AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4L3400 COMPRESSION RELEASE CONTROL GROUP Serial No. 49B1091 to 49B1578 inclusive D342C INDUSTRIAL ENGINE


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
BASIC ENGINE
CYLINDER HEAD GP

INDUSTRIAL ENGINE D342C INDUSTRIAL ENGINE 49B
 D342 ENGINE 49B01091-UP UEG0567S D342C 49B   (1966)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
COMPRESSION RELEASE CONTROL GROUP
4L-3400 COMPRESSION RELEASE CONTROL GROUP
COMPLETE GASOLINE STARTING ENGINE ARRANGEMENT
6L-2584 STARTING ENGINE & TRANSMISSION ARRANGEMENT
6L-2528 BASIC STARTING ENGINE ARRANGEMENT
 

#UEG0567S0020
 

4L-3400: COMPRESSION RELEASE CONTROL GROUP

4L3400 COMPRESSION RELEASE CONTROL GROUP
Serial No. 49B1091 to 49B1578 inclusive
c112148 UEG0567S
4L3400 COMPRESSION RELEASE CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5H-5897 [1] LEVER  
  5H-5984 [1] LEVER  
  9S-1303 [2] PIN  
  3B-4607 [2] COTTER PIN  
  5B-2279 [2] END  
    (PART OF ROD ASSEM.)
  4L-3403 [1] ROD ASSEM.  
  4L-3401 [1] BRACKET ASSEM.  
  0S-1012 [1] SPRING  
  6F-4210 [1] PLUNGER  
  1B-8702 [1] KEY  
  1A-2029 [1] BOLT  
  4H-8967 [1] BRACKET  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  7B-3235 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  1A-2652 [1] PIN  
    (PART OF BRACKET ASSEM.)
  3B-4629 [1] COTTER PIN  
  6H-0190 [1] WASHER  
 

#UEG0567S0021
 

3L-8456: CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM (3L8456 N/S)--Side View--Part 1 of 2
Serial No. 49B1091 to 49B1578 inclusive. See Page 34 for Gasket Kits
c97431 UEG0567S
3L8456 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6L-6289 [2] EYE  
  9M-2315 [2] COVER  
  9M-2616 [2] GASKET  
  7B-0280 [1] SEAL  
  1F-6618 [3] BRACKET  
  6L-5556 [2] GASKET  
  8H-1994 [6] VALVE (EXHAUST)  
  8H-1993 [6] VALVE (INLET)  
  0S-1590 [12] BOLT  
  3H-3451 [6] LOCK  
  5S-1220 [12] LIFTER  
  2B-7408 [2] PLUG  
  1A-1884 [4] SPRING  
  1B-4204 [12] NUT  
  1A-0744 [12] SCREW  
  2F-8584 [6] BRACKET  
  1B-9917 [4] SPRING  
  6H-0411 [16] WASHER  
  3B-4621 [4] COTTER PIN  
  2A-1278 [6] END  
  1B-4203 [6] NUT  
  1A-5666 [12] NUT  
  4S-6554 [4] NUT (RUBBER SEALED)  
  9H-1031 [16] WASHER  
  6B-4040 [6] ROD  
  2F-8874 [2] SHAFT ASSEM.  
  3B-0622 [4] PLUG  
    (2 IN EACH SHAFT ASSEM. 2F8874)
  4H-7316 [1] SHAFT  
  7B-0290 [1] SCREW  
  0L-0364 [1] LOCK  
  9H-6236 [12] ROD ASSEM.  
  2B-7114 [6] YOKE  
  4H-7302 [12] GUIDE  
 

#UEG0567S0022
 

3L-8456: CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM (3L8456 N/S)--End View--Part 2 of 2
Serial No. 49B1091 to 49B1578 inclusive. Refer also to Page 88 for special parts
c97432 UEG0567S
3L8456 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7B-1756 [6] NUT  
  3F-8526 [6] WASHER  
  8F-4994 [6] SEAL  
  3B-7302 [6] BOLT  
  1B-4205 [6] NUT  
  3B-4508 [6] LOCKWASHER  
  6B-4570 [12] ARM ASSEM.  
  3F-7445 [12] BUSHING  
    (1 IN EACH ARM ASSEM. 6B4570)
  0L-2070 [14] BOLT (2.25" LONG)  
  0S-1591 [10] BOLT (1.50" LONG)  
  3B-4506 [24] LOCKWASHER  
  0T-0431 [24] WASHER  
  6B-6683 [16] NUT  
  4S-6555 [10] NUT (RUBBER SEALED)  
  9H-1024 [26] WASHER  
  9H-1020 [12] STUD  
  8M-7637 [12] ROTATOR  
  3B-0623 [28] PLUG  
    (14 IN EACH HEAD ASSEM. 4S6579)
  4S-6579 [2] CYLINDER HEAD SERVICE ASSEM.  
  3S-1205 [2] GASKET  
  7B-2420 [2] FERRULE  
  7B-2419 [2] SEAL  
  9M-8745 [6] INSERT (INTAKE)  
  8M-9810 [6] INSERT (EXHAUST)  
    (3 OF EACH IN EACH HEAD ASSEM. 4S6579)
  9H-1022 [6] STUD  
  1B-4206 [6] NUT  
  6B-8505 [12] SLEEVE  
  3B-1142 [12] RETAINER  
  3B-1143 [36] LOCK  
  9M-5350 [12] SPRING (OUTER)  
  9M-5349 [12] SPRING (INNER)  
  9M-2314 [2] BASE  
  1S-9910 [6] BUSHING (INTAKE)  
  4S-7500 [6] BUSHING (EXHAUST)  
    (3 OF EACH IN EACH HEAD ASSEM. 4S6579)
  4F-5607 [6] SEAL  
  5M-2705 [6] RETAINER  
  6B-7021 [6] SEAL  
  6H-6834 [6] CHAMBER ASSEM.  
  0L-1351 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  7B-7770 [4] COVER  
  6H-2007 [4] GASKET  
  5H-7071 [24] DIRECTOR  
    (12 IN EACH HEAD ASSEM. 4S6579)
  9H-1288 [12] STUD  
  6B-6224 [24] FERRULE  
  6B-6225 [24] SEAL  
  5H-2579 [6] GASKET  
  1S-4390 [2] GASKET  
 

#UEG0567S0023
 

3L-8456: CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM (3L8456 N/S)--Side View Part 1 of 2
Serial No. 49B1579 to 49B1598 inclusive. See Page 34 for Gasket Kits
c106984 UEG0567S
3L8456 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6L-6289 [2] EYE  
  9M-2315 [2] COVER  
  9M-2616 [2] GASKET  
  5H-4279 C [1] PLUG  
  6L-5556 [2] GASKET  
  8H-1994 [6] VALVE (EXHAUST)  
  8H-1993 [6] VALVE (INLET)  
  0S-1590 [12] BOLT  
  3H-3451 [6] LOCK  
  5S-1220 [12] LIFTER  
  2B-7408 [2] PLUG  
  1A-1884 [4] SPRING  
  1B-4204 [12] NUT  
  1A-0744 [12] SCREW  
  2F-8584 [6] BRACKET  
  1B-9917 [4] SPRING  
  6H-0411 [16] WASHER  
  3B-4621 [4] COTTER PIN  
  1A-5666 [12] NUT  
  4S-6554 [4] NUT  
    (RUBBER SEALED)
  9H-1031 [16] WASHER  
  2F-8874 [2] SHAFT ASSEM.  
  3B-0622 [4] PLUG  
    (2 IN EACH SHAFT ASSEM. 2F8874)
  9H-6236 [12] ROD ASSEM.  
  2B-7114 [6] YOKE  
  4H-7302 [12] GUIDE  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEG0567S0024
 

3L-8456: CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM (3L8456 N/S)--End View Part 2 of 2
Serial No. 49B1579 to 49B1598 inclusive. Refer also to Page 88 for special parts
c106985 UEG0567S
3L8456 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7B-1756 [6] NUT  
  3F-8526 [6] WASHER  
  8F-4994 [6] SEAL  
  3B-7302 [6] BOLT  
  1B-4205 [6] NUT  
  3B-4508 [6] LOCKWASHER  
  1S-2365 [12] ARM ASSEM  
  0L-1143 [14] BOLT (2.50" LONG)  
  2A-4639 [10] BOLT (1.50" LONG)  
  3B-4506 [24] LOCKWASHER  
  0T-0431 [24] WASHER  
  6B-6683 [16] NUT  
  4S-6555 [10] NUT  
    (RUBBER SEALED)
  9H-1024 [26] WASHER  
  9H-1020 [12] STUD  
  8M-7637 [12] ROTATOR  
  3B-0623 [28] PLUG  
    (14 IN EACH HEAD ASSEM. 4S6579)
  4S-6579 [2] CYLINDER HEAD SERVICE ASSEM.  
  3S-1205 [2] GASKET  
  7B-2420 [2] FERRULE  
  7B-2419 [2] SEAL  
  9M-8745 [6] INSERT (INTAKE)  
  8M-9810 [6] INSERT (EXHAUST)  
    (3 OF EACH IN EACH HEAD ASSEM. 4S6579)
  9H-1022 [6] STUD  
  1B-4206 [6] NUT  
  6B-8505 [12] SLEEVE  
  3B-1142 [12] RETAINER  
  3B-1143 [36] LOCK  
  9M-5350 [12] SPRING (OUTER)  
  9M-5349 [12] SPRING (INNER)  
  9M-2314 [2] BASE  
  1S-9910 [6] BUSHING  
    (INTAKE)
  4S-7500 [6] BUSHING  
    (EXHAUST)
    (3 OF EACH IN EACH HEAD ASSEM. 4S6579)
  4F-5607 [6] SEAL  
  5M-2705 [6] RETAINER  
  6B-7021 [6] SEAL  
  6H-6834 [6] CHAMBER ASSEM.  
  0L-1351 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  7B-7770 [4] COVER  
  6H-2007 [4] GASKET  
  5H-7071 [24] DIRECTOR  
    (12 IN EACH HEAD ASSEM. 4S6579)
  9H-1288 [12] STUD  
  6B-6224 [24] FERRULE  
  6B-6225 [24] SEAL  
  5H-2579 [6] GASKET  
  1S-4390 [2] GASKET  
 

#UEG0567S0025
 

3L-8456: CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM (3L8456 N/S)--Side View Part 1 of 2
Serial No. 49B1599 to 49B1853 inclusive. See Page 34 for Gasket Kits
c131682 UEG0567S
3L8456 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6L-6289 [2] EYE  
  9M-2315 [2] COVER  
  9M-2616 [2] GASKET  
  5H-4279 [1] PLUG  
  6L-5556 [2] GASKET  
  8H-1994 [6] VALVE (EXHAUST)  
  8H-1993 [6] VALVE (INLET)  
  0S-1590 [12] BOLT  
  3H-3451 [6] LOCK  
  5S-1220 [12] LIFTER  
  2B-7408 [2] PLUG  
  1A-1884 [4] SPRING  
  1B-4204 [12] NUT  
  1A-0744 [12] SCREW  
  2F-8584 [6] BRACKET  
  1B-9917 [4] SPRING  
  6H-0411 [16] WASHER  
  3B-4621 [4] COTTER PIN  
  1A-5666 [12] NUT  
  4S-6554 [4] NUT  
    (RUBBER SEALED)
  9H-1031 [16] WASHER  
  2F-8874 [2] SHAFT ASSEM.  
  3B-0622 [4] PLUG  
    (2 IN EACH SHAFT ASSEM. 2F8874)
  9H-6236 [12] ROD ASSEM.  
  2B-7114 [6] YOKE  
  4H-7302 [12] GUIDE  
 

#UEG0567S0026
 

3L-8456: CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM (3L8456 N/S)--End View Part 2 of 2
Serial No. 49B1599 to 49B1853 inclusive. Refer also to Page 88 for special parts
c112147 UEG0567S
3L8456 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7B-1756 [6] NUT  
  3F-8526 [6] WASHER  
  8F-4994 [6] SEAL  
  3B-7302 [6] BOLT  
  1B-4205 [6] NUT  
  3B-4508 [6] LOCKWASHER  
  1S-2365 [12] ARM ASSEM.  
  0L-1143 [14] BOLT (2.50" LONG)  
  2A-4639 [10] BOLT (1.50" LONG)  
  3B-4506 [24] LOCKWASHER  
  0T-0431 [24] WASHER  
  6B-6683 [16] NUT  
  4S-6555 [10] NUT  
    (RUBBER SEALED)
  9H-1024 [26] WASHER  
  9H-1020 [12] STUD  
  8M-7637 [12] ROTATOR  
  3B-0623 [28] PLUG  
    (14 IN EACH HEAD ASSEM. 4S6579)
  4S-6579 [2] CYLINDER HEAD SERVICE ASSEM.  
  3S-1205 [2] GASKET  
  7B-2420 [2] FERRULE  
  6L-7814 [2] SEAL  
  9M-8745 [6] INSERT (INTAKE)  
  8M-9810 [6] INSERT (EXHAUST)  
    (3 OF EACH IN EACH HEAD ASSEM. 4S6579)
  9H-1022 [6] STUD  
  1B-4206 [6] NUT  
  6B-8505 [12] SLEEVE  
  3B-1142 [12] RETAINER  
  3B-1143 [36] LOCK  
  9M-5350 [12] SPRING (OUTER)  
  9M-5349 [12] SPRING (INNER)  
  9M-2314 [2] BASE  
  1S-9910 [6] BUSHING (INTAKE)  
  1S-6653 [6] BUSHING (EXHAUST)  
    (3 OF EACH IN EACH HEAD ASSEM. 4S6579)
  2P-0483 [6] CHAMBER ASSEM.  
  6L-7816 [6] SEAL  
  0L-1351 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  7B-7770 [4] COVER  
  6H-2007 [4] GASKET  
  5H-7071 [24] DIRECTOR  
    (12 IN EACH HEAD ASSEM. 4S6579)
  9H-1288 [12] STUD  
  6B-6224 [24] FERRULE  
  6L-7813 [24] SEAL  
  5H-2579 [6] GASKET  
  1S-4390 [2] GASKET  
 

#UEG0567S0027
 

3L-8456: CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM (3L8456 N/S)--Side View Part 1 of 2
Serial No. 49B1854 to 49B1979 inclusive
See Page 34 for Gasket Kits
c131682 UEG0567S
3L8456 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6L-6289 [2] EYE  
  9M-2315 [2] COVER  
  9M-2616 [2] GASKET  
  5H-4279 [1] PLUG  
  6L-5556 [2] GASKET  
  8H-1994 [6] VALVE (EXHAUST)  
  8H-1993 [6] VALVE (INLET)  
  0S-1590 [12] BOLT  
  3H-3451 [6] LOCK  
  5S-1220 [12] LIFTER  
  2B-7408 [2] PLUG  
  1A-1884 [4] SPRING  
  1B-4204 [12] NUT  
  1A-0744 [12] SCREW  
  2F-8584 [6] BRACKET  
  1B-9917 [4] SPRING  
  6H-0411 [16] WASHER  
  3B-4621 [4] COTTER PIN  
  1A-5666 [12] NUT  
  4S-6554 [4] NUT  
    (RUBBER SEALED)
  9H-1031 [16] WASHER  
  2F-8874 [2] SHAFT ASSEM.  
  3B-0622 [4] PLUG  
    (2 IN EACH SHAFT ASSEM. 2F8874)
  9H-6236 [12] ROD ASSEM.  
  2B-7114 [6] YOKE  
  4H-7302 [12] GUIDE  
 

#UEG0567S0028
 

3L-8456: CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM (3L8456 N/S)--End View Part 2 of 2
Serial No. 49B1854 to 49B1979 inclusive
Refer also to Page 88 for special parts
c149466 UEG0567S
3L8456 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7B-1756 [6] NUT  
  3F-8526 [6] WASHER  
  8F-4994 [6] SEAL  
  3B-7302 [6] BOLT  
  1B-4205 [6] NUT  
  3B-4508 [6] LOCKWASHER  
  1S-2365 [12] ARM ASSEM.  
  0L-1143 [14] BOLT (2.50" LONG)  
  2A-4639 [10] BOLT (1.50" LONG)  
  3B-4506 [24] LOCKWASHER  
  0T-0431 [24] WASHER  
  6B-6683 [16] NUT  
  4S-6555 [10] NUT  
    (RUBBER SEALED)
  9H-1024 [26] WASHER  
  9H-1020 [12] STUD  
  8M-7637 [12] ROTATOR  
  3B-0623 [14] PLUG  
    (PART OF 4N7041 ASSEM.)
  4N-7041 C [2] CYLINDER HEAD SERVICE ASSEM.  
  3S-1205 [2] GASKET  
  7B-2420 [2] FERRULE  
  6L-7814 [2] SEAL  
  9M-8745 [3] INSERT (INTAKE)  
  8M-9810 [3] INSERT (EXHAUST)  
    (PARTS OF 4N7041 ASSEM.)
  9H-1022 [6] STUD  
  1B-4206 [6] NUT  
  6B-8505 [12] SLEEVE  
  3B-1142 [12] RETAINER  
  3B-1143 [36] LOCK  
  9M-5350 [12] SPRING (OUTER)  
  9M-5349 [12] SPRING (INNER)  
  3N-1414 [12] SPACER  
  4N-3669 [6] GUIDE  
    (Part of 4N7041 Assem.)
  2P-0483 [6] CHAMBER ASSEM.  
  6L-7816 [6] SEAL  
  0L-1351 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  7B-7770 [4] COVER  
  6H-2007 [4] GASKET  
  5H-7071 [12] DIRECTOR  
    (PART OF 4N7041 ASSEM.)
  9H-1288 [12] STUD  
  6B-6224 [24] FERRULE  
  6L-7813 [24] SEAL  
  5H-2579 [6] GASKET  
  1S-4390 [2] GASKET  
  C   INDICATES CHANGE
 

#UEG0567S0029
 

3L-8456: CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM (3L8456 N/S)--Side View--Part 1 of 2
Serial No. 49B1980-Up
See Page 34 for Gasket Kits
c131682 UEG0567S
3L8456 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D342C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6L-6289 [2] EYE  
  9M-2315 [2] COVER  
  9M-2616 [2] GASKET  
  5H-4279 [1] PLUG  
  6L-5556 [2] GASKET  
  8H-1994 [6] VALVE (EXHAUST)  
  8H-1993 [6] VALVE (INLET)  
  0S-1590 [12] BOLT  
  3H-3451 [6] LOCK  
  5S-1220 [12] LIFTER  
  2B-7408 [2] PLUG  
  1A-1884 [4] SPRING  
  1B-4204 [12] NUT  
  1A-0744 [12] SCREW  
  2F-8584 [6] BRACKET  
  1B-9917 [4] SPRING  
  6H-0411 [16] WASHER  
  3B-4621 [4] COTTER PIN  
  1A-5666 [12] NUT  
  4S-6554 [4] NUT  
    (RUBBER SEALED)
  9H-1031 [16] WASHER  
  2F-8874 [2] SHAFT ASSEM.  
  3B-0622 [4] PLUG  
    (2 IN EACH SHAFT ASSEM. 2F8874)
  9H-6236 [12] ROD ASSEM.  
  2B-7114 [6] YOKE  
  4H-7302 [12] GUIDE  
 

Information:

General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Testing and Adjusting
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Start Switch Used {1416,1453}
1986/07/07
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New Starting Motors Used {1453}
2002/05/13

Caterpillar Parts SIS Catalog D342C :

ELBOW GP-EXHAUST
6L-2927 ELBOW GP-EXHAUST
MANIFOLDS
7L-2990 MANIFOLDS
TURBOCHARGER ASSEMBLY
5S-3801 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
5S-9980 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
5S-9980 TURBOCHARGER ASSEMBLY
BASIC TURBOCHARGER GROUP
4N-5646 BASIC TURBOCHARGER GROUP
TURBOCHARGER GROUP
7L-2987 TURBOCHARGER GROUP
TURBOCHARGER GROUP
7L-2987 TURBOCHARGER GROUP
CYLINDER HEAD GP
3L-8456 CYLINDER HEAD GP
CYLINDER HEAD GP
3L-8456 CYLINDER HEAD GP
CYLINDER HEAD GP
3L-8456 CYLINDER HEAD GP
CYLINDER HEAD GP
3L-8456 CYLINDER HEAD GP
CYLINDER HEAD GP
3L-8456 CYLINDER HEAD GP
CYLINDER HEAD GP
3L-8456 CYLINDER HEAD GP
CYLINDER HEAD GP
3L-8456 CYLINDER HEAD GP
CYLINDER HEAD GP
3L-8456 CYLINDER HEAD GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.