AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N4093 CYLINDER BLOCK GROUP Serial No. 57K650 to 57K726 inclusive. Part of Cylinder Block and Covers shown on Pages 31T and 31W. Only separate parts serviced. When complete Group is required order 6N1556 Block Assembly plus 1P1732 Hardware Kit D348


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS

VEHICULAR ENGINE D348 VEHICULAR ENGINE 57K
 D348 VEHICULAR ENGINE 57K00001-UP UEG0242S D348 57K   (1968)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK GROUP
4N-4093 CYLINDER BLOCK GROUP
CYLINDER BLOCK AS
6N-7329 CYLINDER BLOCK AS
 

#UEG0242S0110
 

4N-4093: CYLINDER BLOCK GROUP

4N4093 CYLINDER BLOCK GROUP
Serial No. 57K650 to 57K726 inclusive. Part of Cylinder Block and Covers shown on
Pages 31T and 31W. Only separate parts serviced. When complete Group is required
order 6N1556 Block Assembly plus 1P1732 Hardware Kit
c149436 UEG0242S
4N4093 CYLINDER BLOCK GROUP Parts scheme
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-4279 [2] PLUG  
2. 3S-4507 [1] FERRULE  
4. 9S-4086 [4] DOWEL  
5. 9S-4087 [2] DOWEL  
6. 3J-5390 [2] PLUG  
7. 5M-6213 [1] PLUG  
8. 4B-5387 [1] PLUG  
10. 2S-4241 [1] PLUG  
11. 2A-3576 [5] DOWEL  
12. 2S-4129 [1] SHAFT  
13. 0L-1021 [1] PLUG  
14. 1B-5170 [2] PLUG  
15. 4N-3315 [1] SHAFT (idler)  
16. 2S-5663 [1] TUBE  
17. 9S-9752 [28] STUD  
  1A-5666 [28] NUT  
  4D-6419 [28] WASHER  
18. 1S-0521 [2] FERRULE  
19. 5S-5188 [5] CAP ASSEM. (Front & Intermediate)  
20. 4F-2609 [1] DOWEL  
21. 9S-1218 [2] CAP (rear & center)  
22. 5B-5812 [1] DOWEL  
23. 2H-1190 [12] DOWEL  
 

#UEG0242S0111
 

6N-7329: CYLINDER BLOCK AS

6N7329 CYLINDER BLOCK ASSEMBLY
Serial No. 57K727-Up. Part of 1N8600 Cylinder Block & Covers Group
shown on Pages 31Z & 31-4
c207297 UEG0242S
6N7329 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-4279 [ 2] PLUG  
2. 5B-5812 [ 2] DOWEL  
3. 0L-0659 [ 2] STUD  
4. 9S-4086 [ 4] DOWEL  
5. 9S-4087 [ 2] DOWEL  
6. 3J-5390 [ 2] PLUG  
7. 5M-6213 [ 1] PLUG  
8. 4B-5387 [ 1] PLUG  
9. 2H-1190 [ 12] DOWEL  
10. 2A-3576 [ 4] DOWEL  
11. 1B-5170 [ 2] PLUG  
12. 5S-5188 [ 5] CAP ASSEM. (front & intermediate)  
    (Includes)
13. 4F-2609 [ 1] DOWEL  
14. 9S-1218 [ 2] CAP (rear & center)  
15. 4N-3315 [ 1] SHAFT (idler)  
16. 2S-5663 [ 1] TUBE  
17. 9S-9752 [ 28] STUD  
  1A-5666 [ 28] NUT  
  4D-6419 [ 28] WASHER  
 

#UEG0242S0112
 

CRANKSHAFT

CRANKSHAFT
Serial No. 57K1 to 57K183 inclusive
c127338 UEG0242S
None CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-5141 [1] SEAL  
2. 1S-2665 [1] GASKET  
3. 9S-0684 [7] BEARING  
4. 1N-8408 [1] CRANKSHAFT ASSEM.  
5. 3R-4256 [1] GEAR (50 Teeth)  
6. 4B-3365 [1] DOWEL  
7. 4F-5695 [6] PLUG  
  4M-9480 [6] RING  
8. 5B-5821 [1] DOWEL  
9. 2S-4071 [1] SEAL  
    (Parts of 1N8408 Crankshaft Assem.)
10. 0S-1591 [8] BOLT  
11. 2S-4447 [4] LOCK  
12. 2S-4018 [1] SEAL  
13. 5S-0508 [1] GEAR (50 Teeth)  
14. 9S-1162 [2] BEARING  
15. 0S-1594 [12] BOLT  
16. 1S-2666 [6] LOCK  
17. 8S-5137 [1] BAFFLE  
18. 8S-5138 [1] SLEEVE  
 

#UEG0242S0113
 

1N-9169: CRANKSHAFT GP

CRANKSHAFT (1N9169 N/S)
Serial No. 57K184 to 57K524 inclusive
c150532 UEG0242S
1N9169 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-5141 [1] SEAL  
2. 1S-2665 [1] GASKET  
3. 9S-0684 [7] BEARING  
4. 9S-2003 [1] CRANKSHAFT ASSEM.  
5. 2P-4563 C [1] GEAR (50 Teeth)  
6. 4B-3365 [1] DOWEL  
7. 3N-2110 C [6] PLUG  
  4M-9480 [6] RING  
8. 5B-5821 [1] DOWEL  
9. 2S-4071 [1] SEAL  
    (Parts of 9S2003 Crankshaft Assem.)
10. 0S-1591 [8] BOLT  
11. 2S-4447 [4] LOCK  
12. 2S-4018 [1] SEAL  
13. 5S-0508 [1] GEAR (50 Teeth)  
14. 9S-1162 [2] BEARING  
15. 0S-1594 [12] BOLT  
16. 1S-2666 [6] LOCK  
17. 8S-5137 [1] BAFFLE  
18. 8S-5138 [1] SLEEVE  
  C   INDICATES CHANGE
 

#UEG0242S0114
 

1N-9169: CRANKSHAFT GP

1N9169 CRANKSHAFT GROUP
Serial No. 57K525 to 57K932 inclusive
c150533 UEG0242S
1N9169 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-5141 [1] SEAL  
2. 1S-2665 [1] GASKET  
3. 6N-1168 C [7] BEARING  
4. 3N-4438 C [1] CRANKSHAFT ASSEM.  
5. 2P-4563 [1] GEAR (50 Teeth)  
6. 4B-3365 [1] DOWEL  
7. 4F-5695 [6] PLUG  
  4M-9480 [6] RING  
8. 5B-5821 [1] DOWEL  
9. 2S-4071 [1] SEAL  
    (Parts of 9S2003 Crankshaft Assem.)
10. 3B-1915 C [8] BOLT  
11. 2S-4447 [4] LOCK  
12. 1P-7355 C [1] SEAL  
13. 5S-0508 [1] GEAR (50 Teeth)  
14. 9S-1162 [2] BEARING  
15. 0S-1594 [12] BOLT  
16. 1S-2666 [6] LOCK  
17. 8S-5137 [1] BAFFLE  
18. 8S-5138 [1] SLEEVE  
  C   INDICATES CHANGE
 

#UEG0242S0115
 

1N-9169: CRANKSHAFT GP

1N9169 CRANKSHAFT GROUP
Serial No. 57K933 to 57K1116 inclusive
c163667 UEG0242S
1N9169 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-5141 [1] SEAL  
2. 1S-2665 [1] GASKET  
3. 6N-6956 C [7] BEARING  
4. 3N-4438 [1] CRANKSHAFT ASSEM.  
    (Includes)
5. 2P-4563 [1] GEAR (50 teeth)  
6. 4B-3365 [1] DOWEL  
7. 4F-5695 [6] PLUG  
  4M-9480 [6] RING  
8. 5B-5821 [1] DOWEL  
9. 2S-4071 [1] SEAL  
10. 3B-1915 [8] BOLT  
11. 2S-4447 [4] LOCK  
12. 2P-3846 C [1] SEAL  
13. 5S-0508 [1] GEAR (50 Teeth)  
14. 9S-1162 [2] BEARING  
15. 0S-1594 [12] BOLT  
16. 1S-2666 [6] LOCK  
17. 8S-5137 [1] BAFFLE  
18. 8S-5138 [1] SLEEVE  
19. 2P-3847 C [1] SLEEVE  
  C   INDICATES CHANGE
 

#UEG0242S0116
 

1N-9169: CRANKSHAFT GP

1N9169 CRANKSHAFT GROUP
Serial No. 57K1117 to 57K1209 inclusive
c166484 UEG0242S
1N9169 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-5141 [1] SEAL  
2. 1S-2665 [1] GASKET  
3. 6N-8757 C [7] BEARING  
4. 6N-7899 C [1] CRANKSHAFT ASSEM.  
    (Includes)
5. 2P-4563 [1] GEAR (50 teeth)  
6. 4B-3365 [1] DOWEL  
7. 9F-2247 [6] PLUG  
8. 5B-5821 [1] DOWEL  
9. 2S-4071 [1] SEAL  
10. 3B-1915 [8] BOLT  
11. 2S-4447 [4] LOCK  
12. 2P-3846 [1] SEAL  
13. 5S-0508 [1] GEAR (50 Teeth)  
14. 9S-1162 [2] BEARING  
15. 0S-1594 [12] BOLT  
16. 1S-2666 [6] LOCK  
17. 8S-5137 [1] BAFFLE  
18. 8S-5138 [1] SLEEVE  
19. 2P-3847 [1] SLEEVE  
  C   INDICATES CHANGE
 

#UEG0242S0117
 

1N-9169: CRANKSHAFT GP

1N9169 CRANKSHAFT GROUP
Serial No. 57K1210-Up
c173629 UEG0242S
1N9169 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-5141 [1] SEAL  
2. 1S-2665 [1] GASKET  
3. 8N-5622 C [7] BEARING  
4. 6N-7899 [1] CRANKSHAFT ASSEM.  
    (Includes)
5. 2P-4563 [1] GEAR (50 teeth)  
6. 4B-3365 [1] DOWEL  
7. 9F-2247 [6] PLUG  
8. 5B-5821 [1] DOWEL  
9. 2S-4071 [1] SEAL  
10. 3B-1915 [8] BOLT  
11. 2S-4447 [4] LOCK  
12. 2P-3846 [1] SEAL  
13. 5S-0508 [1] GEAR (50 Teeth)  
14. 9S-1162 [2] BEARING  
15. 0S-1594 [12] BOLT  
16. 1S-2666 [6] LOCK  
17. 8S-5137 [1] BAFFLE  
18. 8S-5138 [1] SLEEVE  
19. 2P-3847 [1] SLEEVE  
  C   INDICATES CHANGE
 

#UEG0242S0118
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
UEG0242S0118 UEG0242S
None CRANKSHAFT BEARING REPLACEMENTS Parts scheme
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UEG0242S0119
 

GASKET KITS

GASKET KITS
UEG0242S0119 UEG0242S
  For full view, you need register

Parts for your D348 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-6668 DIESEL ENGINE OVERHAUL  
    SERIAL NO. 57K1 TO 57K183 INCLUSIVE
  5P-4053 DIESEL ENGINE OVERHAUL  
    SERIAL NO. 57K184 TO 57K399 INCLUSIVE
  5P-4052 DIESEL ENGINE OVERHAUL  
    SERIAL NO. 57K400--UP
  9S-6669 VALVE GRINDING  
    SERIAL NO. 57K1 TO 57K183 INCLUSIVE
  5P-4051 VALVE GRINDING  
    SERIAL NO. 57K184--UP
  7S-1222 WATER PUMP  
  1P-6303 AFTERCOOLER WATER PUMP  
    SERIAL NO. 57K184--UP
 

Information:

Engine News
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods
1979/04/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material
1979/09/19
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again
1980/04/30
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available
1981/01/28
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Connecting Rod And Main Bearings Used
1983/11/30
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
New Cylinder Head And Spacer Plate Gaskets Prevent Oil Leakage Around Gear Pocket
1987/07/01
New Engine Cylinder Liner Available {1216}
1996/01/17
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy
1977/01/28
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material
1977/08/24
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy
1977/10/12
Reference Chart For Main And Connecting Rod Bearings
1977/11/30
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate
1978/10/18
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Service Letter-NACD
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block
5.4" BORE, 60 V12 VEHICULAR ENGINE
Cylinder Liner
5.4" BORE, 60 V12 VEHICULAR ENGINE
Cylinder Liner Projection
5.4" BORE, 60 V12 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Service Letter-China
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Service Letter-APD
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Disassembly and Assembly
Crankshaft Main Bearings
D348 VEHICULAR ENGINE
Piston Cooling Jets
D348 VEHICULAR ENGINE
Spacer Plates
D348 VEHICULAR ENGINE
Cylinder Liners
D348 VEHICULAR ENGINE
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available{0374,1203,1202}
1981/02/02
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy{1203}
1977/01/31
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/10/10
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
New Cylinder Head And Spacer Plate Gaskets Prevent Oil Leakage Around Gear Pocket{1101}
1987/07/06
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Caterpillar Parts SIS Catalog D348 :

CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
8S-6701 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
1N-5519 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
1N-5519 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
1N-8600 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK AS
6N-7329 CYLINDER BLOCK AS
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
CRANKSHAFT GP
1N-9169 CRANKSHAFT GP
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS

Truck sale:

1972 CAT D348
USD $13,500 
1972 CAT D348

Hawthorne Cat
San Marcos, California
 
 
CAT D348

EURO AUCTIONS
United Kingdom
 
 
CAT D348

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.