AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

773 TRUCK 63G00001-00339 (MACHINE) POWER TRAIN Caterpillar SIS



TRUCK 773 TRUCK 63G
 773 TRUCK 63G00001-00339 (MACHINE) UEG0245S 773 63G   (1970)

Parts group 773:

  For full view, you need register
POWER TRAIN
AXLE GP
REAR AXLE HOUSING
7D-2920 REAR AXLE HOUSING
REAR AXLE HOUSING (7D2920 N/S)
CONTROL GP-TRANSMISSION HYD
THROTTLE PRESSURE AND CONVERTER HOLD VALVE
3S-0118 THROTTLE PRESSURE AND CONVERTER HOLD VALVE
3S118 THROTTLE PRESSURE AND CONVERTER HOLD VALVE
Serial No. 63G1 to 114, 116, 117, 119 and 63G122 inclusive
Part of Torque Divider Hydraulic Control shown on Page 90
THROTTLE PRESSURE AND CONVERTER HOLD VALVE
3S-0118 THROTTLE PRESSURE AND CONVERTER HOLD VALVE
3S118 THROTTLE PRESSURE AND CONVERTER HOLD VALVE
Serial No. 63G115, 118, 120, 121 and 63G123-Up
Part of Torque Divider Hydraulic Control shown on Page 90
TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL--Top View--Part 1 of 2
Part of 8S9145 Range Transmission Arrangement shown on Page 103
3S6890 Selector Valve and 8S698 Control Valve parts are shown on Pages 110 and 112
TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL--End View--Part 2 of 2
Part of 8S9145 Range Transmission Arrangement shown on Page 103
8S3330, 8S3333 Valves, 8S683 Shift Cylinder and 8S647 Switch parts are shown on Pages 110, 111 & 113
SAFETY RESET AND CONVERTER HOLD VALVE GROUP
8S-3330 SAFETY RESET AND CONVERTER HOLD VALVE GROUP
8S3330 SAFETY RESET AND CONVERTER HOLD VALVE GROUP
Part of Transmission Hydraulic Control shown on Page 109
LUBRICATION RELIEF VALVE
8S-0505 LUBRICATION RELIEF VALVE
8S505 LUBRICATION RELIEF VALVE
RELIEF VALVE GROUP
7J-8988 RELIEF VALVE GROUP
7J8988 RELIEF VALVE GROUP--Type 1
Part of 7J8987 Control Valve Group
RELIEF VALVE GROUP
5J-2875 RELIEF VALVE GROUP
5J2875 RELIEF VALVE GROUP--Brake Cooling
Part of 7J82 Tank & Valve Group shown on Page 157
RELIEF VALVE GROUP
7J-8988 RELIEF VALVE GROUP
7J8988 RELIEF VALVE GROUP--Type 2
Part of 7J8987 Control Valve Group shown on Page 158
CYLINDER GP
CYLINDER GP-SHIFT
8S-0683 CYLINDER GP-SHIFT
8S683 SHIFT CYLINDER GROUP
Part of Transmission Hydraulic Control shown on Page 109
DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GROUP
7D-5270 DIFFERENTIAL GROUP
7D5270 DIFFERENTIAL GROUP
Part of 7D2830 Differential and Bevel Gear Group shown on Pages 122A & 123
DIFFERENTIAL AND BEVEL GEAR
7D-2830 DIFFERENTIAL AND BEVEL GEAR
DIFFERENTIAL AND BEVEL GEAR (7D2830 N/S)--Part 1--Type 1
DIFFERENTIAL AND BEVEL GEAR
7D-2830 DIFFERENTIAL AND BEVEL GEAR
DIFFERENTIAL AND BEVEL GEAR (7D2830 N/S)--Part 2--Type 1
7D5270 Differential Group parts are shown on Page 117
DIFFERENTIAL AND BEVEL GEAR
7D-2830 DIFFERENTIAL AND BEVEL GEAR
DIFFERENTIAL AND BEVEL GEAR (7D2830 N/S)--Part 1--Type 2
DIFFERENTIAL AND BEVEL GEAR
7D-2830 DIFFERENTIAL AND BEVEL GEAR
DIFFERENTIAL AND BEVEL GEAR (7D2830 N/S)--Part 2--Type 2
7D5270 Differential Group parts are shown on Page 117
DIFFERENTIAL GP
7D-6973 DIFFERENTIAL GP
7D6973 DIFFERENTIAL ASSEMBLY
GEAR GP
TRANSFER GEAR
TRANSFER GEAR
TRANSFER GEAR--Input
Part of 8S9145 Range Transmission Arrangement shown on Page 102
GOVERNOR GP
PUMP-DRIVE & GOVERNOR GP
8S-6460 PUMP-DRIVE & GOVERNOR GP
8S6460 FUEL PUMP HOUSING, DRIVE AND GOVERNOR GROUP
Serial No. 63G1 to 152, 154, 156, 157, 159, 162 to 164, 169, 171, 186, 187, 191, 200 and 63G249 to 63G252 inclusive
8S6420 Governor, 2S9519 Rack Stop, 4S9498 Drive and 8S206 Fuel Pump Housing parts are shown on
Pages 46, 47, 48, 48C-2, 48C-3, 48C-4, 49, 54, 56 and 57
PUMP-DRIVE & GOVERNOR GP
8S-6460 PUMP-DRIVE & GOVERNOR GP
8S6460 FUEL PUMP HOUSING, DRIVE AND GOVERNOR GROUP
Serial No. 63G153, 155, 158, 160, 161, 165 to 168, 170, 172 to 185, 188 to 190, 192 to 199, 201 to
248 and 63G253-Up. 8S6420 Governor, 4S9498 Drive and 8S206 Fuel Pump Housing parts are shown on
Pages 46, 47, 48, 48C-2, 48C-3, 48C-4, 54, 56 and 57
LINES GP-TRANSMISSION OIL
TRANSMISSION OIL LINES
7D-4810 TRANSMISSION OIL LINES
TRANSMISSION OIL LINES (7D4810 N/S)--Part 1 of 4
Serial No. 63G1 to 63G164 inclusive
TRANSMISSION OIL LINES
7D-4810 TRANSMISSION OIL LINES
TRANSMISSION OIL LINES (7D4810 N/S)--Part 2 of 4
Serial No. 63G1 to 63G164 inclusive
TRANSMISSION OIL LINES
7D-4810 TRANSMISSION OIL LINES
TRANSMISSION OIL LINES (7D4810 N/S)--Part 3 of 4
Serial No. 63G1 to 63G164 inclusive
TRANSMISSION OIL LINES
7D-4810 TRANSMISSION OIL LINES
TRANSMISSION OIL LINES (7D4810 N/S)--Part 4 of 4
Serial No. 63G1 to 63G164 inclusive
TRANSMISSION OIL LINES
7D-4810 TRANSMISSION OIL LINES
TRANSMISSION OIL LINES (7D4810 N/S)--Part 1 of 4
Serial No. 63G165-Up
TRANSMISSION OIL LINES
7D-4810 TRANSMISSION OIL LINES
TRANSMISSION OIL LINES (7D4810 N/S)--Part 2 of 4
Serial No. 63G165-Up
TRANSMISSION OIL LINES
7D-4810 TRANSMISSION OIL LINES
TRANSMISSION OIL LINES (7D4810 N/S)--Part 3 of 4
Serial No. 63G165-Up
TRANSMISSION OIL LINES
7D-4810 TRANSMISSION OIL LINES
TRANSMISSION OIL LINES (7D4810 N/S)--Part 4 of 4
Serial No. 63G165-Up
PUMP GP
TRANSMISSION AND SCAVENGE PUMP GROUP
9S-4383 TRANSMISSION AND SCAVENGE PUMP GROUP
9S4383 TRANSMISSION AND SCAVENGE PUMP GROUP--(7D4410 N/S)
SHAFT GP
DRIVE SHAFT
7D-3000 DRIVE SHAFT
DRIVE SHAFT (7D3000 N/S)
Serial No. 63G1 to 63G300 inclusive
7D5004 Universal Joint parts are shown on Page 100
DRIVE SHAFT
7D-3000 DRIVE SHAFT
DRIVE SHAFT (7D3000 N/S)
Serial No. 63G301 to 63G311 inclusive
8D536 Universal Joint parts are shown on Page 100A
DRIVE SHAFT GROUP
7D-3000 DRIVE SHAFT GROUP
7D3000 DRIVE SHAFT GROUP--Type 1
Serial No. 63G312-Up
8D536 Universal Joint parts are shown on Page 100A
DRIVE SHAFT GROUP
7D-3000 DRIVE SHAFT GROUP
7D3000 DRIVE SHAFT GROUP--Type 2
Serial No. 63G312-Up
8D536 Universal Joint parts are shown on Page 100A
UNIVERSAL JOINT ASSEMBLY
7D-5004 UNIVERSAL JOINT ASSEMBLY
7D5004 UNIVERSAL JOINT ASSEMBLY
Serial No. 63G1 to 63G300 inclusive
Part of Drive Shaft shown on Page 98A
DRIVE SHAFT GUARD
7D-3480 DRIVE SHAFT GUARD
DRIVE SHAFT GUARD (7D3480 N/S)
Serial No. 63G1 to 63G137 inclusive
UNIVERSAL JOINT GP
8D-0536 UNIVERSAL JOINT GP
8D536 UNIVERSAL JOINT ASSEMBLY
Serial No. 63G301-Up
Part of 7D3000 Drive Shaft Group shown on Pages 98B, 99 & 99B
DRIVE SHAFT GUARD GROUP
7D-3480 DRIVE SHAFT GUARD GROUP
7D3480 DRIVE SHAFT GUARD GROUP
Serial No. 63G138-Up
DOUBLE UNIVERSAL JOINT ASSEMBLY
7D-2939 DOUBLE UNIVERSAL JOINT ASSEMBLY
7D2939 DOUBLE UNIVERSAL JOINT ASSEMBLY
Serial No. 63G1 to 63G300
Part of Steering Gear shown on Page 143
DOUBLE UNIVERSAL JOINT ASSEMBLY
7D-2939 DOUBLE UNIVERSAL JOINT ASSEMBLY
7D2939 DOUBLE UNIVERSAL JOINT ASSEMBLY
Serial No. 63G301 to 63G338 inclusive
Part of Steering Gear shown on Page 143
DOUBLE UNIVERSAL JOINT ASSEMBLY
8D-3742 DOUBLE UNIVERSAL JOINT ASSEMBLY
8D3742 DOUBLE UNIVERSAL JOINT ASSEMBLY
Effective with Serial No. 63G339
Part of Steering Gear shown on Page 142A
TORQUE CONVERTER GP
COOLER GP-OIL
9S-4139 COOLER GP-OIL
TORQUE CONVERTER OIL COOLER (9S4139 N/S)
Serial No. 63G1 to 63G252 inclusive
Refer also to Page 192 for special parts
COOLER GP-OIL
9S-4139 COOLER GP-OIL
TORQUE CONVERTER OIL COOLER (9S4139 N/S)
Effective with Serial No. 63G253-Up
Refer also to Page 192 for special parts
THREE SPEED PLANETARY TRANSMISSION AND CONVERTER
9S-8832 THREE SPEED PLANETARY TRANSMISSION AND CONVERTER
THREE SPEED PLANETARY TRANSMISSION AND CONVERTER (9S8832 N/S)
Serial No. 63G1 to 263 and 63G265 to 63G269 inclusive
Part of 9S4417 Torque Divider Arrangement shown on Page 89
1T950 Torque Converter and 8M1071 Three Speed Planetary Torque
Divider parts are shown on Pages 94 through 96
THREE SPEED PLANETARY TRANSMISSION AND CONVERTER
9S-8832 THREE SPEED PLANETARY TRANSMISSION AND CONVERTER
THREE SPEED PLANETARY TRANSMISSION AND CONVERTER (9S8832 N/S)
Serial No. 63G264 and 63G270-Up. Part of 9S4417 Torque Divider Arrangement shown
on Page 89. 1T950 Torque Converter and Three Speed Planetary Transmission
parts are shown on Pages 94, 95, 96B & 96C
TORQUE CONVERTER ASSEMBLY
1T-0950 TORQUE CONVERTER ASSEMBLY
1T950 TORQUE CONVERTER ASSEMBLY--Part 1 of 2
Part of Three Speed Planetary and Converter shown on Page 91
TORQUE CONVERTER ASSEMBLY
1T-0950 TORQUE CONVERTER ASSEMBLY
1T950 TORQUE CONVERTER ASSEMBLY--Part 2 of 2
Part of Three Speed Planetary and Converter shown on Page 91
TORQUE CONVERTER OIL COOLER BY-PASS VALVE GROUP
2P-3699 TORQUE CONVERTER OIL COOLER BY-PASS VALVE GROUP
2P3699 TORQUE CONVERTER OIL COOLER BY-PASS VALVE GROUP
Field Installation
Protects Torque Converter from excessive pressure during cold starts
TORQUE DIVIDER GP
TORQUE DIVIDER ARRANGEMENT
9S-4417 TORQUE DIVIDER ARRANGEMENT
9S4417 TORQUE DIVIDER ARRANGEMENT
Torque Divider Hydraulic Control & Three Speed Planetary Transmission
and Converter parts are shown on Pages 90, 90A & 91
See Page 31 for Gasket Kits
6P-4702 LOW SPEED GEAR GROUP
6P4702 LOW SPEED GEAR GROUP--Field Installation
TRANSMISSION GP
THREE SPEED PLANETARY TRANSMISSION AND CONVERTER
9S-8832 THREE SPEED PLANETARY TRANSMISSION AND CONVERTER
THREE SPEED PLANETARY TRANSMISSION AND CONVERTER (9S8832 N/S)
Serial No. 63G1 to 263 and 63G265 to 63G269 inclusive
Part of 9S4417 Torque Divider Arrangement shown on Page 89
1T950 Torque Converter and 8M1071 Three Speed Planetary Torque
Divider parts are shown on Pages 94 through 96
THREE SPEED PLANETARY TRANSMISSION AND CONVERTER
9S-8832 THREE SPEED PLANETARY TRANSMISSION AND CONVERTER
THREE SPEED PLANETARY TRANSMISSION AND CONVERTER (9S8832 N/S)
Serial No. 63G264 and 63G270-Up. Part of 9S4417 Torque Divider Arrangement shown
on Page 89. 1T950 Torque Converter and Three Speed Planetary Transmission
parts are shown on Pages 94, 95, 96B & 96C
THREE SPEED PLANETARY TRANSMISSION GROUP
8M-1071 THREE SPEED PLANETARY TRANSMISSION GROUP
8M1071 THREE SPEED PLANETARY TRANSMISSION GROUP--Type 1
Serial No. 63G1 to 263 and 63G265 to 63G269 inclusive
Part of 9M8832 Three Speed Planetary Transmission and Converter Group shown on Page 90A
THREE SPEED PLANETARY TRANSMISSION GROUP
8M-1071 THREE SPEED PLANETARY TRANSMISSION GROUP
8M1071 THREE SPEED PLANETARY TRANSMISSION GROUP--Type 2
Serial No. 63G1 to 63G263 & 63G265 to 63G269 inclusive. Part of 9S8832
Three Speed Planetary Transmission & Converter Group shown on Page 90A
THREE SPEED PLANETARY TRANSMISSION GROUP
8S-9120 THREE SPEED PLANETARY TRANSMISSION GROUP
8S9120 THREE SPEED PLANETARY TRANSMISSION GROUP
Serial No. 63G264 and 63G270 to 63G313 inclusive
Part of 9S8832 Three Speed Planetary Transmission and Converter Group shown on Page 91
THREE SPEED PLANETARY TRANSMISSION GROUP
8S-9120 THREE SPEED PLANETARY TRANSMISSION GROUP
8S9120 THREE SPEED PLANETARY TRANSMISSION GROUP
Serial No. 63G314-Up. Part of 9S8832 Three Speed Planetary Transmission
and Converter Group shown on Page 91
RANGE TRANSMISSION ARRANGEMENT
8S-9145 RANGE TRANSMISSION ARRANGEMENT
8S9145 RANGE TRANSMISSION ARRANGEMENT--Part 1 of 2
Transfer Gear and Planetary Transmission parts are shown on Pages 101, 104 & 105
Refer to Page 198E for Low Speed Gears
RANGE TRANSMISSION ARRANGEMENT
8S-9145 RANGE TRANSMISSION ARRANGEMENT
8S9145 RANGE TRANSMISSION ARRANGEMENT--Part 2 of 2
Hydraulic Control and 3K6559 Parking Brake parts are shown on Pages 108, 109 & 114
Refer to Page 198E for Low Speed Gears
PLANETARY TRANSMISSION GROUP
9S-4420 PLANETARY TRANSMISSION GROUP
9S4420 PLANETARY TRANSMISSION GROUP--Part 1 of 2
Part of 8S9145 Range Transmission Arrangement shown on Page 102
PLANETARY TRANSMISSION GROUP
9S-4420 PLANETARY TRANSMISSION GROUP
9S4420 PLANETARY TRANSMISSION GROUP--Part 2 of 2
Part of 8S9145 Range Transmission Arrangement shown on Page 102
6P-4702 LOW SPEED GEAR GROUP
6P4702 LOW SPEED GEAR GROUP--Field Installation
VALVE GP-PRESSURE CONTROL
PRESSURE CONTROL VALVE GROUP
2S-4996 PRESSURE CONTROL VALVE GROUP
2S4996 PRESSURE CONTROL VALVE GROUP
Part of Torque Divider Hydraulic Control shown on Page 90
PRESSURE CONTROL VALVE GROUP
8S-0698 PRESSURE CONTROL VALVE GROUP
8S698 PRESSURE CONTROL VALVE GROUP
Part of Transmission Hydraulic Control shown on Page 108
VALVE GP-SELECTOR
SELECTOR VALVE GROUP
1P-7549 SELECTOR VALVE GROUP
1P7549 SELECTOR VALVE GROUP
Part of Torque Divider Hydraulic Control shown on Page 90
1P7548 and 7M8392 Body parts are shown on Pages 97 and 98
SELECTOR BODY GROUP
1P-7548 SELECTOR BODY GROUP
1P7548 SELECTOR BODY GROUP--Type 1
Part of 1P7549 Selector Valve Group shown on Page 91
SELECTOR BODY GROUP
1P-7548 SELECTOR BODY GROUP
1P7548 SELECTOR BODY GROUP--Type 2
Part of 1P7549 Selector Valve Group shown on Page 91
ACCUMULATOR BODY GROUP
7M-8392 ACCUMULATOR BODY GROUP
7M8392 ACCUMULATOR BODY GROUP
Part of 1P7549 Selector Valve Group shown on Page 91
SELECTOR VALVE GROUP
3S-6890 SELECTOR VALVE GROUP
3S6890 SELECTOR VALVE GROUP
Part of Transmission Hydraulic Control shown on Page 108
OVERRIDE SELECTOR VALVE
8S-3333 OVERRIDE SELECTOR VALVE
8S3333 OVERRIDE SELECTOR VALVE
Part of Transmission Hydraulic Control shown on Page 109
VALVE GP-TRANSMISSION CONTROL
THROTTLE PRESSURE AND CONVERTER HOLD VALVE
3S-0118 THROTTLE PRESSURE AND CONVERTER HOLD VALVE
3S118 THROTTLE PRESSURE AND CONVERTER HOLD VALVE
Serial No. 63G1 to 114, 116, 117, 119 and 63G122 inclusive
Part of Torque Divider Hydraulic Control shown on Page 90
THROTTLE PRESSURE AND CONVERTER HOLD VALVE
3S-0118 THROTTLE PRESSURE AND CONVERTER HOLD VALVE
3S118 THROTTLE PRESSURE AND CONVERTER HOLD VALVE
Serial No. 63G115, 118, 120, 121 and 63G123-Up
Part of Torque Divider Hydraulic Control shown on Page 90
TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL--Top View--Part 1 of 2
Part of 8S9145 Range Transmission Arrangement shown on Page 103
3S6890 Selector Valve and 8S698 Control Valve parts are shown on Pages 110 and 112
TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL--End View--Part 2 of 2
Part of 8S9145 Range Transmission Arrangement shown on Page 103
8S3330, 8S3333 Valves, 8S683 Shift Cylinder and 8S647 Switch parts are shown on Pages 110, 111 & 113
SAFETY RESET AND CONVERTER HOLD VALVE GROUP
8S-3330 SAFETY RESET AND CONVERTER HOLD VALVE GROUP
8S3330 SAFETY RESET AND CONVERTER HOLD VALVE GROUP
Part of Transmission Hydraulic Control shown on Page 109
LUBRICATION RELIEF VALVE
8S-0505 LUBRICATION RELIEF VALVE
8S505 LUBRICATION RELIEF VALVE
RELIEF VALVE GROUP
7J-8988 RELIEF VALVE GROUP
7J8988 RELIEF VALVE GROUP--Type 1
Part of 7J8987 Control Valve Group
RELIEF VALVE GROUP
5J-2875 RELIEF VALVE GROUP
5J2875 RELIEF VALVE GROUP--Brake Cooling
Part of 7J82 Tank & Valve Group shown on Page 157
RELIEF VALVE GROUP
7J-8988 RELIEF VALVE GROUP
7J8988 RELIEF VALVE GROUP--Type 2
Part of 7J8987 Control Valve Group shown on Page 158
WHEEL GP
RIM GP-DEMOUNTABLE
7D-2840 RIM GP-DEMOUNTABLE
RIM (7D2840 N/S)--21.00 x 35 Tubeless Tire
WHEEL GP-REAR
7D-2810 WHEEL GP-REAR
REAR WHEELS (7D2810 N/S)--21.00 x 35 Tubeless Tires
DRIVE GP-FINAL
FINAL DRIVE GP
7D-2850 FINAL DRIVE GP
FINAL DRIVE (7D2850 N/S)
Serial No. 63G1 to 63G211 inclusive
FINAL DRIVE GP
7D-2850 FINAL DRIVE GP
FINAL DRIVE (7D2850 N/S)
Effective with Serial No. 63G212

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Specifications
Accumulator Valve<BR> (7M8392)
772 TRACTOR & 773 TRUCK POWER TRAIN
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Rear Axle Housing
772 TRACTOR & 773 TRUCK POWER TRAIN
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Off-Highway Truck (769-777) Rear Axle Oil {0680, 0768, 3260, 4050}
Filtration Procedure for Off-Highway Truck (769-777) Rear Axle Oil {0680, 0768, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Rear Wheel Bearing And Duo-Cone Seal
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Brake Duo-Cone Seal
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Spindle
772 TRACTOR & 773 TRUCK POWER TRAIN
Front Wheel Bearing And Duo-Cone Seal
772 TRACTOR & 773 TRUCK VEHICLE SYSTEMS
Service Magazine
New Duo-Cone Seals In Rear Brake Group Have Steel Seal Rings{4208}
1983/08/08
Stronger, Longer Ring Gear Retainers For Final Drives {4054,4084}
1988/11/28
Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1994/10/10
Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1995/10/23
Effectivity Of Upgrades To Remanufactured Transmissions, Torque Converters And Wheel Assemblies {3001,4051}
1996/10/07
Duo-Cone Seal Assemblies With A Toric Available For Tractors And Trucks{4006,7555,4251,7561}
1997/08/04
High Pressure Washer Available For Final Drives And Axle Housings Of Off-Highway Trucks {0680,4050,3260}
1998/02/02
Updated Information For Improved Duo-Cone Seal Retainers On Certain Off-Highway Trucks{4251,4267,7561}
1998/03/09
Off-Highway Truck Duo-Cone Seal Service Tools And Installation Video Now Available{7561}
1999/02/01
Change in Oil Change Interval for the Final Drive and the Rear Axle in Off-Highway Trucks {4000, 4050, 7000, 7560, 7581}
2011/03/07
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Effectivity of Upgrades to Remanufactured Transmissions, Torque Converters and Wheel Assemblies {3030, 3101, 4051}
2007/04/02
Reuse Information on the Components in the Drive Train {3278, 4050}
2008/03/31
Available Seal Assembly For Off-Highway Truck Wheel And Brake Assembly Requires Proper Installation In Order To Improve Seal Reliability. {4051, 4251, 4267}
2009/02/16
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Cat Reman Announces the Addition of Power Train Components for Mining Trucks {3030, 3258, 4008, 4051, 4201, 4251, 4267}
2015/07/03
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Off-Highway Truck Final Drive Planetary Carrier {0760, 0761, 4084}
Off-Highway Truck Final Drive Planetary Carrier {0760, 0761, 4084}
Thermal Spray Procedures for OHT Planetary Carrier - Pin Bores{0679, 4084}
Thermal Spray Procedures for OHT Planetary Carrier - Pin Bores{0679, 4084}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Control Valve For Throttle Pressure<BR> (3S118)
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Hydraulic Control
772 TRACTOR & 773 TRUCK POWER TRAIN
Reuse And Salvage Guidelines
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Change To Tube In Transmission Shift Cylinder Group Will Prevent Contact With Air Cleaner Bracket{3163}
1979/05/14
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Special Instruction
Installation Of Service Replacement Differential Bearing Caps{3258}
Installation Of Service Replacement Differential Bearing Caps{3258}
Installation of Bevel Gear, Differential And Differential Housing (Flange Half) on Certain Cat Products {3256, 3258, 3281}
Installation of Bevel Gear, Differential And Differential Housing (Flange Half) on Certain Cat Products {3256, 3258, 3281}
Specifications
Differential And Bevel Gear<BR> (Standard And Nospin)
772 TRACTOR & 773 TRUCK POWER TRAIN
Nospin Differential Group<BR> (7D6973)
772 TRACTOR & 773 TRUCK POWER TRAIN
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Salvage of Differential Bearing Cage on Off-Highway Trucks {3258, 3283, 3284}
Salvage of Differential Bearing Cage on Off-Highway Trucks {3258, 3283, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Salvage of Differential Housing Assembly Used on Off-Highway Trucks {3258, 3283, 3284}
Salvage of Differential Housing Assembly Used on Off-Highway Trucks {3258, 3283, 3284}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281}
Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281}
Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281}
Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281}
Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284}
Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284}
Thermal Spray Procedures for OHT Differential Carrier{0679, 3258, 3284}
Thermal Spray Procedures for OHT Differential Carrier{0679, 3258, 3284}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Differential (773 Truck)
772 TRACTOR & 773 TRUCK POWER TRAIN
Differential (772 Tractor)
772 TRACTOR & 773 TRUCK POWER TRAIN
Differential
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
Different Oil And Extended Oil Change Intervals Recommended For Final Drives, Differentials And Front Wheel Bearings{3258,4050,4208}
1986/06/23
New Differential Group Has Tapered Roller Bearings For Pinion Gears{3258}
1977/12/12
New Self Locking Bolts Are Used In The Differential And Bevel Gear Group{3258}
1978/09/04
FT1449 Nut Turning Tool Used On Differential Adjustment Rings (Nuts){0622,0654}
1979/07/09
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Higher Viscosity Oil Should Be Used In Certain Final Drives And Differentials {4070,0645}
1996/12/16
New Procedure For The Adjustment Of The Differential Thrust Pin {3258, 3260, 3284}
2000/02/07
Proper Differential Warmup and Break-In Can Extend the Service Life of Differential Bearings on Certain Off-Highway Trucks {3258}
2012/06/01
Cat Reman Announces the Addition of Power Train Components for Mining Trucks {3030, 3258, 4008, 4051, 4201, 4251, 4267}
2015/07/03
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Salvage of Differential Housing Assembly Used on Off-Highway Trucks {3258, 3283, 3284}
Salvage of Differential Housing Assembly Used on Off-Highway Trucks {3258, 3283, 3284}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281}
Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281}
Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281}
Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281}
Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284}
Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284}
Thermal Spray Procedures for OHT Differential Carrier{0679, 3258, 3284}
Thermal Spray Procedures for OHT Differential Carrier{0679, 3258, 3284}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Proper Differential Warmup and Break-In Can Extend the Service Life of Differential Bearings on Certain Off-Highway Trucks {3258}
2012/06/01
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Service Magazine
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Reuse And Salvage Guidelines
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Transmission Oil Filter<BR> (7J5618)
772 TRACTOR & 773 TRUCK POWER TRAIN
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
New Bypass Valve Used In Oil Filters{3179,5068,3004}
1980/02/11
Screen Added To Oil Lines At Inlet Of Brake And Torque Converter Oil Cooler{1366,1365,1375,1376,3103,3154,3179,4257,4304,5057,5068}
1982/09/27
Lubricating Oil Recommendations For All Caterpillar Off-Highway Trucks And Tractors{7581,0645,3150,3179}
1990/07/09
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Specifications
Transfer Gears
772 TRACTOR & 773 TRUCK POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
Disassembly and Assembly
Transfer Gear
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
Spacers And Longer Bolts Are Now Used To Hold The Input Shaft Bearing Cage To The Case Assembly In The Transfer Gear Group{3159}
1977/11/07
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Lip Seals Are Used in the Transfer Gear Groups {1164, 3159}
2006/08/28
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
Screen Added To Oil Lines At Inlet Of Brake And Torque Converter Oil Cooler{1366,1365,1375,1376,3103,3154,3179,4257,4304,5057,5068}
1982/09/27
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Procedure To Clean Tractor And Off-Highway Truck Hydraulic And Power Train Oil Systems{5050}
Procedure To Clean Tractor And Off-Highway Truck Hydraulic And Power Train Oil Systems{5050}
Installation Of 2G4553 Thrust Plate{4201, 4209}
Installation Of 2G4553 Thrust Plate{4201, 4209}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Control Group For Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Shift Governor
772 TRACTOR & 773 TRUCK POWER TRAIN
Control Valve For Throttle Pressure<BR> (3S118)
772 TRACTOR & 773 TRUCK POWER TRAIN
Inlet Relief Valve For Oil Cooler
772 TRACTOR & 773 TRUCK POWER TRAIN
Shift Valve
772 TRACTOR & 773 TRUCK POWER TRAIN
Accumulator Valve<BR> (7M8392)
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Oil Pump<BR> (772, Serial Numbers 80S1-80S50) (773, Serial Numbers 63G1-63G339)
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Oil Pump<BR> (772, Serial Numbers 80S51-UP) (773, Serial Numbers 63G340-UP)
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Oil Filter<BR> (7J5618)
772 TRACTOR & 773 TRUCK POWER TRAIN
Lubrication Relief Valve
772 TRACTOR & 773 TRUCK POWER TRAIN
Range Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Hydraulic Control
772 TRACTOR & 773 TRUCK POWER TRAIN
Override Valve<BR> (8S3333)
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Transmission Oil Cooler
772 TRACTOR & 773 TRUCK ENGINE
Remove Torque Divider From Engine
772 TRACTOR & 773 TRUCK ENGINE
Rear Wheels
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Wheel Bearing And Duo-Cone Seal
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Brake Duo-Cone Seal
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Brake
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Spindle
772 TRACTOR & 773 TRUCK POWER TRAIN
Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Range Transmission (773 Truck)
772 TRACTOR & 773 TRUCK POWER TRAIN
Range Transmission (772 Tractor)
772 TRACTOR & 773 TRUCK POWER TRAIN
Range Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
New Bypass Valve Used In Oil Filters{3179,5068,3004}
1980/02/11
Do Not Use Planet Gears Made From Forgings And Bar Stock Together In A Torque Divider Transmission {3110,3113,3114,3116,3118}
1980/09/22
Screen Added To Oil Lines At Inlet Of Brake And Torque Converter Oil Cooler{1366,1365,1375,1376,3103,3154,3179,4257,4304,5057,5068}
1982/09/27
Drive Shaft Restraint Added To Drive Shaft Guard Group{3253}
1984/10/01
Repair Of Speed Sensor Harness On Electronically Controlled Transmissions{3168,3175}
1986/01/13
Different Oil And Extended Oil Change Intervals Recommended For Final Drives, Differentials And Front Wheel Bearings{3258,4050,4208}
1986/06/23
Pin Added To Oil Manifold Assembly In Power Shift Transmission{3150}
1977/03/07
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Hub Flange For Front Wheel Now Has A Different Shape On The Outer Circumference{4201}
1977/12/12
Relay Added To Back-Up Alarm And Back-Up Light Circuits Gives Longer Life To Transmission Control Switch{3171,7406,7309}
1978/06/05
Improved Parts Are Used In Rim Groups{4202}
1978/08/28
Change In Rear Wheel Design; New Valve Group Used{4201,4202,4208}
1978/09/11
Stronger, Longer Ring Gear Retainers For Final Drives {4054,4084}
1988/11/28
Change To Tube In Transmission Shift Cylinder Group Will Prevent Contact With Air Cleaner Bracket{3163}
1979/05/14
Spring Removed From Relay Valve On Scraper Brake Control Group{4280}
1979/06/18
Lubricating Oil Recommendations For All Caterpillar Off-Highway Trucks And Tractors{7581,0645,3150,3179}
1990/07/09
Drive Shaft Must Be Balanced When Yoke Or Tube Is Replaced Separately{3251,3253}
1990/07/09
Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1994/10/10
Effectivity Of Upgrades To Remanufactured Transmissions, Torque Converters And Wheel Assemblies {3001,4051}
1996/10/07
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Higher Viscosity Power Train Oil Should Be Used in Certain Applications {4070,0645}
1996/10/28
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Transmission Oil Pump<BR> (772, Serial Numbers 80S1-80S50) (773, Serial Numbers 63G1-63G339)
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Oil Pump<BR> (772, Serial Numbers 80S51-UP) (773, Serial Numbers 63G340-UP)
772 TRACTOR & 773 TRUCK POWER TRAIN
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Service Magazine
New Bypass Valve Used In Oil Filters{3179,5068,3004}
1980/02/11
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Specifications
Oil Pump Drive Shaft
772 TRACTOR & 773 TRUCK POWER TRAIN
Drive Shaft
772 TRACTOR & 773 TRUCK POWER TRAIN
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Service Magazine
Drive Shaft Restraint Added To Drive Shaft Guard Group{3253}
1984/10/01
Drive Shaft Must Be Balanced When Yoke Or Tube Is Replaced Separately{3251,3253}
1990/07/09
Use the Recommended Grease on the Drive Shaft Slip Joints {0645, 3253}
2002/03/04
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Service Magazine
Drive Shaft Must Be Balanced When Yoke Or Tube Is Replaced Separately{3251,3253}
1990/07/09
Reuse And Salvage Guidelines
Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205}
Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205}
Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205}
Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
Filtration Procedure for Off-Highway Truck (769-777) Rear Axle Oil {0680, 0768, 3260, 4050}
Filtration Procedure for Off-Highway Truck (769-777) Rear Axle Oil {0680, 0768, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
General Application Axle Installer Used On Many Different Caterpillar-Built Machines{0622}
1977/09/05
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
High Pressure Washer Available For Final Drives And Axle Housings Of Off-Highway Trucks {0680,4050,3260}
1998/02/02
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Special Instruction
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
1T-0149 Bearing Outer Race Inspection and Reuse {3100, 3101, 3102, 3113}
1T-0149 Bearing Outer Race Inspection and Reuse {3100, 3101, 3102, 3113}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Remove Torque Divider From Engine
772 TRACTOR & 773 TRUCK ENGINE
Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
Screen Added To Oil Lines At Inlet Of Brake And Torque Converter Oil Cooler{1366,1365,1375,1376,3103,3154,3179,4257,4304,5057,5068}
1982/09/27
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Effectivity Of Upgrades To Remanufactured Transmissions, Torque Converters And Wheel Assemblies {3001,4051}
1996/10/07
Use 143-5455 Lifting Bracket for Torque Converter Removal and Installation {1003,3101,4092}
1998/08/10
Effectivity of Upgrades to Remanufactured Transmissions, Torque Converters and Wheel Assemblies {3030, 3101, 4051}
2007/04/02
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2015/09/28
Specifications
Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Control Group For Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
1T-0149 Bearing Outer Race Inspection and Reuse {3100, 3101, 3102, 3113}
1T-0149 Bearing Outer Race Inspection and Reuse {3100, 3101, 3102, 3113}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Disassembly and Assembly
Remove Torque Divider From Engine
772 TRACTOR & 773 TRUCK ENGINE
Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
Do Not Use Planet Gears Made From Forgings And Bar Stock Together In A Torque Divider Transmission {3110,3113,3114,3116,3118}
1980/09/22
Correct End Play Is Important For 3-Speed Torque Divider{3110}
1978/08/07
Use 143-5455 Lifting Bracket for Torque Converter Removal and Installation {1003,3101,4092}
1998/08/10
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2015/09/28
Special Instruction
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Specifications
Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Control Group For Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Shift Governor
772 TRACTOR & 773 TRUCK POWER TRAIN
Control Valve For Throttle Pressure<BR> (3S118)
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Oil Pump<BR> (772, Serial Numbers 80S1-80S50) (773, Serial Numbers 63G1-63G339)
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Oil Pump<BR> (772, Serial Numbers 80S51-UP) (773, Serial Numbers 63G340-UP)
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Oil Filter<BR> (7J5618)
772 TRACTOR & 773 TRUCK POWER TRAIN
Range Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Hydraulic Control
772 TRACTOR & 773 TRUCK POWER TRAIN
Override Valve<BR> (8S3333)
772 TRACTOR & 773 TRUCK POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
Testing and Adjusting
Testing And Adjusting
772 & 773 POWER SHIFT TRANSMISSION (80S1-80S50, 63G1-63G339)
Testing And Adjusting
772 & 773 POWER SHIFT TRANSMISSION (80S51-UP, 63G340-UP)
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission Oil Cooler
772 TRACTOR & 773 TRUCK ENGINE
Torque Divider Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Range Transmission (773 Truck)
772 TRACTOR & 773 TRUCK POWER TRAIN
Range Transmission (772 Tractor)
772 TRACTOR & 773 TRUCK POWER TRAIN
Range Transmission
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
Do Not Use Planet Gears Made From Forgings And Bar Stock Together In A Torque Divider Transmission {3110,3113,3114,3116,3118}
1980/09/22
Pin Added To Oil Manifold Assembly In Power Shift Transmission{3150}
1977/03/07
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Relay Added To Back-Up Alarm And Back-Up Light Circuits Gives Longer Life To Transmission Control Switch{3171,7406,7309}
1978/06/05
Change To Tube In Transmission Shift Cylinder Group Will Prevent Contact With Air Cleaner Bracket{3163}
1979/05/14
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Effectivity Of Upgrades To Remanufactured Transmissions, Torque Converters And Wheel Assemblies {3001,4051}
1996/10/07
Service Information For Off-Highway Truck Transmissions {3080,3030,3050}
1998/08/10
Changes To Oil Viscosity Recommendations For Off-Highway Truck Transmissions {0374,3150}
1999/10/04
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Effectivity of Upgrades to Remanufactured Transmissions, Torque Converters and Wheel Assemblies {3030, 3101, 4051}
2007/04/02
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Cat Reman Announces the Addition of Power Train Components for Mining Trucks {3030, 3258, 4008, 4051, 4201, 4251, 4267}
2015/07/03
Specifications
Control Valve For Throttle Pressure<BR> (3S118)
772 TRACTOR & 773 TRUCK POWER TRAIN
Override Valve<BR> (8S3333)
772 TRACTOR & 773 TRUCK POWER TRAIN
Reuse And Salvage Guidelines
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Specifications
Shift Governor
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
A 6I-9512 Cover Must be Used for the Lockup Clutch and Solenoid Valve {3074, 3124}
2000/02/14
Specifications
Lubrication Relief Valve
772 TRACTOR & 773 TRUCK POWER TRAIN
Reuse And Salvage Guidelines
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Specifications
Pressure Control Valve<BR> (Torque Divider Transmission)
772 TRACTOR & 773 TRUCK POWER TRAIN
Pressure Control Valve<BR> (Range Transmission)
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
A 6I-9512 Cover Must be Used for the Lockup Clutch and Solenoid Valve {3074, 3124}
2000/02/14
Spring Removed From Relay Valve On Scraper Brake Control Group{4280}
1979/06/18
New Double Check Valve Available For Brake Systems With Dual Brake Relay Valves {4281,4280}
1997/07/21
Specifications
Inlet Relief Valve For Oil Cooler
772 TRACTOR & 773 TRUCK POWER TRAIN
Lubrication Relief Valve
772 TRACTOR & 773 TRUCK POWER TRAIN
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Specifications
Shift Valve
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
Spring Removed From Relay Valve On Scraper Brake Control Group{4280}
1979/06/18
Specifications
Control Valve For Throttle Pressure<BR> (3S118)
772 TRACTOR & 773 TRUCK POWER TRAIN
Transmission Hydraulic Control
772 TRACTOR & 773 TRUCK POWER TRAIN
Reuse And Salvage Guidelines
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Salvage of Brake Housings Used on Off-Highway Trucks{4001, 4251, 4267}
Salvage of Brake Housings Used on Off-Highway Trucks{4001, 4251, 4267}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Procedure for Repairing Wheel Rims for Off-Highway Trucks{4201, 4202, 4209}
Procedure for Repairing Wheel Rims for Off-Highway Trucks{4201, 4202, 4209}
Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051}
Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Do Not Weld Repair Worn Wheel Spindles For Off-Highway Trucks Or Wheel Tractor-Scrapers{4002,4205,4234}
1991/05/20
Improved Front Wheel Group Assemblies and Improved Rear Wheel Group Assemblies are Used on Off-Highway Trucks {4201}
2007/12/17
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Off-Highway Truck Rear Wheel Salvage For Fabricated And Cast Wheels{4208}
Off-Highway Truck Rear Wheel Salvage For Fabricated And Cast Wheels{4208}
Installation Of 2G4553 Thrust Plate{4201, 4209}
Installation Of 2G4553 Thrust Plate{4201, 4209}
Procedure for Salvaging Off-Highway Truck Wheel Bolt Holes or Stud Holes{4201}
Procedure for Salvaging Off-Highway Truck Wheel Bolt Holes or Stud Holes{4201}
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Rear Brake Cylinder
768B & 772 TRACTORS, 769B & 773 TRUCKS AIR SYSTEM & BRAKE
Rear Axle Housing
772 TRACTOR & 773 TRUCK POWER TRAIN
Wheel Bearing Adjustment
772 TRACTOR & 773 TRUCK POWER TRAIN
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201}
Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201}
Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215}
Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215}
Inspection and Salvage of Rear Wheel Spindles for All Off-Highway Trucks {4201, 4205}
Inspection and Salvage of Rear Wheel Spindles for All Off-Highway Trucks {4201, 4205}
Inspection of Rim Assemblies of Off-Highway Trucks{4201, 4209}
Inspection of Rim Assemblies of Off-Highway Trucks{4201, 4209}
Procedure to Salvage Reaction Hubs, Retainers, and Seal Retainers Used in Wheel Groups of Off-Highway Trucks{4001, 4008, 4050, 4051}
Procedure to Salvage Reaction Hubs, Retainers, and Seal Retainers Used in Wheel Groups of Off-Highway Trucks{4001, 4008, 4050, 4051}
Procedure for Repairing Wheel Rims for Off-Highway Trucks{4201, 4202, 4209}
Procedure for Repairing Wheel Rims for Off-Highway Trucks{4201, 4202, 4209}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205}
Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205}
Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201}
Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201}
Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205}
Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205}
Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201}
Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
Inspection and Salvage of Front Wheel Spindles for Off-Highway Trucks {4201, 4205}
Inspection and Salvage of Front Wheel Spindles for Off-Highway Trucks {4201, 4205}
Disassembly and Assembly
Rear Wheels
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Wheel Bearing And Duo-Cone Seal
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Brake Duo-Cone Seal
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Brake
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Spindle
772 TRACTOR & 773 TRUCK POWER TRAIN
Front Wheel
772 TRACTOR & 773 TRUCK VEHICLE SYSTEMS
Front Wheel Bearing And Duo-Cone Seal
772 TRACTOR & 773 TRUCK VEHICLE SYSTEMS
Rear Brake Master Cylinder
772 TRACTOR & 773 TRUCK VEHICLE SYSTEMS
Tie Rods And Wheel Alignment
772 TRACTOR & 773 TRUCK VEHICLE SYSTEMS
Service Magazine
New Duo-Cone Seals In Rear Brake Group Have Steel Seal Rings{4208}
1983/08/08
Different Oil And Extended Oil Change Intervals Recommended For Final Drives, Differentials And Front Wheel Bearings{3258,4050,4208}
1986/06/23
Hub Flange For Front Wheel Now Has A Different Shape On The Outer Circumference{4201}
1977/12/12
Improved Parts Are Used In Rim Groups{4202}
1978/08/28
Change In Rear Wheel Design; New Valve Group Used{4201,4202,4208}
1978/09/11
Steel Shims Are Now Used To Adjust The Preload On The Front Wheel Bearings{4208,4200}
1979/10/22
Do Not Weld Repair Worn Wheel Spindles For Off-Highway Trucks Or Wheel Tractor-Scrapers{4002,4205,4234}
1991/05/20
Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1994/10/10
Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1995/10/23
Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1996/01/08
Effectivity Of Upgrades To Remanufactured Transmissions, Torque Converters And Wheel Assemblies {3001,4051}
1996/10/07
New Material Increases Service Life Of Brake Hubs{4215,4208,4201}
1996/11/11
New Material Increases Service Life Of Brake Hubs {4215,4208,4201}
1997/05/05
Pre-Compressed Brake Dampers Available For Quarry Trucks, Tractors, And Off-Highway Trucks To Provide Improved Brake Life {4251,4267}
1997/06/30
Oil Change Intervals Lowered For Front Wheels On All Off-Highway Tractors And Trucks {4201,4208,7525}
1997/06/30
Improved Retarder And Secondary Brake Handles And Valves{3121,3123,4269,4282,4284}
1997/07/14
New Double Check Valve Available For Brake Systems With Dual Brake Relay Valves {4281,4280}
1997/07/21
Duo-Cone Seal Assemblies With A Toric Available For Tractors And Trucks{4006,7555,4251,7561}
1997/08/04
High Pressure Washer Available For Final Drives And Axle Housings Of Off-Highway Trucks {0680,4050,3260}
1998/02/02
Special Instruction, SEHS9364-02, &quot;Off-Highway Truck Rear Wheel Salvage&quot;, Is Now Available {0374,4208}
1998/02/16
Updated Information For Improved Duo-Cone Seal Retainers On Certain Off-Highway Trucks{4251,4267,7561}
1998/03/09
Remanufactured Wheel Stations And Wheel Station Components For Off-Highway Trucks {3001,4051}
1998/08/17
Off-Highway Truck Duo-Cone Seal Service Tools And Installation Video Now Available{7561}
1999/02/01
Alternate Torque Values For The Wheel Rim Mounting Bolts For The Small Off-Highway Trucks {4201}
1999/11/15
Inspection of Magnetic Plugs Recommended To Help Detect Early Bearing Failure {4201, 4201}
2000/01/17
Duo-Cone Seal Kits Have Changed for Off-Highway Trucks {4208, 4251, 7561}
2000/03/06
Change in Oil Change Interval for the Final Drive and the Rear Axle in Off-Highway Trucks {4000, 4050, 7000, 7560, 7581}
2011/03/07
Correction to Special Instruction, SEHS9364-03, "Off-Highway Truck Rear Wheel Salvage for Fabricated and Cast Wheels" {4201, 4208}
2000/07/03
Match Tire Size in Dual Tire Configurations for Increased Service Life {4203}
2001/06/18
Improved Front Wheel Group Assemblies and Improved Rear Wheel Group Assemblies are Used on Off-Highway Trucks {4201}
2007/12/17
Guideline for Reusable Parts and Salvage Operations is Available for Spindles of Off-Highway Trucks {4002, 4205}
2000/11/13
Changes to the Rear Spindle and to the Bearing Cone {4208, 4234, 7551}
2002/01/21
A New Bearing and a New Retainer Improve Serviceability {4050, 4201}
2003/01/06
An Increased Torque Replaces The Use of Anti-seize Compound on the Rear Wheel Group. {4201}
2005/10/17
Effectivity of Upgrades to Remanufactured Transmissions, Torque Converters and Wheel Assemblies {3030, 3101, 4051}
2007/04/02
Available Seal Assembly For Off-Highway Truck Wheel And Brake Assembly Requires Proper Installation In Order To Improve Seal Reliability. {4051, 4251, 4267}
2009/02/16
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Cat Reman Announces the Addition of Power Train Components for Mining Trucks {3030, 3258, 4008, 4051, 4201, 4251, 4267}
2015/07/03
Cat Reman Announces Availability of New Wheels With Installed Studs for Certain Machines {4201}
2015/07/01
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Disassembly and Assembly
Transmission Oil Cooler
772 TRACTOR & 773 TRUCK ENGINE
Service Magazine
Screen Added To Oil Lines At Inlet Of Brake And Torque Converter Oil Cooler{1366,1365,1375,1376,3103,3154,3179,4257,4304,5057,5068}
1982/09/27
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
New Tube Assemblies And Elbows In Radiator, Water Lines And Brake Oil Cooler Groups Will Prevent Loose Hose Connections{1380,1353,1365}
1978/04/03
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Final Drives And Wheels
772 TRACTOR & 773 TRUCK POWER TRAIN
Rear Axle Housing
772 TRACTOR & 773 TRUCK POWER TRAIN
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215}
Procedure to Remove Large Wheel Bearing Cups {4001, 4008, 4051, 4215}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Off-Highway Truck Final Drive Planetary Carrier {0760, 0761, 4084}
Off-Highway Truck Final Drive Planetary Carrier {0760, 0761, 4084}
Procedure to Salvage Reaction Hubs, Retainers, and Seal Retainers Used in Wheel Groups of Off-Highway Trucks{4001, 4008, 4050, 4051}
Procedure to Salvage Reaction Hubs, Retainers, and Seal Retainers Used in Wheel Groups of Off-Highway Trucks{4001, 4008, 4050, 4051}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051}
Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051}
Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051}
Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051}
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Off-Highway Truck Final Drive Planet Gear{4084}
Thermal Spray Procedures for Off-Highway Truck Final Drive Planet Gear{4084}
Thermal Spray Procedures for OHT Planetary Carrier - Pin Bores{0679, 4084}
Thermal Spray Procedures for OHT Planetary Carrier - Pin Bores{0679, 4084}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Off-Highway Truck (769-777) Rear Axle Oil {0680, 0768, 3260, 4050}
Filtration Procedure for Off-Highway Truck (769-777) Rear Axle Oil {0680, 0768, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Axle
772 TRACTOR & 773 TRUCK POWER TRAIN
Final Drive
772 TRACTOR & 773 TRUCK POWER TRAIN
Final Drive Ring Gear
772 TRACTOR & 773 TRUCK POWER TRAIN
Service Magazine
Different Oil And Extended Oil Change Intervals Recommended For Final Drives, Differentials And Front Wheel Bearings{3258,4050,4208}
1986/06/23
Stronger Carrier Used In Final Drive Group{4092}
1978/06/05
Stronger, Longer Ring Gear Retainers For Final Drives {4054,4084}
1988/11/28
Do Not Weld Repair Worn Wheel Spindles For Off-Highway Trucks Or Wheel Tractor-Scrapers{4002,4205,4234}
1991/05/20
Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1994/10/10
Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1995/10/23
Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1996/01/08
Higher Viscosity Oil Should Be Used In Certain Final Drives And Differentials {4070,0645}
1996/12/16
High Pressure Washer Available For Final Drives And Axle Housings Of Off-Highway Trucks {0680,4050,3260}
1998/02/02
Change in Oil Change Interval for the Final Drive and the Rear Axle in Off-Highway Trucks {4000, 4050, 7000, 7560, 7581}
2011/03/07
A New Bearing and a New Retainer Improve Serviceability {4050, 4201}
2003/01/06
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
A New Thrust Washer Improves the Service Life of the Planetary Gears {4050}
2005/01/10
Effectivity of Upgrades to Remanufactured Transmissions, Torque Converters and Wheel Assemblies {3030, 3101, 4051}
2007/04/02
Reuse Information on the Components in the Drive Train {3278, 4050}
2008/03/31
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Available Seal Assembly For Off-Highway Truck Wheel And Brake Assembly Requires Proper Installation In Order To Improve Seal Reliability. {4051, 4251, 4267}
2009/02/16
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Cat Reman Announces the Addition of Power Train Components for Mining Trucks {3030, 3258, 4008, 4051, 4201, 4251, 4267}
2015/07/03
New Bypass Valve Used In Oil Filters{3179,5068,3004}
1980/02/11

Truck sale:

CATERPILLAR 773 1973
 
CATERPILLAR 773 1973
- OFF HIGHWAY TRUCKS
BORUSAN MAKINA
Cumhuriyet Mh. Güney Yanyol cd. No:26 Gebze - Kocaeli
CATERPILLAR 773 1973
 
CATERPILLAR 773 1973
- OFF HIGHWAY TRUCKS
BORUSAN MAKINA
Cumhuriyet Mh. Güney Yanyol cd. No:26 Gebze - Kocaeli
CATERPILLAR 773 1973
 
CATERPILLAR 773 1973
- OFF HIGHWAY TRUCKS
BORUSAN MAKINA
Cumhuriyet Mh. Güney Yanyol cd. No:26 Gebze - Kocaeli
CATERPILLAR 773 1973
 
CATERPILLAR 773 1973
- OFF HIGHWAY TRUCKS
BORUSAN MAKINA
Cumhuriyet Mh. Güney Yanyol cd. No:26 Gebze - Kocaeli
CATERPILLAR 773 1973
 
CATERPILLAR 773 1973
- OFF HIGHWAY TRUCKS
BORUSAN MAKINA
Cumhuriyet Mh. Güney Yanyol cd. No:26 Gebze - Kocaeli
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.