AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (9S9046 N/S)--Side View--Part 1 of 2 Serial No. 50S1 to 50S353, 364, 373, 386, 388 to 392, 394 and 50S397 inclusive 5S6407 Cylinder Block parts are shown on Page 26. Note: 9S8914 Piston & Liner Group consisting of: 1--Piston Assembly, 1--Liner and 2--Seal is available. See Page 29 for Gasket Kit 518


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
PULLEY GP
CRANKSHAFT GP

WHEEL SKIDDER 518 WHEEL SKIDDER 50S
 518 SKIDDER 50S00001-00596 (MACHINE) UEG0597S 518 50S   (1971)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
9S-9046 CYLINDER BLOCK AND COVERS
9S-9046 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-9046 CYLINDER BLOCK AND COVERS
9S-9046 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
5S-6407 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
2P-8774 CYLINDER BLOCK AS
 

#UEG0597S0020
 

9S-9046: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S9046 N/S)--Side View--Part 1 of 2
Serial No. 50S1 to 50S353, 364, 373, 386, 388 to 392, 394 and 50S397 inclusive
5S6407 Cylinder Block parts are shown on Page 26. Note: 9S8914 Piston & Liner Group consisting of:
1--Piston Assembly, 1--Liner and 2--Seal is available. See Page 29 for Gasket Kit
c112112 UEG0597S
9S9046 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-6557 [4] LINER  
2. 5S-6670 [8] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [20] BOLT  
5. 3B-4506 [61] LOCKWASHER  
6. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
7. 1P-9308 [1] HOUSING (Flywheel)  
8. 5S-6407 Y [1] BLOCK ASSEM.  
    (See Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
10. 5S-7134 [1] GASKET  
11. 0S-1594 [8] BOLT  
12. 5M-6213 [4] PLUG  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1591 [12] BOLT (1.50" Long)  
16. 8M-3023 [4] ORIFICE  
17. 9H-5921 [1] GASKET  
18. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
19. 9H-6067 [1] SEAL  
20. 8S-0499 [1] TUBE ASSEM.  
21. 8S-1963 [1] GASKET  
22. 2A-4639 [5] BOLT (1.625" Long)  
23. 5S-6045 [1] GASKET  
24. 8S-1959 [1] PLATE ASSEM.  
25. 1A-5964 [5] BOLT (4.50" Long)  
  0L-1352 [2] BOLT (3.25" Long)  
  Y   SEPARATE ILLUSTRATION
 

#UEG0597S0021
 

9S-9046: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S9046 N/S)--End View--Part 2 of 2
Serial No. 50S1 to 50S353, 364, 373, 386, 388 to 392, 394 and 50S397 inclusive
c112113 UEG0597S
9S9046 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [8] BOLT  
2. [1] LOCK  
3. [1] LOCK  
4. [1] COVER  
5. [1] GASKET  
6. [6] NUT  
7. [8] LOCKWASHER  
8. [1] COVER ASSEM.  
9. [1] STUD  
10. [2] DOWEL  
11. [4] STUD  
12. [2] BOLT  
13. [1] LOCK  
14. [1] PLUG  
15. [13] BOLT  
16. [1] LOCK  
17. [1] LOCK  
18. [2] LOCK  
19. [2] LOCKWASHER  
20. [1] LOCK  
21. [1] PAN  
 

#UEG0597S0022
 

9S-9046: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S9046 N/S)--Side View--Part 1 of 2
Serial No. 50S354 to 50S363, 365 to 372, 374 to 385, 387, 393, 395, 396 and 50S398-Up and 55U1-Up
2P8774 Cylinder Block parts are shown on Page 26A. See Page 29 for Gasket Kit
c114499 UEG0597S
9S9046 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8889 C [4] LINER  
2. 5S-6670 C [12] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [20] BOLT  
5. 3B-4506 C [36] LOCKWASHER  
6. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
7. 1P-9308 [1] HOUSING (Flywheel)  
8. 2P-8774 RYC [1] BLOCK ASSEM.  
    (See Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
10. 5S-7134 [1] GASKET  
11. 0S-1594 [8] BOLT  
12. 5M-6213 [4] PLUG  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1591 [12] BOLT (1.50" Long)  
16. 8M-3023 [4] ORIFICE  
17. 9H-5921 [1] GASKET  
18. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
19. 9H-6067 [1] SEAL  
20. 8S-0499 [1] TUBE ASSEM.  
21. 8S-1963 [1] GASKET  
22. 2A-4639 [5] BOLT (1.625" long)  
23. 5S-6045 [1] GASKET  
24. 8S-1959 [1] PLATE ASSEM.  
25. 1A-5964 [5] BOLT (4.50" long)  
  0L-1352 [2] BOLT (3.25" long)  
26. 5M-6214 C [1] PLUG  
27. 5M-2894 C [24] WASHER  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0597S0023
 

9S-9046: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (9S9046 N/S)--End View - Part 2 of 2
Serial No. 50S354 to 50S363, 365 to 372, 374 to 385, 387, 393, 395, 396
and 50S398-Up and 55U1-Up
c114500 UEG0597S
9S9046 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [8] BOLT  
2. [1] LOCK  
3. [1] LOCK  
4. [1] COVER  
5. [1] GASKET  
6. [6] NUT  
7. [8] LOCKWASHER  
8. [1] COVER ASSEM.  
9. [1] STUD  
10. [2] DOWEL  
11. [4] STUD  
12. [2] BOLT  
13. [1] LOCK  
14. [1] PLUG  
15. [13] BOLT  
16. [1] LOCK  
17. [1] LOCK  
18. [2] LOCK  
19. [2] LOCKWASHER  
20. [1] LOCK  
21. C [1] PAN  
  C   INDICATES CHANGE
 

#UEG0597S0024
 

5S-6407: CYLINDER BLOCK ASSEMBLY

5S6407 CYLINDER BLOCK ASSEMBLY
Serial No. 50S1 to 50S353, 364, 373, 386, 388 to 392, 394 and 50S397 inclusive
Part of Cylinder Block and Covers shown on Page 24
Note: For field replacement order 5S6407 plus 1-9S5602 Hardware Kit
c130130 UEG0597S
5S6407 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1H-0974 [1] DOWEL  
10. 8S-4676 [5] CAP GROUP  
  8S-4674 [10] SHIM (Long)  
    (2 in each 8S4676 Group)
  8S-4673 [30] SHIM (Short)  
    (6 in each 8S4676 Group)
    -or-
  1P-2717 [5] BEARING CAP  
11. 7S-3224 [10] BOLT  
12. 2S-5658 [10] WASHER  
13. 8S-0835 [1] DOWEL  
14. 5S-6420 [2] BEARING  
15. 4B-9782 [5] BALL  
16. 5S-6419 [4] BEARING  
17. 2A-3798 [2] DOWEL  
18. 7M-4046 [2] BEARING  
 

#UEG0597S0025
 

2P-8774: CYLINDER BLOCK AS

2P8774 CYLINDER BLOCK ASSEMBLY
Serial No. 50S354 to 50S363, 365 to 372, 374 to 385, 387, 393, 395, 396 and 50S398-Up and 55U1-Up
Part of Cylinder Block and Covers shown on Page 24B
Note: For field replacement order 2P8774 plus 1-2P8783 Hardware Kit
c117455 UEG0597S
2P8774 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLUG  
2. [2] DOWEL  
3. [2] DOWEL  
4. [3] PLUG  
5. [2] PLUG  
6. [2] DOWEL  
7. [1] STUD  
8. [1] BEARING  
9. [1] DOWEL  
10. [5] BEARING CAP  
11. [10] BOLT  
12. [10] WASHER  
13. [1] DOWEL  
14. [2] BEARING  
15. [5] BALL  
16. [4] BEARING  
17. [2] DOWEL  
18. [2] BEARING  
 

#UEG0597S0026
 

1P-3465: CRANKSHAFT

CRANKSHAFT (1P3465 N/S)
c112114 UEG0597S
1P3465 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-9022 [1] SEAL  
    -OR-
  5S-6297 [1] SEAL ASSEM.  
    (With Sleeve for Worn Flange)
2. 2P-0716 [2] PLATE  
3. 5S-5252 [1] CRANKSHAFT ASSEM.  
4. 9F-2247 [4] PLUG  
5. 4M-9933 [1] GEAR (40 Teeth)  
  5H-2671 [1] KEY  
6. 5S-9021 [1] SEAL  
7. 3S-9730 [5] BEARING  
 

#UEG0597S0027
 

CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
UEG0597S0027 UEG0597S
None CRANKSHAFT BEARING REPLACEMENT GROUPS Parts scheme
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UEG0597S0028
 

1P-6900: AUXILIARY DRIVE PULLEY

AUXILIARY DRIVE PULLEY (1P6900 N/S)
c112536 UEG0597S
1P6900 AUXILIARY DRIVE PULLEY Parts scheme
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PULLEY  
2. [1] BOLT  
3. [1] WASHER  
 

#UEG0597S0029
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
UEG0597S0029 UEG0597S
  For full view, you need register

Parts for your 518 WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-3822 [5] BEARING MAIN  
    (.020 OVERSIZE AND .010 UNDERSIZE)
  6N-3823 [5] BEARING MAIN  
    (.020 OVERSIZE)
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3304 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Camshaft Bearings
3304 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Cylinder Liner
3304 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Cylinder Liner Projection
3304 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Bearing Surface (Journal) For Main Bearings
3304 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Connecting Rod And Main Bearings
3304 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Cylinder Block
3304 VEHICULAR ENGINE
Cylinder Liner
3304 VEHICULAR ENGINE
Cylinder Liner Projection
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Crankshaft Main Bearings
3304 VEHICULAR ENGINE FOR 518 SKIDDERS
Cylinder Head (With Spacer Plate)
3304 VEHICULAR ENGINE FOR 518 SKIDDERS
Cylinder Head (Without Spacer Plate)
3304 VEHICULAR ENGINE FOR 518 SKIDDERS
Spacer Plate
3304 VEHICULAR ENGINE FOR 518 SKIDDERS
Cylinder Liners
3304 VEHICULAR ENGINE FOR 518 SKIDDERS
Piston Cooling Orifices
3304 VEHICULAR ENGINE FOR 518 SKIDDERS
Camshaft Bearings
3304 VEHICULAR ENGINE FOR 518 SKIDDERS
Cylinder Liner - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Spacer Plate - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Liner - Install
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18

Caterpillar Parts SIS Catalog 518 :

5S-8529 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-8529 CYLINDER HEAD AND VALVE MECHANISM
GLOW PLUG GP
5S-8500 GLOW PLUG GP
LIFTING GP
1P-3840 LIFTING GP
MANIFOLD
1P-6473 MANIFOLD
MUFFLER GP
1P-6427 MUFFLER GP
FUMES DISPOSAL
1P-6806 FUMES DISPOSAL
TURBOCHARGER GROUP
1P-0035 TURBOCHARGER GROUP
9S-9046 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
9S-9046 CYLINDER BLOCK AND COVERS
9S-9046 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
5S-6407 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
2P-8774 CYLINDER BLOCK AS
CRANKSHAFT
1P-3465 CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
AUXILIARY DRIVE PULLEY
1P-6900 AUXILIARY DRIVE PULLEY

Truck sale:

 
 
Caterpillar 518, Forestry Equipment
- skidder
CARTER MACHINERY COMPANY, INC.
 
 
Caterpillar 518, Forestry Equipment
- skidder
CARTER MACHINERY COMPANY, INC.
Caterpillar 518, Forestry Equipment
4,951 
Caterpillar 518, Forestry Equipment
- skidder
FINNING CANADA
Canada
Caterpillar 518, Forestry Equipment
24,500 
Caterpillar 518, Forestry Equipment
- skidder
MILTON CAT
Caterpillar 518SA, Forestry Equipment
24,000 
Caterpillar 518SA, Forestry Equipment
- skidder
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.