 9S8914 Piston & Liner Group, consisting of: 1-Piston Assembly, 1-Liner and 2-Seal
is available. See Page 24 for Gasket Kits
c108330 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [12] BOLT  
2. 3B-4506 [63] LOCKWASHER  
3. 8M-3107 [1] COVER  
  6F-7062 [1] GASKET  
4. 5S-6670 [12] SEAL  
5. 8M-9307 [1] PLUG  
  5B-8030 [1] SPACER  
6. 5S-6778 Y [1] BLOCK ASSEM.  
    (See Separate Illustration)
7. 9S-6557 [6] LINER  
8. 5B-8030 [1] SPACER  
9. 5S-7135 [1] GASKET  
10. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
    (Part of 9S2273 Assem.)
11. 1C-2251 [2] BOLT  
12. 5M-6213 [6] PLUG  
13. 5S-7134 [1] GASKET  
14. 8S-6086 [1] PAN  
15. 9H-6067 [1] SEAL  
16. 8S-0501 [1] TUBE ASSEM.  
17. 0S-1591 [13] BOLT  
18. 0L-1352 [3] BOLT  
19. 8S-1965 [1] GASKET  
20. 2A-4639 [7] BOLT  
21. 8S-1961 [1] PLATE ASSEM.  
  8S-1962 [1] NUT  
  8M-5362 [7] BOSS  
    (Parts of 8S1961 Assem.)
22. 0L-1351 [26] BOLT  
23. 8M-3023 [6] ORIFICE  
24. 4M-2969 [1] GASKET  
25. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
26. 2A-3798 [2] DOWEL  
27. 9S-7036 [1] HOUSING ASSEM.  
28. 3D-0490 [12] STUD  
29. 2A-3798 [2] DOWEL  
30. 3F-0957 [4] DOWEL  
31. 3F-6795 [6] DOWEL  
32. 9S-6729 [2] BEARING  
  7L-4265 [2] WASHER  
33. 5M-6214 [2] PLUG  
    (Parts of 9S7036 Assem.)
34. 4B-3938 [1] PLUG  
35. 9H-5921 [1] GASKET  
36. 3B-8998 [2] FITTING  
  1F-1344 [2] NUT  
    (One in each 3B8998 Fitting)
37. 9S-1759 [1] TUBE  
38. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#UEG0234S0031
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--End View--Part 1 of 2
Serial No. 94N1 to 94N2070 inclusive
Refer also to Page 125 for special parts
c109790 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-3187 [1] LOCK  
2. 0S-1594 [8] BOLT  
3. 7M-0232 [1] COVER  
  9H-4891 [1] GASKET  
4. 5S-8055 [1] GASKET  
5. 5S-6385 [1] COVER ASSEM.  
6. 0L-0659 [4] STUD  
7. 8S-6814 [2] DOWEL  
8. 3B-2460 [1] STUD  
    (Parts of 5S6385 Assem.)
9. 1B-4203 [6] NUT  
10. 3B-4506 [23] LOCKWASHER  
11. 1A-2029 [2] BOLT (1.125" long)  
  7H-7954 [1] BOLT (2.125" long)  
12. 9S-1796 [1] TUBE ASSEM.  
13. 8S-3995 [1] GAUGE ASSEM.  
14. 9S-1434 [1] PIPE  
  7S-1801 [1] ANCHOR  
15. 7S-1803 [1] CAP ASSEM.  
16. 9S-8926 [1] SUPPORT ASSEM.  
17. 2B-2994 [2] DOWEL  
18. 0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
19. 9S-6730 [2] SHIM  
  9S-6731 [2] SHIM  
  9S-7072 [2] SHIM  
20. 1D-4612 [4] BOLT  
21. 5H-1504 [4] WASHER  
22. 1A-5822 [3] BOLT (2.75" long)  
  9S-1366 [1] BOLT (2.50" long)  
23. 1D-5117 [4] NUT  
24. 3B-4508 [8] LOCKWASHER  
25. 9S-3188 [1] LOCK  
26. 9H-5919 [1] COVER  
  5S-9594 [1] GASKET  
27. 4M-4419 [1] LOCK  
28. 8S-1326 [1] FITTING  
  8F-8998 [1] NUT  
    (Part of 8S1326 Fitting)
29. 0T-0573 [5] BOLT  
30. 4B-7739 [1] PLUG  
31. 0S-1595 [4] BOLT  
32. 3B-2968 [2] BOLT  
  2J-3506 [2] NUT  
  2S-0115 [2] WASHER  
33. 1P-6074 [1] SUPPORT ASSEM.  
  7S-1234 [1] BUSHING ASSEM.  
34. 0L-1143 [9] BOLT  
35. 9S-8925 [1] SUPPORT ASSEM.  
36. 0S-1587 [9] BOLT  
37. 5M-9136 [1] LOCK  
38. 5M-9132 [1] LOCK  
39. 5M-9135 [1] LOCK  
40. 7M-7205 [1] LOCK  
41. 0S-1585 [4] BOLT  
42. 5M-9131 [1] LOCK  
 

#UEG0234S0032
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--Side View--Part 1 of 2
Serial No. 94N2071 to 94N2119 inclusive
5S6778 Cylinder Block parts are shown on Page 22. Note: 9S8914 Piston and Liner Group, consisting of:
1-Piston Assembly, 1-Liner and 2-Seal, is available. See Page 24 for Gasket Kits
c135519 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [12] BOLT  
2. 3B-4506 [63] LOCKWASHER  
3. 8M-3107 [1] COVER  
  6F-7062 [1] GASKET  
4. 5S-6670 [12] SEAL  
5. 8M-9307 [1] PLUG  
  5B-8030 [1] SPACER  
6. 5S-6778 Y [1] BLOCK ASSEM.  
    (See Separate Illustration)
7. 9S-6557 [6] LINER  
8. 5B-8030 [1] SPACER  
9. 5S-7135 [1] GASKET  
10. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
    (Part of 9S2273 Assem.)
11. 1C-2251 [2] BOLT  
12. 5M-6213 [6] PLUG  
13. 5S-7134 [1] GASKET  
14. 8S-6086 [1] PAN  
15. 9H-6067 [1] SEAL  
16. 8S-0501 [1] TUBE ASSEM.  
17. 0S-1591 [13] BOLT  
18. 0L-1352 [3] BOLT  
19. 8S-1965 [1] GASKET  
20. 2A-4639 [7] BOLT  
21. 8S-1961 [1] PLATE ASSEM.  
  8S-1962 [1] NUT  
  8M-5362 [7] BOSS  
    (Parts of 8S1961 Assem.)
22. 0L-1351 [26] BOLT  
23. 8M-3023 [6] ORIFICE  
24. 4M-2969 [1] GASKET  
25. 0T-0102 [1] BOLT  
  0L-0364 [1] LOCK  
26. 2A-3798 [2] DOWEL  
27. 9S-7036 [1] HOUSING ASSEM.  
28. 3D-0490 [12] STUD  
29. 2A-3798 [2] DOWEL  
30. 3F-0957 [4] DOWEL  
31. 3F-6795 [6] DOWEL  
32. 9S-6729 [2] BEARING  
  7L-4265 [2] WASHER  
33. 5M-6214 [2] PLUG  
    (Parts of 9S7036 Assem.)
34. 4B-3938 [1] PLUG  
35. 9H-5921 [1] GASKET  
36. 3B-8998 [2] FITTING  
  1F-1344 [2] NUT  
    (One in each 3B8998 Fitting)
37. 9S-1759 [1] TUBE  
38. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#UEG0234S0033
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--End View--Part 2 of 2
Serial No. 94N2071 to 94N2119 inclusive
Refer also to Page 125 for special parts
c135870 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-3187 [1] LOCK  
2. 0S-1594 [8] BOLT  
3. 2N-2753 [1] COVER  
  9H-4891 [1] GASKET  
4. 5S-8055 [1] GASKET  
5. 9S-8991 [1] COVER ASSEM.  
6. 0T-0101 [4] STUD  
7. 8S-6814 [2] DOWEL  
8. 3B-2460 [1] STUD  
    (Parts of 9S8991 Assem.)
9. 1B-4203 [6] NUT  
10. 3B-4506 [23] LOCKWASHER  
11. 1A-2029 [2] BOLT (1.125" long)  
  7H-7954 [1] BOLT (2.125" long)  
12. 9S-1796 [1] TUBE ASSEM.  
13. 8S-3995 [1] GAUGE ASSEM.  
14. 9S-1434 [1] PIPE  
  7S-1801 [1] ANCHOR  
15. 7S-1803 [1] CAP ASSEM.  
16. 9S-8926 [1] SUPPORT ASSEM.  
17. 2B-2994 [2] DOWEL  
18. 0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
19. 9S-6730 [2] SHIM  
  9S-6731 [2] SHIM  
  9S-7072 [2] SHIM  
20. 1D-4612 [4] BOLT  
21. 5H-1504 [4] WASHER  
22. 1A-5822 [3] BOLT (2.75" long)  
  9S-1366 [1] BOLT (2.50" long)  
23. 1D-5117 [4] NUT  
24. 3B-4508 [8] LOCKWASHER  
25. 9S-3188 [1] LOCK  
26. 9H-5919 [1] COVER  
  5S-9594 [1] GASKET  
27. 4M-4419 [1] LOCK  
28. 8S-1326 [1] FITTING  
  8F-8998 [1] NUT  
    (Part of 8S1326 Fitting)
29. 0T-0573 [5] BOLT  
30. 4B-7739 [1] PLUG  
31. 0S-1595 [4] BOLT  
32. 3B-2968 [2] BOLT  
  2J-3506 [2] NUT  
  2S-0115 [2] WASHER  
33. 1P-6074 [1] SUPPORT ASSEM.  
  7S-1234 [1] BUSHING ASSEM.  
34. 0L-1143 [9] BOLT  
35. 9S-8925 [1] SUPPORT ASSEM.  
36. 0S-1587 [9] BOLT  
37. 5M-9136 [1] LOCK  
38. 5M-9132 [1] LOCK  
39. 5M-9135 [1] LOCK  
40. 7M-7205 [1] LOCK  
41. 0S-1585 [4] BOLT  
42. 5M-9131 [1] LOCK  
 

#UEG0234S0034
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--Part 1 of 3
Serial No. 94N2120 to 94N2164 inclusive
5S6778 Cylinder Block parts are shown on Page 22. Note: 9S8914 Piston and Liner Group, consisting of:
1-Piston Assembly, 1-Liner and 2-Seal, is available. See Page 24 for Gasket Kits
c112399 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-6778 Y [1] BLOCK ASSEM.  
    (See Separate Illustration)
2. 9S-6557 [6] LINER  
  5S-6670 [12] SEAL  
3. 9S-1796 [1] TUBE ASSEM.  
4. 8S-3995 [1] GAUGE ASSEM.  
5. 8M-3023 [6] ORIFICE  
6. 7S-1803 [1] CAP ASSEM.  
7. 9S-1434 [1] PIPE  
  7S-1801 [1] ANCHOR  
  5S-8055 [1] GASKET  
8. 7H-7954 [1] BOLT  
9. 3B-4506 [57] LOCKWASHER  
10. 1A-2029 [2] BOLT  
11. 5M-6213 [6] PLUG  
12. 4M-2969 [1] GASKET  
13. 8S-1961 [1] PLATE ASSEM.  
  8S-1962 [1] NUT  
  8M-5362 [7] BOSS  
14. 0L-1351 [26] BOLT  
15. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
16. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
17. 9S-1759 [1] TUBE  
18. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
19. 0S-1591 [13] BOLT (1.50 long)  
  2A-4639 [7] BOLT (1.625" long)  
20. 4B-4278 C [28] WASHER  
21. 5B-8030 [1] SPACER  
22. 8S-1326 [1] FITTING  
  8F-8998 [1] NUT  
23. 4B-7739 [1] PLUG  
24. 0L-1352 [3] BOLT  
25. 0T-0573 [5] BOLT  
26. 9S-5417 C [1] PAN  
27. 8S-1965 [1] GASKET  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0234S0035
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--Part 2 of 3
Serial No. 94N2120 to 94N2164 inclusive
Refer also to Page 125 for special parts
c112400 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [9] BOLT  
2. 3B-4506 [17] LOCKWASHER  
3. 9S-8991 [1] COVER ASSEM.  
4. 3B-2460 [1] STUD  
5. 8S-6814 [2] DOWEL  
6. 0T-0101 [4] STUD  
7. 2N-2753 [1] COVER  
  9H-4891 [1] GASKET  
8. 1C-2251 [2] BOLT  
9. 5S-7134 [1] GASKET  
10. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
11. 1B-4203 [6] NUT  
12. 5S-7135 [1] GASKET  
13. 9H-6067 [1] SEAL  
14. 8S-0501 [1] TUBE ASSEM.  
  0T-0102 [1] BOLT  
  0L-0364 [1] LOCK  
15. 9H-5919 [1] COVER  
16. 1A-5822 [3] BOLT  
17. 1D-5117 [4] NUT  
18. 3B-4508 [8] LOCKWASHER  
19. 5S-9594 [1] GASKET  
20. 9S-1366 [1] BOLT  
21. 0S-1595 [4] BOLT  
22. 1P-6074 [1] SUPPORT ASSEM.  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 3B-2968 [2] BOLT  
25. 2J-3506 [2] NUT  
26. 2S-0115 [2] WASHER  
27. 9S-3187 [1] LOCK (3 hole-5.04" long)  
  9S-3188 [1] LOCK (3 hole-4.50" long)  
  4M-4419 [1] LOCK (2 hole-3.31" long)  
  0S-1594 [8] BOLT  
 

#UEG0234S0036
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--Part 3 of 3
Serial No. 94N2120 to 94N2164 inclusive
c113966 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8925 [1] SUPPORT ASSEM.  
2. 8M-3107 [1] COVER  
  2S-4750 [1] GASKET  
3. 0S-1594 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
4. 9S-7036 [1] HOUSING ASSEM.  
5. 3F-0957 [4] DOWEL  
6. 9S-6729 [2] BEARING  
7. 7L-4265 [2] WASHER  
8. 5M-6214 [2] PLUG  
9. 3F-6795 [6] DOWEL  
10. 3D-0490 [12] STUD  
11. 2A-3798 [2] DOWEL  
12. 9H-5921 [1] GASKET  
13. 4B-3938 [1] PLUG  
14. 0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
15. 9S-8926 [1] SUPPORT ASSEM.  
  2B-2994 [2] DOWEL  
16. 9S-6730 [2] SHIM (.049" Thick)  
  [2] SHIM (.065" Thick)  
  9S-7072 [2] SHIM (.083" Thick)  
17. 1D-4612 [4] BOLT  
  5H-1504 [4] WASHER  
18. 2A-3798 [2] DOWEL  
19. 5M-9132 [1] LOCK  
20. 0S-1587 [9] BOLT  
21. 5M-9135 [1] LOCK  
22. 7M-7205 [1] LOCK  
23. 0S-1585 [4] BOLT  
24. 5M-9131 [1] LOCK  
25. 5M-9136 [1] LOCK  
 

#UEG0234S0037
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--Part 1 of 3
Serial No. 94N2165 to 94N3673 inclusive
5S6778 Cylinder Block parts are shown on Page 22. See Page 24 for Gasket Kits
c112406 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-6778 Y [1] BLOCK ASSEM.  
    (See Separate Illustration)
2. 9S-6557 [6] LINER  
  5S-6670 [12] SEAL  
3. 9S-1796 [1] TUBE ASSEM.  
4. 8S-3995 [1] GAUGE ASSEM.  
5. 8M-3023 [6] ORIFICE  
6. 7S-1803 [1] CAP ASSEM.  
7. 1P-6784 C [1] PIPE  
  7S-1801 [1] ANCHOR  
  5S-8055 [1] GASKET  
8. 2H-5330 C [2] BOLT  
9. 3B-4506 [57] LOCKWASHER  
10. 1A-2029 C [1] BOLT  
11. 5M-6213 [6] PLUG  
12. 4M-2969 [1] GASKET  
13. 8S-1961 [1] PLATE ASSEM.  
  8S-1962 [1] NUT  
  8M-5362 [7] BOSS  
14. 0L-1351 [26] BOLT  
15. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
16. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
17. 9S-1759 [1] TUBE  
18. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
19. 0S-1591 [13] BOLT (1.50 long)  
  2A-4639 [7] BOLT (1.625" long)  
20. 4B-4278 [28] WASHER  
21. 5B-8030 [1] SPACER  
22. 8S-1326 [1] FITTING  
  8F-8998 [1] NUT  
23. 4B-7739 [1] PLUG  
24. 0L-1352 [3] BOLT  
25. 0T-0573 [5] BOLT  
26. 9S-5417 [1] PAN  
27. 8S-1965 [1] GASKET  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0234S0038
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--Part 2 of 3
Serial No. 94N2165 to 94N3673 inclusive
Refer also to Page 125 for special parts
c112407 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [9] BOLT  
2. [17] LOCKWASHER  
3. [1] COVER ASSEM.  
4. [1] STUD  
5. [2] DOWEL  
6. [4] STUD  
7. [1] COVER  
  [1] GASKET  
8. [2] BOLT  
9. [1] GASKET  
10. [1] PLATE ASSEM.  
  [1] STUD  
11. [6] NUT  
12. [1] GASKET  
13. [1] SEAL  
14. [1] TUBE ASSEM.  
  [1] BOLT  
  [1] LOCK  
15. [1] COVER  
16. [3] BOLT  
17. [4] NUT  
18. [8] LOCKWASHER  
19. [1] GASKET  
20. [1] BOLT  
21. [4] BOLT  
22. [1] SUPPORT ASSEM.  
23. [1] BUSHING ASSEM.  
24. [2] BOLT  
25. [2] NUT  
26. [2] WASHER  
27. [1] LOCK (3 hole-5.04" long)  
  [1] LOCK (3 hole-4.50" long)  
  [1] LOCK (2 hole-3.31" long)  
  [8] BOLT  
 

#UEG0234S0039
 

9S-5780: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S5780 N/S)--Part 3 of 3
Serial No. 94N2165 to 94N3673 inclusive
c147146 UEG0234S
9S5780 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8925 [1] SUPPORT ASSEM.  
2. 8M-3107 [1] COVER  
  2S-4750 [1] GASKET  
3. 0S-1594 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
4. 9S-7036 [1] HOUSING ASSEM.  
5. 3F-0957 [4] DOWEL  
6. 9S-6729 [2] BEARING  
7. 7L-4265 [2] WASHER  
8. 5M-6214 [2] PLUG  
9. 3F-6795 [6] DOWEL  
10. 3D-0490 [12] STUD  
11. 2A-3798 [2] DOWEL  
12. 9H-5921 [1] GASKET  
13. 4B-3938 [1] PLUG  
14. 0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
15. 9S-8926 [1] SUPPORT ASSEM.  
  2B-2994 [2] DOWEL  
16. 9S-6730 [2] SHIM (.049" Thick)  
  9S-6731 C [2] SHIM (.065" Thick)  
  9S-7072 [2] SHIM (.083" Thick)  
17. 1D-4612 [4] BOLT  
  5H-1504 [4] WASHER  
18. 2A-3798 [2] DOWEL  
19. 5M-9132 [1] LOCK  
20. 0S-1587 [9] BOLT  
21. 5M-9135 [1] LOCK  
22. 7M-7205 [1] LOCK  
23. 0S-1585 [4] BOLT  
24. 5M-9131 [1] LOCK  
25. 5M-9136 [1] LOCK  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block
3306 VEHICULAR ENGINE
Cylinder Liner
3306 VEHICULAR ENGINE
Cylinder Liner Projection
3306 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3306 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3306 VEHICULAR ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Crankshaft Main Bearings
D7F ENGINE
Cylinder Liners
D7F ENGINE
Camshaft Bearings
D7F ENGINE
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Caterpillar Parts SIS Catalog D7F :

CYLINDER HEAD AND VALVE MECHANISM
5S-6687 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6687 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6687 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6687 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6687 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6687 CYLINDER HEAD AND VALVE MECHANISM
MANIFOLD
9S-5788 MANIFOLD
MUFFLER
1P-6931 MUFFLER
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-5780 CYLINDER BLOCK AND COVERS

Truck sale:

CATERPILLAR D7F 1992
 
CATERPILLAR D7F 1992
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR D7F 1974
 
CATERPILLAR D7F 1974
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR D7F 1972
 
CATERPILLAR D7F 1972
- TRACK TYPE TRACTORS
FOLEY EQUIPMENT CO. (KS/MO)
1550 S. West Street - Wichita - Kansas
CAT D7F
USD $27,500 
CAT D7F

Powertrax Equipment Sales
1971 CAT D7F
USD $54,900 
1971 CAT D7F

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.