AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

825B COMPACTOR 43N00494-UP (MACHINE) POWERED BY D343 ENGINE BASIC ENGINE Caterpillar SIS



SOIL COMPACTOR 825B SOIL COMPACTOR 43N
 825B COMPACTOR 43N00494-UP (MACHINE) POWERED BY D343 ENGINE UEG0263S 825B 43N   (1969)

Parts group 825B:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
9S-0737 CAMSHAFT GP
CAMSHAFT (9S737 N/S)
Serial No. 43N494 to 43N550 inclusive
CAMSHAFT GP
9S-0737 CAMSHAFT GP
9S737 CAMSHAFT GROUP
Serial No. 43N551-Up and Engine Serial No. 52K1-Up
CRANKSHAFT GP
CRANKSHAFT
9S-4075 CRANKSHAFT
CRANKSHAFT (9S4075 N/S)
Serial No. 43N494 to 43N753 inclusive
CRANKSHAFT GROUP
9S-4075 CRANKSHAFT GROUP
9S4075 CRANKSHAFT GROUP
Serial No. 43N754 to 43N1118 inclusive
CRANKSHAFT GP
1P-4430 CRANKSHAFT GP
1P4430 CRANKSHAFT GROUP
Serial No. 43N1119-Up and Engine Serial No. 52K1 to 52K641 inclusive
CRANKSHAFT GP
1P-4430 CRANKSHAFT GP
1P4430 CRANKSHAFT GROUP
Engine Serial No. 52K642-Up
CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CYLINDER BLOCK GP
CYLINDER BLOCK GP
7S-3593 CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS (7S3593 N/S)--Side View--Part 1 of 3
Serial No. 43N494 to 43N550 inclusive. Cylinder Block parts are shown on Page 27
See Page 29 for Gasket Kit. Note: 1P698 Piston & Liner Group, consisting of:
1--Piston Assembly, 1--Liner and 3--Seal, is available
7S-3593 CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS (7S3593 N/S)--Rear View--Part 2 of 3
Serial No. 43N494 to 43N550 inclusive
7S-3593 CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS (7S3593 N/S)--Front View--Part 3 of 3
Serial No. 43N494 to 43N550 inclusive
Refer also to Page 161 for special parts
CYLINDER BLOCK GP
7S-3593 CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS (7S3593 N/S)--Side View--Part 1 of 3
Serial No. 43N551 to 43N696 inclusive
Cylinder Block parts are shown on Page 27B. See Page 29 for Gasket Kit
Note: 1P698 Piston and Liner Group, consisting of: 1--Piston Assembly, 1--Liner and 3--Seal, is available
7S-3593 CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS (7S3593 N/S)--Rear View--Part 2 of 3
Serial No. 43N551 to 43N696 inclusive
7S-3593 CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS (7S3593 N/S)--Front View--Part 3 of 3
Serial No. 43N551 to 43N696 inclusive
Refer also to Page 161 for special parts
CYLINDER BLOCK GP
7S-3593 CYLINDER BLOCK GP
7S3593 CYLINDER BLOCK AND COVER GROUP--Side View--Part 1 of 3
Serial No. 43N697-Up and Engine Serial No. 52K1-Up
7S3601 Cylinder Block parts are shown on Page 27B. See Page 29 for Gasket Kit
7S-3593 CYLINDER BLOCK GP
7S3593 CYLINDER BLOCK AND COVER GROUP--Rear View--Part 2 of 3
Serial No. 43N697-Up and Engine Serial No. 52K1-Up
7S-3593 CYLINDER BLOCK GP
7S3593 CYLINDER BLOCK AND COVER GROUP--Front View--Part 3 of 3
Serial No. 43N697-Up and Engine Serial No. 52K1-Up
Refer also to Page 161 for special parts
CYLINDER BLOCK ASSEMBLY
7S-3601 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY (7S3601 N/S)
Serial No. 43N494 to 43N550 inclusive
Part of Cylinder Block and Covers shown on Page 24
Note: For Field Replacement order 9S6169 Service Block Group
CYLINDER BLOCK
7S-3601 CYLINDER BLOCK
CYLINDER BLOCK (7S3601 N/S)
Serial No. 43N551-Up. Part of Cylinder Block and Covers shown on Pages 24C and 25A
Note: For Field Replacement order 9S6169 Service Block Group
CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM
1P-4363 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (1P4363 N/S)--Side View--Part 1 of 2
Serial No. 43N494 to 43N696 inclusive
See Page 29 for Gasket Kit
1P-4363 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (1P4363 N/S)--End View--Part 2 of 2
Serial No. 43N494 to 43N696 inclusive
CYLINDER HEAD AND VALVE MECHANISM
1P-4363 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (1P4363 N/S)--Side View--Part 1 of 2
Serial No. 43N697 to 43N882 inclusive
See Page 29 for Gasket Kit
1P-4363 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (1P4363 N/S)--End View--Part 2 of 2
Serial No. 43N697 to 43N882 inclusive
CYLINDER HEAD AND VALVE MECHANISM GROUP
1P-4363 CYLINDER HEAD AND VALVE MECHANISM GROUP
1P4363 CYLINDER HEAD AND VALVE MECHANISM GROUP--Side View--Part 1 of 2
Serial No. 43N883-Up and Engine Serial No. 52K1-Up
See Page 29 for Gasket Kit
1P-4363 CYLINDER HEAD AND VALVE MECHANISM GROUP
1P4363 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 43N883-Up and Engine Serial No. 52K1-Up
DAMPER GP
DAMPER & PULLEY GP
1P-1254 DAMPER & PULLEY GP
1P1254 DRIVE PULLEY AND DAMPER GROUP
Serial No. 43N494-Up and Engine Serial No. 52K1-Up
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
8S-5414 DRIVE GP-ACCESSORY
ACCESSORY DRIVE (8S5414 N/S)
Serial No. 43N494 to 43N550 inclusive
8S5115 Drive parts are shown on Page 34
DRIVE GP-ACCESSORY
8S-5414 DRIVE GP-ACCESSORY
ACCESSORY DRIVE (8S5414 N/S)
Serial No. 43N551 to 43N812 inclusive
8S5115 Drive parts are shown on Page 34
DRIVE GP-ACCESSORY
8S-5414 DRIVE GP-ACCESSORY
8S5414 ACCESSORY DRIVE GROUP
Serial No. 43N813-Up and Engine Serial No. 52K1-Up
4N4788 Variable Timing Drive parts are shown on Page 34A
VARIABLE TIMING DRIVE ASSEMBLY
8S-5115 VARIABLE TIMING DRIVE ASSEMBLY
8S5115 VARIABLE TIMING DRIVE ASSEMBLY
Part of 8S5414 Accessory Drive Group shown on Pages 33 and 33A
DRIVE GP-PUMP
9S-0702 DRIVE GP-PUMP
9S702 HYDRAULIC PUMP DRIVE GROUP
Serial No. 43N494-Up and Engine Serial No. 52K1-Up
VARIABLE TIMING DRIVE ASSEMBLY
4N-4788 VARIABLE TIMING DRIVE ASSEMBLY
4N4788 VARIABLE TIMING DRIVE ASSEMBLY
Serial No. 43N813-Up
Part of Accessory Drive shown on Page 33B
DRIVE GP-PUMP
9S-4074 DRIVE GP-PUMP
9S4074 TORQUE CONVERTER OIL PUMP DRIVE GROUP
Serial No. 43N494 to 43N550 inclusive
DRIVE GP-PUMP
9S-4074 DRIVE GP-PUMP
9S4074 TORQUE CONVERTER OIL PUMP DRIVE GROUP
Serial No. 43N551-Up and Engine Serial No. 52K1-Up
DRIVE GP-FAN
FAN DRIVE
9M-3675 FAN DRIVE
FAN DRIVE (9M3675 N/S)
Serial No. 43N497 only
2S2480 Clutch parts are shown on Page 13
FAN DRIVE GROUP
1P-1365 FAN DRIVE GROUP
1P1365 FAN DRIVE GROUP--Field Installation
Serial No. 43N497 Only
Also part of 1P1074 Radiator Core Protective Grid Group listed on Page 162A
DRIVE GP-FAN
1P-1146 DRIVE GP-FAN
1P1146 FAN DRIVE GROUP
Serial No. 43N494 to 43N496 and 43N498-Up and Engine Serial No. 52K1-Up
Also part of 1P1365 Fan Drive Group
VISCOUS FAN DRIVE CLUTCH ASSEMBLY
2S-2480 VISCOUS FAN DRIVE CLUTCH ASSEMBLY
2S2480 VISCOUS FAN DRIVE CLUTCH ASSEMBLY
Part of Fan Drive shown on Page 12
FAN DRIVE GROUP
1P-4319 FAN DRIVE GROUP
1P4319 FAN DRIVE GROUP
Part of 1P3108 Refrigerant Compressor Arrangement
FLYWHEEL GP
FLYWHEEL GP
4S-9173 FLYWHEEL GP
4S9173 FLYWHEEL GROUP--Type 1
Serial No. 43N494-Up and Engine Serial No. 52K1-Up
FLYWHEEL GP
4S-9173 FLYWHEEL GP
4S9173 FLYWHEEL GROUP--Type 2
Serial No. 43N494-Up and Engine Serial No. 52K1-Up
GEAR GP
CAMSHAFT DRIVE GROUP
7S-3586 CAMSHAFT DRIVE GROUP
7S3586 CAMSHAFT DRIVE GROUP
Serial No. 43N494 to 43N696 inclusive
DRIVE GP-CAMSHAFT
2P-1460 DRIVE GP-CAMSHAFT
2P1460 CAMSHAFT DRIVE GROUP
Serial No. 43N697-Up and Engine Serial No. 52K1-Up
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
7M-5645 SUPPORT GP-ENGINE
7M5645 ENGINE SUPPORT GROUP
Serial No. 43N494-Up and Engine Serial No. 52K1-Up
PISTON & ROD GP
CONNECTING ROD AND PISTON GROUP
8S-0813 CONNECTING ROD AND PISTON GROUP
8S813 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 43N494 to 43N550 inclusive
CONNECTING ROD AND PISTON GROUP
8S-0813 CONNECTING ROD AND PISTON GROUP
8S813 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 43N551-Up and Engine Serial No. 52K1-Up
PULLEY GP
DAMPER & PULLEY GP
1P-1254 DAMPER & PULLEY GP
1P1254 DRIVE PULLEY AND DAMPER GROUP
Serial No. 43N494-Up and Engine Serial No. 52K1-Up
PULLEY GROUP
1P-4321 PULLEY GROUP
1P4321 PULLEY GROUP
Part of 1P3108 Refrigerant Compressor Arrangement listed on Page 153Q
VALVE MECHANISM GP
CYLINDER HEAD AND VALVE MECHANISM
1P-4363 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (1P4363 N/S)--Side View--Part 1 of 2
Serial No. 43N494 to 43N696 inclusive
See Page 29 for Gasket Kit
1P-4363 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (1P4363 N/S)--End View--Part 2 of 2
Serial No. 43N494 to 43N696 inclusive
CYLINDER HEAD AND VALVE MECHANISM
1P-4363 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (1P4363 N/S)--Side View--Part 1 of 2
Serial No. 43N697 to 43N882 inclusive
See Page 29 for Gasket Kit
1P-4363 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM (1P4363 N/S)--End View--Part 2 of 2
Serial No. 43N697 to 43N882 inclusive
CYLINDER HEAD AND VALVE MECHANISM GROUP
1P-4363 CYLINDER HEAD AND VALVE MECHANISM GROUP
1P4363 CYLINDER HEAD AND VALVE MECHANISM GROUP--Side View--Part 1 of 2
Serial No. 43N883-Up and Engine Serial No. 52K1-Up
See Page 29 for Gasket Kit
1P-4363 CYLINDER HEAD AND VALVE MECHANISM GROUP
1P4363 CYLINDER HEAD AND VALVE MECHANISM GROUP--End View--Part 2 of 2
Serial No. 43N883-Up and Engine Serial No. 52K1-Up

Information:

(For parts list, see above)

Specifications
Air Compressor And Hydraulic Pump Drive
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Air Compressor Drive Gears<BR> (769B)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Drive Gears For The Air Compressor
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Specifications
Camshaft
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Camshaft And Follower
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Camshaft Drive And Idler Gears
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Camshaft
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Camshaft And Follower
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Drive Gears For The Camshaft
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Disassembly and Assembly
Camshafts
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Special Instruction
Installation Of 2G4553 Thrust Plate{4201, 4209}
Installation Of 2G4553 Thrust Plate{4201, 4209}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Crankshaft
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Crankshaft Front Seal
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Crankshaft Rear Seal Ring And Thrower
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Crankshaft Main Bearings
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Crankshaft
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Service Letter-NACD
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Cylinder Liner
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Cylinder Block
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Cylinder Liner Projection
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Cylinder Liner
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Cylinder Block
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Spacer Plate
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Cylinder Liners
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Crankshaft Main Bearings
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Engine Cylinder Liner Available{1216}
1996/01/15
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Valve Guide And Seat Inserts
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Cylinder Head
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Fuel Injection Equipment
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Valves<BR> (With 2M6414 or 9S9040 Guides)
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Valves<BR> (With 4N3665 Guides)
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Cylinder Head
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Service Letter-APD
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
Disassembly and Assembly
Precombustion Chambers
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Cylinder Head
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves {1105}
1990/05/28
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Correct Washers With Cylinder Head Bolts{1100}
1992/01/20
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Specifications
Vibration Damper
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Vibration Damper
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Disassembly and Assembly
Vibration Damper And Hub
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Accessory Drive
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Drive Gears For Rear Power Take-Off<BR> (No. 16 Motor Grader)
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Disassembly and Assembly
Accessory Drive Housing
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Specifications
Accessory Drive
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Disassembly and Assembly
Accessory Drive Housing
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Specifications
Flywheel
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Flywheel
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Disassembly and Assembly
Flywheel
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Flywheel Housing
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Variable Timing Drive<BR> (630B-631B-633)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Variable Timing Drive
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Rear Power Takeoff Drive Gears<BR> (No. 16 Motor Grader)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Disassembly and Assembly
Timing Gears
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Timing Gear Plate
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Disassembly and Assembly
Crankshaft Rear Seal Ring And Thrower
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Flywheel Housing
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Specifications
Variable Timing Drive<BR> (630B-631B-633)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Variable Timing Drive
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Disassembly and Assembly
Crankshaft Front Seal
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Timing Gear Plate
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Pistons And Rings
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Cylinder Liner
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Crankshaft
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Cylinder Block
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Camshaft
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Camshaft And Follower
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Camshaft Drive And Idler Gears
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Vibration Damper
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Variable Timing Drive<BR> (630B-631B-633)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Variable Timing Drive
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Rear Power Takeoff Drive Gears<BR> (No. 16 Motor Grader)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Air Compressor And Hydraulic Pump Drive
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Air Compressor Drive Gears<BR> (769B)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Disassembly and Assembly
Accessory Drive Housing
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Camshafts
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Vibration Damper And Hub
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Crankshaft Front Seal
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Crankshaft Rear Seal Ring And Thrower
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Oil Pan
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Oil Pan Plate
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Flywheel Housing
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Timing Gear Plate
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Crankshaft Front Seal And Wear Sleeve Permit Crankshafts With Seal Wear To Be Used Again{1151,1160}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Correct Washers With Cylinder Head Bolts{1100}
1992/01/20
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Oil Pan
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Oil Pan Plate
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Pistons And Rings
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Piston And Rings
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Connecting Rod
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Disassembly and Assembly
Connecting Rod Bearings
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Pistons
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Disassembly and Assembly
Vibration Damper And Hub
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Specifications
Valves
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23
Do Not Use Heli-Coils&reg; To Repair Rocker Arm Assemblies On 5.4&quot; Bore Engines {1123}
1988/12/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

1978 CAT 825B
USD $16,030 
1978 CAT 825B

Alaskan Equipment Sales
1970 CAT 825B
USD $16,000 
1970 CAT 825B

RMB EQUIPMENT
Middleville, Michigan
1971 CAT 825B
USD $30,000 
1971 CAT 825B

Job Rentals & Sales LLC
Jeffersonville, Indiana
1973 CAT 825B
Call 
1973 CAT 825B

Ran Equipment
Memphis, Tennessee
1985 CAT 825B
USD $23,902 
1985 CAT 825B

ECOGLOBAL 21
CATALUNA, SALLENT, Spain
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.