AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7S9333 GOVERNOR GROUP Part of Fuel Pump Housing and Governor shown on Page 31 815 SOIL COMPACTOR


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
PUMP GP-FUEL PRIMING
TORQUE CONTROL GP
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
FILTER GP-FUEL
PUMP GP-FUEL INJECTION
LINES GP-FUEL

SOIL COMPACTOR 815 SOIL COMPACTOR 91P
 815 COMPACTOR 91P00001-00527 (MACHINE) UEG0266S 815 91P   (1970)

FUEL SYSTEM

GOVERNOR GP
FUEL PUMP HOUSING AND GOVERNOR
7S-6740 FUEL PUMP HOUSING AND GOVERNOR
GOVERNOR GROUP
7S-9333 GOVERNOR GROUP
 

#UEG0266S0060
 

7S-9333: GOVERNOR GROUP

7S9333 GOVERNOR GROUP
Part of Fuel Pump Housing and Governor shown on Page 31
c131569 UEG0266S
7S9333 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4F-4585 [1] PLUG  
  8S-0134 [1] BEARING  
    (Parts of Housing Assem. 9S1735)
  8S-8950 [1] SCREW (Low Idle)  
  1B-2790 [3] BOLT (Plain)  
  6H-5636 [2] BOLT (Drilled)  
  7S-8828 [1] COVER ASSEM.  
  4S-8513 [1] GASKET  
  5S-1221 [1] SPRING  
  7S-9331 [1] SCREW (High Idle)  
  2S-7316 [1] DOWEL  
    (Part of Cover Assem. 7S8828)
  1S-4741 [1] CYLINDER  
  9S-4468 [1] BOLT  
  2F-4159 [1] LOCK  
  9S-0798 [4] BEARING  
  9S-4671 [1] SEAL  
    (Parts of Housing Assem. 9S1735)
  9M-4789 [1] SHAFT  
  5S-5060 [1] WEIGHT ASSEM.  
  2S-0101 [2] WEIGHT  
  1S-5440 [2] DOWEL  
    (Parts of Weight Assem. 5S5060)
  9S-4673 [1] BAND ASSEM.  
  3K-0810 [1] RING  
  8M-8739 [1] BOLT  
  5S-9607 [1] NUT  
  8L-4155 [1] SCREW  
  8L-4154 [1] COLLAR  
  9M-4704 [1] SCREW  
  8H-9181 [1] SPRING  
  9M-6302 [2] WASHER  
  9M-6303 [1] SPRING  
  2S-0008 [1] SEAT  
  3S-9639 [1] SEAT ASSEM.  
  8M-8726 [1] DOWEL  
  2S-0007 [1] SLEEVE  
  7M-7219 [1] BEARING  
  8M-8993 [1] RING  
  7M-7193 [2] RACE  
  9M-1216 [1] PLUNGER  
  2S-7905 [1] PLUG  
    (Part of 9S1735 Assem.)
  1S-9312 [1] SPRING  
  9F-4522 [1] GASKET  
  7L-8777 [1] SLEEVE  
  9M-4690 [1] PLUG  
  9S-4466 [1] LEVER ASSEM.  
  9M-9788 [1] PLUNGER  
  5S-9635 [1] SPRING  
  5H-1351 [1] PIN  
  9S-1735 [1] HOUSING ASSEM.  
  8M-8403 [1] GUIDE  
    (Part of Housing Assem. 9S1735)
  7S-8447 [1] PISTON AND VALVE ASSEM.  
  7B-8105 [1] LOCK  
  8M-8997 [1] SEAL  
  0S-1615 [3] BOLT  
  9M-6293 [1] LOCK  
 

#UEG0266S0061
 

7S-7813: RACK STOP

RACK STOP (7S7813 N/S)
Serial No. 91P1 to 91P235 inclusive
c101481 UEG0266S
7S7813 RACK STOP Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9068 [1] BAR  
2. 9M-6292 [1] LOCK  
3. 0S-1614 [2] BOLT  
 

#UEG0266S0062
 

9H-2256: PUMP ASSEMBLY

9H2256 PUMP ASSEMBLY
Part of 7S1251 Fuel Priming Pump Group shown on Page 35
c147588 UEG0266S
9H2256 PUMP ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-6718 [ 2] BALL  
2. 1H-1023 [ 2] SEAL  
3. 1M-6781 [ 2] NUT  
 

#UEG0266S0063
 

9S-3312: RACK STOP

RACK STOP (9S3312 N/S)
Serial No. 91P236-Up
c106207 UEG0266S
9S3312 RACK STOP Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. C [1] BAR  
2. [1] LOCK  
3. [2] BOLT  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEG0266S0064
 

7S-1251: FUEL PRIMING PUMP GROUP

7S1251 FUEL PRIMING PUMP GROUP
9H2256 Pump parts are shown on Page 34B
c145935 UEG0266S
7S1251 FUEL PRIMING PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-0210 [1] TUBE (Outlet)  
2. 3B-8998 [3] FITTING  
  1F-1344 [1] NUT  
3. 9H-2256 Y [1] PUMP GROUP (Fuel Priming)  
4. 8S-0211 [1] TUBE (Inlet)  
5. 1H-7922 [1] FITTING  
  1F-1344 [1] NUT  
6. 2B-2695 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
7. 7S-1129 [1] BRACKET  
  Y   SEPARATE ILLUSTRATION
 

#UEG0266S0065
 

7S-5445: FUEL TRANSFER PUMP GROUP

7S5445 FUEL TRANSFER PUMP GROUP
c103279 UEG0266S
7S5445 FUEL TRANSFER PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-8616 [1] NUT  
2. 8H-9806 [1] GEAR (11 Teeth)  
3. 6J-2419 [2] SEAL  
4. 7S-4439 [1] RING  
5. 7S-4434 [1] BODY ASSEM.  
6. 8F-6058 [1] BEARING  
7. 2S-6838 [1] SHAFT  
    (Parts of 7S4434 Body Assem.)
8. 8S-4368 [1] GEAR (Idler-10 Teeth)  
9. 8S-5986 [1] COVER ASSEM.  
10. 8S-5575 [1] SEAL  
11. 7S-4433 [2] FERRULE  
    (Parts of 8S5986 Cover Assem.)
12. 7S-6701 [2] SCREW  
13. 8S-4373 [1] SHAFT ASSEM.  
14. [1] GEAR (Idler-10 Teeth)  
    (Part of 8S4373 Shaft Assem.)
15. 9F-6641 [4] SCREW  
16. 4B-3388 H [2] BOLT  
17. 3B-4505 H [2] LOCKWASHER  
18. 7S-2374 [1] GASKET  
19. 8S-4375 [1] CAGE ASSEM.  
20. 8F-6058 [1] BEARING  
21. 4S-7756 [2] SEAL  
    (Parts of 8S4375 Cage Assem.)
22. 3H-1489 [1] KEY  
  H   NOT PART OF 7S5445 TRANSFER PU
 

#UEG0266S0066
 

FUEL FILTER

FUEL FILTER
c109285 UEG0266S
None FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-4015 [1] PLUNGER ASSEM.  
2. 4S-6526 [1] SPRING  
3. 9F-6580 [2] BOLT  
  8M-6701 [2] WASHER  
4. 5S-9605 [1] HOUSING  
  5S-9611 [1] GASKET  
5. 7F-3901 [1] SEAT  
6. 2A-1927 [1] NEEDLE ASSEM.  
7. 5S-9636 [1] BASE ASSEM.  
8. 5S-9060 [1] GASKET  
9. 5M-6214 [3] PLUG  
10. 9F-2247 [1] PLUG  
11. 5S-6333 [1] ADAPTER  
12. 1B-9575 [3] BOLT  
  8F-7242 [3] WASHER  
13. 9S-4167 [1] STUD  
    (Parts of 5S9636 Base Assem.)
14. 1D-4538 [3] BOLT  
15. 8F-7242 [5] WASHER  
16. 4B-3388 [2] BOLT  
17. 5S-9020 [1] GASKET  
18. 8H-9402 [1] ADAPTER  
  9H-4557 [2] SEAL  
19. 1P-2299 [1] FILTER ASSEM. (Fuel)  
 

#UEG0266S0067
 

5S-9076: FUEL PUMP HOUSING GROUP

5S9076 FUEL PUMP HOUSING GROUP
Part of Fuel Pump Housing and Governor shown on Page 31
c112420 UEG0266S
5S9076 FUEL PUMP HOUSING GROUP Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-9735 [ 6] LIFTER ASSEM.  
2. 9H-5797 [ 6] PLUNGER AND BARREL ASSEM.  
3. 9H-5729 WASHER  
4. 1M-3506 [ 6] RING  
5. 4M-0411 [ 6] BONNET  
6. 1M-1077 [ 6] SEAL  
7. 8H-9204 [ 6] WASHER  
8. 2M-4314 [ 6] BUSHING  
9. 9B-1363 [ 6] SPRING  
10. 9H-5746 [ 6] CHECK  
11. 2M-4208 [ 6] SPACER (.174" Thick)  
  2M-4209 [ 6] SPACER (.178" Thick)  
  2M-4210 [ 6] SPACER (.182" Thick)  
  2M-4211 [ 6] SPACER (.186" Thick)  
  2M-4212 [ 6] SPACER (.190" Thick)  
12. 1S-0206 [ 6] SPRING  
13. 5S-9051 [ 1] HOUSING ASSEM.  
14. 4M-1474 [ 3] PIN  
15. 1P-0232 [ 6] BALL  
16. 1P-0234 [ 6] DOWEL  
17. 1P-0231 [ 6] BALL  
18. 1P-0233 [ 6] DOWEL  
19. 9H-1296 [ 1] BEARING  
20. 9H-1284 [ 1] BEARING  
21. 1M-1226 [ 1] BEARING  
22. 2S-7905 [ 1] PLUG  
23. 3D-4603 [ 1] PLUG  
24. 2A-3746 [ 1] PLUG  
25. 1S-1953 [ 1] BEARING  
26. 2M-8604 [ 1] BEARING  
27. 4F-6024 [ 2] DOWEL  
28. 1M-0101 [ 1] CAMSHAFT ASSEM.  
29. 1M-0690 [ 1] SLEEVE  
30. 8H-9208 [ 1] DOWEL  
31. 5S-5058 [ 1] GEAR ASSEM. (66 Teeth)  
32. 8H-9208 [ 1] DOWEL  
33. 1S-7436 [ 1] RACK  
34. 1S-0214 [ 1] SPRING  
35. 7M-5940 [ 1] PLATE  
36. 2H-3504 [ 1] LOCK  
37. 0L-0472 [ 1] BOLT  
 

#UEG0266S0068
 

5S-7248: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (5S7248 N/S)
Serial No. 91P1 to 91P405 and 91P407 inclusive
c112421 UEG0266S
5S7248 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] LINE ASSEM. (No. 6)  
2. [1] LINE ASSEM. (No. 5)  
3. [1] LINE ASSEM. (No. 4)  
4. [1] CLAMP  
5. [2] DAMPER  
6. [8] BOLT  
  [8] LOCKWASHER  
7. [1] LINE ASSEM. (No. 3)  
8. [1] LINE ASSEM. (No. 2)  
9. [1] LINE ASSEM. (No. 1)  
10. [1] CLAMP  
11. [1] FITTING  
12. [1] TUBE (Drain)  
13. [1] CLIP  
14. [1] BOLT  
15. [6] LOCKWASHER  
16. [1] SEAL  
17. [2] BOLT  
18. [1] SEAL  
19. [1] BOLT (1.375" Long)  
  [1] BOLT (1.75" Long)  
20. [1] SEAL  
21. [1] BOLT  
22. [1] BRACKET  
23. [1] PLUG  
24. [1] SEAL  
25. [1] CLAMP  
26. [2] DAMPER  
27. [1] CLAMP  
28. [6] VALVE SERVICE GROUP  
29. [1] SEAL  
30. [1] SEAL  
31. [6] BODY  
32. [6] NUT  
 

#UEG0266S0069
 

5S-7248: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (5S7248 N/S)
Serial No. 91P406 and 91P408-Up
c115516 UEG0266S
5S7248 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your 815 SOIL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7176 [ 1] LINE ASSEM. (No. 6)  
2. 5S-7175 [ 1] LINE ASSEM. (No. 5)  
3. 9S-1230 [ 1] LINE ASSEM. (No. 4)  
4. 8S-4003 [ 1] CLAMP  
5. 8S-4005 [ 2] DAMPER  
6. 1B-2790 [ 8] BOLT  
  3B-4505 [ 8] LOCKWASHER  
7. 5S-7173 [ 1] LINE ASSEM. (No. 3)  
8. 5S-7172 [ 1] LINE ASSEM. (No. 2)  
9. 5S-7171 [ 1] LINE ASSEM. (No. 1)  
10. 8S-4004 [ 1] CLAMP  
11. 1P-9328 [ 1] FITTING  
12. 5S-7223 [ 1] TUBE (Drain)  
13. 9S-1350 [ 1] CLIP  
14. 0S-0509 [ 1] BOLT  
15. 3B-4506 [ 6] LOCKWASHER  
16. 8M-5248 [ 1] SEAL  
17. 1A-2029 [ 1] BOLT  
18. 8M-5260 [ 1] SEAL  
19. 0S-1591 [ 3] BOLT  
20. 8M-4987 [ 1] SEAL  
21. 0T-0055 [ 1] BOLT  
22. 2P-8704 [ 1] BRACKET  
23. 5M-6214 [ 1] PLUG  
24. 8M-4445 [ 1] SEAL  
25. 8S-3998 [ 1] CLAMP  
26. 8S-4000 [ 2] DAMPER  
27. 8S-3999 [ 1] CLAMP  
28. 7S-9891 [ 6] VALVE SERVICE GROUP  
29. 5B-3718 [ 1] SEAL  
30. 6F-1069 [ 1] SEAL  
31. 8S-2389 [ 6] BODY  
32. 5H-7225 [ 6] NUT  
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor And Decelerator Control<BR> (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Governor And Decelerator Control (9S7053 For D7 Tractor; Power Shift)<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Transfer Pump
814-815-816 ENGINE
Fuel Injection Pump Housing And Governor
814-815-816 ENGINE
Governor
814-815-816 ENGINE
Fuel Injection Pump Housing
814-815-816 ENGINE
Fuel Injection Pump Housing And Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Fuel Transfer Pump
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog 815 :

HAND AND FOOT GOVERNOR CONTROL
7K-6571 HAND AND FOOT GOVERNOR CONTROL
HAND AND FOOT GOVERNOR CONTROL
7K-6571 HAND AND FOOT GOVERNOR CONTROL
HAND AND FOOT GOVERNOR CONTROL
7K-6571 HAND AND FOOT GOVERNOR CONTROL
HAND AND FOOT GOVERNOR CONTROL
7K-6571 HAND AND FOOT GOVERNOR CONTROL
FUEL PUMP HOUSING AND GOVERNOR
7S-6740 FUEL PUMP HOUSING AND GOVERNOR
AIR COMPRESSOR
8S-0895 AIR COMPRESSOR
COMPRESSOR AS
4N-3927 COMPRESSOR AS
COMPRESSOR AS
4N-3927 COMPRESSOR AS
RACK STOP
7S-7813 RACK STOP
PUMP ASSEMBLY
9H-2256 PUMP ASSEMBLY
RACK STOP
9S-3312 RACK STOP
FUEL PRIMING PUMP GROUP
7S-1251 FUEL PRIMING PUMP GROUP
FUEL TRANSFER PUMP GROUP
7S-5445 FUEL TRANSFER PUMP GROUP
FUEL FILTER
FUEL FILTER
FUEL PUMP HOUSING GROUP
5S-9076 FUEL PUMP HOUSING GROUP
FUEL INJECTION VALVES AND LINES
5S-7248 FUEL INJECTION VALVES AND LINES

Truck sale:

 
678,700 
Caterpillar 815, Compactors, Construction
- Compactors
WHEELER MACHINERY CO.
Caterpillar 815KLRC, Compactors, Construction
543,055 
Caterpillar 815KLRC, Compactors, Construction
- Compactors
HASTINGS DEERING (AUSTRALIA)
Caterpillar 815K, Compactors, Construction
695,000 
Caterpillar 815K, Compactors, Construction
- Compactors
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 815, Compactors, Construction
45,000 
Caterpillar 815, Compactors, Construction
- Compactors
PETERSON CAT
Caterpillar 815K, Compactors, Construction
535,765 
Caterpillar 815K, Compactors, Construction
- Compactors
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.