AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D348 VEHICULAR ENGINE 57K00001-UP BASIC ENGINE Caterpillar SIS



VEHICULAR ENGINE D348 VEHICULAR ENGINE 57K
 D348 VEHICULAR ENGINE 57K00001-UP UEG0242S D348 57K   (1968)

Parts group D348:

  For full view, you need register
BASIC ENGINE
ADAPTER GP-ENGINE TO XMSN
ADAPTER GROUP
8L-9794 ADAPTER GROUP
8L9794 ADAPTER GROUP
Serial No. 57K1 to 57K183 inclusive
POWERSHIFT TRANSMISSION ADAPTER GROUP
2N-1328 POWERSHIFT TRANSMISSION ADAPTER GROUP
2N1328 POWERSHIFT TRANSMISSION ADAPTER GROUP--Factory Installation
Serial No. 57K184-Up
AIR COMPRESSOR GP
AIR COMPRESSOR GROUP
8L-9419 AIR COMPRESSOR GROUP
8L9419 AIR COMPRESSOR GROUP
Serial No. 57K1 to 57K183 inclusive
2S2764 Air Compressor parts are shown on Page 101A
AIR COMPRESSOR GROUP
1N-9404 AIR COMPRESSOR GROUP
1N9404 AIR COMPRESSOR GROUP--Type 1
Serial No. 57K184 to 57K302 inclusive
2S2764 Air Compressor parts are shown on Page 101A
AIR COMPRESSOR GROUP
1N-9404 AIR COMPRESSOR GROUP
1N9404 AIR COMPRESSOR GROUP--Type 2
Serial No. 57K184 to 57K302 inclusive
2S2764 Air Compressor parts are shown on Page 101A
AIR COMPRESSOR GROUP
1N-9404 AIR COMPRESSOR GROUP
1N9404 AIR COMPRESSOR GROUP--Type 3
Effective with Serial No. 57K303
1P5013 Air Compressor parts are shown on Page 101B
AIR COMPRESSOR GROUP
1N-9404 AIR COMPRESSOR GROUP
1N9404 AIR COMPRESSOR GROUP--Type 4
Serial No. 57K303-Up
1P5013 Air Compressor parts are shown on Page 101B
AIR COMPRESSOR ASSEMBLY
2S-2764 AIR COMPRESSOR ASSEMBLY
2S2764 AIR COMPRESSOR ASSEMBLY
Serial No. 57K1 to 57K302 inclusive
Part of 8L9419 and 1N9404 Air Compressor Groups shown on Pages 99, 100 and 100A
AIR COMPRESSOR GP
1P-5013 AIR COMPRESSOR GP
1P5013 AIR COMPRESSOR GROUP
Effective with Serial No. 57K303
Part of 1N9404 Air Compressor Group shown on Page 100B
AIR COMPRESSOR GROUP
3N-4370 AIR COMPRESSOR GROUP
3N4370 AIR COMPRESSOR GROUP--Part 1 of 2--Type 1
Serial No. 57K609-Up
2N7635 Compressor parts are shown on Pages 101J & 101K
AIR COMPRESSOR GROUP
3N-4370 AIR COMPRESSOR GROUP
3N4370 AIR COMPRESSOR GROUP--Part 2 of 2--Type 1
Serial No. 57K609-Up
AIR COMPRESSOR GROUP
3N-4370 AIR COMPRESSOR GROUP
3N4370 AIR COMPRESSOR GROUP--Part 1 of 2--Type 2
Serial No. 57K609-Up
2N7635 Compressor parts are shown on Pages 101J & 101K
AIR COMPRESSOR GROUP
3N-4370 AIR COMPRESSOR GROUP
3N4370 AIR COMPRESSOR GROUP--Part 2 of 2--Type 2
Serial No. 57K609-Up
AIR COMPRESSOR GROUP
3N-4370 AIR COMPRESSOR GROUP
3N4370 AIR COMPRESSOR GROUP--Part 1 of 3--Type 3
Serial No. 57K609-Up
2N7635 Compressor parts are shown on Pages 101J and 101K
AIR COMPRESSOR GROUP
3N-4370 AIR COMPRESSOR GROUP
3N4370 AIR COMPRESSOR GROUP--Part 2 of 3--Type 3
Serial No. 57K609-Up
AIR COMPRESSOR GP
2N-7635 AIR COMPRESSOR GP
2N7635 AIR COMPRESSOR GROUP--Part 1 of 2
Serial No. 57K609-Up
Part of 3N4370 Air Compressor Group shown on Pages 101C, 101E and 101G
AIR COMPRESSOR GP
2N-7635 AIR COMPRESSOR GP
2N7635 AIR COMPRESSOR GROUP--Part 2 of 2
Serial No. 57K609-Up
Part of 3N4370 Air Compressor Group shown on Pages 101C, 101E and 101G
BELT TIGHTENER GP
BELT TIGHTENER GROUP
3N-0569 BELT TIGHTENER GROUP
3N569 BELT TIGHTENER GROUP--Type 1
Part of 7N982 and 3N867 Fan Drive Arrangements listed on Pages 88-4 & 88A
BELT TIGHTENER GROUP
3N-0569 BELT TIGHTENER GROUP
3N569 BELT TIGHTENER GROUP--Type 2
Part of 7N982 and 3N867 Fan Drive Arrangements listed on Pages 88-4 & 88A
BELT TIGHTENER GROUP
2N-5830 BELT TIGHTENER GROUP
2N5830 BELT TIGHTENER GROUP--Type 1
Part of 2N5930 Fan Drive Arrangement shown on Page 88A
BELT TIGHTENER GROUP
2N-5830 BELT TIGHTENER GROUP
2N5830 BELT TIGHTENER GROUP--Type 2
Part of 2N5930 Fan Drive Arrangement shown on Page 88A
CAMSHAFT GP
CAMSHAFT
3S-3986 CAMSHAFT
CAMSHAFT (3S3986 N/S)--Part 1 of 2
Serial No. 57K1 to 57K183 inclusive
CAMSHAFT
3S-3986 CAMSHAFT
CAMSHAFT--Part 2 of 2
Serial No. 57K1 to 57K183 inclusive
CAMSHAFT
2N-0487 CAMSHAFT
CAMSHAFT (2N487 N/S)--Part 1 of 2
Serial No. 57K184 to 57K342 inclusive
CAMSHAFT
2N-0487 CAMSHAFT
CAMSHAFT (2N487 N/S)--Part 2 of 2
Serial No. 57K184 to 57K342 inclusive
CAMSHAFT
2N-0487 CAMSHAFT
CAMSHAFT (2N487 N/S)--Part 1 of 2
Serial No. 57K343 to 57K366 inclusive
CAMSHAFT
2N-0487 CAMSHAFT
CAMSHAFT (2N487 N/S)--Part 2
Serial No. 57K343 to 57K366 inclusive
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 1
Serial No. 57K367 to 57K920 inclusive
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 2
Serial No. 57K367 to 57K920 inclusive
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 1
Serial No. 57K921 to 57K1112 inclusive
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 2
Serial No. 57K921 to 57K1112 inclusive
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 1
Serial No. 57K1113 to 57K1128 inclusive
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 2
Serial No. 57K1113 to 57K1128 inclusive
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 1
Serial No. 57K1129 to 57K1163 inclusive
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 2
Serial No. 57K1129 to 57K1163 inclusive
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 1
Serial No. 57K1164-Up
CAMSHAFT GROUP
2N-0487 CAMSHAFT GROUP
2N487 CAMSHAFT GROUP--Part 2 of 2
Serial No. 57K1164-Up
CRANKSHAFT GP
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT
Serial No. 57K1 to 57K183 inclusive
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
CRANKSHAFT (1N9169 N/S)
Serial No. 57K184 to 57K524 inclusive
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
1N9169 CRANKSHAFT GROUP
Serial No. 57K525 to 57K932 inclusive
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
1N9169 CRANKSHAFT GROUP
Serial No. 57K933 to 57K1116 inclusive
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
1N9169 CRANKSHAFT GROUP
Serial No. 57K1117 to 57K1209 inclusive
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
1N9169 CRANKSHAFT GROUP
Serial No. 57K1210-Up
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View--Part 1 of 3
Serial No. 57K1 to 57K183 inclusive
Cylinder Block Assembly parts are shown on Page 32. See Page 36 for Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Front View--Part 2 of 3
Serial No. 57K1 to 57K183 inclusive. Note: 5S1262 Piston & Liner Group,
consisting of: 1--Piston Assembly, 1--Liner & 3--Seal, is available
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Rear View--Part 3 of 3
Serial No. 57K1 to 57K183 inclusive
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK AND COVERS (1N8600 N/S)--Front View--Part 1 of 3
Serial No. 57K184 to 57K389 inclusive. Note: 5S1262 Piston & Liner Group,
consisting of: 1--Piston Assembly, 1--Liner & 3--Seal, is available
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK AND COVERS (1N8600 N/S)--Rear View--Part 2 of 3
Serial No. 57K184 to 57K389 inclusive
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK AND COVERS (1N8600 N/S)--Side View--Part 3 of 3
Serial No. 57K184 to 57K389 inclusive
Cylinder Block Assembly parts are shown on Pages 32B and 32C. See Page 36 for Gasket Kit
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK AND COVERS (1N8600 N/S)--Front View--Part 1 of 3
Serial No. 57K390 to 57K394 inclusive. Note: 5S1262 Piston & Liner Group,
consisting of: 1--Piston Assembly, 1--Liner and 3--Seal, is available
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Front View--Part 1 of 3
Serial No. 57K1142 to 57K1163 inclusive
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Rear View--Part 2 of 3
Serial No. 57K1142 to 57K1163 inclusive
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 3 of 3
Serial No. 57K1142 to 57K1163 inclusive
6N7329 Cylinder Block parts are shown on Page 33
See Page 36 for Gasket Kits
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Front View--Part 1 of 3
Serial No. 57K1164 to 57K1206 inclusive
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Rear View--Part 2 of 3
Serial No. 57K1164 to 57K1206 inclusive
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 3 of 3
Serial No. 57K1164 to 57K1206 inclusive
6N7329 Cylinder Block parts are shown on Page 33
See Page 36 for Gasket Kits
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDERS BLOCK AND COVERS GROUP--Front View--Part 1 of 3
Serial No. 57K1207 to 57K1280 inclusive
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDERS BLOCK AND COVER GROUP--Rear View--Part 2 of 3
Serial No. 57K1207 to 57K1280 inclusive
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 3 of 3
Serial No. 57K1207 to 57K1280 inclusive
6N7329 Cylinder Block parts are shown on Page 33. See Page 36 for Gasket Kits
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Front View--Part 1 of 3
Serial No. 57K1281-Up
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Rear View--Part 2 of 3
Serial No. 57K1281-Up
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
1N8600 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 3 of 3
Serial No. 57K1281-Up. 6N7329 Cylinder Block parts are shown on Page 33
See Page 36 for Gasket Kits
CYLINDER BLOCK ASSEMBLY
1N-5519 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY (1N5519 N/S)--Type 1
Part of Cylinder Block and Covers shown on Page 26
Note: For Field Replacement order 8S8209 Service Block Group
CYLINDER BLOCK ASSEMBLY
1N-5519 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY (1N5519 N/S)--Type 2
Part of Cylinder Block & Covers shown on Page 26
Note: For Field Replacement order 8S8209 Service Block Group
CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY (8S6701 N/S)--Type 1
Serial No. 57K184 to 57K394 inclusive
Part of Cylinder Block and Covers shown on Page 30A and 30D
Note: For Field Replacement order 8S8209 Service Block Group
CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY (8S6701 N/S)--Type 2
Serial No. 57K184 to 57K394 inclusive. Part of Cylinder Block and Covers shown
on Pages 30A & 30D. Note: For Field Replacement order
8S8209 Service Block Group
CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY (8S6701 N/S)
Serial No. 57K395 to 57K509 inclusive. Part of Cylinder Block and Covers shown
on Page 31. Note: For Field Replacement order 1P6925 Block Assembly
plus 1--1P1732 Hardware Kit
CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY (8S6701 N/S)
Serial No. 57K510 to 57K649 inclusive. Part of Cylinder Block and Cover shown on Pages
31C, 31F, 31J, 31M and 31Q. Note: For Field Replacement order 1P6925 Block
Assembly plus 1--1P1732 Hardware Kit
CYLINDER BLOCK GROUP
4N-4093 CYLINDER BLOCK GROUP
4N4093 CYLINDER BLOCK GROUP
Serial No. 57K650 to 57K726 inclusive. Part of Cylinder Block and Covers shown on
Pages 31T and 31W. Only separate parts serviced. When complete Group is required
order 6N1556 Block Assembly plus 1P1732 Hardware Kit
CYLINDER BLOCK AS
6N-7329 CYLINDER BLOCK AS
6N7329 CYLINDER BLOCK ASSEMBLY
Serial No. 57K727-Up. Part of 1N8600 Cylinder Block & Covers Group
shown on Pages 31Z & 31-4
CYLINDER HEAD GP
CYLINDER HEAD GP
2S-0711 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (2S711 N/S)
Serial No. 57K1 to 57K394 inclusive
See Page 36 for Gasket Kits
CYLINDER HEAD GP
2S-0711 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (2S711 N/S)
Serial No. 57K395 to 57K399 inclusive
See Page 36 for Gasket Kits
CYLINDER HEAD GP
2S-0711 CYLINDER HEAD GP
2S711 CYLINDER HEAD AND VALVE MECHANISM GROUP
Serial No. 57K400 to 57K880 & 57K890 to 57K920 inclusive
See Page 36 for Gasket Kits
CYLINDER HEAD GP
2S-0711 CYLINDER HEAD GP
2S711 CYLINDER HEAD AND VALVE MECHANISM GROUP
Serial No. 57K921 to 57K1163 inclusive
See Page 36 for Gasket Kits
CYLINDER HEAD GP
7N-9551 CYLINDER HEAD GP
7N9551 CYLINDER HEAD GROUP
Serial No. 57K1164-Up
CYLINDER HEAD GP
6N-3832 CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM (6N3832 N/S)
Serial No. 57K881 to 57K889 inclusive
See Page 36 for Gasket Kits
DAMPER GP
DRIVE PULLEY AND DAMPER GROUP
2S-7221 DRIVE PULLEY AND DAMPER GROUP
2S7221 DRIVE PULLEY AND DAMPER GROUP
Serial No. 57K1 to 57K300 inclusive
DRIVE PULLEY AND DAMPER GROUP
2N-7221 DRIVE PULLEY AND DAMPER GROUP
2N7221 DRIVE PULLEY AND DAMPER GROUP
Serial No. 57K301 to 57K730 inclusive
DRIVE PULLEY AND DAMPER GROUP
2N-7221 DRIVE PULLEY AND DAMPER GROUP
2N7221 DRIVE PULLEY AND DAMPER GROUP
Serial No. 57K731 to 57K817 inclusive
DRIVE PULLEY AND DAMPER GROUP
2N-7221 DRIVE PULLEY AND DAMPER GROUP
2N7221 DRIVE PULLEY AND DAMPER GROUP
Serial No. 57K818 to 57K1109 inclusive
DRIVE PULLEY AND DAMPER GROUP
2N-7221 DRIVE PULLEY AND DAMPER GROUP
2N7221 DRIVE PULLEY AND DAMPER GROUP
Serial No. 57K1110-Up
DRIVE GP-AUXILIARY
AUXILIARY DRIVE GROUP
2N-6770 AUXILIARY DRIVE GROUP
2N6770 AUXILIARY DRIVE GROUP
Effective with Serial No. 57K376. Adapts to either front
or rear side of flywheel housing drive location
DRIVE GP-FAN
2N-5930 FAN DRIVE ARRANGEMENT
2N5930 FAN DRIVE ARRANGEMENT
Serial No. 57K184 to 57K300 inclusive
Only separate parts serviced. FOR ADJUSTMENT OF 18.5" TO 21.0"
CENTER DISTANCES BETWEEN FAN AND CRANKSHAFT
7N-0982 FAN DRIVE ARRANGEMENT
7N982 FAN DRIVE ARRANGEMENT--Type 1
Serial No. 57K1075-Up
AN ATTACHMENT
7N-0982 FAN DRIVE ARRANGEMENT
7N982 FAN DRIVE ARRANGEMENT--Type 2
Serial No. 57K1075-Up
AN ATTACHMENT
3N-0867 FAN DRIVE ARRANGEMENT
3N867 FAN DRIVE ARRANGEMENT--Factory Installation
Serial No. 57K301 to 57K817 inclusive
FOR ADJUSTMENT OF 18.5" TO 21.0" CENTER DISTANCES
BETWEEN FAN AND CRANKSHAFT
3N-0867 FAN DRIVE ARRANGEMENT
3N867 FAN DRIVE ARRANGEMENT--Factory Installation
Serial No. 57K818-Up
FOR ADJUSTMENT OF 18.5" TO 21.0" CENTER DISTANCES
BETWEEN FAN AND CRANKSHAFT
FAN DRIVE GROUP
3N-0570 FAN DRIVE GROUP
3N570 FAN DRIVE GROUP - Type 1
Part of 3N867 Fan Drive Arrangement listed on Page 88A
FAN DRIVE GROUP
3N-0570 FAN DRIVE GROUP
3N570 FAN DRIVE GROUP--Type 2
Part of 3N867 Fan Drive Arrangement listed on Page 88A
FAN SUPPORT GROUP
3N-0868 FAN SUPPORT GROUP
3N868 FAN SUPPORT GROUP--Type 1
Part of 7N982 and 3N867 Fan Drive Arrangements listed on Pages 88-4 & 88A
FAN SUPPORT GROUP
3N-0868 FAN SUPPORT GROUP
3N868 FAN SUPPORT GROUP--Type 2
Part of 7N982 and 3N867 Fan Drive Arrangements listed on Pages 88-4 and 88A
FAN SUPPORT GROUP
3N-0868 FAN SUPPORT GROUP
3N868 FAN SUPPORT GROUP--Type 3
Part of 7N982 and 3N867 Fan Drive Arrangements listed on Pages 88-4 & 88A
FAN SUPPORT GROUP
2N-5825 FAN SUPPORT GROUP
2N5825 FAN SUPPORT GROUP--Type 1
Part of 2N5930 Fan Drive Arrangement shown on Page 88A
FAN SUPPORT GROUP
2N-5825 FAN SUPPORT GROUP
2N5825 FAN SUPPORT GROUP--Type 2
Part of 2N5930 Fan Drive Arrangement shown on Page 88A
DRIVE GP-PUMP
HYDRAULIC PUMP DRIVE GROUP
2N-6957 HYDRAULIC PUMP DRIVE GROUP
2N6957 HYDRAULIC PUMP DRIVE GROUP
Effective with Serial No. 57K376
FLYWHEEL GP
FLYWHEEL GROUP
2N-1009 FLYWHEEL GROUP
2N1009 FLYWHEEL GROUP
Serial No. 57K184 to 57K351 inclusive
FLYWHEEL GROUP
2N-8468 FLYWHEEL GROUP
2N8468 FLYWHEEL GROUP
Serial No. 57K359 to 57K363, 57K365, 57K366 & 57K390 inclusive
Also available as an Attachment Serial No. 57K184 to 57K351 inclusive
FLYWHEEL GROUP
2N-8468 FLYWHEEL GROUP
2N8468 FLYWHEEL GROUP
Serial No. 57K352 to 57K358, 57K364, 57K367 to 57K389
and 57K391 to 57K1029 inclusive
FLYWHEEL GP
7N-0999 FLYWHEEL GP
7N999 FLYWHEEL GROUP
Serial No. 57K1030 to 57K1264 inclusive
FLYWHEEL GP
7N-0999 FLYWHEEL GP
7N999 FLYWHEEL GROUP
Serial No. 57K1265-Up
ADAPTER GP-FLYWHEEL HOUSING
7N-1100 ADAPTER GP-FLYWHEEL HOUSING
7N1100 FLYWHEEL HOUSING ADAPTER GROUP
Serial No. 57K1030-Up
FLYWHEEL WEIGHT GROUP
7N-1445 FLYWHEEL WEIGHT GROUP
7N1445 FLYWHEEL WEIGHT GROUP
Serial No. 57K1030-Up
FLYWHEEL GROUP
8L-8594 FLYWHEEL GROUP
8L8594 FLYWHEEL GROUP
Serial No. 57K1 to 57K183 inclusive
ADAPTER GROUP
8L-9794 ADAPTER GROUP
8L9794 ADAPTER GROUP
Serial No. 57K1 to 57K183 inclusive
POWERSHIFT TRANSMISSION ADAPTER GROUP
2N-1328 POWERSHIFT TRANSMISSION ADAPTER GROUP
2N1328 POWERSHIFT TRANSMISSION ADAPTER GROUP--Factory Installation
Serial No. 57K184-Up
GEAR GP
WATER PUMP, CAMSHAFT, FUEL PUMP & OIL PUMP IDLER GEARS
8L-8974 WATER PUMP, CAMSHAFT, FUEL PUMP & OIL PUMP IDLER GEARS
WATER PUMP, CAMSHAFT, FUEL PUMP & OIL PUMP IDLER GEARS (8L8974 N/S)
Serial No. 57K1 to 57K183 inclusive
WATER PUMP, CAMSHAFT, FUEL PUMP & OIL PUMP IDLER GEAR GROUP
1N-8596 WATER PUMP, CAMSHAFT, FUEL PUMP & OIL PUMP IDLER GEAR GROUP
1N8596 WATER PUMP, CAMSHAFT, FUEL PUMP &
& OIL PUMP IDLER GEAR GROUP
Serial No. 57K184 to 57K375 inclusive
WATER PUMP, CAMSHAFT, FUEL PUMP AND OIL PUMP IDLER GEAR GROUP
1N-8596 WATER PUMP, CAMSHAFT, FUEL PUMP AND OIL PUMP IDLER GEAR GROUP
1N8596 WATER PUMP, CAMSHAFT, FUEL PUMP AND
OIL PUMP IDLER GEAR GROUP
Serial No. 57K376 to 57K509 inclusive
WATER PUMP, CAMSHAFT, FUEL PUMP AND OIL PUMP IDLER GEARS
2N-6975 WATER PUMP, CAMSHAFT, FUEL PUMP AND OIL PUMP IDLER GEARS
WATER PUMP, CAMSHAFT, FUEL PUMP AND OIL PUMP IDLER GEARS (2N6975 N/S)
Serial No. 57K510 to 57K644 inclusive
WATER PUMP, CAMSHAFT, FUEL PUMP AND OIL PUMP IDLER GEAR GROUP
2N-6975 WATER PUMP, CAMSHAFT, FUEL PUMP AND OIL PUMP IDLER GEAR GROUP
2N6975 WATER PUMP, CAMSHAFT, FUEL PUMP AND
OIL PUMP IDLER GEAR GROUP
Serial No. 57K645 to 57K1286 inclusive
WATER PUMP, CAMSHAFT, FUEL PUMP AND OIL PUMP IDLER GEAR GROUP
2N-6975 WATER PUMP, CAMSHAFT, FUEL PUMP AND OIL PUMP IDLER GEAR GROUP
2N6975 WATER PUMP, CAMSHAFT, FUEL PUMP AND
OIL PUMP IDLER GEAR GROUP
Serial No. 57K1287-Up
HOUSING GP-FLYWHEEL
ADAPTER GROUP
8L-9794 ADAPTER GROUP
8L9794 ADAPTER GROUP
Serial No. 57K1 to 57K183 inclusive
POWERSHIFT TRANSMISSION ADAPTER GROUP
2N-1328 POWERSHIFT TRANSMISSION ADAPTER GROUP
2N1328 POWERSHIFT TRANSMISSION ADAPTER GROUP--Factory Installation
Serial No. 57K184-Up
PISTON & ROD GP
6N-1675 BEARING AND ROD KIT
6N1675 BEARING AND ROD KIT--Field Installation
Serial No. 57K172 to 57K682 inclusive. To convert a
complete engine to right and left hand connecting rods
CONNECTING ROD AND PISTON
2S-0708 CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON (2S708 N/S)--12 Required
Serial No. 57K1 to 57K183 inclusive
PISTON & ROD GP
4N-8952 PISTON & ROD GP
4N8952 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 57K683 to 57K1215 inclusive
PISTON & ROD GP
4N-8952 PISTON & ROD GP
4N8952 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 57K1216-Up
CONNECTING ROD AND PISTON GROUP
2S-0708 CONNECTING ROD AND PISTON GROUP
2S708 CONNECTING ROD AND PISTON GROUP--12 Required
Serial No. 57K184 to 57K682 inclusive
PULLEY GP
DRIVE PULLEY GROUP
2N-5926 DRIVE PULLEY GROUP
2N5926 DRIVE PULLEY GROUP
Part of 2N5930 Fan Drive Arrangement listed on Page 88A

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor Drive Gear
5.4" BORE, 60 V12 VEHICULAR ENGINE
Air Compressor And Hydraulic Pump Drive Gear
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Air Compressor
D348 VEHICULAR ENGINE
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
V-Belt Tension Chart
5.4" BORE, 60 V12 VEHICULAR ENGINE
Engine News
New Camshaft Housing Gasket Has Increased Resistance To High Temperature
1979/10/24
Reusability Of Camshaft Rollers And Roller Followers
1982/09/22
Higher Temperature Material Used In Camshaft Base Gasket
1985/11/01
New 8T2998 Lubricant Available
1986/03/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Specifications
Camshafts
5.4" BORE, 60 V12 VEHICULAR ENGINE
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Camshaft Housings
D348 VEHICULAR ENGINE
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Higher Temperature Material Used In Camshaft Base Gasket{1113,1120}
1985/10/28
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
New Camshaft Housing Gasket Has Increased Resistance To High Temperature{1113}
1979/10/15
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
FT1576 Puller Plate Used For Removal Of Crankshaft Gear; Drawings For FT1576 Puller Plate Can Be Used For Modification Of Existing Puller Plate
1981/01/21
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service
1982/08/25
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy
1977/01/28
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together
1977/11/30
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
5.4" BORE, 60 V12 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
5.4" BORE, 60 V12 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Crankshaft Main Bearings
D348 VEHICULAR ENGINE
Crankshaft Front Seal
D348 VEHICULAR ENGINE
Crankshaft Rear Seal
D348 VEHICULAR ENGINE
Crankshaft
D348 VEHICULAR ENGINE
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available{0374,1203,1202}
1981/02/02
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1982/07/19
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy{1203}
1977/01/31
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material{1230}
1977/08/22
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/10/10
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Grinder Burns On Crankshaft Sidewalls{1202}
1990/06/18
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods
1979/04/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material
1979/09/19
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again
1980/04/30
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available
1981/01/28
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Connecting Rod And Main Bearings Used
1983/11/30
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
New Cylinder Head And Spacer Plate Gaskets Prevent Oil Leakage Around Gear Pocket
1987/07/01
New Engine Cylinder Liner Available {1216}
1996/01/17
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy
1977/01/28
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material
1977/08/24
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy
1977/10/12
Reference Chart For Main And Connecting Rod Bearings
1977/11/30
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate
1978/10/18
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Service Letter-NACD
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block
5.4" BORE, 60 V12 VEHICULAR ENGINE
Cylinder Liner
5.4" BORE, 60 V12 VEHICULAR ENGINE
Cylinder Liner Projection
5.4" BORE, 60 V12 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Service Letter-China
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Service Letter-APD
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Disassembly and Assembly
Crankshaft Main Bearings
D348 VEHICULAR ENGINE
Piston Cooling Jets
D348 VEHICULAR ENGINE
Spacer Plates
D348 VEHICULAR ENGINE
Cylinder Liners
D348 VEHICULAR ENGINE
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available{0374,1203,1202}
1981/02/02
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy{1203}
1977/01/31
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/10/10
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
New Cylinder Head And Spacer Plate Gaskets Prevent Oil Leakage Around Gear Pocket{1101}
1987/07/06
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Engine News
New Exhaust Valve Has Improved Three-Piece Construction
1979/04/25
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
New Water Seals Used In Cylinder Head Groups
1983/08/17
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New Cylinder Head Gasket Helps Prevent Oil Leakage Around Gear Pocket
1984/10/24
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
New Precombustion Chamber Seal Available
1985/09/01
Torque Increase For Cylinder Head Bolts
1985/10/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Silicone Water Seal Available
1986/08/01
Silicone Water Seal Available
1987/01/01
New Precombustion Chamber Seal Available
1987/05/01
New Cylinder Head And Spacer Plate Gaskets Prevent Oil Leakage Around Gear Pocket
1987/07/01
How to Prevent Exhaust Valve Failures on D348 Engines
1989/11/01
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves
1990/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate
1978/10/18
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Australia
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-CFEL
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-CSARL
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Americas
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Specifications
Precombustion Chamber
5.4" BORE, 60 V12 VEHICULAR ENGINE
Valves
5.4" BORE, 60 V12 VEHICULAR ENGINE
Cylinder Head
5.4" BORE, 60 V12 VEHICULAR ENGINE
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Asia
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Disassembly and Assembly
Glow Plugs
D348 VEHICULAR ENGINE
Precombustion Chambers
D348 VEHICULAR ENGINE
Right Cylinder Head Assembly
D348 VEHICULAR ENGINE
Left Cylinder Head Assembly
D348 VEHICULAR ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Water Seals Used In Cylinder Head Groups{1115,1101}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Cylinder Head Gasket Helps Prevent Oil Leakage Around Gear Pocket{1101}
1984/10/29
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Precombustion Chamber Seal Available{1106,1100}
1985/09/02
Torque Increase For Cylinder Head Bolts{1101}
1985/09/30
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/08/18
Silicone Water Seal Available{1101}
1986/08/18
Silicone Water Seal Available{1101}
1986/12/15
Use Heli-Coils To Repair 5.4" Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
New Precombustion Chamber Seal Available{1100,1106}
1987/05/18
New Cylinder Head And Spacer Plate Gaskets Prevent Oil Leakage Around Gear Pocket{1101}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09
New Exhaust Valve Has Improved Three-Piece Construction{1105}
1979/04/09
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
How to Prevent Exhaust Valve Failures on D348 Engines{1105}
1989/10/23
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves {1105}
1990/05/28
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Engine News
New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks
1978/07/05
Specifications
Vibration Damper<BR> (5S3419 and 2S712)
5.4" BORE, 60 V12 VEHICULAR ENGINE
Vibration Damper<BR> (2N7221 and 4N4416)
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Vibration Damper And Pulley
D348 VEHICULAR ENGINE
Service Magazine
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks{1205}
1978/06/12
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Air Compressor And Hydraulic Pump Drive Gear
5.4" BORE, 60 V12 VEHICULAR ENGINE
Fan Drive For 992
5.4" BORE, 60 V12 VEHICULAR ENGINE
Fan Drive For D348, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE
V-Belt Tension Chart
5.4" BORE, 60 V12 VEHICULAR ENGINE
Service Magazine
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Filter Added To Drain Hole In Water Pumps{1361}
1985/11/18
Special Instruction
Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Special Instruction
Installation And Alignment Of General Electric GE-603K Generators, GTA-15 And GTA-18 Alternators{1156, 1603}
Installation And Alignment Of General Electric GE-603K Generators, GTA-15 And GTA-18 Alternators{1156, 1603}
Specifications
Flywheel
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing Bore
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Flywheel
D348 VEHICULAR ENGINE
Flywheel Housing
D348 VEHICULAR ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Method Of Piloting Power Generator To Engine Improved{1156,1157,4450}
1977/05/23
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Specifications
Timing Gears For 992
5.4" BORE, 60 V12 VEHICULAR ENGINE
Timing Gears For D348, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Front Timing Gear Cover
D348 VEHICULAR ENGINE
Front Timing Gears And Plate
D348 VEHICULAR ENGINE
Rear Timing Gears And Plate
D348 VEHICULAR ENGINE
Service Magazine
Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Specifications
Flywheel Housing
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing Bore
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Crankshaft Rear Seal
D348 VEHICULAR ENGINE
Flywheel Housing
D348 VEHICULAR ENGINE
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Method Of Piloting Power Generator To Engine Improved{1156,1157,4450}
1977/05/23
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Specifications
Timing Gears For D348, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Crankshaft Front Seal
D348 VEHICULAR ENGINE
Front Timing Gear Cover
D348 VEHICULAR ENGINE
Front Timing Gears And Plate
D348 VEHICULAR ENGINE
Rear Timing Gears And Plate
D348 VEHICULAR ENGINE
Service Magazine
Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13
Engine News
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods
1979/04/04
New Exhaust Valve Has Improved Three-Piece Construction
1979/04/25
New Oil Pump Has Improved Relief Valve For Better Pressure Control
1979/05/09
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material
1979/09/19
New Camshaft Housing Gasket Has Increased Resistance To High Temperature
1979/10/24
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again
1980/04/30
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings
1980/08/13
Corrected &quot;5.4&quot; 60&deg;V Main Bearing Selection Guide&quot; Is Now Available
1981/01/28
Use Correct Specifications To Check Piston Ring Gaps
1981/06/03
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Torque Increase For Cylinder Head Bolts
1985/10/01
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy
1977/01/28
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material
1977/08/24
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy
1977/10/12
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together
1977/11/30
Reference Chart For Main And Connecting Rod Bearings
1977/11/30
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate
1978/10/18
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets
1978/12/13
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Disassembly and Assembly
Crankshaft Front Seal
D348 VEHICULAR ENGINE
Crankshaft Rear Seal
D348 VEHICULAR ENGINE
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Be Sure To Cut The Center Gasket Even With Top Surface Of Oil Pan Sections To Prevent Oil Leakage{1302}
1980/12/15
New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}
1980/12/22
Corrected &quot;5.4&quot; 60&deg;V Main Bearing Selection Guide&quot; Is Now Available{0374,1203,1202}
1981/02/02
Do Not Use &quot;V&quot; Mark As Reference To Install Pistons With Keystone-Type Rings{1214,1215}
1981/12/07
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Usage Of Pistons With Rectangular Rings{1214,1215}
1984/01/09
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Filter Added To Drain Hole In Water Pumps{1361}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy{1203}
1977/01/31
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Change Is Made to Support Beam For Front Of Engine{0643}
1977/10/03
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/10/10
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks{1205}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
New Oil Pan Assembly Uses An O-Ring And Plug For A Better Seal{1302}
1979/03/05
New Oil Pump Has Improved Relief Valve For Better Pressure Control{1304}
1979/05/07
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
New Camshaft Housing Gasket Has Increased Resistance To High Temperature{1113}
1979/10/15
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Specifications
Engine Support For 992, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE
Service Magazine
Change Is Made to Support Beam For Front Of Engine{0643}
1977/10/03
Disassembly and Assembly
Oil Pan
D348 VEHICULAR ENGINE
Service Magazine
Be Sure To Cut The Center Gasket Even With Top Surface Of Oil Pan Sections To Prevent Oil Leakage{1302}
1980/12/15
New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}
1980/12/22
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Oil Pan Assembly Uses An O-Ring And Plug For A Better Seal{1302}
1979/03/05
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods
1979/04/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material
1979/09/19
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again
1980/04/30
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings
1980/08/13
Use Correct Specifications To Check Piston Ring Gaps
1981/06/03
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Piston For Rectangular Rings Available Again
1983/07/06
New Connecting Rod And Main Bearings Used
1983/11/30
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
Stronger Material Used In Undersize Connecting Rod Bearings
1977/04/22
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material
1977/08/24
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy
1977/10/12
Reference Chart For Main And Connecting Rod Bearings
1977/11/30
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets
1978/12/13
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Installation Of 4N9001 And 4N9002 Connecting Rods{1218}
Installation Of 4N9001 And 4N9002 Connecting Rods{1218}
Installation Of Oversize Connecting Rod Bearings{1219}
Installation Of Oversize Connecting Rod Bearings{1219}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
pistons and rings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Connecting Rods
5.4" BORE, 60 V12 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
5.4" BORE, 60 V12 VEHICULAR ENGINE
Connecting Rod Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Disassembly and Assembly
Connecting Rod Bearings
D348 VEHICULAR ENGINE
Pistons
D348 VEHICULAR ENGINE
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04
Use Correct Specifications To Check Piston Ring Gaps{1215}
1981/05/25
Do Not Use &quot;V&quot; Mark As Reference To Install Pistons With Keystone-Type Rings{1214,1215}
1981/12/07
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Usage Of Pistons With Rectangular Rings{1214,1215}
1984/01/09
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Stronger Material Used In Undersize Connecting Rod Bearings{1219}
1977/04/18
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material{1230}
1977/08/22
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/10/10
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks
1978/07/05
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks{1205}
1978/06/12
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies
1987/01/01
Do Not Use Heli-Coils&reg; To Repair Rocker Arm Assemblies On 5.4&quot; Bore Engines
1989/01/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Rocker Arms
5.4" BORE, 60 V12 VEHICULAR ENGINE
Service Letter-China
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Disassembly and Assembly
Valve Covers,
D348 VEHICULAR ENGINE
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Higher Temperature Material Used In Camshaft Base Gasket{1113,1120}
1985/10/28
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23
Do Not Use Heli-Coils&reg; To Repair Rocker Arm Assemblies On 5.4&quot; Bore Engines {1123}
1988/12/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Alternator Groups With Slower Drive RPM Used Again{1205,1405}
1977/04/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

1972 CAT D348
USD $13,500 
1972 CAT D348

Hawthorne Cat
San Marcos, California
 
 
CAT D348

EURO AUCTIONS
United Kingdom
 
 
CAT D348

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.