CRANKSHAFT BEARING REPLACEMENTS 613 WHEEL TRACTOR

8L6378 FLYWHEEL GROUP
Serial No. 71M980, 982, 984 to 986, 988 to 992, 996, 998, 999, 1004, 1007, 1009,
1010, 1012 to 1016, 1018, 1020 to 1029, 1033 to 1045, 1047 to 1117, 1125, 1126
and 71M1129-Up

c135731 UEG0301S

For full view, you need register

Parts for your 613 WHEEL TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2N-7128	[1]	FLYWHEEL ASSEM.
2.	9L-8113	[1]	GEAR (134 Teeth)
3.	9L-8551	[8]	BOLT
	9L-8011	[1]	LOCK

#UEG0301S0032

9L-8570: CONNECTING ROD AND PISTON GROUP

CONNECTING ROD AND PISTON GROUP

9L8570 CONNECTING ROD AND PISTON GROUP--8 Required
Also part of 9L9910 Short Block Group listed on Page 17A

c119112 UEG0301S

9L8570 CONNECTING ROD AND PISTON GROUP Parts scheme

For full view, you need register

Parts for your 613 WHEEL TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-9363	[1]	PISTON GROUP (Standard)
	9L-9672	[1]	PISTON GROUP (.020" Oversize)
	9L-9300	[1]	PISTON GROUP (.040" Oversize)
2.	9L-9316	[1]	RING ASSEM. (Standard Oil)
			(Part of 9L9363 Group)
	9L-9673	[1]	RING ASSEM.
			(.020" Oversize-Oil)
			(Part of 9L9672 Group)
	9L-9323	[1]	RING ASSEM.
			(.040" Oversize-Oil)
			(Part of 9L9300 Group)
3.	9L-9192	[1]	RING (Standard-Compression)
			(Part of 9L9363 Group)
	9L-9674	[1]	RING (.020" Oversize)
			(Part of 9L9672 Group)
	9L-9146	[1]	RING (.040" Oversize)
			(Part of 9L9300 Group)
4.	1J-6473	[2]	RING
5.	9N-8002 RC	[1]	ROD ASSEM.
6.	9L-8382	[1]	BEARING
7.	9L-8225	[2]	BOLT
8.	9L-7669	[2]	NUT
9.	9L-7651	[1]	BEARING (service)
			(Consists of 2 9L9324 Bearings)
	9L-7788 C	[1]	BEARING (.010 in. undersize)
	9L-7789 C	[1]	BEARING (.020 in. undersize)
10.	9L-9889	[1]	PIN
	9L-9612	[1]	PISTON RING GROUP
			(Consists of complete set of Rings for one Piston)
	C		INDICATES CHANGE
	R		REMFG PART MAY BE AVAILABLE

#UEG0301S0033

9S-3107: AIR COMPRESSOR

AIR COMPRESSOR

AIR COMPRESSOR (9S3107 N/S)
Serial No. 71M1 to 71M780 inclusive
9M5475 Compressor parts are shown on Page 25

c111105 UEG0301S

For full view, you need register

Parts for your 613 WHEEL TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-7259	[1]	ELBOW
2.	4K-9413	[1]	TUBE
3.	8M-2037	[1]	GOVERNOR ASSEM.
	9M-0402	[1]	KIT (Governor Overhaul)
			(Includes Grommets, Valves, Springs, Filters and Seal)
4.	2S-2923	[1]	COVER
			(Part of 8M2037 Assem.)
5.	3B-8995	[1]	FITTING
	1F-1344	[1]	NUT
			(Part of 3B8995 Fitting)
6.	1D-4541	[2]	BOLT
	1D-4716	[2]	NUT
	3B-4505	[2]	LOCKWASHER
7.	8S-8323	[1]	HOSE ASSEM. (22" long overall)
8.	5H-8936	[1]	ADAPTER
9.	8S-8321	[1]	HOSE ASSEM. (28" long overall)
10.	8M-2770	[2]	CLIP
11.	3B-7731	[1]	ELBOW
12.	5S-7663	[1]	GASKET
13.	9S-3115	[1]	BRACKET
14.	8S-8320	[1]	SPACER
15.	2B-2006	[1]	BOLT
	1D-4719	[1]	NUT
	3B-4508	[1]	LOCKWASHER
16.	9S-3108	[1]	HOSE ASSEM.
17.	4D-0582	[2]	FITTING
18.	9S-3128	[1]	SUPPORT ASSEM.
19.	4F-8965	[4]	BOLT
	3B-4507	[4]	LOCKWASHER
20.	9M-1091	[1]	VEE BELT
21.	9S-6738	[1]	PLATE
22.	4B-5271	[1]	WASHER
23.	0S-1594	[4]	BOLT
	3B-4506	[4]	LOCKWASHER
24.	3B-4618	[1]	COTTER PIN
25.	8S-8203	[1]	PULLEY
26.	1F-7552	[1]	FITTING
	1F-1344	[1]	NUT
			(Part of 1F7552 Fitting)
27.	9M-5475 RY	[1]	COMPRESSOR ASSEM.
			(See Separate Illustration)
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#UEG0301S0034

9S-3107: AIR COMPRESSOR

AIR COMPRESSOR

AIR COMPRESSOR (9S3107 N/S)
Serial No. 71M781-UP
9M5475 Compressor parts are shown on Page 25

c135344 UEG0301S

For full view, you need register

Parts for your 613 WHEEL TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-7259	[2]	ELBOW
2.	4K-9413	[1]	TUBE
3.	8M-2037	[1]	GOVERNOR ASSEM.
	9M-0402	[1]	KIT (Governor Overhaul)
			(Includes Grommets, Valves, Springs, Filters and Seal)
4.	2S-2923	[1]	COVER
			(Part of 8M2037 Assem.)
5.	3B-8995	[1]	FITTING
	1F-1344	[1]	NUT
			(Part of 3B8995 Fitting)
6.	1D-4541	[2]	BOLT
	1D-4716	[2]	NUT
	3B-4505	[2]	LOCKWASHER
7.	8S-8323	[1]	HOSE ASSEM. (22" long overall)
8.	9S-7720	[1]	ELBOW
9.	2P-1842	[1]	HOSE ASSEM. (28" long overall)
10.	8M-2770	[2]	CLIP
11.	3B-6553	[1]	ELBOW
12.	5S-7663	[1]	GASKET
13.	9S-3115	[1]	BRACKET
14.	8S-8320	[1]	SPACER
15.	2B-2006	[1]	BOLT
	1D-4719	[1]	NUT
	3B-4508	[1]	LOCKWASHER
16.	9S-3108	[1]	HOSE ASSEM.
17.	4D-0582	[2]	FITTING
18.	9S-3128	[1]	SUPPORT ASSEM.
19.	4F-8965	[4]	BOLT
	3B-4507	[4]	LOCKWASHER
20.	9M-1091	[1]	VEE BELT
21.	9S-6738	[1]	PLATE
22.	4B-5271	[1]	WASHER
23.	0S-1594	[4]	BOLT
	3B-4506	[4]	LOCKWASHER
24.	3B-4618	[1]	COTTER PIN
25.	8S-8203	[1]	PULLEY
26.	1F-7552	[1]	FITTING
	1F-1344	[1]	NUT
			(Part of 1F7552 Fitting)
27.	9M-5475 RY	[1]	COMPRESSOR ASSEM.
			(See Separate Illustration)
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#UEG0301S0035

9M-5475: COMPRESSOR A-

COMPRESSOR A-

9M5475 AIR COMPRESSOR ASSEMBLY
Part of 9S3107 Air Compressor Group shown on Pages 24 & 24A

c202094 UEG0301S

For full view, you need register

Parts for your 613 WHEEL TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4M-6407	[1]	HEAD ASSEM.
4M-6387	[2]	SPRING
4M-5283	[4]	BOLT
4M-6388	[2]	GUIDE
4M-6405	[1]	COVER ASSEM.
4M-6418	[1]	GASKET
4M-6423	[2]	VALVE
4M-6406	[1]	BODY ASSEM.
4M-6419	[2]	SEAT
		(PART OF 4M6406 ASSEM.)
4M-6410 H	[1]	SEAT
4M-6389	[1]	GASKET
4M-6393 H	[1]	SPRING
4M-6409 H	[1]	SADDLE
4M-6401	[2]	PISTON ASSEM.
4M-6395	[2]	LOCK
4M-6402	[2]	ROD ASSEM.
4M-6397	[1]	GASKET
4M-6399	[1]	GASKET
1B-3867	[1]	BEARING
7M-0320	[4]	BOLT
3B-4504	[4]	LOCKWASHER
4M-6398	[1]	COVER
4D-1608	[1]	SEAL
4M-5289	[1]	KEY
7F-6547	[1]	NUT
4M-6386	[1]	CRANKSHAFT
4M-5285	[1]	RING
4M-6417	[4]	BOLT
		(2 In Each Rod Assem. 4M6402)
4M-6416	[2]	LOCK
4M-5282	[1]	BOLT
4M-6390	[2]	SPRING
4M-6391	[2]	VALVE
4M-5281	[5]	BOLT
4M-6392	[2]	GUIDE
4M-6415 H	[2]	PLUNGER
		(CONSISTS OF ALL PARTS MARKED H)
4M-6421	[1]	BRACKET
4M-6411	[1]	ADAPTER
4M-6420	[1]	GASKET
4M-5281	[2]	BOLT
3B-4504	[2]	LOCKWASHER
4M-6414 H	[2]	GUIDE
4M-6425	[4]	BOLT
3B-4505	[4]	LOCKWASHER
4M-6400 H	[2]	PISTON ASSEM.
3L-6768 C	[2]	SEAL
4M-6412	[2]	RING
4M-6413	[2]	PISTON
		(1 OF EACH IN EACH PISTON ASSEM. 4M6400)
5M-6754	[1]	COVER
5M-6755	[4]	MACHINE SCREW
3B-4502	[4]	LOCKWASHER
4M-6385	[1]	GASKET
4M-6404	[1]	CRANKCASE ASSEM.
7M-0909	[1]	KIT (PISTON RINGS)
		(CONSISTS OF COMPLETE SET OF RINGS FOR TWO PISTONS-NOT PART OF AIR COMPRESSOR ASSEM. 9M5475)
C		INDICATES CHANGE

#UEG0301S0036

1N-9871: FUEL SYSTEM

FUEL SYSTEM

FUEL SYSTEM (1N9871 N/S)--Part 1 of 2
Serial No. 71M1 to 875, 877 to 882, 896, 897, 927, 934, 973, 1006,
1017 and 71M1032 inclusive. See Page 16 for Gasket Kit

c111050 UEG0301S

For full view, you need register

Parts for your 613 WHEEL TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-7180	[1]	PUMP ASSEM. (Fuel Transfer)
2.	9L-8492	[2]	PLUG
3.	9L-8496	[2]	TEE
4.	9L-9271	[1]	LINE ASSEM. (No. 1)
5.	9L-9273	[1]	LINE ASSEM. (No. 3)
6.	9L-8472	[1]	TUBE ASSEM. (Fuel Inlet)
7.	9L-9275	[1]	LINE ASSEM. (No. 5)
8.	9L-9277	[1]	LINE ASSEM. (No. 7)
9.	9L-8715	[4]	CLAMP
10.	9L-9014	[12]	SCREW
	3B-4502	[12]	LOCKWASHER
11.	5K-9979	[1]	FITTING
12.	9L-8713	[3]	CLAMP
13.	9L-8714	[4]	CLAMP (Tapped)
14.	9L-9278	[1]	LINE ASSEM. (No. 8)
15.	9L-9276	[1]	LINE ASSEM. (No. 6)
16.	9L-8716	[3]	CLAMP (Tapped)
17.	9L-9274	[1]	LINE ASSEM. (No. 4)
18.	9L-9160	[1]	CLAMP ASSEM.
19.	9L-9272	[1]	LINE ASSEM. (No. 2)
20.	8M-8157	[1]	SEAL
21.	8M-5260	[1]	SEAL
22.	0S-1618	[3]	BOLT
	3B-4505	[3]	LOCKWASHER
23.	9L-8175	[1]	GASKET
24.	0S-1594	[2]	BOLT
25.	9L-8868	[1]	ELBOW
26.	1J-9671	[1]	SEAL
27.	1N-5878	[1]	SOLENOID
28.	3J-7354	[1]	SEAL
29.	0L-1351	[2]	BOLT
30.	3B-4506	[4]	LOCKWASHER
31.	9S-3148	[1]	BRACKET ASSEM.
32.	4D-2619	[1]	BEARING
			(Part of 9S3148 Assem.)

#UEG0301S0037

1N-9871: FUEL SYSTEM

FUEL SYSTEM

FUEL SYSTEM (1N9871 N/S)--Part 2 of 2
Serial No. 71M1 to 875, 877 to 882, 896, 897, 927, 934, 973, 1006,
1017 and 71M1032 inclusive. Fuel Pump Housing and
Governor parts are shown on Page 33

c137163 UEG0301S

For full view, you need register

Parts for your 613 WHEEL TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2N-1985	[1]	GEAR ASSEM. (69 Teeth)
2.	9M-9729	[1]	SEAL
3.	Y	[1]	HOUSING AND GOVERNOR
			(See Separate Illustration)
4.	2B-2404	[1]	CLIP
5.	9L-9372	[4]	LOCK
6.	9L-8557	[1]	TEE
7.	9L-8374	[1]	TUBE ASSEM. (Fuel Return-R.H.)
8.	5K-9979	[1]	FITTING
9.	9L-8873	[1]	CLAMP
10.	9L-9167	[1]	SPACER
11.	1D-4717	[1]	NUT
	3B-4506	[1]	LOCKWASHER
12.	9L-8345	[1]	TUBE ASSEM. (Fuel Return-R.H.)
13.	9L-8373	[1]	TUBE ASSEM. (Fuel Return-L.H.)
14.	9L-8344	[4]	CONNECTOR
15.	9L-8095	[2]	FITTING
16.	9L-7652	[1]	SHAFT ASSEM.
17.	9L-8387	[2]	TUBE
18.	9L-8248	[2]	MANIFOLD ASSEM.
19.	9L-8969	[12]	CLAMP
20.	9L-7675	[8]	ADAPTER ASSEM.
21.	6F-4855	[1]	SEAL
22.	9L-8388	[8]	SPACER
23.	9L-8134	[8]	CLAMP ASSEM.
24.	9L-8970	[8]	CLAMP
25.	9L-8436	[8]	BOOT
26.	9L-9263	[8]	NOZZLE ASSEM.
	1H-1023	[1]	SEAL
27.	9L-9099	[1]	WASHER
28.	9L-9098	[1]	SEAL
	9L-7663 H	[8]	PROTECTIVE PLUG
			(Fuel Nozzle Inlet)
	6H-3687 H	[8]	PROTECTIVE CAP
			(Fuel Nozzle Tip)
			(NOT SHOWN)
	H		NOT PART OF FUEL SYSTEM
	Y		SEPARATE ILLUSTRATION

#UEG0301S0038

2N-8505: FUEL SYSTEM

FUEL SYSTEM

FUEL SYSTEM (2N8505 N/S)--Part 1 of 2
Serial No. 71M876, 883 to 895, 898 to 926, 928 to 933, 935 to 972, 974 to
1005, 1007 to 1016, 1018 to 1031 and 71M1033-Up. See Page 16 for Gasket Kit

c134144 UEG0301S

For full view, you need register

Parts for your 613 WHEEL TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-7180	[1]	PUMP ASSEM. (Fuel Transfer)
2.	9L-8492	[2]	PLUG
3.	9L-8496	[2]	TEE
4.	9L-9271	[1]	LINE ASSEM. (No. 1)
5.	9L-9273	[1]	LINE ASSEM. (No. 3)
6.	9L-8472	[1]	TUBE ASSEM. (Fuel Inlet)
7.	9L-9275	[1]	LINE ASSEM. (No. 5)
8.	9L-9277	[1]	LINE ASSEM. (No. 7)
9.	9L-8715	[4]	CLAMP
10.	9L-9014	[12]	SCREW
	3B-4502	[12]	LOCKWASHER
11.	5K-9979	[1]	FITTING
12.	9L-8713	[3]	CLAMP
13.	9L-8714	[4]	CLAMP (Tapped)
14.	9L-9278	[1]	LINE ASSEM. (No. 8)
15.	9L-9276	[1]	LINE ASSEM. (No. 6)
16.	9L-8716	[3]	CLAMP (Tapped)
17.	9L-9274	[1]	LINE ASSEM. (No. 4)
18.	9L-9160	[1]	CLAMP ASSEM.
19.	9L-9272	[1]	LINE ASSEM. (No. 2)
20.	8M-8157	[1]	SEAL
21.	8M-5260	[1]	SEAL
22.	0S-1618	[3]	BOLT
	3B-4505	[3]	LOCKWASHER
23.	9L-8175	[1]	GASKET
24.	0S-1594	[2]	BOLT
25.	9L-8868	[1]	ELBOW
26.	1J-9671	[1]	SEAL
27.	1N-5878	[1]	SOLENOID
28.	3J-7354	[1]	SEAL
29.	0L-1351	[2]	BOLT
30.	3B-4506	[4]	LOCKWASHER
31.	9S-3148	[1]	BRACKET ASSEM.
32.	4D-2619	[1]	BEARING
			(Part of 9S3148 Assem.)

#UEG0301S0039

2N-8505: FUEL SYSTEM

FUEL SYSTEM

FUEL SYSTEM (2N8505 N/S)--Part 2 of 2
Serial No. 71M876, 883 to 895, 898 to 926, 928 to 933, 935 to 972, 974 to 1005, 1007
to 1016, 1018 to 1031 and 71M1033-Up. Fuel Pump Housing and Governor
parts are shown on Page 33

c134145 UEG0301S

For full view, you need register

Parts for your 613 WHEEL TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-7012	[1]	GEAR ASSEM.
			(69 Teeth)
2.	9M-9729	[1]	SEAL
3.	Y	[1]	HOUSING AND GOVERNOR
			(See Separate Illustration)
4.	2B-2404	[1]	CLIP
5.	9L-9372	[4]	LOCK
6.	9L-8557	[1]	TEE
7.	9L-8374	[1]	TUBE ASSEM. (Fuel Return R.H.)
8.	5K-9979	[1]	FITTING
9.	9L-8873	[1]	CLAMP
10.	9L-9167	[1]	SPACER
11.	1B-2578	[1]	NUT
	3B-4506	[1]	LOCKWASHER
12.	9L-8345	[1]	TUBE ASSEM. (Fuel Return R.H.)
13.	9L-8373	[1]	TUBE ASSEM. (Fuel Return L.H.)
14.	9L-8344	[4]	CONNECTOR
15.	9L-8095	[2]	FITTING
16.	9L-7130	[1]	SHAFT ASSEM.
17.	9L-8387	[2]	TUBE
18.	9L-8248	[2]	MANIFOLD ASSEM.
19.	9L-8969	[12]	CLAMP
20.	9L-9380	[8]	ADAPTER ASSEM.
21.	6F-4855	[8]	SEAL
			(1 in each 9L9380 Adapter Assem.)
22.	9L-8388	[8]	SPACER
23.	9L-8134	[8]	CLAMP ASSEM.
24.	9L-8970	[8]	CLAMP
25.	9L-8436	[8]	BOOT
26.	9L-9263	[8]	NOZZLE ASSEM.
	1H-1023	[8]	SEAL
27.	9L-9099	[8]	WASHER
28.	9L-9098	[8]	SEAL
			(1 each in 9L9263 Nozzle Assem.)
	Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CRANKSHAFT GP

Special Instruction

Installation of 0R1210 or 0R1211 Undersize Crankshafts{1202, 1230}
Installation of 0R1210 or 0R1211 Undersize Crankshafts{1202, 1230}

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}

Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Reuse And Salvage Guidelines

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Service Magazine

1980 Caterpillar Remanufactured Products Catalog Is Now Available{0374}
1980/06/23

Comparison And Applications Of Six And Eight Counterweight Crankshafts{1202,1156}
1981/08/17

New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/01/25

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07

Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21

Wider Crankshaft Gear Used{1202,1204,1206}
1982/10/11

New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/10/18

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01

Check Cylinder Bores For Chamfer During Reconditioning{1202,1222,1223}
1983/02/14

Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer{1160,0622}
1983/05/09

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

Crankshaft Failures{1202,1230}
1983/11/21

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21

Some Crankshafts Must Be Tufftride Hardened After A Regrind{1202}
1984/02/13

New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01

Rebuilt Standard Size Crankshafts Used In Some Remanufactured Engines{1202}
1984/12/10

New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper{1160}
1986/01/13

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Caterpillar Crankshaft Heat Code Locations{1202}
1986/10/20

Lightening Holes Not Drilled In Some Crankshafts{1202}
1977/01/24

Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11

Check For Extra Holes In Crankshaft Flange If Oil Leaks From Between The Flywheel And Crankshaft Flange{1156,1202}
1977/09/05

Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17

Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Engines Can Use Crankshafts With Either Six Or Eight Counterweights {1202}
1979/09/10

New Pistons Used With Two Keystone Compression Rings{1156,1205,1214,1215}
1989/06/19

New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 613 :

8L-6378 FLYWHEEL GROUP

2N-2432 CRANKSHAFT

1N-9868 COVER AND HOUSING

9L-9446 CYLINDER BLOCK GROUP

9L-7625 CYLINDER HEAD

8L-6378 FLYWHEEL GROUP

9L-8570 CONNECTING ROD AND PISTON GROUP

9S-3107 AIR COMPRESSOR

9M-5475 COMPRESSOR A-

1N-9871 FUEL SYSTEM

2N-8505 FUEL SYSTEM

Truck sale:

8,900

Caterpillar 613, Construction
- Scrapers
MICHIGAN CAT

8,900

Caterpillar 613, Construction
- Scrapers
MICHIGAN CAT

19,900

Caterpillar 613, Construction
- Scrapers
MICHIGAN CAT

16,500

Caterpillar 613, Construction
- Scrapers
ZIEGLER CAT

CATERPILLAR 613 1973
- WHEEL TRACTOR SCRAPERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;