ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPSWITCH GP
SOLENOID GP
SWITCH GP
LIGHTING GP
BATTERY GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#UEG0589S0070
3P-0006: STARTING MOTOR GP-ELECTRIC
3P6 ELECTRIC STARTING MOTOR GROUP--Prestolite--24 Volt--Part 1 of 2
Serial No. 85J5227, 5230, 5231, 5234, 5235, 5237 and 85J5240-Up
Part of 7S4090 Starting Motor Group shown on Page 44A. 9S7976 Solenoid parts are shown on Page 46
Serial No. 85J5227, 5230, 5231, 5234, 5235, 5237 and 85J5240-Up
Part of 7S4090 Starting Motor Group shown on Page 44A. 9S7976 Solenoid parts are shown on Page 46
Parts for your 955K TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1D-5117 | [3] | NUT | |
2. | 3B-4508 | [6] | LOCKWASHER | |
3. | 085-2771 | [1] | CONNECTOR | |
4. | 4N-9404 C | [1] | LEAD ASSEM. | |
5. | 4N-4694 | [1] | KIT (Field Terminal Stud) | |
(Includes Stud, Bushing and Washers) | ||||
6. | 1D-4719 | [3] | NUT | |
7. | 9S-7976 Y | [1] | SOLENOID ASSEM. | |
(Separate Illustration) | ||||
8. | 6H-3622 | [4] | SCREW | |
3B-4504 | [4] | LOCKWASHER | ||
3K-6116 | [4] | WASHER | ||
9. | 4M-3217 | [2] | SCREW | |
10. | 4B-1220 | [3] | SCREW | |
11. | 8S-6035 | [1] | GASKET | |
12. | 3B-4502 | [4] | LOCKWASHER | |
13. | 8S-2769 | [1] | FIELD ASSEM. (Commutator End) | |
14. | 2B-4602 | [1] | PLUG | |
15. | 8S-4682 | [1] | KIT (Bearing and Wick) | |
16. | 4N-4693 | KIT (Commutator End Terminal Stud) | ||
(Includes Stud, Bushing and Washers) | ||||
17. | 1D-4717 | [1] | NUT (plain) | |
1B-2578 | [1] | NUT (jam) | ||
3B-4506 | [2] | LOCKWASHER | ||
C | INDICATES CHANGE | |||
Y | SEPARATE ILLUSTRATION |
#UEG0589S0071
3P-0006: STARTING MOTOR GP-ELECTRIC
3P6 ELECTRIC STARTING MOTOR GROUP--Prestolite--24 Volt--Part 2 of 2
Serial No. 85J5227, 5230, 5231, 5234, 5235, 5237 and 85J5240-Up
Part of 7S4090 Starting Motor Group shown on Page 44A
Serial No. 85J5227, 5230, 5231, 5234, 5235, 5237 and 85J5240-Up
Part of 7S4090 Starting Motor Group shown on Page 44A
Parts for your 955K TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4N-4691 | [1] | PLATE ASSEM. | |
2. | 4N-8618 C | [1] | KIT | |
(Includes 3 Brushes and 1 Clip) | ||||
4N-4692 | [1] | KIT | ||
(Includes 8 Springs) | ||||
3. | 2P-8825 C | [1] | SHIFT YOKE ASSEM. | |
4. | 2P-8817 | [1] | KIT (Yoke Adjusting) | |
(Includes Plugs, Pin, Gasket and Nut) | ||||
5. | 8S-1535 | [1] | KIT | |
(Includes 6 Plugs) | ||||
6. | 9S-6100 | [1] | ARMATURE ASSEM. | |
8S-8071 | [1] | KIT (Armature Thrust Washers) | ||
7. | 8S-4684 | [1] | KIT (Bearing and Wick) | |
8. | 8S-1543 | [1] | HOUSING ASSEM. (Pinion) | |
9. | 2B-4602 | [1] | PLUG | |
10. | 8S-2780 | [1] | KIT | |
(Includes 10 Insulations) | ||||
11. | 4N-4517 | [1] | POSITORK DRIVE ASSEM. | |
12. | 2H-3931 | [1] | SEAL | |
13. | 2P-8824 | [1] | HOUSING ASSEM. | |
2B-4602 | [1] | PLUG | ||
14. | 8S-2226 | [1] | BUSHING | |
15. | 8S-2225 | [1] | SEAL | |
16. | 2P-8816 | [1] | KIT (Includes Housing Screws) | |
17. | 3B-4504 | [7] | LOCKWASHER | |
18. | 4M-0189 | [1] | SEAL | |
19. | 4N-4690 | [1] | KIT (Field Coil) | |
(Includes Coils, Gaskets and Screws) | ||||
C | INDICATES CHANGE |
#UEG0589S0072
2P-2501: ELECTRIC STARTING MOTOR GROUP
2P2501 ELECTRIC STARTING MOTOR GROUP--Prestolite--24 Volt
Serial No. 85J4672 to 5226, 5228, 5229, 5232, 5233, 5236, 5238 and 85J5239 inclusive
Part of 7S4090 Starting Motor Group shown on Page 44A
9S7976 Solenoid parts shown on Page 46
Serial No. 85J4672 to 5226, 5228, 5229, 5232, 5233, 5236, 5238 and 85J5239 inclusive
Part of 7S4090 Starting Motor Group shown on Page 44A
9S7976 Solenoid parts shown on Page 46
Parts for your 955K TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9S-7976 Y | [1] | SOLENOID ASSEM. | |
(Separate Illustration) | ||||
2. | 6H-3622 | [4] | SCREW | |
3K-6116 | [4] | WASHER | ||
3. | 3B-4504 | [11] | LOCKWASHER | |
4. | 4B-1265 | [2] | SCREW | |
5. | 8S-1536 | [1] | COVER | |
6. | 8S-1537 | [1] | YOKE ASSEM. | |
7. | 8S-8069 | [1] | KIT (Yoke Cover Mounting) | |
(Consists of Screw, Washer & "O" Ring) | ||||
8. | 3B-4502 | [7] | LOCKWASHER | |
9. | 8S-8065 | [1] | KIT (Yoke Adjusting) | |
(Consists of Plug, Gasket, Pin & Nut) | ||||
10. | 8S-1533 | [1] | GASKET | |
11. | 2H-3931 | [1] | SEAL | |
12. | 8S-1535 | [1] | KIT (Consists of 6 Plugs) | |
13. | 8S-1541 | [1] | POSITORK DRIVE ASSEM. | |
14. | 8S-4680 | [1] | KIT (Consists of 10 Seals) | |
15. | 8S-1543 | [1] | HOUSING ASSEM. | |
16. | 8S-4684 | [1] | KIT (Bearing and Wick) | |
17. | 2B-4602 | [1] | PLUG | |
18. | 8S-1544 | [1] | HOUSING ASSEM. | |
19. | 2B-4602 | [1] | PLUG | |
20. | 8S-2226 | [1] | BUSHING | |
21. | 8S-2225 | [1] | SEAL | |
22. | 8S-8260 | [1] | KIT (Head and Housing Screw) | |
23. | 4M-0189 | [1] | SEAL | |
24. | 8S-8255 | [1] | KIT (Field Coil) | |
(Consists of Coils, Gaskets, Insulation & Screws) | ||||
25. | 8S-2780 | [1] | KIT (Consists of 10 Insulations) | |
26. | 4B-1220 | [3] | SCREW | |
27. | 8S-8071 | [1] | KIT (Armature Thrust Washers) | |
28. | 8S-6035 | [1] | GASKET | |
29. | 1D-5117 | [1] | NUT | |
30. | 3B-4508 | [4] | LOCKWASHER | |
31. | 1D-4719 | [3] | NUT | |
32. | 8S-4679 | [1] | KIT (Commutator End Terminal Stud) | |
(Consists of Stud, Washers & Bushings) | ||||
33. | 8S-1560 | [1] | LEAD ASSEM. | |
34. | 8S-2769 | [1] | HEAD ASSEM. (Commutator End) | |
35. | 8S-4682 | [1] | KIT (Bearing and Wick) | |
36. | 2B-4602 | [1] | PLUG | |
37. | 8S-2778 | [1] | KIT (Consists of 4 Brushes) | |
38. | 4B-1220 | [4] | SCREW | |
8H-0878 | [4] | LOCKWASHER | ||
39. | 8S-2790 | [1] | PLATE ASSEM. | |
40. | 9S-6100 | [1] | ARMATURE ASSEM. | |
41. | 1B-2578 | [1] | NUT | |
42. | 3B-4506 | [2] | LOCKWASHER | |
43. | 8S-4685 | [1] | KIT (Field Terminal Stud) | |
(Consists of Stud, Washers, Bushing & Insulation) | ||||
44. | 1D-4717 | [1] | NUT | |
45. | 8S-2771 | [1] | CONNECTOR | |
46. | 4B-1236 | [1] | SCREW | |
47. | 4M-3217 | [2] | SCREW | |
[1] | KIT (Pole) | |||
(Consists of 4 Shoes) | ||||
2P-1791 | [1] | KIT (Pole) | ||
(Consists of 8 Gaskets & 8 Screws) | ||||
(Not Shown) | ||||
Y | SEPARATE ILLUSTRATION |
#UEG0589S0073
6N-5123: SWITCH AS-SOLENOID
6N5123 SOLENOID SWITCH ASSEMBLY--24 Volt
Part of 2P2502 and 4N3182 Starting Motor Groups shown on Pages 45A and 119B
Part of 2P2502 and 4N3182 Starting Motor Groups shown on Pages 45A and 119B
Parts for your 955K TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7N-0908 C | [1] | TERMINAL ASSEM. | |
(Includes) | ||||
4M-1834 | [1] | PLATE | ||
2. | 7F-4907 | [1] | STRIP | |
3. | 3H-3681 | [2] | NUT | |
4. | 3B-4508 | [4] | LOCKWASHER | |
5. | 3H-3680 | [2] | NUT | |
6. | 7F-3494 | [2] | WASHER | |
7. | 4M-1836 | [2] | INSULATOR | |
8. | 4M-1837 | [2] | BUSHING | |
9. | 7N-0910 | [1] | TERMINAL ASSEM. | |
10. | 7N-0909 | [1] | TERMINAL ASSEM. | |
11. | 9S-4490 | [1] | GASKET | |
12. | 4M-5274 | [1] | SCREW | |
13. | 9S-4489 | [4] | SCREW ASSEM. | |
14. | 4M-3217 | [2] | SCREW | |
15. | 4M-1814 | [1] | CONTACT ASSEM. | |
16. | 3P-0072 | [1] | CASE ASSEM. | |
17. | 1F-0073 | [2] | CLIP | |
18. | 4M-1815 | [1] | SPRING | |
C | INDICATES CHANGE |
#UEG0589S0074
9S-7976: SOLENOID AS
9S7976 SOLENOID ASSEMBLY--24 Volt
Part of 7S5900, 2P2501, 2P6162 & 1P7839 Starting Motor Assemblies
shown on Pages 45, 45E, 119E & 120
Part of 7S5900, 2P2501, 2P6162 & 1P7839 Starting Motor Assemblies
shown on Pages 45, 45E, 119E & 120
Parts for your 955K TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9M-7657 C | [4] | NUT-SEALING | |
2. | 8S-8023 | [1] | COVER AS | |
3. | 8S-8024 | [1] | GASKET-COVER | |
4. | 9B-7235 | [1] | SCREW-MACHINE | |
9B-7233 | [1] | LOCKWASHER | ||
5. | 8S-1528 | [1] | BOOT | |
6. | 8S-8021 | [1] | CORE AS | |
THE FOLLOWING REPAIR | ||||
KITS ARE AVAILABLE: | ||||
8S-1524 | [1] | KIT-TERMINAL STUD (BATTERY) | ||
8S-1525 | [1] | KIT-TERMINAL STUD (MOTOR) | ||
9S-8688 | [1] | KIT-CONTACT END CORE | ||
8S-1527 | [1] | KIT-YOKE END CORE | ||
C | CHANGE FROM PREVIOUS TYPE |
#UEG0589S0075
7H-7290: SWITCH AS-DISCONNECT
7H7290 DISCONNECT SWITCH ASSEMBLY
Part of Battery and Wiring shown on Page 49
Part of Battery and Wiring shown on Page 49
#UEG0589S0076
8M-7677: LAMP GP-DASH
8M7677 DASH LAMP ASSEMBLY--24 Volt
Part of 7K8693 Battery and Wiring Group shown on Page 49
Part of 7K8693 Battery and Wiring Group shown on Page 49
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS#UEG0589S0077
9M-1305: LAMP GP
9M1305 DASH LAMP ASSEMBLY--24 Volt
Part of 7K8693 Battery and Wiring Group shown on Page 49
Part of 7K8693 Battery and Wiring Group shown on Page 49
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS#UEG0589S0078
7K-8693: BATTERY AND WIRING
BATTERY AND WIRING (7K8693 N/S)--24 Volt--Part 1 of 2
See Page 50 for Wiring Diagram
See Page 50 for Wiring Diagram
Parts for your 955K TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1B-4330 | [8] | NUT | |
2. | 3B-4504 | [8] | LOCKWASHER | |
3. | 4B-5269 | [8] | WASHER | |
4. | 4K-6697 | [2] | HOLDDOWN ASSEM. | |
5. | 5K-0829 | [1] | CABLE ASSEM. | |
6. | 2M-0912 | [1] | TERMINAL | |
7. | 2M-0913 | [1] | TERMINAL | |
8. | 8F-8513 | [1] | CLIP | |
9. | 4F-4879 | [1] | BOLT | |
10. | 0T-0102 | [4] | BOLT | |
11. | 3B-4506 | [9] | LOCKWASHER | |
12. | 3S-2093 | [2] | TIE | |
13. | 4B-4278 | [8] | WASHER | |
14. | 5K-6971 | [4] | BRACKET ASSEM. | |
15. | 9F-2978 | [4] | NUT | |
(1 in each 5K6971 Assem.) | ||||
16. | 0S-1594 | [4] | BOLT | |
17. | 5K-7088 | [1] | CABLE ASSEM. | |
18. | 2M-0912 | [2] | TERMINAL | |
19. | 3H-5264 | [4] | CLIP | |
20. | 0S-1621 | [1] | BOLT | |
21. | 3B-4508 | [5] | LOCKWASHER | |
22. | 1B-8074 | [1] | WASHER | |
23. | 7K-9178 H | [1] | HARNESS ASSEM. | |
4S-8732 | CONDUIT 56" | |||
7K-9186 | [2] | FERRULE | ||
24. | 4K-6494 | [1] | TERMINAL | |
25. | 6K-5125 | [1] | TERMINAL | |
26. | 2L-8049 | [1] | TERMINAL | |
27. | 4S-9261 | [2] | BATTERY | |
28. | 5S-8405 | [12] | PLUG | |
(6 in each 4S9261 Battery) | ||||
29. | 4K-3087 | [2] | MAT | |
30. | 4K-5715 | [8] | BOLT | |
3B-4604 | [8] | COTTER PIN | ||
31. | 2D-1247 | [1] | CLIP | |
32. | 0S-1620 | [4] | BOLT | |
33. | 7K-9177 | [1] | WIRE ASSEM. | |
H | ORDER BY THE FOOT |
#UEG0589S0079
7K-8693: BATTERY AND WIRING
BATTERY AND WIRING (7K8693 N/S)--24 Volt--Part 2 of 2
7H7290 Switch, 8M7677 & 9M1305 Lamps and 7K9179 Harness parts are shown on Pages 46, 47 and 51
See Page 50 for Wiring Diagram
7H7290 Switch, 8M7677 & 9M1305 Lamps and 7K9179 Harness parts are shown on Pages 46, 47 and 51
See Page 50 for Wiring Diagram
Parts for your 955K TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5K-7099 | [1] | CABLE ASSEM. | |
2. | 1S-4915 | [2] | LINER | |
2M-0912 | [1] | TERMINAL | ||
3. | 5M-9204 | [1] | TERMINAL ASSEM. (+) | |
4. | 2D-8788 | [1] | BOLT | |
2D-8787 | [1] | NUT | ||
(1 each in 5M9204, 5M9205 & 3D2098 Assem.) | ||||
5. | 5K-9375 | [1] | CABLE ASSEM. | |
5M-9205 | [1] | TERMINAL (-) | ||
6. | 3D-2098 | [1] | TERMINAL ASSEM. | |
7. | 5K-7072 | [1] | COVER (L.H.) | |
8. | 7F-6429 | [1] | AMMETER | |
9. | 7S-6402 | [1] | SWITCH (Light) | |
10. | 7S-5432 | [1] | KNOB | |
11. | 4K-8030 | [2] | CLIP | |
12. | 3H-4105 | [1] | CIRCUIT BREAKER | |
13. | 3K-9520 | [2] | GROMMET | |
14. | 5M-6668 | [2] | SCREW | |
15. | 3B-4501 | [2] | LOCKWASHER | |
16. | 9M-1305 Y | [1] | LAMP ASSEM. | |
(See Separate Illustration) | ||||
17. | 7K-9179 Y | [1] | HARNESS ASSEM. | |
18. | 8M-7677 Y | [1] | LAMP ASSEM. | |
(See Separate Illustration) | ||||
19. | 8H-8648 | [1] | PLATE (Instruction) | |
20. | 7H-7290 Y | [1] | SWITCH ASSEM. | |
(See Separate Illustration) | ||||
21. | 5K-2158 | [1] | CABLE ASSEM. | |
22. | 2M-0913 | [1] | TERMINAL | |
23. | 3D-2098 | [1] | TERMINAL ASSEM. | |
24. | 8S-7713 | [1] | SWITCH ASSEM. (Heat-Start) | |
8F-3437 | [1] | LEVER | ||
5L-7200 | [1] | SCREW | ||
3B-4501 | [1] | LOCKWASHER | ||
25. | 0T-0102 | [3] | BOLT | |
3B-4506 | [3] | LOCKWASHER | ||
26. | 4B-4278 | [2] | WASHER | |
27. | 5F-5990 | [3] | CLIP | |
28. | 7K-8861 | [1] | COVER (R.H.) | |
7K-9174 | [1] | PLATE (Wiring Diagram) | ||
7F-2770 | [1] | ADHESIVE | ||
(Not Shown-Mounted inside Battery Box Door) | ||||
Y | SEPARATE ILLUSTRATION |
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
General Service Information
Engine News
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Disassembly and Assembly
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
1987/03/16
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
1992/04/06