AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

LIFT CYLINDER LINES (7K4878 N/S)--Part 2 of 2 Serial No. 80H3158-Up 941 TRACK LOADER


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER
CYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
IMPLEMENTS
CONTROL GP

TRACK LOADER 941 TRACK LOADER 80H
 941B TRAXCAVATOR 80H03040-03883 (MACHINE) UEG0596S 941 80H   (1971)

HYDRAULIC SYSTEM

CYLINDER GP
7K-4878 LINES GP-CYLINDER
LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
LIFT CYLINDER AND SEAL GROUP
7J-9861 LIFT CYLINDER AND SEAL GROUP
LIFT CYLINDER GROUP
7J-9862 LIFT CYLINDER GROUP
TILT CYLINDER AND SEAL GROUP
7K-9409 TILT CYLINDER AND SEAL GROUP
 

#UEG0596S0160
 

7K-4878: LINES GP-CYLINDER

LIFT CYLINDER LINES (7K4878 N/S)--Part 2 of 2
Serial No. 80H3158-Up
c138731 UEG0596S
7K4878 LINES GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0190 [6] FLANGE  
2. 4J-5267 C [6] SEAL  
3. 8K-7487 C [1] HOSE ASSEM.  
  9S-0247 H HOSE 35.00"  
  3S-8363 [1] STEM ASSEM. (90 degrees)  
4. 7S-9371 [1] STEM ASSEM. (90 degrees)  
5. 3S-7166 [2] SLEEVE  
6. 7K-0647 [1] HOSE ASSEM.  
  9S-0671 H HOSE 29.40"  
7. 3S-8606 [2] SLEEVE  
8. 8S-6457 [2] STEM ASSEM.  
9. 0S-1594 [6] BOLT  
10. 3B-4506 C [20] LOCKWASHER  
11. 7K-4862 [1] TUBE ASSEM. (L.H.)  
  5K-9473 [1] CLIP  
12. 1A-2029 [8] BOLT  
13. 8K-7485 C [1] HOSE ASSEM.  
  9S-0247 H HOSE 47.80"  
14. 3S-7166 [2] SLEEVE  
15. 3S-8363 [2] STEM ASSEM. (90 degrees)  
16. 0S-1588 C [8] BOLT  
17. 4J-8996 [4] SEAL  
18. 0S-1571 [4] BOLT  
19. 6K-7446 [2] SPACER  
20. 0S-0509 [2] BOLT  
21. 7K-4861 [1] TUBE ASSEM. (R.H.)  
22. 5K-9473 [1] CLIP  
23. 7K-0646 [1] HOSE ASSEM.  
  9S-0671 H HOSE 46.40"  
  8S-6457 [1] STEM ASSEM. (90 degrees)  
24. 8S-6459 [1] STEM ASSEM. (Straight)  
25. 3S-8606 [2] SLEEVE  
26. 1D-4717 [2] NUT  
27. 6K-7467 [1] CLAMP  
28. 4B-3388 C [4] BOLT  
  3B-4505 [4] LOCKWASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#UEG0596S0161
 

6K-4145: LINES GP-TILT CYLINDER

TILT CYLINDER LINES (6K4145 N/S)--As Viewed from R.H. Side of Machine--Part 1 of 2
c114416 UEG0596S
6K4145 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4539 C [16] BOLT  
2. 1D-4716 [32] NUT  
3. 3B-4505 C [32] LOCKWASHER  
4. 6K-4033 [1] TUBE ASSEM. (R.H.-Outer)  
  6K-4034 [1] TUBE ASSEM. (L.H.-Outer)  
5. 0S-1588 [16] BOLT  
6. 3B-4506 [32] LOCKWASHER  
7. 1A-9579 [16] BOLT  
8. 6K-4057 [1] TUBE ASSEM. (R.H.-Inner)  
  6K-4058 [1] TUBE ASSEM. (L.H.-Inner)  
    (To Cylinder Rod End)
  4J-5267 [4] SEAL  
9. 5K-8497 [2] BRACKET (R.H.)  
  5K-8498 [2] BRACKET (L.H.)  
10. 0S-1594 [8] BOLT  
11. 4B-4278 [16] WASHER  
12. 7K-0648 [4] HOSE ASSEM.  
  9S-0671 H HOSE 32.20"  
13. 8S-7240 H GUARD 29"  
14. 3S-8606 [2] SLEEVE  
15. 8S-6457 [2] STEM ASSEM.  
16. 5B-5620 C [16] BOLT  
17. 6K-3922 [4] SPACER  
18. 1P-4575 C [24] FLANGE  
19. 4J-8996 [20] SEAL  
20. 0T-0320 [8] BOLT  
  9M-5048 [8] NUT  
  4B-4279 [8] WASHER  
21. 6K-4031 [1] TUBE ASSEM. (R.H.-Inner)  
  6K-4032 [1] TUBE ASSEM. (L.H.-Inner)  
22. 3B-1915 [8] BOLT  
  4J-8265 [8] NUT  
23. 6K-3923 [4] SPACER  
24. 6K-3920 [2] SPACER  
25. 0L-1351 [8] BOLT  
26. 6K-3924 [4] BRACKET  
27. 6K-3921 [2] SPACER  
28. 6K-4055 [1] TUBE ASSEM. (R.H.-Outer)  
  6K-4056 [1] TUBE ASSEM. (L.H.-Outer)  
    (To Cylinder Head End)
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#UEG0596S0162
 

6K-4145: LINES GP-TILT CYLINDER

TILT CYLINDER LINES (6K4145 N/S)--As Viewed from R.H. Side of Machine--Part 2 of 2
c137588 UEG0596S
6K4145 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0947 [2] BOLT  
2. 3B-4508 [4] LOCKWASHER  
3. 4B-4280 [1] WASHER  
4. 4J-0519 [1] SEAL  
5. 6K-7518 [1] TUBE ASSEM.  
    (Ref. No. 17 to Hydraulic Tank)
6. 1B-2790 [8] BOLT  
7. 1F-4111 [4] BOLT (3.50" long)  
  2B-2694 [4] BOLT (2" long)  
  1D-4716 [8] NUT  
8. 3B-4505 C [24] LOCKWASHER  
9. 1P-4575 C [12] FLANGE  
10. 4J-8996 C [6] SEAL  
11. 7K-1855 [4] HOSE ASSEM.  
  9S-0671 HOSE 24.60"  
    (Angle Orientation 0 Degrees)
12. 3S-8606 [2] SLEEVE  
13. 8S-7240 H GUARD 21"  
14. 8S-6458 [1] STEM ASSEM. (60 degrees)  
15. 9S-0681 [1] STEM ASSEM. (Straight)  
16. 7K-1349 [1] TUBE ASSEM. (Right Hand)  
    (Ref. No. 24 to Ref. No. 26)
17. 8K-7621 C [1] TUBE ASSEM.  
    (Ref. No. 5 to Ref. No. 14)
18. 0S-1594 [4] BOLT  
19. 3B-4506 [12] LOCKWASHER  
  4B-4278 [12] WASHER  
20. 0L-1351 [8] BOLT  
21. 9K-1542 [1] BRACKET  
22. 6K-7401 [1] "U" BOLT  
  1D-4716 [4] NUT  
  3B-4505 [4] LOCKWASHER  
  4B-4277 [4] WASHER  
23. 6K-7608 [2] BRACKET  
24. 6K-7637 [1] TUBE ASSEM.  
    (Ref. No. 16 to Hydraulic Tank)
25. 1A-1460 [2] BOLT  
26. 7K-0649 [1] HOSE ASSEM.  
  9S-0671 H HOSE 22.20"  
    (Angle Orientation 0 Degrees)
27. 3S-8606 [2] SLEEVE  
28. 8S-6457 [2] STEM ASSEM.  
29. 7K-1350 [1] TUBE ASSEM. (Left Hand)  
    (Ref. No. 26 to Ref. No. 30)
30. 6K-7607 [1] BLOCK  
31. 9K-1543 C [1] BRACKET  
32. 4B-3388 [8] BOLT  
33. 1A-9579 [8] BOLT  
34. 4J-5267 C [8] SEAL  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#UEG0596S0163
 

7J-9861: LIFT CYLINDER AND SEAL GROUP

7J9861 LIFT CYLINDER AND SEAL GROUP (Change 0)--(7K9441 N/S)--R.H.--4" Bore x 32.80" Stroke
c213611 UEG0596S
7J9861 LIFT CYLINDER AND SEAL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-3950 [1] NUT  
2. 1M-1571 [1] RING  
3. 5J-5402 [1] SEAL ASSEM.  
4. 6J-2204 [1] PISTON  
5. 7J-9857 C [1] CYLINDER ASSEM.  
6. 7J-9856 [1] SPACER  
7. 6J-6043 [2] BEARING  
8. 5P-0065 CH [4] SEAL  
9. 1H-8128 [1] SEAL  
  2K-6830 [1] RING  
10. 6J-2211 [1] HEAD  
11. 5J-3616 [1] SEAL  
12. 5J-8225 [1] SEAL  
13. 4J-3515 [1] SEAL  
14. 7J-9712 C [1] ROD ASSEM.  
    (Includes)
16. 7J-9745 [1] BEARING  
17. 1B-4367 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  C   INDICATES CHANGE
  H   NOT PART OF 7J9861 CYLINDER GR
 

#UEG0596S0164
 

7J-9862: LIFT CYLINDER GROUP

7J9862 LIFT CYLINDER GROUP--(Change 0)--(7K9442 N/S)--L.H.--4" Bore x 32.80" Stroke
c161447 UEG0596S
7J9862 LIFT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-3950 [1] NUT  
2. 1M-1571 [1] RING  
3. 5J-5402 [1] SEAL ASSEM.  
4. 6J-2204 [1] PISTON  
5. 7J-9858 C [1] CYLINDER ASSEM.  
6. 7J-9856 [1] SPACER  
7. 6J-6043 [2] BEARING  
8. 5P-0065 H [4] SEAL  
9. 1H-8128 [1] SEAL  
  2K-6830 [1] RING  
10. 6J-2211 [1] HEAD  
11. 5J-3616 [1] SEAL  
12. 5J-8225 [1] SEAL  
13. 4J-3515 [1] SEAL  
14. 7J-9712 [1] ROD ASSEM.  
    (Includes)
15. 7J-9745 C [1] BEARING  
16. 1B-4367 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  C   INDICATES CHANGE
  H   NOT PART OF 7J9862 CYLINDER GR
 

#UEG0596S0165
 

7K-9409: TILT CYLINDER AND SEAL GROUP

7K9409 TILT CYLINDER AND SEAL GROUP--R.H.--4" Bore x 21.80" Stroke
Serial No. 80H3040 to 80H3128 inclusive
c136795 UEG0596S
7K9409 TILT CYLINDER AND SEAL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7408 [1] PLUG  
2. 7J-9753 [1] CYLINDER ASSEM.  
3. 7K-9203 [2] SEAL  
  7J-9682 [1] BEARING  
4. 1H-8128 [1] SEAL  
5. 2K-6830 [1] RING  
6. 6J-6922 [1] HEAD  
7. 6J-6916 [1] SEAL  
8. 6J-3892 [1] SEAL  
9. 7J-9747 [1] ROD ASSEM.  
10. 7K-9203 [2] SEAL  
  7J-9682 [1] BEARING  
11. 5J-8238 [1] SEAL  
12. 1D-4627 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
13. 1M-1571 [1] RING  
14. 5J-5402 [1] SEAL ASSEM.  
15. 5J-8020 [1] PISTON  
16. 5J-7878 [1] NUT  
 

#UEG0596S0166
 

8J-5937: TILT CYLINDER AND SEAL GROUP

8J5937 TILT CYLINDER AND SEAL GROUP (Change 0)--(9K3832 N/S)--R.H.--4" Bore x 21.80" Stroke
Serial No. 80H3129-Up
c202266 UEG0596S
8J5937 TILT CYLINDER AND SEAL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7408 [1] PLUG  
2. 7J-9754 [1] CYLINDER ASSEM.  
    (Includes)
3. 7J-9682 [1] BEARING  
4. 1H-8128 [1] SEAL  
5. 2K-6830 [1] RING  
6. 6J-6922 [1] HEAD  
7. 6J-6916 [1] SEAL  
8. 6J-3892 [1] SEAL  
9. 7J-9747 [1] ROD ASSEM.  
    (Includes)
10. 7J-9682 [1] BEARING  
11. 5J-8238 [1] SEAL  
12. 1D-4627 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
13. 1M-1571 [1] RING  
14. 5J-5402 [1] SEAL ASSEM.  
15. 5J-8020 [1] PISTON  
16. 5J-7878 [1] NUT  
17. 5P-0093 H [4] SEAL  
  H   NOT PART OF 8J5937 CYLINDER GR
 

#UEG0596S0167
 

7J-9750: TILT CYLINDER AND SEAL GROUP

7J9750 TILT CYLINDER AND SEAL GROUP (Change 0)--(7K9410 N/S)--L.H.--4" Bore x 21.80" Stroke
c202265 UEG0596S
7J9750 TILT CYLINDER AND SEAL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7408 [1] PLUG  
2. 7J-9752 C [1] CYLINDER ASSEM.  
    (Includes)
3. 7J-9682 [1] BEARING  
4. 1H-8128 [1] SEAL  
5. 2K-6830 [1] RING  
6. 6J-6922 [1] HEAD  
7. 6J-6916 [1] SEAL  
8. 6J-3892 [1] SEAL  
9. 7J-9950 C [1] ROD ASSEM.  
    (Includes)
10. 7J-9682 [1] BEARING  
11. 5J-8238 [1] SEAL  
12. 1D-4627 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
13. 1M-1571 [1] RING  
14. 5J-5402 [1] SEAL ASSEM.  
15. 5J-8020 [1] PISTON  
16. 5J-7878 [1] NUT  
17. 5P-0093 H [4] SEAL  
  C   INDICATES CHANGE
  H   NOT PART OF 7J9750 CYLINDER GR
 

#UEG0596S0168
 

5K-9646: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (5K9646 N/S)
c129524 UEG0596S
5K9646 HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1170 [2] HANDLE  
2. 7K-7161 [1] LEVER (Lift)  
3. 1L-3046 [12] WASHER  
4. 7K-3831 [1] SPACER  
5. 6K-3973 [1] SHAFT  
  4H-3119 [1] PIN  
6. 6K-0647 [4] BEARING  
7. 6K-3975 [1] BRACKET  
8. 6H-1717 [3] BOLT  
9. 3B-4508 [3] LOCKWASHER  
10. 1A-9252 [1] ROD END  
11. 7H-7647 [1] ROD  
12. 3K-0881 [1] ROD  
13. 5B-9079 [2] NUT  
14. 2K-0400 [1] YOKE END  
15. 1J-4384 [4] PIN  
16. 3B-4615 [4] COTTER PIN  
17. 7K-7162 [1] LEVER (Tilt)  
18. 7B-3028 [4] SCREW  
19. 4M-4625 [4] PLATE (Instruction)  
 

#UEG0596S0169
 

7K-9641: CONTROL GP-BUCKET

7K9641 BUCKET CONTROL GROUP
c223555 UEG0596S
7K9641 CONTROL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-9356 [2] PIN  
2. 3B-8489 [14] FITTING  
3. 3V-7030 C [1] LEVER SERVICE GRP. (L.H. outer)  
  5K-8948 [1] LEVER (R.H. Inner)  
4. 1D-4572 [2] BOLT  
5. 1K-6872 [12] NUT  
6. 5K-2266 [2] BAR  
7. 0S-1621 [16] BOLT  
8. 3B-4508 [18] LOCKWASHER  
9. 7K-9355 [2] PIN  
10. 7K-9358 [2] PIN  
11. 5K-8278 [1] LEVER (Front L.H.)  
12. 7K-9357 [2] PIN  
13. 8K-5066 [2] LINK AND SEAL GROUP (Front)  
  4F-4879 [1] BOLT  
  4B-5167 [1] WASHER  
14. 7K-9202 [4] SEAL  
  7K-9546 [2] BEARING  
15. 6K-3937 [2] PIN  
16. 0S-1573 [4] BOLT  
17. 7K-9360 [2] PIN  
18. 7K-9222 [8] WASHER (Use as Required)  
19. 8K-5067 C [1] ARM BEARING AND SEAL GROUP  
  7K-9896 [1] ARM ASSEM. (Lift)  
20. 7K-9203 [4] SEAL  
  7K-9549 [2] BEARING  
21. 7K-9202 [4] SEAL  
22. 7K-9547 [2] BEARING  
23. 7K-9217 [4] SEAL  
  7K-9545 [2] BEARING  
24. 7K-9209 [4] SEAL  
1. 7K-9548 [2] BEARING  
25. 2K-0703 [4] WASHER BAR  
26. 2H-6488 [4] BOLT  
27. 7K-9359 [2] PIN  
28. 5K-8277 [1] LEVER (Front R.H.)  
29. 7K-9361 [2] PIN  
30. 6K-2641 [2] BAR  
31. 7K-9362 [2] PIN  
32. 2D-4867 [10] FITTING  
33. 6F-5282 [4] BOLT  
34. 7K-9351 [2] PIN  
35. 8K-5065 [2] LINK AND SEAL GROUP (Rear)  
36. 7K-9205 [4] SEAL  
  7K-9487 [2] BEARING  
37. 5K-8338 [2] PIN  
38. 1A-5405 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
39. 3V-7029 C [1] LEVER SERVICE GRP. (R.H. outer)  
  5K-8947 [1] LEVER (R.H. Inner)  
40. 7K-9350 [2] PIN  
41. 8K-8580 [2] BAR  
  0S-1588 [2] BOLT  
  3B-4506 C [2] LOCKWASHER  
  4B-4278 [2] WASHER  
  0T-0431 [2] WASHER  
42. 8S-5144 CH [1] PLATE (warning)  
  4B-4158 CH [4] SCREW  
  C   INDICATES CHANGE
  H   PART OF 3V7030 & 3V7029 LEVER
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Relief Valve (Rod End Of Tilt Cylinder)<BR> (5J9106)
941B & 951C TRACK-TYPE LOADER HYDRAULIC SYSTEM
Relief Valve (Head End Of Tilt Cylinder)<BR> (5J9107)
941B & 951C TRACK-TYPE LOADER HYDRAULIC SYSTEM
Cylinders
941B & 951C TRACK-TYPE LOADER HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Tilt Lines Hose Prevents Failure{5057,5104}
1983/09/12
Use New Drift Rate Chart When Testing And Troubleshooting Cylinder Drift In Hydraulic Circuits{5050,5100}
1979/04/02
Stronger Tube Assembly Used In Tilt Cylinder Lines Group{5057}
1979/06/11
Service Brace Is Used With New Lift Arm{0643,5102,6119}
1979/08/20
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 941 :

LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
8K-8532 HYDRAULIC LINES
HYDRAULIC LINES
8K-8532 HYDRAULIC LINES
CARTRIDGE GP
3G-2195 CARTRIDGE GP
HYDRAULIC PUMP ASSEMBLY
7J-0583 HYDRAULIC PUMP ASSEMBLY
HYDRAULIC PUMP ASSEMBLY
7J-0583 HYDRAULIC PUMP ASSEMBLY
LINES GP-TILT CYLINDER
6K-4145 LINES GP-TILT CYLINDER
6K-4145 LINES GP-TILT CYLINDER
LIFT CYLINDER AND SEAL GROUP
7J-9861 LIFT CYLINDER AND SEAL GROUP
LIFT CYLINDER GROUP
7J-9862 LIFT CYLINDER GROUP
TILT CYLINDER AND SEAL GROUP
7K-9409 TILT CYLINDER AND SEAL GROUP
TILT CYLINDER AND SEAL GROUP
8J-5937 TILT CYLINDER AND SEAL GROUP
TILT CYLINDER AND SEAL GROUP
7J-9750 TILT CYLINDER AND SEAL GROUP
HYDRAULIC HAND CONTROL
5K-9646 HYDRAULIC HAND CONTROL

Truck sale:

Caterpillar 941, Construction
3,000 
Caterpillar 941, Construction
- track loaders
MICHIGAN CAT
7038 - CAT 941
 
7038 - CAT 941

avspare
1974 CAT 941
USD $13,750 
1974 CAT 941

WESTERN MICHIGAN EQUIPMENT
Traverse City, Michigan
1980 CAT 941
Call 
1980 CAT 941

DDG Equipment
1974 CAT 941
USD $5,500 
1974 CAT 941

RP Equipment
Allentown, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.