825B COMPACTOR 43N00494-UP (MACHINE) POWERED BY D343 ENGINE AIR INLET AND EXHAUST SYSTEM Caterpillar SIS




SOIL COMPACTOR 825B SOIL COMPACTOR 43N
 825B COMPACTOR 43N00494-UP (MACHINE) POWERED BY D343 ENGINE UEG0263S 825B 43N   (1969)

Parts group 825B:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
AFTERCOOLER GROUP
9M-4023 AFTERCOOLER GROUP
9M4023 AFTERCOOLER GROUP
Serial No. 43N494-Up and Engine Serial No. 52K1-Up
AIR CLEANER GP
PRECLEANER AS
2S-5651 PRECLEANER AS
2S5651 PRECLEANER ASSEMBLY
Serial No. 43N494 to 43N1092 inclusive
Part of 1S2375 Air Cleaner Group shown on Page 16
PRECLEANER GP
6N-8588 PRECLEANER GP
6N8588 PRECLEANER GROUP
Serial No. 43N1093-Up
Part of 6N4011 Air Cleaner Group shown on Page 16-1
AIR CLEANER GROUP
1S-2375 AIR CLEANER GROUP
1S2375 AIR CLEANER GROUP--Top View
Serial No. 43N494 to 43N1092 inclusive
2S5651 Precleaner parts are shown on Page 15B
AIR CLEANER GROUP
6N-4011 AIR CLEANER GROUP
6N4011 AIR CLEANER GROUP
Serial No. 43N1093-Up
6N8588 Precleaner parts are shown on Page 15B
EXHAUST GP
EXHAUST EXTENSION GROUP
7M-9876 EXHAUST EXTENSION GROUP
7M9876 EXHAUST EXTENSION GROUP
Serial No. 43N494 to 43N781 inclusive
Refer also to Page 163 for special parts
MANIFOLD GP-EXHAUST
MANIFOLDS
1P-4362 MANIFOLDS
MANIFOLDS (1P4362 N/S)--Side View--Part 1 of 2
Serial No. 43N494 to 43N781 inclusive
1P-4362 MANIFOLDS
MANIFOLDS (1P4362 N/S)--End View--Part 2 of 2
Serial No. 43N494 to 43N781 inclusive
Refer also to Page 141 for special parts
MANIFOLD GROUP
1P-4362 MANIFOLD GROUP
1P4362 MANIFOLD GROUP--Side View--Part 1 of 2
Serial No. 43N782-Up and Engine Serial No. 52K1-Up
1P-4362 MANIFOLD GROUP
1P4362 MANIFOLD GROUP--End View--Part 2 of 2
Serial No. 43N782-Up and Engine Serial No. 52K1-Up
MANIFOLD GP-INLET
MANIFOLDS
1P-4362 MANIFOLDS
MANIFOLDS (1P4362 N/S)--Side View--Part 1 of 2
Serial No. 43N494 to 43N781 inclusive
1P-4362 MANIFOLDS
MANIFOLDS (1P4362 N/S)--End View--Part 2 of 2
Serial No. 43N494 to 43N781 inclusive
Refer also to Page 141 for special parts
MANIFOLD GROUP
1P-4362 MANIFOLD GROUP
1P4362 MANIFOLD GROUP--Side View--Part 1 of 2
Serial No. 43N782-Up and Engine Serial No. 52K1-Up
1P-4362 MANIFOLD GROUP
1P4362 MANIFOLD GROUP--End View--Part 2 of 2
Serial No. 43N782-Up and Engine Serial No. 52K1-Up
MUFFLER GP
MUFFLER GROUP
2P-0248 MUFFLER GROUP
2P248 MUFFLER GROUP
Serial No. 43N782 to 43N1039 inclusive
MUFFLER GROUP
2P-3180 MUFFLER GROUP
2P3180 MUFFLER GROUP
Serial No. 43N1040 to 43N1093 inclusive. Also part of 8K9240, 2V4904, 2V4903, 1V2558 and 1V6311
Sound Suppression Arrangements listed on Pages 160-1, 160-1a and 160-1c
MUFFLER GROUP
6N-3454 MUFFLER GROUP
6N3454 MUFFLER GROUP
Serial No. 43N1094-Up
MUFFLER GROUP
6N-3455 MUFFLER GROUP
6N3455 MUFFLER GROUP
Part of 2V4903, 2V4904, 1V2558 and 1V6311 Sound Suppression Arrangements listed on Pages 160-1b and 160-1d
AN ATTACHMENT
MUFFLER GROUP
8S-6444 MUFFLER GROUP
8S6444 MUFFLER GROUP
Serial No. 43N494 to 43N781 inclusive
TURBOCHARGER GP
TURBOCHARGER ASSEMBLY
8S-6472 TURBOCHARGER ASSEMBLY
8S6472 TURBOCHARGER ASSEMBLY (7M4892 N/S)
Serial No. 43N494 to 43N866 inclusive
TURBOCHARGER GP
4N-5640 TURBOCHARGER GP
4N5640 TURBOCHARGER GROUP (7M4892 N/S)
Serial No. 43N867-Up and Engine Serial No. 52K1-Up

Information:

(For parts list, see above)

Disassembly and Assembly
Aftercooler Core
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Special Instruction
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Specifications
Air Cleaner
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Disassembly and Assembly
Air Cleaner Housing
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Larger 7N1308 Secondary Air Filter Can Be Used In Place Of 1P8482 Secondary Air Filter{1054}
1991/07/01
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Specifications
Differential Pressure Regulator
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Exhaust Manifold And Elbow
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Service Magazine
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Service Magazine
Larger 7N1308 Secondary Air Filter Can Be Used In Place Of 1P8482 Secondary Air Filter{1054}
1991/07/01
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Exhaust Manifold And Elbow
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Disassembly and Assembly
Exhaust Manifold
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Specifications
Differential Pressure Regulator
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Disassembly and Assembly
Pressure Ratio Regulator
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Aftercooler Core
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Larger 7N1308 Secondary Air Filter Can Be Used In Place Of 1P8482 Secondary Air Filter{1054}
1991/07/01
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Service Magazine
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger<BR> (T18)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Turbocharger<BR> (T1810 and T1814)
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Disassembly and Assembly
Pressure Ratio Regulator
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Turbocharger
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Hole in the Turbine Housing of the Turbocharger {1052}
2006/06/26
Packaging the Turbocharger {1052}
2007/02/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Tool Operating Manual
Compact DPF Cleaner{0599, 0701, 0702, 108F}
Compact DPF Cleaner{0599, 0701, 0702, 108F}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
Service Magazine
Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E}
2012/09/11

Truck sale:

1978 CAT 825B
USD $16,030 
1978 CAT 825B

Alaskan Equipment Sales
1970 CAT 825B
USD $16,000 
1970 CAT 825B

RMB EQUIPMENT
Middleville, Michigan
1971 CAT 825B
USD $30,000 
1971 CAT 825B

Job Rentals & Sales LLC
Jeffersonville, Indiana
1973 CAT 825B
Call 
1973 CAT 825B

Ran Equipment
Memphis, Tennessee
1985 CAT 825B
USD $23,902 
1985 CAT 825B

ECOGLOBAL 21
CATALUNA, SALLENT, Spain