AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7S8831 FUEL PUMP HOUSING GROUP--Type 2 Part of Fuel Pump Housing and Governor shown on Page 29 941 TRACK LOADER


FUEL SYSTEM
PUMP GP-FUEL TRANSFER
LINES GP-FUEL
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
FILTER GP-ENGINE OIL
COOLING SYSTEM
COOLER GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

TRACK LOADER 941 TRACK LOADER 80H
 941B TRAXCAVATOR 80H03040-03883 (MACHINE) UEG0596S 941 80H   (1971)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
FUEL PUMP HOUSING AND GOVERNOR
7S-9334 FUEL PUMP HOUSING AND GOVERNOR
FUEL TRANSFER PUMP GROUP
7S-4430 FUEL TRANSFER PUMP GROUP
FUEL PUMP HOUSING GROUP
7S-8831 FUEL PUMP HOUSING GROUP
FUEL PUMP HOUSING GROUP
7S-8831 FUEL PUMP HOUSING GROUP
 

#UEG0596S0050
 

7S-8831: FUEL PUMP HOUSING GROUP

7S8831 FUEL PUMP HOUSING GROUP--Type 2
Part of Fuel Pump Housing and Governor shown on Page 29
c115925 UEG0596S
7S8831 FUEL PUMP HOUSING GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-0411 [4] BONNET  
  8H-9204 [4] WASHER  
  2M-4314 [4] BUSHING  
  9B-1363 [4] SPRING  
  9H-5746 [4] CHECK  
  1M-3506 [4] RING  
  9H-5797 [4] PLUNGER AND BARREL ASSEM.  
  1S-0206 [4] SPRING  
  9H-5729 [4] WASHER  
  3S-9735 [4] LIFTER ASSEM.  
  4M-1474 [2] PIN  
  4F-6024 [2] DOWEL  
  1S-1953 [1] BEARING  
    (Parts of Housing Assem. 7S8830
  8H-9208 [1] DOWEL  
    (Part of Gear Assem. 5S5058)
  1S-0214 [1] SPRING  
  2S-7905 [1] PLUG  
    (Part of Housing Assem. 7S8830)
  0L-0472 [1] BOLT  
  2H-3504 [1] LOCK  
  8H-9208 [1] DOWEL  
    (Part of Camshaft Assem. 8H9207)
  7M-5940 [1] PLATE  
  5S-5058 [1] GEAR ASSEM.  
    (66 Teeth)
  2A-3746 [1] PLUG  
  2M-8604 [1] BEARING  
  2S-7905 C [1] PLUG  
    (Parts of Housing Assem. 7S8830)
  1M-1077 [4] SEAL  
  1P-0233 C [4] DOWEL  
  1P-0231 C [4] BALL  
  1P-0234 C [4] DOWEL  
  1P-0232 C [4] BALL  
    (Parts of Housing Assem 7S8830)
  2M-4208 [4] SPACER (.174 Thick)  
  2M-4209 [4] SPACER (.178" Thick)  
  2M-4210 [4] SPACER (.182" Thick)  
  2M-4211 [4] SPACER (.186" Thick)  
  2M-4212 [4] SPACER (.190" Thick)  
  5M-2691 [4] SPACER (.194" Thick)  
  5M-2697 [4] SPACER (.170" Thick)  
  5S-7189 [4] SPACER (.198" Thick)  
    (Use as required)
  9H-1296 [1] BEARING  
    (Part of Housing Assem. 7S8830)
  2S-0825 [1] RACK  
  9H-1284 [1] BEARING  
    (Part of Housing Assem. 7S8830)
  1M-0690 [1] SLEEVE  
    (Part of Camshaft Assem 8H9207)
  8H-9207 [1] CAMSHAFT ASSEM.  
  7S-8830 [1] HOUSING ASSEM.  
  C   INDICATES CHANGE
 

#UEG0596S0051
 

5S-9922: FUEL INJECTION VALVE AND LINES

FUEL INJECTION VALVE AND LINES (5S9922 N/S)
Serial No. 80H3040 to 3193, 3195, 3197, 3199, 3235, 3252, 3254 to 3265, 3267 to 3280, 3283 & 80H3284 inclusive
c114301 UEG0596S
5S9922 FUEL INJECTION VALVE AND LINES Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] LINE ASSEM. (No. 4)  
2. [1] LINE ASSEM. (No. 3)  
3. [1] LINE ASSEM. (No. 2)  
4. [1] LINE ASSEM. (No. 1)  
5. [4] NUT  
6. [4] BODY  
7. [4] VALVE SERVICE GROUP  
8. [1] SEAL ASSEM.  
9. [1] SEAL  
10. C [1] FITTING  
11. [1] CLIP  
12. [1] TUBE  
13. [1] BOLT (1.125" Long)  
14. [5] LOCKWASHER  
15. [2] SEAL  
16. [1] BOLT (1.125" Long)  
17. [1] BRACKET  
18. [1] COVER  
  [1] GASKET  
19. [1] SEAL  
20. [2] BOLT (1" Long)  
21. [1] BOLT (4" Long)  
  [1] LOCKWASHER  
22. [1] BOLT (1.75" Long)  
23. [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0596S0052
 

5S-9922: FUEL INJECTION VALVES AND LINES GROUP

5S9922 FUEL INJECTION VALVES AND LINES GROUP
Serial No. 80H3194, 3196, 3198, 3200 to 3234, 3236 to 3251, 3253, 3266, 3281, 3282 and 80H3285-Up
c166557 UEG0596S
5S9922 FUEL INJECTION VALVES AND LINES GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7214 [1] LINE ASSEM. (No. 4)  
2. 5S-7213 [1] LINE ASSEM. (No. 3)  
3. 5S-7212 [1] LINE ASSEM. (No. 2)  
4. 5S-7211 [1] LINE ASSEM. (No. 1)  
5. 5H-7225 [4] NUT  
6. 8S-2389 [4] BODY  
7. 8M-1584 [4] VALVE SERVICE GROUP  
8. 6F-1069 [1] SEAL ASSEM.  
9. 5B-3718 [1] SEAL  
10. 1P-9328 [1] FITTING  
11. 9S-1350 [1] CLIP  
12. 5S-7223 [1] TUBE  
13. 1A-2029 [1] BOLT 2.86 cm(1.125 in.) long  
14. 3B-4506 [5] LOCKWASHER  
15. 8M-5248 [2] SEAL  
16. 8M-5260 [1] SEAL  
17. 2P-3949 C [1] BRACKET  
18. 5M-3154 [1] COVER  
  7H-3270 [1] GASKET  
19. 8M-5253 [1] SEAL  
20. 0S-1594 C [3] BOLT 2.54 cm(1 in.) long  
21. 1B-2886 C [1] BOLT 9.53 cm(3.75 in.) long  
  3B-4508 [1] LOCKWASHER  
22. 0S-1571 [1] BOLT 4.45 cm(1.75 in.) long  
  C   INDICATES CHANGE
 

#UEG0596S0053
 

5S-6446: OIL PUMP GROUP

5S6446 OIL PUMP GROUP
c118304 UEG0596S
5S6446 OIL PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2029 [2] BOLT  
  7H-1861 [2] LOCK  
2. 6H-4208 [1] LOCK  
3. 0S-1590 [4] BOLT  
4. 2P-2221 C [1] ELBOW ASSEM.  
5. 4B-3938 [2] PLUG  
6. 0S-1594 [2] BOLT  
7. 8S-9300 [1] BELL ASSEM.  
8. 8M-0904 [1] GASKET  
9. 7S-1849 Y [1] PUMP ASSEM.  
    (Separate Illustration)
10. 8S-8874 [1] LOCK  
11. 0T-0329 [1] LOCK  
12. 7H-1796 [1] GASKET  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0596S0054
 

7S-1849: OIL PUMP ASSEMBLY

7S1849 OIL PUMP ASSEMBLY
Part of Oil Pump
c114316 UEG0596S
7S1849 OIL PUMP ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8S-0488 [1] BODY ASSEM.  
  8S-6511 [2] BEARING  
    (PART OF 8S488 BODY ASSEM.)
  0S-1619 [1] BOLT  
  0L-0364 [1] LOCK  
  0L-1352 [2] BOLT  
  8S-8871 [1] LOCK  
  5B-9603 [1] BOLT  
  0L-0364 [1] LOCK  
  2H-3755 [2] BOLT  
  2A-5328 [2] LOCK  
  2S-9529 [1] PLUNGER  
  1S-3921 [1] SPRING  
  8S-0495 [1] COVER  
  1B-8709 C [1] KEY  
  1P-6901 C [1] SPACER  
  1M-3735 [2] DOWEL  
    (PART OF 8S488 BODY ASSEM.)
  4B-9880 [1] BALL  
  1F-1006 [1] DOWEL  
    (PARTS OF 8S485 BODY ASSEM.)
  9S-1160 [1] BEARING  
    (PART OF 9S1179 GEAR ASSEM.)
  7S-6309 [1] SHAFT ASSEM.  
    (PART OF 8S485 BODY ASSEM.)
  6F-7172 [1] DOWEL  
    (PART OF 7S6309 SHAFT ASSEM.)
  9S-1179 [1] GEAR ASSEM.  
    (60 TEETH-IDLER)
  9S-3040 C [1] SHAFT ASSEM.  
    (8 TEETH)
  3B-6734 [1] NUT  
  6B-0863 [1] WASHER  
  3B-4617 [1] COTTER PIN  
  8M-5599 C [1] KEY  
  8S-0497 [1] GEAR  
    (40 TEETH-DRIVE)
  8S-0493 [1] SHAFT ASSEM.  
    (8 TEETH)
  8S-6511 [2] BEARING  
    (PART OF 8S485 BODY ASSEM.)
  8S-0485 [1] BODY ASSEM.  
  8S-0491 [2] GEAR  
    (8 TEETH)
  C   INDICATES CHANGE
 

#UEG0596S0055
 

5S-6683: OIL FILTER AND LINES GROUP

5S6683 OIL FILTER AND LINES GROUP
Serial No. 80H3040 to 80H3085 and 80H3087 to 80H3091 inclusive
c114300 UEG0596S
5S6683 OIL FILTER AND LINES GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 C [3] BOLT (1.25" Long)  
2. 3B-4506 [13] LOCKWASHER  
3. 3B-1915 [5] BOLT (1.37" Long)  
4. 1D-4717 [4] NUT  
5. 4B-4278 [5] WASHER  
6. 0S-1571 [1] BOLT (1.75" Long)  
7. 9S-1806 Y [1] FILTER ASSEM.  
    (See Separate Illustration)
8. 7S-6654 [1] TUBE ASSEM.  
    (Oil Filter Outlet)
9. 7F-7590 [1] GASKET  
10. 1P-9307 [1] TUBE ASSEM.  
    (Oil Filter Inlet)
11. 0S-1590 [1] BOLT (2" Long)  
12. 1A-2029 C [3] BOLT (1.12" Long)  
13. 2M-5407 [1] GASKET  
14. 9H-6067 [2] SEAL  
15. 7S-3912 [1] CLIP  
16. 7S-3913 [1] CLIP  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0596S0056
 

9S-1806: OIL FILTER ASSEMBLY

9S1806 OIL FILTER ASSEMBLY
Serial No. 80H3040 to 80H3085 and 80H3087 to 80H3091 inclusive
Part of 5S6683 Oil Filter and Lines Group
c124221 UEG0596S
9S1806 OIL FILTER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-6636 [1] SCREW  
  1K-0505 [1] WASHER  
2. 9M-0853 [1] PLUNGER  
3. 0S-1618 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
4. 6B-0830 [1] COVER  
5. 6F-8007 [1] SPRING  
6. 7S-6744 [1] GASKET  
7. 2J-6356 [1] RING  
8. 7S-6745 [1] RETAINER  
9. 7S-6746 [1] SPRING  
10. 2H-8829 [1] PLUG  
  6F-7062 [1] WASHER  
11. 5S-0484 [1] ELEMENT ASSEM. (Disposable)  
12. 5S-7128 [1] CASE ASSEM.  
13. 2M-8691 [1] GASKET  
14. 5H-9899 [1] RING  
15. 3H-4970 [1] SEAL  
16. 9S-1770 [1] BASE ASSEM.  
17. 1B-5174 [2] PLUG  
    (Part of 9S1770 Base Assem.)
 

#UEG0596S0057
 

2P-0683: OIL FILTER COOLER AND LINES GROUP

2P683 OIL FILTER, COOLER AND LINES GROUP
Serial No. 80H3086 and 80H3092-Up
c114411 UEG0596S
2P0683 OIL FILTER COOLER AND LINES GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-3206 [1] PIPE  
2. 1A-2029 [9] BOLT (1.125" Long)  
3. 3B-4506 [13] LOCKWASHER  
4. 7S-3913 [1] CLIP  
5. 1A-9579 [3] BOLT  
6. 3B-4505 [4] LOCKWASHER  
  4B-4277 [4] WASHER  
7. 9H-6067 [2] SEAL  
8. 0S-1588 [2] BOLT (1.25" Long)  
9. 7F-7590 [1] GASKET  
10. 7S-6654 [1] TUBE ASSEM.  
11. 2P-0686 Y [1] FILTER GROUP  
    (See Separate Illustration)
12. 1P-9307 [1] TUBE ASSEM.  
13. 0S-1590 [1] BOLT  
14. 2M-5407 [1] GASKET  
15. 4B-4278 [1] WASHER  
16. 0S-1591 [1] BOLT (1.50" Long)  
17. 1D-4540 [1] BOLT  
18. 7S-3912 [1] CLIP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0596S0058
 

2P-0686: OIL FILTER GROUP

2P686 OIL FILTER GROUP
Serial No. 80H3086 and 80H3092-Up
Part of 2P683 Oil Filter, Cooler and Lines Group
c114412 UEG0596S
2P0686 OIL FILTER GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] BASE ASSEM.  
  [1] PLUG (.50" Thread)  
2. [3] PLUG (.75" Thread)  
3. [2] GASKET  
4. [2] SPRING  
  [2] PLUNGER  
5. [2] COVER  
6. [4] BOLT  
  [4] LOCKWASHER  
7. [1] STUD  
8. [1] FILTER ASSEM.  
 

#UEG0596S0059
 

7S-4090: STARTING MOTOR GP-ELECTRIC

7S4090 STARTING MOTOR GROUP--24 Volt--Type 1
Serial No. 80H3040 to 3251, 3253 to 3256 and 80H3266 inclusive
7S5900 Motor parts are shown on Page 42
Refer also to Page 112 for special parts
c114226 UEG0596S
7S4090 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4H-7869 [1] GASKET  
  8S-2332 C [3] BOLT  
  3B-4510 C [3] LOCKWASHER  
  7S-5900 Y [1] MOTOR ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  7H-1181 [1] TERMINAL  
    (PART OF WIRE ASSEM. 9F4337)
  9F-4337 [1] WIRE ASSEM.  
  9F-5509 [2] INSULATOR  
  7F-8032 [1] TERMINAL (GROUND)  
    (PARTS OF WIRE ASSEM. 9F4337)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250}
Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Transfer Pump<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Fuel Transfer Pump<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Fuel Transfer Pump<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Fuel Transfer Pump (4N4864)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Fuel Transfer Pump
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
Two Fuel Pressure Pumps Are Available To Increase Fuel Pressure{1250,1295}
1979/05/14
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 941 :

FUEL PUMP HOUSING GROUP
7S-8831 FUEL PUMP HOUSING GROUP
PUMP ASSEMBLY
9H-2256 PUMP ASSEMBLY
FUEL FILTER GROUP
5S-9666 FUEL FILTER GROUP
FUEL TRANSFER PUMP GROUP
7S-4430 FUEL TRANSFER PUMP GROUP
SERVICE METER DRIVE GROUP
2P-6158 SERVICE METER DRIVE GROUP
SERVICE METER GROUP
2P-6478 SERVICE METER GROUP
FUEL PRIMING PUMP GROUP
5S-2100 FUEL PRIMING PUMP GROUP
SERVICE METER GROUP
9S-5141 SERVICE METER GROUP
FUEL INJECTION VALVE AND LINES
5S-9922 FUEL INJECTION VALVE AND LINES
FUEL INJECTION VALVES AND LINES GROUP
5S-9922 FUEL INJECTION VALVES AND LINES GROUP
OIL PUMP GROUP
5S-6446 OIL PUMP GROUP
OIL PUMP ASSEMBLY
7S-1849 OIL PUMP ASSEMBLY
OIL FILTER AND LINES GROUP
5S-6683 OIL FILTER AND LINES GROUP
OIL FILTER ASSEMBLY
9S-1806 OIL FILTER ASSEMBLY
OIL FILTER COOLER AND LINES GROUP
2P-0683 OIL FILTER COOLER AND LINES GROUP
OIL FILTER GROUP
2P-0686 OIL FILTER GROUP

Truck sale:

Caterpillar 941, Construction
3,000 
Caterpillar 941, Construction
- track loaders
MICHIGAN CAT
7038 - CAT 941
 
7038 - CAT 941

avspare
1974 CAT 941
USD $13,750 
1974 CAT 941

WESTERN MICHIGAN EQUIPMENT
Traverse City, Michigan
1980 CAT 941
Call 
1980 CAT 941

DDG Equipment
1974 CAT 941
USD $5,500 
1974 CAT 941

RP Equipment
Allentown, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.