AVSPARE.COM
parts catalog

PLANETARY TRANSMISSION (9S4420 N/S)--Part 1 of 2 Part of 1P9676 Range Transmission Arrangement shown on Page 104 772


POWER TRAIN
TRANSMISSION GP
OPERATOR STATION
CONTROL GP-TRANSMISSION
BRAKING SYSTEM
BRAKE GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
POWER TRAIN
VALVE GP-PRESSURE CONTROL


POWER TRAIN

TRANSMISSION GP
 

#UEG0571S0230
 

9S-4420: PLANETARY TRANSMISSION

PLANETARY TRANSMISSION (9S4420 N/S)--Part 1 of 2
Part of 1P9676 Range Transmission Arrangement shown on Page 104
c110746 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2M-3380 [1] HOUSING  
  7M-1249 [1] PISTON  
  1M-3151 [6] PIN  
  4M-1677 [12] PIN  
  4B-9880 [12] BALL  
  1A-2029 [9] BOLT  
  1A-7427 [3] LOCK (3.875" LONG)  
  5M-2976 [3] LOCK (1.04" LONG)  
  1M-5513 [1] RACE AND ROLLER ASSEM.  
  1M-5514 [1] RACE  
  9S-8806 [1] PLATE (NUMBER)  
  7B-3028 [2] SCREW  
    (NOT SHOWN)
  9M-8274 [1] GEAR (23 TEETH)  
  0S-1594 [9] BOLT  
  9M-2126 [3] LOCK  
  3S-6818 [1] CARRIER  
  9M-6843 [1] HOUSING  
  7M-1253 [3] PISTON  
  4M-7790 [1] HOUSING ASSEM.  
  5M-7937 [2] DOWEL  
    (PART OF HOUSING ASSEM. 4M7790)
  5S-7830 [3] DISC ASSEM.  
  7H-7658 [12] SPRING (LONG)  
  1M-9691 [24] SPRING (SHORT)  
  9S-8798 [1] SUPPORT  
  4M-1641 [6] PIN  
  1A-5822 [12] BOLT  
  2M-0849 [12] WASHER  
  4M-7839 [1] GEAR  
    (138 AND 86 TEETH)
  0L-1026 [1] PLUG  
  3F-1953 [1] DOWEL  
  2M-4549 [6] GEAR (20 TEETH)  
  2S-3613 [1] GEAR (41 TEETH)  
  2S-3616 [1] HUB  
  2M-2122 [1] RING  
  6H-1822 [1] RING  
  2M-5685 [12] BEARING  
  4M-8845 [6] SHAFT  
  1S-6468 [1] FLANGE ASSEM.  
  4B-9880 [3] BALL  
    (PART OF FLANGE ASSEM. 1S6468)
  1S-8492 [4] DISC ASSEM.  
  2M-2179 R [3] PLATE  
  8M-6557 [1] RING  
    (STANDARD)
    - OR -
  5S-7833 [1] RING  
    (.015" OVERSIZE)
  9M-4335 [6] PIN  
  4M-9641 [2] BOLT  
  2M-0849 [2] WASHER  
  1M-8657 [17] BOLT  
  2M-0849 [17] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0571S0231
 

9S-4420: PLANETARY TRANSMISSION

PLANETARY TRANSMISSION (9S4420 N/S)--Part 2 of 2
Part of 1P9676 Range Transmission Arrangement shown on Page 104
c153756 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9M-4352 [1] PLATE ASSEM.  
  5M-7937 [4] DOWEL  
    (Part of 9M4352 Assem.)
  8S-0558 [1] RING (standard)  
    -OR-
  1S-5560 [1] RING (.015 in. oversize)  
  6P-8262 C [1] RING (.030 in. oversize)  
  6P-8263 C [3] RING (.030 in. oversize)  
  6P-8268 C [4] RING (.015 in. oversize)  
  2S-6443 [4] RING  
  9M-8273 [3] GEAR (23 TEETH)  
  7M-8384 [24] WASHER  
  4M-8807 [3] SPACER  
  4M-8817 [6] GEAR (19 TEETH)  
  4M-8809 [6] SHAFT  
  1S-9110 [24] BEARING ASSEM.  
  9M-4348 [1] CAGE  
  1S-1647 [1] SHAFT (35 TEETH)  
  2M-3412 [1] DOWEL  
  8H-8819 [1] RACE AND ROLLER ASSEM.  
  7M-1419 [1] RACE  
  9M-4318 [1] MANIFOLD ASSEM.  
  4M-8831 [1] GEAR (29 TEETH)  
  9M-8270 [1] GEAR (40 TEETH)  
  1A-2029 [12] BOLT  
  2M-4224 [6] LOCK  
  3P-3549 C [1] CAGE  
  4M-7835 [1] GEAR (138 TEETH)  
  9M-8271 [1] GEAR  
    (86 AND 138 TEETH)
  4M-7834 [1] GEAR (138 TEETH)  
  7M-1385 [12] DISC ASSEM.  
  3P-1686 R [11] PLATE  
  2S-6442 [3] RING (standard)  
    -OR-
  1S-5561 [3] RING (.015 in. oversize)  
  2S-6443 C [4] RING (standard)  
  9M-4395 [1] PISTON  
  8M-6541 [1] SEAL  
  8M-6538 [1] SEAL  
  1S-6470 [1] CARRIER ASSEM.  
  5M-7937 [2] DOWEL  
    (PART OF CARRIER ASSEM. 1S6470)
  8M-4988 [3] SEAL  
  7M-8383 [12] WASHER  
  1S-8544 [1] PISTON  
  4M-8793 [1] RACE AND ROLLER ASSEM.  
  4M-8794 [1] RACE  
  4M-7806 [1] RING  
  2M-4480 [1] RING  
  4F-2129 [1] BEARING ASSEM.  
  4M-7828 [3] RETAINER  
  2P-4417 C [2] RING  
  9H-0415 [1] RING  
  0S-0509 [6] BOLT  
  4M-8667 [3] LOCK  
  2K-1381 [1] RING  
  2M-3903 [1] RACE AND ROLLER ASSEM.  
  2M-3902 [1] RACE  
  1C-2251 [8] BOLT  
  1S-8468 [4] LOCK  
  1B-2522 [12] PIN  
  1S-8478 [12] SPRING  
  2P-4374 [6] RETAINER  
  9M-4355 [19] DAMPER  
  0S-0509 [12] BOLT  
  7F-6911 [6] LOCK  
  9S-8796 [1] PLATE ASSEM.  
  2D-6642 [1] BALL  
  5M-7937 [4] DOWEL  
    (PARTS OF PLATE ASSEM. 9S8796)
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0571S0232
 

7D-3580: TRANSMISSION CONTROL

TRANSMISSION CONTROL (7D3580 N/S)
Serial No. 80S1 to 80S50 inclusive
9S5191 Manual Switch parts are shown on Page 109. Refer also to Page 202 for special parts
c109079 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-5308 [1] HOUSING ASSEM.  
2. 3B-1915 [3] BOLT  
3. 3B-4506 [10] LOCKWASHER  
4. 4B-4278 [3] WASHER  
5. 7D-3449 [1] HOUSING  
6. 7D-3537 [1] ROD  
7. 2A-1736 [1] HANDLE  
8. 1B-8712 [1] KEY  
9. 4B-4283 [1] WASHER  
10. 7D-5284 [1] SHAFT  
11. 7D-3512 [1] SPACER  
12. 9S-5191 Y [1] SWITCH GROUP  
    (See Separate Illustration)
13. 7D-5487 [1] LEVER ASSEM.  
14. 0S-1587 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
15. 9L-1072 [3] BOLT  
16. 1D-4717 [7] NUT  
17. 0L-2070 [4] BOLT  
  4B-5271 [4] WASHER  
18. 5B-0986 [1] SCREW  
  1B-2578 [1] NUT  
19. 5D-6383 [1] PIN  
20. 7D-5289 [2] SPRING  
21. 5D-6366 [1] LEVER  
22. 1D-5117 [3] NUT  
  Y   SEPARATE ILLUSTRATION
 

#UEG0571S0233
 

7D-3580: TRANSMISSION CONTROL

TRANSMISSION CONTROL (7D3580 N/S)
Serial No. 80S51-Up
9S5191 Manual Switch parts are shown on Page 109. Refer also to Page 202 for special parts
c115695 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-1022 [1] HOUSING ASSEM.  
  9M-3914 C [2] BEARING  
2. 3B-1915 [3] BOLT  
3. 3B-4506 [10] LOCKWASHER  
4. 4B-4278 C [10] WASHER  
5. 7D-3449 [1] HOUSING  
6. 7D-3537 [1] ROD  
7. 2A-1736 [1] HANDLE  
8. 1B-8712 [1] KEY  
9. 4B-4283 [1] WASHER  
10. 7D-5284 [1] SHAFT  
11. 7D-3512 [1] SPACER  
12. 9S-5191 Y [1] SWITCH GROUP  
    (Separate Illustration)
13. 7D-5487 [1] LEVER ASSEM.  
14. 0S-1587 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
15. 0S-1619 C [3] BOLT  
16. 1D-4717 C [3] NUT  
17. 0S-1588 C [4] BOLT  
18. 5B-0986 [1] SCREW  
  1B-2578 [1] NUT  
19. 5D-6383 [1] PIN  
20. 7D-5289 [2] SPRING  
21. 5D-6366 [1] LEVER  
22. 1D-5117 [3] NUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0571S0234
 

3K-6559: PARKING BRAKE ASSEMBLY

3K6559 PARKING BRAKE ASSEMBLY (8M3846 N/S)
Part of 1P9676 Range Transmission Arrangement shown on Page 105
c150198 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9M-5140 [1] PLATE ASSEM.  
  9M-5138 [2] PIN  
  1B-4207 [2] NUT  
  3B-4512 [2] LOCKWASHER  
  5S-8542 [2] SHOE ASSEM.  
  7M-8291 H [1] LEVER  
  0S-1748 H [1] BOLT  
  1B-4203 H [1] NUT  
  3B-4506 H [1] LOCKWASHER  
  7F-9578 [1] SPRING  
  7F-9579 [1] SOCKET  
  7F-9571 [1] SCREW  
  9M-5141 [1] CAMSHAFT  
  9M-5142 [1] BRACKET  
  9M-5137 [1] BRACE  
  1S-8750 H [1] DRUM  
  0S-1566 H [4] BOLT  
  3B-4510 H [4] LOCKWASHER  
  9M-5139 [2] SPRING  
  2R-0050 [1] KIT  
    (CONSISTS OF A COMPLETE SET OF LININGS AND RIVETS)
  0S-1621 H [8] BOLT 25mm(1 in.)  
    -OR-
  6H-1717 HC [8] BOLT 29mm(1.125 in.)  
  3B-4508 H [8] LOCKWASHER  
  7F-9572 [1] NUT  
  C   INDICATES CHANGE
  H   NOT PART OF BRAKE ASSEM. 3K655
 

#UEG0571S0235
 

9S-5191: MANUAL SWITCH GROUP

9S5191 MANUAL SWITCH GROUP
Part of Transmission Control
c113000 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0V-0196 [5] BOLT  
2. 5M-2894 [9] WASHER  
3. 0S-0509 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
4. 5B-3718 [1] SEAL  
5. 9S-5221 [1] HARNESS ASSEM.  
6. 4K-8229 [10] TERMINAL  
    (Part of 9S5221 Harness Assem.)
7. 3D-4197 [1] COVER  
8. 7M-2082 [1] GASKET  
9. 0S-1619 [4] BOLT  
10. 8S-0607 [1] COVER  
11. 9S-5196 [1] SWITCH  
12. 1T-0416 [4] BOLT  
  9M-1974 [4] WASHER  
13. 5H-4279 [1] PLUG  
14. 8S-0632 [1] GASKET  
15. 8S-0564 [1] GEAR (99 Teeth)  
16. 1P-2560 [1] PLATE  
  7B-3028 [1] SCREW  
17. 8S-0608 [1] PLATE ASSEM.  
18. 1M-3735 [1] DOWEL  
19. 6K-3030 [1] BEARING  
    (Parts of 8S608 Plate Assem.)
20. 8S-0563 [1] GEAR (33 Teeth)  
21. 8S-0609 [1] CASE ASSEM.  
22. 7L-4993 [1] PIN  
23. 6K-3030 [1] BEARING  
24. 8H-8175 [1] BEARING  
    (Parts of 8S609 Case Assem.)
 

#UEG0571S0236
 

2P-1000: TRANSMISSION HYDRAULIC CONTROL

TRANSMISSION HYDRAULIC CONTROL (2P1000 N/S)--Top View--Part 1 of 2
Part of 1P9676 Range Transmission Arrangement shown on Page 105
8S698 & 3S6890 Valve parts are shown on Pages 113 & 114
c112888 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [1] BOLT  
2. 5M-2894 [13] WASHER  
3. 0L-2070 [1] BOLT  
4. 8S-3331 [1] ROD  
5. 5F-4899 [1] BOLT  
6. 1S-8489 [1] ELBOW  
7. 2S-5717 [1] NUT  
8. 0S-1594 [2] BOLT  
9. 2S-0484 [2] SLEEVE  
10. 8M-4389 [10] SEAL  
11. 3S-6890 Y [1] VALVE GROUP (Selector)  
    (See Separate Illustration)
12. 8S-0698 Y [1] VALVE GROUP (Pressure Control)  
    (See Separate Illustration)
13. 8M-8157 [2] SEAL  
14. 0T-0573 [1] BOLT  
15. 8S-0669 [1] SLEEVE  
16. 6F-0249 [1] SEAL  
17. 7M-1285 [1] STOP  
18. 7M-5915 [2] PIN  
19. 1B-4203 [2] NUT  
20. 9H-6673 [4] PIN  
  3B-4615 [4] COTTER PIN  
21. 9H-6672 [4] LINK  
22. 8M-4445 [3] SEAL  
23. 0L-1352 [2] BOLT  
24. 2S-1392 [2] SLEEVE  
25. 1S-3193 [1] ELBOW  
26. 2S-1357 [1] SLEEVE  
27. 8M-4437 [2] SEAL  
28. 2S-1457 [1] SLEEVE  
29. 0S-1571 [1] BOLT  
30. 1A-2029 [2] BOLT  
31. 7M-5919 [1] CAM  
32. 4M-1768 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0571S0237
 

2P-1000: TRANSMISSION HYDRAULIC CONTROL

TRANSMISSION HYDRAULIC CONTROL (2P1000 N/S)--End View--Part 2 of 2
Part of 1P9676 Range Transmission Arrangement shown on Page 105
8S647 Switch, 8S3330, 8S3333 Valve & 2P610 Cylinder parts are shown on Pages 112, 114 & 115
c112889 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-0647 Y [1] SWITCH GROUP  
    (See Separate Illustration)
2. 1B-8712 [1] KEY  
3. 8S-0633 [1] GASKET  
4. 9S-5222 [1] SPACER  
5. 1M-3863 [1] DETENT ASSEM.  
6. 9M-2022 [1] DOWEL  
    (Part of 1M3863 Assem.)
7. 9S-1366 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  0V-0531 [1] WASHER  
8. 7M-5916 [1] LEVER  
9. 7M-5915 [2] PIN  
10. 1B-4203 [2] NUT  
11. 5M-2894 [10] WASHER  
12. 5M-6214 [1] PLUG  
13. 7M-5917 [1] LEVER  
14. 0T-0573 [4] BOLT  
15. 9H-0223 [2] SEAL  
16. 4B-4283 [1] WASHER  
17. 0S-1571 [1] BOLT  
18. 1D-4717 [1] NUT  
19. 3B-4506 [6] LOCKWASHER  
20. 3B-1915 [1] BOLT  
21. 2P-0610 Y [1] CYLINDER GROUP  
    (See Separate Illustration)
22. 4H-1477 [2] PIN  
23. 3B-4615 [2] COTTER PIN  
24. 9H-6672 [2] LINK  
25. 1B-8706 [1] KEY  
26. 8S-3348 [1] LEVER  
27. 8S-9191 [1] BOLT  
28. 8S-0697 [1] SHAFT  
29. 0S-1590 [5] BOLT  
30. 4B-9783 [1] PLUG  
31. 8S-3333 Y [1] VALVE GROUP (Override Selector)  
    (See Separate Illustration)
32. 8M-4438 [13] SEAL  
33. 4M-5984 [1] MANIFOLD ASSEM.  
34. 2B-0858 [1] PLUG  
35. 5M-6192 [1] SEAT  
36. 4B-9782 [1] BALL  
37. 8M-8169 [1] SEAT  
    (Parts of 4M5984 Assem.)
38. 8M-4446 [5] SEAL  
39. 1S-3194 [1] MANIFOLD  
40. 0S-1594 [2] BOLT  
41. 8S-3330 Y [1] VALVE GROUP  
    (See Separate Illustration)
42. 9H-6673 [2] PIN  
43. 8M-1043 [7] SEAL ASSEM.  
  Y   SEPARATE ILLUSTRATION
 

#UEG0571S0238
 

8S-0647: SLAVE AND SYNCHRONIZING SWITCH

8S647 SLAVE AND SYNCHRONIZING SWITCH
Part of Transmission Hydraulic Control shown on Page 111
c204760 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0V-0196 [5] BOLT  
2. 5M-2894 [9] WASHER  
3. 0S-0509 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
4. 5B-3718 [1] SEAL  
5. 5S-3658 [1] HARNESS ASSEM.  
6. 4K-8229 [9] TERMINAL  
    (Part of 5S3658 Harness Assem.)
7. 3D-4197 [1] COVER  
8. 7M-2082 [1] GASKET  
9. 0S-1619 [4] BOLT  
10. 8S-0607 [1] COVER  
11. 3P-4945 C [1] SWITCH  
12. 1T-0416 [4] BOLT  
  9M-1974 [4] WASHER  
13. 5H-4279 [1] PLUG  
14. 8S-0632 [1] GASKET  
15. 8S-0565 [1] GEAR (99 Teeth)  
16. 8S-0608 [1] PLATE ASSEM.  
17. 1M-3735 [1] DOWEL  
18. 6K-3030 [1] BEARING  
    (Parts of 8S608 Plate Assem.)
19. 8S-0562 [1] GEAR (33 Teeth)  
20. 8S-0609 [1] CASE ASSEM.  
21. 7L-4993 [1] PIN  
22. 6K-3030 [1] BEARING  
23. 8H-8175 [1] BEARING  
    (Parts of 8S609 Case Assem.)
  C   INDICATES CHANGE
 

#UEG0571S0239
 

8S-0698: PRESSURE CONTROL VALVE GROUP

8S698 PRESSURE CONTROL VALVE GROUP
Part of Transmission Hydraulic Control shown on Page 110
c115962 UEG0571S
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-6214 [6] PLUG  
  2M-1168 [1] SLUG  
  4M-5920 [1] SPOOL  
  5M-9555 [1] SPOOL  
  5M-2504 [1] SLUG  
  0S-1594 [2] BOLT  
  8M-8157 [1] SEAL  
  8M-8622 [1] COVER  
  8M-4437 [1] SEAL  
  7M-5865 [1] SPRING  
  9S-8841 [1] SPOOL ASSEM.  
  8M-8157 [1] SEAL  
  4M-5915 [1] SPRING (RED STRIPE)  
  0S-1571 [6] BOLT  
  5M-2894 [6] WASHER  
  8S-0699 [1] COVER ASSEM.  
  8M-8515 [1] SEAL  
  8M-1109 [1] PISTON  
  8M-2482 [1] PLUG  
  8M-1078 [1] CHECK  
  8M-2483 [1] SPRING  
  5S-7001 C [2] SPACER (.036" THICK)  
  4M-1751 [3] SPACER (.016" THICK)  
  8M-1111 [1] SPRING (YELLOW STRIPE)  
  4M-5915 [1] SPRING (RED STRIPE)  
  4M-5918 [1] PLUG  
  2B-0858 [1] PLUG  
  4M-5893 [1] SPRING (OUTER)  
  4M-5912 [1] SPRING (INNER)  
  4M-5913 [1] PISTON  
  5S-7001 C [1] SPACER (.036" THICK)  
  4M-1751 [1] SPACER (.016" THICK)  
  5M-2504 [1] SLUG  
  8M-8565 [1] SPOOL  
  5M-9548 [1] SPRING  
  8M-4409 [1] RETAINER  
  8M-2538 [1] POPPET  
  7M-8592 [1] RING  
    (PARTS OF 9S8841 ASSEM.)
  5M-2504 [1] SLUG  
  4S-8746 WIRE 2 FEET  
  8M-1110 [1] SPOOL  
  4M-5919 [5] PLUG  
  [1] BODY ASSEM.  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
Filtration Procedure for Off-Highway Truck (769-793) Transmission Oil {0680, 0768, 3030, 3177}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Service Magazine

Caterpillar Parts SIS Catalog 772 :

Truck sale:

334,071 
Caterpillar 772, Off Highway Trucks, Construction
- Off Highway Trucks
FINNING CANADA
334,071 
Caterpillar 772, Off Highway Trucks, Construction
- Off Highway Trucks
FINNING CANADA
334,071 
Caterpillar 772, Off Highway Trucks, Construction
- Off Highway Trucks
FINNING CANADA
 
Caterpillar 772G, Off Highway Trucks, Construction
- Off Highway Trucks
ZEPPELIN BAUMASCHINEN
210,000 
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.