AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

FRONT AXLE (5D0230 N/S)-Top View Serial No. 89H901 to 89H1216 inclusive 12F MOTOR GRADER


POWER TRAIN
AXLE GP
HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP-CONTROL
VALVE GP-RELIEF
VALVE GP-CONTROL

MOTOR GRADER 12F MOTOR GRADER 89H
 NO. 12F MTR. GRADER 89H00901-01537 (MACHINE) UEG0573S 12F 89H   (1968)

POWER TRAIN

AXLE GP
REAR AXLE
2D-3460 REAR AXLE
REAR AXLE
7D-7630 REAR AXLE
FRONT AXLE
5D-0230 FRONT AXLE
FRONT AXLE
5D-0230 FRONT AXLE
FRONT AXLE
5D-0230 FRONT AXLE
FRONT AXLE
5D-0230 FRONT AXLE
 

#UEG0573S0140
 

5D-0230: FRONT AXLE

FRONT AXLE (5D0230 N/S)-Top View
Serial No. 89H901 to 89H1216 inclusive
c129220 UEG0573S
5D0230 FRONT AXLE Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [8] FITTING  
2. 4D-0905 [2] PIN  
  3B-4643 [2] COTTER PIN  
3. 3D-4524 [2] NUT  
  0S-1822 [2] WASHER  
4. 1B-4367 [2] BOLT  
  1D-4720 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  4D-0925 [2] LOCK  
5. 5D-4288 [1] PIN  
6. 5D-0212 [1] PIN  
7. 5D-0214 [1] BAR ASSEM.  
  5D-0244 [2] BEARING  
    (Part of 5D214 Bar Assem.)
8. 5D-0211 [1] PIN  
9. 4D-0913 [2] ARM  
  1B-4444 [2] NUT  
  3B-4632 [2] COTTER PIN  
10. 4D-0914 [4] SEAL  
11. 5F-9657 [4] SEAL ("O" Ring)  
12. 4D-3487 [2] WASHER  
13. 3B-4622 [2] COTTER PIN  
14. 1B-4438 [2] NUT  
15. 4D-0911 [2] BLOCK  
16. 4D-0904 [2] SCREW  
  3B-4621 [2] COTTER PIN  
17. 4D-0897 [1] ROD ASSEM. (Right Hand)  
18. 4D-0898 [1] ROD ASSEM. (Left Hand)  
19. 4D-0903 [2] RETAINER  
20. 4D-0899 [2] FORK  
21. 4F-7952 [2] SEAL  
    (1/2 each in 4D897 & 4D898 Rod Assem.)
22. 6H-1717 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
23. 5D-0213 [1] LOCK  
24. 4D-0927 [1] BLOCK  
25. 5D-0204 [1] AXLE ASSEM.  
26. 5D-0208 [1] PLATE  
27. 5D-4247 [2] END  
28. 3D-0369 [4] BEARING  
29. 5D-4541 [4] BEARING  
30. 5D-0206 [1] BRACKET  
31. 5D-4779 [1] ROD ASSEM.  
    (Parts of 5D204 Axle Assem.)
32. 5D-4598 [1] BRACKET  
    (Part of 5D4779 Rod Assem.)
33. 6D-2689 [1] WASHER  
 

#UEG0573S0141
 

5D-0230: FRONT AXLE

FRONT AXLE (5D0230 N/S)-Rear View
Serial No. 89H901 to 89H1216 inclusive
4J6633 Wheel Cylinder parts are shown on Page 96
c111776 UEG0573S
5D0230 FRONT AXLE Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-7340 [1] ARM ASSEM. (Left Hand)  
2. 3D-0371 [2] BEARING  
    (Part of 6D7340 Arm Assem.)
3. 5D-4346 [1] KNUCKLE (Left Hand)  
4. 3B-8485 [4] FITTING  
5. 3B-8489 [9] FITTING  
6. 2B-0947 [2] BOLT  
  1D-4719 [2] NUT  
7. 4D-0929 [1] ROD END  
8. 4D-0926 [2] PIN  
  3B-4643 [2] COTTER PIN  
9. 3B-8488 [2] FITTING  
10. 4J-6633 Y [1] CYLINDER GROUP  
    (See Separate Illustration)
11. 6D-7339 [1] ARM ASSEM. (Right Hand)  
12. 3D-0371 [2] BEARING  
    (Part of 6D7339 Arm Assem.)
13. 5D-4345 [1] KNUCKLE (Right Hand)  
14. 4D-0930 [1] ROD END  
15. 5D-4535 [1] PIN  
16. [2] PIN  
17. 0L-1169 [2] BOLT  
  1D-4720 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  4D-0925 [2] LOCK  
18. 5D-7461 [2] PIN  
19. 2H-3933 [2] SEAL ("O" Ring)  
  4D-0909 [2] SEAL  
20. 3D-3715 [2] CONE  
21. 2F-8207 [2] WASHER  
22. 1B-4157 [2] NUT  
  5D-4443 [2] PIN  
  3B-4615 [2] COTTER PIN  
23. 5D-4301 [2] CONE  
24. 7D-7837 [2] SEAL  
25. 9M-2092 [2] SEAL ("O" Ring)  
  4D-0907 [2] SEAL  
26. 4D-3463 [2] BEARING  
27. 3D-0372 [4] RING  
28. 3D-0373 [4] PLATE  
  Y   SEPARATE ILLUSTRATION
 

#UEG0573S0142
 

5D-0230: FRONT AXLE

FRONT AXLE (5D0230 N/S)-Top View
Serial No. 89H1217-Up
c138255 UEG0573S
5D0230 FRONT AXLE Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [8] FITTING  
2. 4D-0905 [2] PIN  
  3B-4643 [2] COTTER PIN  
3. 3D-4524 [2] NUT  
  0S-1822 [2] WASHER  
4. 1B-4367 [2] BOLT  
  1D-4720 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  4D-0925 [2] LOCK  
5. 5D-4288 [1] PIN  
6. 5D-0212 [1] PIN  
7. 5D-0214 [1] BAR ASSEM.  
  5D-0244 [2] BEARING  
8. 5D-0211 [1] PIN  
9. 4D-0913 [2] ARM  
  1B-4444 [2] NUT  
  3B-4632 [2] COTTER PIN  
10. 4D-0914 [4] SEAL  
11. 5F-9657 [4] SEAL ("O" Ring)  
12. 4D-3487 [2] WASHER  
13. 3B-4622 [2] COTTER PIN  
14. 1B-4438 [2] NUT  
15. 4D-0911 [2] BLOCK  
16. 4D-0904 [2] SCREW  
  3B-4621 [2] COTTER PIN  
17. 8D-0925 C [1] ROD ASSEM. (R.H.)  
  8D-0794 [1] ROD ASSEM.  
18. 4D-0903 [1] RETAINER  
19. 8D-0779 [1] FORK  
20. 5F-9657 [1] SEAL  
21. 8D-0926 C [1] ROD ASSEM. (L.H.)  
  8D-0796 [1] ROD ASSEM.  
22. 4D-0903 [1] RETAINER  
23. 8D-0779 [1] FORK  
24. 5F-9657 [1] SEAL  
25. 5D-0204 [1] AXLE ASSEM.  
26. 5D-0208 [1] PLATE  
27. 5D-4247 [2] END  
28. 3D-0369 [4] BEARING  
29. 5D-4541 [4] BEARING  
30. 5D-0206 [1] BRACKET  
31. 5D-4779 [1] ROD ASSEM.  
32. 5D-4598 [1] BRACKET  
33. 6D-2689 [1] WASHER  
34. 6H-1717 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
35. 5D-0213 [1] LOCK  
36. 4D-0927 [1] BLOCK  
  C   INDICATES CHANGE
 

#UEG0573S0143
 

5D-0230: FRONT AXLE

FRONT AXLE (5D0230 N/S)-Rear View
Serial No. 89H1217-Up
4J6633 Wheel Cylinder parts are shown on Page 96
c111776 UEG0573S
5D0230 FRONT AXLE Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-7340 [1] ARM ASSEM. (Left Hand)  
2. 3D-0371 [2] BEARING  
    (Part of 6D7340 Arm Assem.)
3. 5D-4346 [1] KNUCKLE (Left Hand)  
4. 3B-8485 [4] FITTING  
5. 3B-8489 [9] FITTING  
6. 2B-0947 [2] BOLT  
  1D-4719 [2] NUT  
7. 4D-0929 [1] ROD END  
8. 4D-0926 [2] PIN  
  3B-4643 [2] COTTER PIN  
9. 3B-8488 [2] FITTING  
10. 4J-6633 Y [1] CYLINDER GROUP  
    (See Separate Illustration)
11. 6D-7339 [1] ARM ASSEM. (Right Hand)  
12. 3D-0371 [2] BEARING  
    (Part of 6D7339 Arm Assem.)
13. 5D-4345 [1] KNUCKLE (Right Hand)  
14. 4D-0930 [1] ROD END  
15. 5D-4535 [1] PIN  
16. [2] PIN  
17. 0L-1169 [2] BOLT  
  1D-4720 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  4D-0925 [2] LOCK  
18. 5D-7461 [2] PIN  
19. 2H-3933 [2] SEAL ("O" Ring)  
  4D-0909 [2] SEAL  
20. 3D-3715 [2] CONE  
21. 2F-8207 [2] WASHER  
22. 1B-4157 [2] NUT  
  5D-4443 [2] PIN  
  3B-4615 [2] COTTER PIN  
23. 5D-4301 [2] CONE  
24. 7D-7837 [2] SEAL  
25. 9M-2092 [2] SEAL ("O" Ring)  
  4D-0907 [2] SEAL  
26. 4D-3463 [2] BEARING  
27. 3D-0372 [4] RING  
28. 3D-0373 [4] PLATE  
  Y   SEPARATE ILLUSTRATION
 

#UEG0573S0144
 

4J-6633: LEANING WHEEL CYLINDER GROUP

4J6633 LEANING WHEEL CYLINDER GROUP-4.75" Bore x 8.50" Stroke
Part of Front Axle shown on Page 95
UEG0573S0144 UEG0573S
4J6633 LEANING WHEEL CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UEG0573S0145
 

6D-6000: LEANING WHEEL CONTROL

LEANING WHEEL CONTROL (6D6000 N/S)
Control Valve Bank parts are shown on Page 98
c102039 UEG0573S
6D6000 LEANING WHEEL CONTROL Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-0679 [1] KNOB  
2. 5D-9274 [1] LEVER ASSEM.  
3. 2K-7979 [2] BEARING  
    (Part of 5D9274 Lever Assem.)
4. 7F-0548 [1] WASHER  
5. 3B-4629 [1] COTTER PIN  
6. 0S-1571 [1] BOLT  
7. 1D-4717 [2] NUT  
8. 3B-4506 [2] LOCKWASHER  
9. 6B-0933 [1] SPACER  
10. 5D-9136 [1] ROD ASSEM.  
11. 4D-4064 [2] END  
12. 5B-9079 [2] NUT  
    (Parts of 5D9136 Rod Assem.)
13. 0S-1591 [1] BOLT  
14. 0S-1587 [1] BOLT  
15. 3B-4508 [8] LOCKWASHER  
16. 7B-3235 [7] BOLT  
17. 6D-3745 [1] PLATE  
18. Y [1] VALVE BANK GROUP  
    (See Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#UEG0573S0146
 

6J-6701: CONTROL VALVE BANK

CONTROL VALVE BANK (6J6701 N/S)
Part of Leaning Wheel Control shown on Page 97
c102040 UEG0573S
6J6701 CONTROL VALVE BANK Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-7453 [1] SPACER  
2. 0S-1591 [1] BOLT  
3. 1D-4717 [1] NUT  
4. 5D-8861 [1] LEVER  
5. 1B-8702 [1] KEY  
6. 6J-7251 Y [1] VALVE GROUP  
    (See Separate Illustration)
7. 6J-6666 [1] MANIFOLD  
8. 3D-9348 [4] BOLT  
9. 3B-4508 [4] LOCKWASHER  
10. 0S-1588 [8] BOLT  
11. 3B-4506 [8] LOCKWASHER  
12. 2K-0190 [4] FLANGE  
13. 5F-1678 [6] SEAL  
14. 6F-5559 [2] SEAL  
15. 6J-6682 Y [1] VALVE GROUP  
    (See Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#UEG0573S0147
 

6J-6682: IMPLEMENT RELIEF VALVE GROUP

6J6682 IMPLEMENT RELIEF VALVE GROUP
Part of Control Valve Banks shown on Pages 98 and 312 through 330
c112706 UEG0573S
6J6682 IMPLEMENT RELIEF VALVE GROUP Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1142 [1] SPRING  
2. 0S-1588 [10] BOLT  
3. 3B-4506 [12] LOCKWASHER  
4. 2K-0190 [4] FLANGE  
  6J-6624 [1] BODY GROUP  
5. [1] BODY  
6. [1] VALVE  
7. 6J-6606 [1] SPACER  
8. 2H-3932 [1] SEAL  
9. 6J-9398 [1] COVER  
10. 1A-2029 [4] BOLT  
11. 9S-4684 [1] PLUG  
12. 3J-1907 [1] SEAL  
13. 9S-8002 [1] PLUG  
  3J-7354 [1] SEAL  
14. 3H-0107 [1] SEAL  
15. 2J-6089 [1] SPRING  
16. 5B-9628 [2] WASHER  
17. 5J-9260 [1] RETAINER  
  3J-7470 [7] SHIM (.048" Thick)  
  3J-7473 [9] SHIM (.005" Thick)  
18. 6F-5559 [1] SEAL  
19. 1J-8497 [1] VALVE  
20. 4J-0715 [1] BODY  
21. 0T-0320 [2] BOLT  
22. 3B-4507 [2] LOCKWASHER  
23. 5F-1678 [1] SEAL  
 

#UEG0573S0148
 

6J-7251: IMPLEMENT VALVE GROUP

6J7251 IMPLEMENT VALVE GROUP-R.H.-Controlled Flow-Type 1
Part of Control Valve Banks shown on Pages 98 and 312 through 330
c102080 UEG0573S
6J7251 IMPLEMENT VALVE GROUP Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-7489 [1] BEARING  
2. 1B-8702 [1] KEY  
3. 5J-7632 [1] SHAFT  
4. 3R-2437 [1] PLUG ASSEM.  
5. 6J-0001 [1] LEVER  
6. 5J-7401 [1] COVER  
7. 2H-3738 [1] BOLT  
8. 3B-4505 [1] LOCKWASHER  
9. 2B-2695 [4] BOLT  
  7H-3937 [4] LOCKWASHER  
10. 7F-8267 [1] SEAL  
11. 7B-3028 [1] SCREW  
12. 6J-0297 [1] PLATE  
13. 4J-4210 [4] RETAINER  
14. 6J-0063 [1] SPRING  
15. 0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
16. 5J-7340 [1] HOUSING  
17. 3H-1461 [1] SEAL  
18. 5F-1678 [2] SEAL  
19. 6F-5559 [1] SEAL  
20. 5J-7556 [1] VALVE  
21. 6J-1948 [1] SPRING  
22. 5J-7558 [1] PLUG ASSEM.  
23. 3D-2824 [1] SEAL  
    (Part of 5J7558 Plug Assem.)
24. 6J-0285 [1] BODY GROUP  
25. 4J-3043 [1] SEAL  
26. 4J-3044 [1] BEARING  
27. [1] STEM  
    (Parts of 6J285 Body Group)
28. 3J-5334 [2] PLUG ASSEM.  
  3J-1907 [2] SEAL  
    (1 in each 3J5334 Plug Assem.)
 

#UEG0573S0149
 

6J-7251: IMPLEMENT VALVE GROUP

6J7251 IMPLEMENT VALVE GROUP-R.H.-Controlled Flow-Type 2
Part of Control Valve Banks shown on Pages 98 and 312 through 330
c133274 UEG0573S
6J7251 IMPLEMENT VALVE GROUP Parts scheme
  For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] BEARING  
2. [1] KEY  
3. [1] SHAFT  
4. [1] PLUG  
5. [1] LEVER  
6. [1] COVER  
7. [1] BOLT  
8. [1] LOCKWASHER  
9. [4] BOLT  
  [4] LOCKWASHER  
10. [1] SEAL  
11. [1] SCREW  
12. [1] PLATE  
13. [4] RETAINER  
14. [1] SPRING  
15. [2] BOLT  
  [2] LOCKWASHER  
16. [1] HOUSING  
17. [1] SEAL  
18. [2] SEAL  
19. [1] SEAL  
20. [1] VALVE  
21. [1] SPRING  
22. [1] PLUG  
23. [1] SEAL  
24. [1] BODY GROUP  
25. [1] SEAL  
26. [1] BEARING  
27. [1] STEM  
28. [2] PLUG  
  [2] SEAL  
29. [1] SEAL  
 

Information:

Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog 12F :

FRONT WHEELS AND TIRES
5D-4610 FRONT WHEELS AND TIRES
HYDRAULIC WHEEL BRAKE
6D-2740 HYDRAULIC WHEEL BRAKE
BRAKE ASSEMBLY
5D-8415 BRAKE ASSEMBLY
POWER CYLINDER ASSEMBLY
6D-0689 POWER CYLINDER ASSEMBLY
MASTER CYLINDER ASSEMBLY
7D-5648 MASTER CYLINDER ASSEMBLY
MASTER POWER CYLINDER ASSEMBLY
7D-5649 MASTER POWER CYLINDER ASSEMBLY
HYDRAULIC BRAKE CONTROL GROUP
6D-8170 HYDRAULIC BRAKE CONTROL GROUP
HYDRAULIC BRAKE CONTROL GROUP
6D-8170 HYDRAULIC BRAKE CONTROL GROUP
FRONT AXLE
5D-0230 FRONT AXLE
FRONT AXLE
5D-0230 FRONT AXLE
FRONT AXLE
5D-0230 FRONT AXLE
LEANING WHEEL CYLINDER GROUP
4J-6633 LEANING WHEEL CYLINDER GROUP
LEANING WHEEL CONTROL
6D-6000 LEANING WHEEL CONTROL
CONTROL VALVE BANK
6J-6701 CONTROL VALVE BANK
IMPLEMENT RELIEF VALVE GROUP
6J-6682 IMPLEMENT RELIEF VALVE GROUP
IMPLEMENT VALVE GROUP
6J-7251 IMPLEMENT VALVE GROUP

Truck sale:

Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
 
Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
MUSTANG CAT
Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
 
Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
FABICK CAT
Caterpillar 312F, Raupenbagger, Bau-Und Bergbauausrüstung
149.800 
Caterpillar 312F, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
YANCEY BROS. CO.
Caterpillar 12F, Construction
13,000 
Caterpillar 12F, Construction
- motor graders
ALTORFER INC.
Caterpillar 312F GC, Construction
159,900 
Caterpillar 312F GC, Construction
- Crawler Excavators
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.