8S5174 FUEL PUMP HOUSING GROUP--Type 2 Serial No. 43N802-Up. Part of 9S685 Fuel Pump Housing and Governor Group shown on Pages 37A and 37B 825B

FUEL SYSTEM

PUMP GP-FUEL INJECTION

0. 8S-5174 FUEL PUMP

LINES GP-FUEL INJECTION

1. 9S-0689 MISCELLANE
2. 9S-0689 MISCELLANE
3. 9S-0689 MISCELLANE
4. 9S-0689 MISCELLANE

COOLING SYSTEM

COOLER GP

5. 9M-3223 FILTER GP-
6. 9M-3223 FILTER GP-

LUBRICATION SYSTEM

FILTER GP-ENGINE OIL

7. 9M-3202 OIL FILTER

LINES GP-ENGINE OIL

8. 7S-3587 LINES GP-O
9. 7S-3587 LINES GP-O
0. INFORMATION

SOIL COMPACTOR 825B SOIL COMPACTOR 43N
825B COMPACTOR 43N00494-UP (MACHINE) POWERED BY D343 ENGINE UEG0263S 825B 43N (1969)

FUEL SYSTEM

PUMP GP-FUEL INJECTION

9S-0685 PUMP & GOVERNOR GP

SERVICE METER

8S-5174 FUEL PUMP HOUSING GROUP

#UEG0263S0120

8S-5174: FUEL PUMP HOUSING GROUP

FUEL PUMP HOUSING GROUP

8S5174 FUEL PUMP HOUSING GROUP--Type 2
Serial No. 43N802-Up. Part of 9S685 Fuel Pump Housing and
Governor Group shown on Pages 37A and 37B

c207087 UEG0263S

8S5174 FUEL PUMP HOUSING GROUP Parts scheme

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8F-0394	[1]	SPRING
2.	1S-9480	[1]	PIN
3.	1B-2790	[1]	BOLT
	3B-4505	[1]	LOCKWASHER
	4B-4277	[1]	WASHER
4.	1S-9481	[1]	COVER
	1S-9546	[1]	GASKET
5.	8S-3656	[6]	PLUNGER AND BARREL ASSEM.
6.	1M-1077	[6]	SEAL
7.	1S-8634	[6]	SPRING
8.	2S-1631	[6]	CHECK VALVE
9.	8S-3653	[6]	BONNET
10.	8H-9204	[6]	WASHER
11.	2M-4314	[6]	BUSHING
12.	1M-3506	[6]	RING
13.	5M-2697	[6]	SPACER (.170" Thick)
	2M-4208	[6]	SPACER (.174" Thick)
	2M-4209	[6]	SPACER (.178" Thick)
	2M-4210	[6]	SPACER (.182" Thick)
	2M-4211	[6]	SPACER (.186" Thick)
	2M-4212	[6]	SPACER (.190" Thick)
	5M-2691	[6]	SPACER (.194" Thick)
	5S-7189	[6]	SPACER (.198" Thick)
14.	1S-7592	[6]	SPRING
15.	8S-3652	[6]	WASHER
16.	3S-9736	[6]	LIFTER ASSEM.
17.	2P-8617	[1]	RACK
18.	2S-7461	[1]	PLATE
19.	0L-0472	[1]	BOLT
	2H-3504	[1]	LOCK
20.	1P-7959	[1]	GEAR ASSEM. (72 Teeth)
21.	2H-2255	[1]	DOWEL
22.	3N-2070	[1]	SPRING
23.	8S-4775	[1]	CAMSHAFT ASSEM.
24.	2H-2255	[1]	DOWEL
25.	8S-5016	[1]	HOUSING ASSEM.
26.	1S-7103	[1]	BEARING
27.	4M-1474	[3]	PIN
28.	0T-0200	[1]	PLUG
29.	9S-4160	[1]	BEARING
30.	9S-4197	[1]	BUSHING
31.	1P-0234	[6]	DOWEL
	1P-0232	[6]	BALL
32.	4F-6024	[2]	DOWEL
33.	1S-1953	[1]	BEARING
34.	1S-7101	[2]	BEARING
35.	5M-6214	[1]	PLUG

#UEG0263S0121

9S-0689: MISCELLANEOUS GP-FUEL INJ

MISCELLANEOUS GP-FUEL INJ

FUEL INJECTION VALVES AND LINES (9S689 N/S)
Serial No. 43N494 to 43N542 inclusive

c108230 UEG0263S

9S0689 MISCELLANEOUS GP-FUEL INJ Parts scheme

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-1059	[6]	NOZZLE ASSEM.
2.	5M-2853	[6]	BODY
3.	5M-2852	[6]	NUT
4.		[6]	LINE ASSEM.
5.	8S-9306	[1]	LINE ASSEM. (No. 6)
6.	8S-9305	[1]	LINE ASSEM. (No. 5)
7.	8S-8817	[2]	DAMPER
8.	9S-2299	[2]	STRIP
9.	5M-5690	[4]	DAMPER
10.	8S-9304	[1]	LINE ASSEM. (No. 4)
11.	1B-4202	[6]	NUT
12.	3B-4505	[8]	LOCKWASHER
13.	8M-3128	[6]	ADAPTER
	5M-1868	[6]	SEAL
14.	8S-9303	[1]	LINE ASSEM. (No. 3)
15.	1B-7182	[2]	BOLT
16.	9S-4200	[2]	CLIP
17.	8S-9301	[1]	LINE ASSEM. (No. 1)
18.	8S-9302	[1]	LINE ASSEM. (No. 2)
19.	3B-8995	[2]	FITTING
	1F-1344	[2]	NUT
			(1 in each 3B8995 Fitting)
20.	0L-2072	[1]	CLIP
21.	4S-8385 H		TUBE (.25" O.D.) 25.58"
22.	6B-9673	[1]	FITTING
	1F-1344	[1]	NUT
			(Part of 6B9673 Fitting)
23.	3B-8998	[1]	FITTING
	1F-1344	[1]	NUT
			(Part of 3B8998 Fitting)
24.	9S-1272	[1]	TUBE (Drain)
25.	4H-8878	[2]	CLIP
26.	4S-8385 H		TUBE 1.25"O.D.-Air Breed) 37.12"
	5B-9603	[3]	BOLT (5" long)
	5F-4899	[1]	BOLT (5.5" long)
	3B-4506	[4]	LOCKWASHER
	8M-4389	[1]	SEAL (.799" I.D. Supply)
	8M-5254	[1]	SEAL (1.234" I.D. Drain)
			(Not shown-Fuel Pump to Block)
	H		ORDER BY THE FOOT

#UEG0263S0122

9S-0689: MISCELLANEOUS GP-FUEL INJ

MISCELLANEOUS GP-FUEL INJ

FUEL INJECTION VALVES AND LINES (9S689 N/S)
Serial No. 43N543 to 43N812 inclusive

c110927 UEG0263S

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-1059	[6]	NOZZLE ASSEM.
2.	5M-2853	[6]	BODY
3.	5M-2852	[6]	NUT
4.	1S-2075	[6]	LINE ASSEM.
5.	8S-9306	[1]	LINE ASSEM. (No. 6)
6.	8S-9305	[1]	LINE ASSEM. (No. 5)
7.	8S-8817	[2]	DAMPER
8.	9S-2299	[2]	STRIP
9.	5M-5690	[4]	DAMPER
10.	8S-9304	[1]	LINE ASSEM. (No. 4)
11.	1B-4202	[6]	NUT
12.	3B-4505	[10]	LOCKWASHER
13.	8M-3128	[6]	ADAPTER
	5M-1868	[6]	SEAL
14.	8S-9303	[1]	LINE ASSEM. (No. 3)
15.	1B-7182	[2]	BOLT
16.	9S-4200	[2]	CLIP
17.	8S-9301	[1]	LINE ASSEM. (No. 1)
18.	8S-9302	[1]	LINE ASSEM. (No. 2)
19.	3B-8995	[2]	FITTING
	1F-1344	[2]	NUT (1 in each 3B8995 Fitting)
20.	0L-2072	[1]	CLIP
21.	4S-8385 H		TUBE (.25" O.D.) 25.58"
22.	6B-9673	[1]	FITTING
	1F-1344	[1]	NUT (Part of 6B9673 Fitting)
23.	3B-8998	[1]	FITTING
	1F-1344	[1]	NUT (Part of 3B8998 Fitting)
24.	9S-1272	[1]	TUBE (Drain)
25.	4H-8878	[2]	CLIP
26.	4S-8385 H		TUBE (.25" O.D.-Air Breed) 37.12"
27.	5M-5690	[4]	DAMPER
28.	9S-2299	[2]	STRIP
29.	1D-4716	[2]	NUT
	1P-6909	[2]	STRIP ASSEM.
30.	9S-2299	[1]	STRIP
31.	9S-8586	[1]	STUD
	5B-9603	[3]	BOLT (5" Long)
	5F-4899	[1]	BOLT (5.5" Long)
	3B-4506	[4]	LOCKWASHER
	8M-4389	[1]	SEAL (.799" I.D.-Supply)
	8M-5254	[1]	SEAL (1.234" I.D.-Drain)
			(Not shown-Fuel Pump to Block)
	H		ORDER BY THE FOOT

#UEG0263S0123

9S-0689: MISCELLANEOUS GP-FUEL INJ

MISCELLANEOUS GP-FUEL INJ

9S689 FUEL INJECTION VALVES AND LINES GROUP
Serial No. 43N813-Up and Engine Serial No. 52K1 to 52K2470 inclusive

c167387 UEG0263S

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-1059	[6]	NOZZLE ASSEM.
2.	5M-2853	[6]	BODY
3.	5M-2852 C	[6]	NUT
4.	1S-2075	[6]	LINE ASSEM.
5.	8S-9306	[1]	LINE ASSEM. (No. 6)
6.	8S-9305	[1]	LINE ASSEM. (No. 5)
7.	8S-8817	[2]	DAMPER
8.	9S-2299 C	[2]	PLATE
9.	5M-5690	[4]	DAMPER
10.	8S-9304	[1]	LINE ASSEM. (No. 4)
11.	1B-4202	[6]	NUT
12.	3B-4505	[10]	LOCKWASHER
13.	8M-3128	[6]	ADAPTER
	5M-1868	[6]	SEAL
14.	8S-9303	[1]	LINE ASSEM. (No. 3)
15.	1B-7182	[2]	BOLT
16.	9S-4200	[2]	CLIP
17.	8S-9301	[1]	LINE ASSEM. (No. 1)
18.	8S-9302	[1]	LINE ASSEM. (No. 2)
19.	3B-8995	[2]	FITTING
	1F-1344	[1]	NUT
20.	0L-2072	[1]	CLIP
21.	2P-9608 CH		TUBE ASSEM. 60.75 cm(23.92 in.)
22.	5K-9243 C	[2]	FITTING
23.	4B-8756 C	[2]	NUT
24.	9S-1272	[1]	TUBE (Drain)
25.	4H-8878	[2]	CLIP
26.	5P-1198 H		TUBE 94.28 cm(37.12 in.)
			6.35 mm(.25 in. O.D.-Air Breed)
27.	1D-4716	[2]	NUT
28.	1P-6909	[2]	STRIP ASSEM.
	9S-2299	[1]	STRIP
29.	9S-8586	[1]	STUD
30.	9N-0577 C	[4]	DAMPER
31.	2M-5007 C	[2]	PLATE
	5B-9603 C	[3]	BOLT 12.70 mm(5 in.) long
	5F-4899	[1]	BOLT 13.97 mm(5.5 in.) long
	3B-4506	[4]	LOCKWASHER
	8M-4389 CJ	[1]	SEAL 20.30 mm(.799 in.) I.D.
			(Supply)
	8M-5254 C	[1]	SEAL 31.35 mm(1.234 in.) I.D.
			(Drain)
	C		INDICATES CHANGE
	J		NOT SHOWN-FUEL PUMP TO BLOCK
	H		ORDER BY THE CENTIMETRE

#UEG0263S0124

9S-0689: MISCELLANEOUS GP-FUEL INJ

MISCELLANEOUS GP-FUEL INJ

9S689 FUEL INJECTION VALVES AND LINES GROUP
Engine Serial No. 52K2471-Up

c173657 UEG0263S

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-1831 C	[6]	NOZZLE ASSEM.
2.	5M-2853	[6]	BODY
3.	5M-2852	[6]	NUT
4.	1S-2075	[6]	LINE ASSEM.
5.	8S-9306	[1]	LINE ASSEM. (No. 6)
6.	8S-9305	[1]	LINE ASSEM. (No. 5)
7.	8S-8817	[2]	DAMPER
8.	9S-2299	[2]	PLATE
9.	5M-5690	[4]	DAMPER
10.	8S-9304	[1]	LINE ASSEM. (No. 4)
11.	1B-4202	[6]	NUT
12.	3B-4505	[10]	LOCKWASHER
13.	8M-3128	[6]	ADAPTER
	5M-1868	[6]	SEAL
14.	8S-9303	[1]	LINE ASSEM. (No. 3)
15.	1B-7182	[2]	BOLT
16.	9S-4200	[2]	CLIP
17.	8S-9301	[1]	LINE ASSEM. (No. 1)
18.	8S-9302	[1]	LINE ASSEM. (No. 2)
19.	3B-8995	[2]	FITTING
	1F-1344	[1]	NUT
20.	0L-2072	[1]	CLIP
21.	5P-1198 CH		TUBE ASSEM. 61.37 cm(24.16 in.)
22.	5K-9243	[2]	FITTING
23.	4B-8756	[2]	NUT
24.	9S-1272	[1]	TUBE (Drain)
25.	4H-8878	[2]	CLIP
26.	5P-1198 H		TUBE 94.28 cm(37.12 in.)
			6.35 mm(.25 in. O.D.-Air Breed)
27.	1D-4716	[2]	NUT
28.	1P-6909	[2]	STRIP ASSEM.
	9S-2299	[1]	STRIP
29.	9S-8586	[1]	STUD
30.	9N-0577	[4]	DAMPER
31.	2M-5007	[2]	PLATE
	5B-9603 J	[3]	BOLT 12.70 mm(5 in.) long
	5F-4899 J	[1]	BOLT 13.97 mm(5.5 in.) long
	3B-4506 J	[4]	LOCKWASHER
	8M-4389 J	[1]	SEAL 20.30 mm(.799 in.) I.D.
			(Supply)
	8M-5254 J	[1]	SEAL 31.35 mm(1.234 in.) I.D.
			(Drain)
	C		INDICATES CHANGE
	J		NOT SHOWN-FUEL PUMP TO BLOCK
	H		ORDER BY THE CENTIMETER

#UEG0263S0125

9M-3223: FILTER GP-ENGINE OIL

FILTER GP-ENGINE OIL

9M3223 OIL FILTER GROUP
Serial No. 43N494 to 43N965 inclusive
9M3202 Base parts are shown on Page 47

c103591 UEG0263S

9M3223 FILTER GP-ENGINE OIL Parts scheme

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9M-3657	[1]	CLAMP (REAR)
6F-9165	[1]	CLAMP (FRONT)
0S-1588	[2]	BOLT
3B-4506	[2]	LOCKWASHER
8M-5661	[1]	SEAL
9M-3202 Y	[1]	BASE ASSEM.
		(SEE SEPARATE ILLUSTRATION)
2M-9180	[2]	COVER ASSEM.
1K-0505	[1]	WASHER
3H-4970	[1]	SEAL
2M-9140	[1]	COVER
6F-9163	[1]	GASKET
0V-0294	[1]	SPRING
6H-9922	[1]	RETAINER
7F-7691	[1]	CLIP
2M-9179	[1]	SCREW
8S-4777	[2]	CASE
5S-0485	[2]	ELEMENT ASSEM. (DISPOSABLE)
9M-0452	[2]	STUD
6F-9163	[2]	GASKET
6H-9921	[2]	ADAPTER
1B-4203	[6]	NUT (.375" N.F. THREAD)
		-OR-
1D-4717	[6]	NUT (.375" N.C. THREAD)
3B-4506	[6]	LOCKWASHER
0S-1588	[1]	BOLT
3B-4506	[1]	LOCKWASHER
1M-7360	[1]	CLAMP
8M-5249	[1]	SEAL
9M-4202	[2]	PLUG
4B-8407	[2]	WASHER
Y		SEPARATE ILLUSTRATION

#UEG0263S0126

9M-3223: FILTER GP-ENGINE OIL

FILTER GP-ENGINE OIL

9M3223 OIL FILTER GROUP
Serial No. 43N966-Up and Engine Serial No. 42K1-Up

c205136 UEG0263S

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
6F-9165 C	[1]	CLAMP (REAR)
6F-9165	[1]	CLAMP (FRONT)
0S-1588	[2]	BOLT
3B-4506	[2]	LOCKWASHER
8M-5661	[1]	SEAL
9M-3202 Y	[1]	BASE ASSEM.
		(SEPARATE ILLUSTRATION)
2M-9180	[2]	COVER ASSEM.
1K-0505	[1]	WASHER
3H-4970	[1]	SEAL
2M-9140	[1]	COVER
6F-9163	[1]	GASKET
0V-0294	[1]	SPRING
6H-9922	[1]	RETAINER
7F-7691	[1]	CLIP
2M-9179	[1]	SCREW
8S-4777	[2]	CASE
5S-0485	[2]	ELEMENT ASSEM. (DISPOSABLE)
7M-6013 C	[2]	STUD
6F-9163	[2]	GASKET
6H-9921	[2]	ADAPTER
1D-4717	[6]	NUT (.375" N.C. THREAD)
3B-4506	[6]	LOCKWASHER
0S-1588	[1]	BOLT
3B-4506	[1]	LOCKWASHER
1M-7360	[1]	CLAMP
8M-5249	[1]	SEAL
9M-4202	[2]	PLUG
4B-8407	[2]	WASHER
C		INDICATES CHANGE
Y		SEPARATE ILLUSTRATION

#UEG0263S0127

9M-3202: OIL FILTER BASE ASSEMBLY

OIL FILTER BASE ASSEMBLY

9M3202 OIL FILTER BASE ASSEMBLY
Part of 9M3223 Oil Filter Group shown on Pages 46D & 47

c106002 UEG0263S

9M3202 OIL FILTER BASE ASSEMBLY Parts scheme

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
		[1]	PLUNGER
		[1]	SPRING
		[1]	RETAINER
		[2]	BOLT
		[2]	LOCKWASHER
		[1]	SLEEVE
		[1]	PLUG
		[1]	SPRING
		[1]	PLUNGER
		[1]	PLUG
		[1]	PLUG
		[1]	PLUNGER
		[1]	SPRING
		[1]	GASKET
		[1]	COVER

#UEG0263S0128

7S-3587: LINES GP-OIL

LINES GP-OIL

OIL LINES (7S3587 N/S)
Serial No. 43N494 to 43N550 inclusive

c129024 UEG0263S

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8F-8513	[1]	CLIP (Short)
2B-3243	[1]	CLIP (Long)
0S-1617	[2]	BOLT
5H-5652	[2]	LOCK
0L-2070	[2]	BOLT
0L-0364	[2]	LOCK
0L-1351	[1]	BOLT
0L-0364	[1]	LOCK
1B-4203	[1]	NUT
0L-0364	[1]	LOCK
2M-1503	[1]	COVER
0S-1591	[1]	BOLT
0L-0364	[1]	LOCK
0S-1617	[1]	BOLT (.75" long)
4B-3388	[1]	BOLT (1.123" long)
5H-5652	[2]	LOCK
2B-0947	[1]	BOLT
2B-1738	[1]	LOCK
		USE 7M7260 GASKET SOLUTION
3B-1915	[2]	BOLT
0L-0364	[2]	LOCK
8M-5266	[1]	SEAL
1A-1460	[2]	BOLT
3B-4508	[2]	LOCKWASHER
1S-1613	[1]	ADAPTER ASSEM.
9M-3589	[1]	TUBE ASSEM.
		(Turbocharger Oil Supply)
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1S-6595	[1]	GASKET
8S-7605	[1]	GAUGE ASSEM.
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1S-4810	[1]	GASKET
9S-8986	[1]	TUBE ASSEM.
		(Turbocharger Oil Drain)
9S-0730	[1]	JOINT ASSEM.
0S-0509	[1]	BOLT
1D-4717	[1]	NUT
3B-4506	[1]	LOCKWASHER
4B-4278	[1]	WASHER
4B-0418	[1]	CLIP
1P-0296	[1]	TUBE ASSEM.
		(Camshaft Oil Supply)
0S-0509	[1]	BOLT
3B-4506	[1]	LOCKWASHER
4B-4278	[1]	WASHER
3S-7608	[1]	CLIP
1F-6068	[1]	FITTING
8F-9362	[1]	NUT
		(Part of 1F6068 Fitting)
9S-8985	[1]	TUBE ASSEM.
8S-7602	[1]	TUBE ASSEM.
2M-9189	[1]	GASKET
1S-8890	[1]	ELBOW
2M-9189	[1]	GASKET
3B-6555	[1]	ELBOW
5M-2669	[1]	PLUG
9H-6687	[1]	PIN
		(Parts of Adapter Assem. 1S1613)
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
2A-4522	[1]	COVER
2A-4448	[1]	GASKET
8S-6698	[1]	SUPPORT
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
4M-4460	[1]	GASKET
1D-4566	[1]	BOLT 3.50" long)
0L-1329	[1]	BOLT (3" long)
3B-4508	[2]	LOCKWASHER
6B-0689	[1]	NIPPLE
9M-0164	[1]	CLAMP
3K-8660	[1]	HOSE

#UEG0263S0129

7S-3587: LINES GP-OIL

LINES GP-OIL

7S3587 OIL LINES GROUP
Serial No. 43N551 to 43N1114 inclusive

c116896 UEG0263S

For full view, you need register

Parts for your 825B SOIL COMPACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8F-8513	[1]	CLIP (Short)
2B-3243	[1]	CLIP (Long)
0S-1617	[2]	BOLT
5H-5652	[2]	LOCK
0L-2070	[2]	BOLT
0L-0364	[2]	LOCK
0L-1351	[1]	BOLT
0L-0364	[1]	LOCK
1B-4203	[1]	NUT
0L-0364	[1]	LOCK
2M-1503	[1]	COVER
0S-1591	[1]	BOLT
0L-0364	[1]	LOCK
0S-1617	[1]	BOLT (.75" long)
4B-3388	[1]	BOLT (1.125" long)
5H-5652	[2]	LOCK
2B-0947	[1]	BOLT
2B-1738	[1]	LOCK
		USE 7M7260 GASKET SOLUTION
3B-1915	[2]	BOLT
0L-0364	[2]	LOCK
8M-5266	[1]	SEAL
0S-1585	[2]	BOLT
3B-4508	[2]	LOCKWASHER
9S-9994	[1]	ADAPTER ASSEM.
9M-3589	[1]	TUBE ASSEM.
		(Turbocharger Oil Supply)
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1S-6595	[1]	GASKET
8S-7605	[1]	GAUGE ASSEM.
1S-4810	[1]	GASKET
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
9S-8986	[1]	TUBE ASSEM.
9S-0730	[1]	JOINT ASSEM.
2P-9773 C	[2]	SEAL
		(Part of 9S730 Assem.)
0S-0509	[1]	BOLT
1D-4717	[1]	NUT
3B-4506	[1]	LOCKWASHER
4B-4278	[1]	WASHER
4B-0418	[1]	CLIP
1P-0296	[1]	TUBE ASSEM.
		(Camshaft Oil Supply)
0S-0509	[1]	BOLT
3B-4506	[1]	LOCKWASHER
4B-4278	[1]	WASHER
3S-7608	[1]	CLIP
1F-6068	[1]	FITTING
8F-9362	[1]	NUT
		(Part of 1F6068 Fitting)
9S-8985	[1]	TUBE ASSEM.
8S-7602	[1]	TUBE ASSEM.
2M-9189	[2]	GASKET
1S-8890	[1]	ELBOW
1D-4566	[1]	BOLT (3.50 in long)
		-OR-
1A-1460 C	[1]	BOLT (2 in long)
0L-1329	[1]	BOLT (3 in long)
		-OR-
7B-3235 C	[1]	BOLT (1.375 in long)
3B-4508	[2]	LOCKWASHER
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
2A-4522	[1]	COVER
2A-4448	[1]	GASKET
8S-6698	[1]	SUPPORT
4M-4460	[1]	GASKET
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
5M-2669	[1]	PLUG
9H-6687	[1]	PIN
		(Parts of 9S9994 Assem.)
3B-6555	[1]	ELBOW
6B-0689	[1]	NIPPLE
9M-0164	[1]	CLAMP
3K-8660	[1]	HOSE
C		INDICATES CHANGE

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Special Instruction

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}

Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Specifications

Governor (All vehicles except No. 16 Motor Grader)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T

Governor (No. 16 Motor Grader only)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T

Fuel Transfer Pump (5M6488)
5.4" BORE SIX CYLINDER VEHICULAR ENGINE (FOR ENGINES PRIOR T

Fuel Injection Equipment
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP

Governor
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP

Fuel Transfer Pump (7S4430, 7S5445 and 4N4864)
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP

Variable Drive For The Fuel Injection Pump Camshaft (8S5115)
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP

Variable Drive For The Fuel Injection Pump Camshaft (4N4788)
5.4" BORE SIX CYLINDER VEHICLE ENGINE(WITH CYLINDER BLOCK SP

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Reuse And Salvage Guidelines

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Disassembly and Assembly

Fuel Transfer Pump
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES

Governor
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES

Fuel Injection Pump Housing And Governor
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES

Fuel Injection Pump Housing
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES

Variable Timing Unit
824-834 TRACTOR AND 825-835 COMPACTOR ENGINES

Service Magazine

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02

Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03

Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20

Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17

Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14

With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31

Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

New Nozzle Assembly Used In Fuel Injection Valves{1254}
1978/09/04

New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25

Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16

New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04

Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18

Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 825B :

8S-5174 FUEL PUMP HOUSING GROUP

8S-5177 FILTER GP-FUEL

4N-4873 FUEL TRANSFER PUMP GROUP

6N-9149 PUMP GP-FUEL TRANSFER

4N-4873 FUEL TRANSFER PUMP GROUP

7S-5445 FUEL TRANSFER PUMP GROUP

8S-7608 FILTER GP-PRIMARY FUEL

9S-0689 MISCELLANEOUS GP-FUEL INJ

9M-3223 FILTER GP-ENGINE OIL

9M-3202 OIL FILTER BASE ASSEMBLY

7S-3587 LINES GP-OIL

Truck sale:

USD $16,030

1978 CAT 825B

Alaskan Equipment Sales

USD $16,000

1970 CAT 825B

RMB EQUIPMENT
Middleville, Michigan

USD $30,000

1971 CAT 825B

Job Rentals & Sales LLC
Jeffersonville, Indiana

Call

1973 CAT 825B

Ran Equipment
Memphis, Tennessee

USD $23,902

1985 CAT 825B

ECOGLOBAL 21
CATALUNA, SALLENT, Spain