AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9S6701 GOVERNOR GROUP--Part 1 of 2 Serial No. 94N4951 Only Part of Fuel Pump Housing and Governor shown on Page 31 D7F


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL
FILTER GP-FUEL
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
LINES GP-FUEL

TRACK-TYPE TRACTOR D7F TRACK-TYPE TRACTOR 94N
 D7F TRACTOR 94N00001-05191 (MACHINE) UEG0234S D7F 94N   (1970)

FUEL SYSTEM

GOVERNOR GP
FUEL PUMP HOUSING AND GOVERNOR
9S-5979 FUEL PUMP HOUSING AND GOVERNOR
GOVERNOR GROUP
9S-6701 GOVERNOR GROUP
GOVERNOR GROUP
9S-6701 GOVERNOR GROUP
GOVERNOR GROUP
9S-6701 GOVERNOR GROUP
GOVERNOR GROUP
9S-6701 GOVERNOR GROUP
 

#UEG0234S0070
 

9S-6701: GOVERNOR GROUP

9S6701 GOVERNOR GROUP--Part 1 of 2
Serial No. 94N4951 Only
Part of Fuel Pump Housing and Governor shown on Page 31
c118496 UEG0234S
9S6701 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLUG  
2. [1] SPRING  
3. [3] COVER  
4. [1] SCREW ASSEM.  
  [1] SCREW  
  [1] END  
  [1] SPRING  
  [1] SLEEVE  
  [1] PIN  
5. [1] GASKET  
6. [1] HOUSING ASSEM.  
  [1] GUIDE  
7. [1] PLUG  
8. [1] PLUG  
9. [1] BEARING  
10. [1] PLATE ASSEM.  
11. [1] SEAL  
12. [1] SHAFT ASSEM.  
13. [1] GASKET  
14. [5] BOLT  
15. [2] ROLLER  
16. [2] SPRING  
17. [4] BOLT  
18. [1] PLUNGER  
19. [1] GASKET  
20. [1] SCREW (High Idle)  
21. [1] RING  
22. [1] SCREW  
  [1] NUT  
  [1] LOCKWASHER  
  [2] WASHER  
  [2] INSULATOR  
23. [1] SPRING  
24. [1] SHAFT ASSEM.  
25. C [4] LOCKWASHER  
26. [1] PLATE ASSEM.  
27. [2] SEAL  
28. [1] BOLT  
  C   INDICATES CHANGE
 

#UEG0234S0071
 

9S-6701: GOVERNOR GROUP

9S6701 GOVERNOR GROUP--Part 2 of 2
Serial No. 94N4951 Only
Part of Fuel Pump Housing and Governor shown on Page 31
c158253 UEG0234S
9S6701 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4154 [1] COLLAR  
2. 2S-7314 [1] GASKET  
3. 9S-4468 [1] BOLT  
  2F-4159 [1] LOCK  
4. 9S-4673 [1] BAND ASSEM.  
5. 9S-4466 [1] LEVER ASSEM.  
6. 9M-9788 [1] PLUNGER  
7. 7M-7316 [1] SPRING  
8. 5H-1351 [1] PIN  
9. 7B-8105 [1] LOCK  
10. 7L-8777 [1] SLEEVE  
11. 7S-8447 [1] PISTON ASSEM.  
12. 8M-8997 [1] SEAL  
13. 9M-6293 [1] LOCK  
14. 0S-1615 [3] BOLT  
15. 1S-4741 [1] CYLINDER  
16. 3K-0810 [1] RING  
17. 7M-7219 [1] BEARING  
18. 7M-7193 [2] RACE  
19. 2S-0007 [1] SLEEVE  
20. 8M-8726 [1] DOWEL  
21. 8M-8993 [1] RING  
22. 2S-0008 [1] SEAT  
23. 2N-0479 [1] WEIGHT ASSEM.  
  2N-0477 C [2] WEIGHT  
24. 1S-5440 [2] DOWEL  
25. 9M-6303 [1] SPRING  
26. 9M-6302 [2] WASHER  
27. 9M-4704 [1] SCREW  
28. 3S-9639 [1] SEAT ASSEM.  
29. 8H-9181 [1] SPRING  
30. 8M-8739 [1] BOLT  
31. 5S-9607 [1] NUT  
32. 8L-4155 [1] SCREW  
33. 8S-5061 [1] COVER  
34. 2S-7316 [1] DOWEL  
35. 2S-7235 [1] SPRING  
36. 2S-7289 [1] COLLAR  
  C   INDICATES CHANGE
 

#UEG0234S0072
 

9S-5495: FUEL LINES GROUP

9S5495 FUEL LINES GROUP
c112416 UEG0234S
9S5495 FUEL LINES GROUP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLUG  
2. [1] PLUG  
3. [2] VALVE ASSEM.  
4. [1] SCREEN  
5. [1] FITTING  
  [1] NUT  
  [1] SLEEVE  
6. [1] FITTING  
  [1] NUT  
7. H TUBE 86.59"  
8. [2] BOLT  
  [2] WASHER  
9. [3] CLIP  
10. H TUBE 71.52"  
11. [1] FITTING  
  [1] NUT  
  [1] SLEEVE  
12. [1] BOLT  
  [1] LOCKWASHER  
  H   ORDER BY THE FOOT
 

#UEG0234S0073
 

5S-9666: FUEL FILTER GROUP

5S9666 FUEL FILTER GROUP
c155237 UEG0234S
5S9666 FUEL FILTER GROUP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1927 [1] NEEDLE ASSEM.  
2. 7F-3901 [1] SEAT  
3. 1H-9722 [1] PLUG  
4. 5S-9580 [1] BASE  
5. 9S-4167 [1] STUD  
6. 1P-2299 Y [1] FILTER ASSEM.  
7. 1B-9575 [3] BOLT  
  8F-7242 [8] WASHER  
8. 5S-9020 [1] GASKET  
9. 5S-6333 [1] ADAPTER  
10. 8H-9402 [1] ADAPTER  
11. 9H-4557 [2] SEAL  
12. 5S-9060 [1] GASKET  
13. 9F-2247 [1] PLUG  
14. 5M-6214 [3] PLUG  
15. 4B-3388 [2] BOLT 1.25 in.(28.58 mm) long  
16. 1D-4538 [3] BOLT 2.25 in.(57.15 mm) long  
  Y   SEPARATE ILLUSTRATION
 

#UEG0234S0074
 

7S-4430: FUEL TRANSFER PUMP GROUP

7S4430 FUEL TRANSFER PUMP GROUP
c112418 UEG0234S
7S4430 FUEL TRANSFER PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-8616 [1] NUT  
2. 8H-9806 [1] GEAR (11 Teeth-Drive)  
3. 3H-1489 [1] KEY  
4. 8S-4375 [1] CAGE ASSEM.  
5. 8F-6058 [1] BUSHING  
6. 4S-7756 [2] SEAL  
7. 6J-2419 [2] SEAL  
8. 7S-4439 [1] RING  
9. 7S-2374 [1] GASKET  
10. 7S-4434 [1] BODY ASSEM.  
11. 2S-6838 [1] SHAFT  
12. 8F-6058 [1] BUSHING  
13. 3B-4505 H [2] LOCKWASHER  
14. 4B-3388 H [2] BOLT  
15. 8S-4368 [1] GEAR (10 Teeth-Idler)  
16. 8S-5581 [1] COVER ASSEM.  
17. 8S-5575 [1] SEAL  
18. 7S-4433 [2] FERRULE  
19. 7H-3171 [1] PLUG  
20. 8M-0874 [1] PLUNGER ASSEM.  
21. 8M-3210 [1] SPRING  
22. 2A-1913 [1] GASKET  
23. 7S-4440 [1] BOLT  
24. 7S-6701 [2] SCREW (1.75" long)  
25. 9F-6641 [4] SCREW (1.25" long)  
26. 8S-4373 [1] SHAFT ASSEM. (10 Teeth-Drive)  
  H   NOT PART OF 7S4430 FUEL TRANSF
 

#UEG0234S0075
 

7S-1251: FUEL PRIMING PUMP GROUP

7S1251 FUEL PRIMING PUMP GROUP
c145935 UEG0234S
7S1251 FUEL PRIMING PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-0210 [1] TUBE (Outlet)  
2. 3B-8998 [3] FITTING  
  1F-1344 [1] NUT  
3. 9H-2256 Y [1] PUMP GROUP (Fuel Priming)  
4. 8S-0211 [1] TUBE (Inlet)  
5. 1H-7922 [1] FITTING  
  1F-1344 [1] NUT  
6. 2B-2695 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
7. 7S-1129 [1] BRACKET  
  Y   SEPARATE ILLUSTRATION
 

#UEG0234S0076
 

9H-2256: PUMP ASSEMBLY

9H2256 PUMP ASSEMBLY
Part of 7S1251 Fuel Priming Pump
c147588 UEG0234S
9H2256 PUMP ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-6718 [ 2] BALL  
2. 1H-1023 [ 2] SEAL  
3. 1M-6781 [ 2] NUT  
 

#UEG0234S0077
 

5S-9076: FUEL PUMP HOUSING GROUP

5S9076 FUEL PUMP HOUSING GROUP--Type 1
Part of Fuel Pump Housing and Governor shown on Page 31
c130143 UEG0234S
5S9076 FUEL PUMP HOUSING GROUP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1M-3506 [ 6] RING  
  8M-3020 [ 6] DOWEL  
  8M-3019 [ 6] DOWEL  
    (PARTS OF HOUSING ASSEM 5S9051)
  2M-4208 [ 6] SPACER (174 THICK)  
  2M-4209 [ 6] SPACER (178 THICK)  
  2M-4210 [ 6] SPACER (182 THICK)  
  2M-4211 [ 6] SPACER (186 THICK)  
  2M-4212 [ 6] SPACER (190 THICK)  
  1S-0206 [ 6] SPRING  
  3S-9735 [ 6] LIFTER ASSEM.  
  4F-6024 [ 2] DOWEL  
  1S-1953 [ 1] BEARING  
    (PARTS OF HOUSING ASSEM. 5S9051)
  8H-9208 [ 1] DOWEL  
    (PART OF GEAR ASSEM. 5S5058)
  7M-5940 [ 1] PLATE  
  2H-3504 [ 1] LOCK  
  2S-7905 [ 1] PLUG  
    (PART OF HOUSING ASSEM. 5S9051)
  0L-0472 [ 1] BOLT  
  8H-9208 [ 1] DOWEL  
    (PART OF CAMSHAFT ASSEM 1M101)
  1S-0214 [ 1] SPRING  
  5S-5058 [ 1] GEAR ASSEM (68 TEETH)  
  2M-8604 [ 1] BEARING  
  2A-3746 [ 1] PLUG  
  3D-4603 [ 1] PLUG  
    (PARTS OF HOUSING ASSEM. 5S9051)
  5S-9051 [ 1] HOUSING ASSEM.  
  4M-0411 [ 6] BONNET  
  8H-9204 [ 6] WASHER  
  2M-4314 [ 6] BUSHING  
  1M-1077 [ 6] SEAL  
  9B-1363 [ 6] SPRING  
  9H-5746 [ 6] CHECK  
  9H-5797 [ 6] PLUNGER AND BARREL ASSEM  
  9H-5729 [ 6] WASHER  
  9H-1296 [ 1] BEARING  
    (PART OF HOUSING ASSEM 5S9051)
  1S-7436 [ 1] RACK  
  1M-0690 [ 1] SLEEVE  
    (PART OF 1M 101 ASSEM)
  4M-1474 [ 3] PIN  
  9H-1284 [ 1] BEARING  
    (PARTS OF HOUSING ASSEM 5S9051)
  1M-0101 [ 1] CAMSHAFT ASSEM  
  1M-1226 [ 1] BEARING  
    (PART OF HOUSING ASSEM 5S9051)
 

#UEG0234S0078
 

5S-9076: FUEL PUMP HOUSING GROUP

5S9076 FUEL PUMP HOUSING GROUP--Type 2
Part of Fuel Pump Housing and Governor shown on Page 31
c112420 UEG0234S
5S9076 FUEL PUMP HOUSING GROUP Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-9735 [ 6] LIFTER ASSEM.  
2. 9H-5797 [ 6] PLUNGER AND BARREL ASSEM.  
3. 9H-5729 WASHER  
4. 1M-3506 [ 6] RING  
5. 4M-0411 [ 6] BONNET  
6. 1M-1077 [ 6] SEAL  
7. 8H-9204 [ 6] WASHER  
8. 2M-4314 [ 6] BUSHING  
9. 9B-1363 [ 6] SPRING  
10. 9H-5746 [ 6] CHECK  
11. 2M-4208 [ 6] SPACER (.174" Thick)  
  2M-4209 [ 6] SPACER (.178" Thick)  
  2M-4210 [ 6] SPACER (.182" Thick)  
  2M-4211 [ 6] SPACER (.186" Thick)  
  2M-4212 [ 6] SPACER (.190" Thick)  
12. 1S-0206 [ 6] SPRING  
13. 5S-9051 [ 1] HOUSING ASSEM.  
14. 4M-1474 [ 3] PIN  
15. 1P-0232 [ 6] BALL  
16. 1P-0234 [ 6] DOWEL  
17. 1P-0231 [ 6] BALL  
18. 1P-0233 [ 6] DOWEL  
19. 9H-1296 [ 1] BEARING  
20. 9H-1284 [ 1] BEARING  
21. 1M-1226 [ 1] BEARING  
22. 2S-7905 [ 1] PLUG  
23. 3D-4603 [ 1] PLUG  
24. 2A-3746 [ 1] PLUG  
25. 1S-1953 [ 1] BEARING  
26. 2M-8604 [ 1] BEARING  
27. 4F-6024 [ 2] DOWEL  
28. 1M-0101 [ 1] CAMSHAFT ASSEM.  
29. 1M-0690 [ 1] SLEEVE  
30. 8H-9208 [ 1] DOWEL  
31. 5S-5058 [ 1] GEAR ASSEM. (66 Teeth)  
32. 8H-9208 [ 1] DOWEL  
33. 1S-7436 [ 1] RACK  
34. 1S-0214 [ 1] SPRING  
35. 7M-5940 [ 1] PLATE  
36. 2H-3504 [ 1] LOCK  
37. 0L-0472 [ 1] BOLT  
 

#UEG0234S0079
 

5S-7248: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (5S7248 N/S)
Serial No. 94N1 to 94N3673, 3676, 3678 and 94N3679 inclusive
c112421 UEG0234S
5S7248 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your D7F TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] LINE ASSEM. (No. 6)  
2. [1] LINE ASSEM. (No. 5)  
3. [1] LINE ASSEM. (No. 4)  
4. [1] CLAMP  
5. [2] DAMPER  
6. [8] BOLT  
  [8] LOCKWASHER  
7. [1] LINE ASSEM. (No. 3)  
8. [1] LINE ASSEM. (No. 2)  
9. [1] LINE ASSEM. (No. 1)  
10. [1] CLAMP  
11. [1] FITTING  
12. [1] TUBE (Drain)  
13. [1] CLIP  
14. [1] BOLT  
15. [6] LOCKWASHER  
16. [1] SEAL  
17. [2] BOLT  
18. [1] SEAL  
19. [1] BOLT (1.375" Long)  
  [1] BOLT (1.75" Long)  
20. [1] SEAL  
21. [1] BOLT  
22. [1] BRACKET  
23. [1] PLUG  
24. [1] SEAL  
25. [1] CLAMP  
26. [2] DAMPER  
27. [1] CLAMP  
28. [6] VALVE SERVICE GROUP  
29. [1] SEAL  
30. [1] SEAL  
31. [6] BODY  
32. [6] NUT  
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor And Decelerator Control<BR> (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Governor And Decelerator Control (9S7053 For D7 Tractor; Power Shift)<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Injection Pump Housing &amp; Governor
D7F ENGINE
Governor
D7F ENGINE
Fuel Injection Pump Housing
D7F ENGINE
Fuel Injection Pump Housing And Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Fuel Transfer Pump
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog D7F :

GOVERNOR GROUP
9S-6701 GOVERNOR GROUP
GOVERNOR GROUP
9S-6701 GOVERNOR GROUP
FUEL PUMP HOUSING AND GOVERNOR
9S-5979 FUEL PUMP HOUSING AND GOVERNOR
GOVERNOR TORQUE SPRING
8L-8682 GOVERNOR TORQUE SPRING
TORQUE CONTROL
1P-6039 TORQUE CONTROL
GOVERNOR TORQUE SPRING
8S-8682 GOVERNOR TORQUE SPRING
GOVERNOR AND DECELERATOR CONTROL
9S-7053 GOVERNOR AND DECELERATOR CONTROL
GOVERNOR AND DECELERATOR CONTROL
9S-5504 GOVERNOR AND DECELERATOR CONTROL
GOVERNOR GROUP
9S-6701 GOVERNOR GROUP
FUEL LINES GROUP
9S-5495 FUEL LINES GROUP
FUEL FILTER GROUP
5S-9666 FUEL FILTER GROUP
FUEL TRANSFER PUMP GROUP
7S-4430 FUEL TRANSFER PUMP GROUP
FUEL PRIMING PUMP GROUP
7S-1251 FUEL PRIMING PUMP GROUP
PUMP ASSEMBLY
9H-2256 PUMP ASSEMBLY
FUEL PUMP HOUSING GROUP
5S-9076 FUEL PUMP HOUSING GROUP
FUEL PUMP HOUSING GROUP
5S-9076 FUEL PUMP HOUSING GROUP

Truck sale:

CATERPILLAR D7F 1992
 
CATERPILLAR D7F 1992
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR D7F 1974
 
CATERPILLAR D7F 1974
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR D7F 1972
 
CATERPILLAR D7F 1972
- TRACK TYPE TRACTORS
FOLEY EQUIPMENT CO. (KS/MO)
1550 S. West Street - Wichita - Kansas
CAT D7F
USD $27,500 
CAT D7F

Powertrax Equipment Sales
1971 CAT D7F
USD $54,900 
1971 CAT D7F

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.