AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3160 ENGINE 98M00001-UP FUEL SYSTEM Caterpillar SIS



INDUSTRIAL ENGINE 3160 INDUSTRIAL ENGINE 98M
 3160 ENGINE 98M00001-UP UEG0619S 3160 98M   (1969)

Parts group 3160:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-GOVERNOR
GOVERNOR CONTROL GROUP
4N-3868 GOVERNOR CONTROL GROUP
4N3868 GOVERNOR CONTROL GROUP
Serial No. 98M4326-Up
Only separate parts serviced
GOVERNOR CONTROL GROUP
2N-1317 GOVERNOR CONTROL GROUP
2N1317 GOVERNOR CONTROL GROUP
GOVERNOR CONTROL GROUP
2N-2111 GOVERNOR CONTROL GROUP
2N2111 GOVERNOR CONTROL GROUP
FOR USE WITH DIESEL ELECTRIC SETS
Only separate parts serviced
DROOP COMPENSATION GROUP
2N-2398 DROOP COMPENSATION GROUP
2N2398 DROOP COMPENSATION GROUP
FOR USE WITH 2N2220 GENERATOR GROUP
DRIVE GP-TACHOMETER
TACHOMETER MOUNTING & DRIVE GP
2N-5745 TACHOMETER MOUNTING & DRIVE GP
2N5745 TACHOMETER DRIVE AND MOUNTING GROUP
FILTER GP-FUEL
FUEL FILTER LINES GROUP
9L-6121 FUEL FILTER LINES GROUP
9L6121 FUEL FILTER LINES GROUP
Serial No. 98M4326-Up
Only separate parts serviced
FUEL FILTER GROUP
9L-8822 FUEL FILTER GROUP
9L8822 FUEL FILTER GROUP
Serial No. 98M1 to 98M369 inclusive
FUEL FILTER GROUP
9L-8822 FUEL FILTER GROUP
9L8822 FUEL FILTER GROUP
Effective with Serial No. 98M370
FUEL FILTER GROUP
3N-1290 FUEL FILTER GROUP
3N1290 FUEL FILTER GROUP
Serial No. 98M1515-Up
Only separate parts serviced
FUEL FILTER GROUP
4N-5464 FUEL FILTER GROUP
4N5464 FUEL FILTER GROUP
Serial No. 98M4326 to 98M5876 inclusive
Only separate parts serviced
FUEL FILTER GROUP
4N-5464 FUEL FILTER GROUP
4N5464 FUEL FILTER GROUP
Serial No. 98M5877-Up
Only separate parts serviced
FUEL FILTER GROUP
9L-9927 FUEL FILTER GROUP
9L9927 FUEL FILTER GROUP
Serial No. 98M980-Up
Only separate parts serviced
COVER GP-FUEL FILTER BASE
4N-7935 COVER GP-FUEL FILTER BASE
4N7935 FUEL FILTER BASE COVER GROUP
Serial No. 98M4568-Up
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
8H4681 PRIMARY FUEL FILTER GROUP
Also part of 3N3328 and 4N6758 Engine Arrangements and 2N3435 Fuel
Tank Group shown on Pages 7, 8B and 104
GOVERNOR GP
FUEL PUMP HOUSING AND GOVERNOR
8L-6382 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (8L6382 N/S)
Serial No. 98M1 to 98M449 inclusive. Part of 8L6380 Fuel System shown on Pages
43 and 45. Rack Stop, 8L9828 Governor and 9L9925 Fuel Pump
Housing parts are shown on Pages 39, 54 through 57B and 62 through 64A
FUEL PUMP HOUSING AND GOVERNOR
8L-6382 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (8L6382 N/S)
Serial No. 98M450 to 98M4197 inclusive. Part of 8L6380 and 3N1282 Fuel Systems
shown on Pages 45, 46A, 46C, 53B and 53D. 2S9519 Rack Stop, 8L9828 Governor
and 9L9925 Fuel Pump Housing parts are shown on Pages
39, 40, 54 through 57B and 62 through 64A
FUEL PUMP HOUSING AND GOVERNOR
3N-3327 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (3N3327 N/S)
Serial No. 98M1893 to 98M4197 inclusive. Part of 3N3325 Fuel System
shown on Pages 52A and 52C. 2S9519 Rack Stop, 8L9828 Governor and 9L9925 Fuel Pump
Housing parts are shown on Pages 40, 54 through 57B and 62 through 64A
FUEL PUMP HOUSING AND GOVERNOR
2N-2081 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (2N2081 N/S)
Serial No. 98M2321 to 98M3813 inclusive. Part of 2N8511 Fuel System shown on
Page 49. 2S9519 Rack Stop, 2N2083 Governor and 2N2082 Fuel Pump Housing
parts are shown on Pages 40, 58 through 59B, 65 and 66
FUEL PUMP HOUSING AND GOVERNOR
1N-9870 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (1N9870 N/S)
Serial No. 98M2257 to 98M4197 inclusive. Part of 2N8505 Fuel System shown on
Pages 50A and 50C. 1N9889 Torque Spring, 8L9828 Governor and 9L9925 Fuel
Pump Housing parts are shown on Pages 40, 41, 54 through 57B and 62 through 64A
FUEL PUMP HOUSING AND GOVERNOR
2N-2081 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (2N2081 N/S)
Serial No. 98M3814-Up. Part of 2N8511 Fuel System shown on Pages 49A
through 49D. 2S9519 Rack Stop, 2N2083 Governor and 4N7760 Pump Housing
parts are shown on Pages 40, 58 through 59B, 65, 66 and 66A
FUEL PUMP HOUSING AND GOVERNOR
8L-6382 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (8L6382 N/S)
Serial No. 98M4198-Up. Part of 8L6380 and 3N1282 Fuel Systems shown on
Pages 47 and 53F. 2S9519 Rack Stop, 8L9828 Governor and 4N7761 Fuel Pump
Housing parts are shown on Pages 40, 54 through 57B and 64B
FUEL PUMP HOUSING AND GOVERNOR
3N-3327 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (3N3327 N/S)
Serial No. 98M4198 to 98M7708 inclusive. Part of 3N3325 Fuel System shown on
Page 52D. 2S9519 Rack Stop, 8L9828 Governor and 4N7761 Fuel Pump Housing
parts are shown on Pages 40, 54 through 57B and 64B
FUEL PUMP HOUSING AND GOVERNOR
1N-9870 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (1N9870 N/S)
Serial No. 98M4198-Up. Part of 2N8505 Fuel System shown on Page 51
1N9889 Torque Spring, 8L9828 Governor and 4N7761 Fuel Pump Housing parts
are shown on Pages 40, 41, 54 through 57B and 64B
FUEL PUMP HOUSING AND GOVERNOR
3N-3327 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (3N3327 N/S)
Serial No. 98M7709-Up. Part of 3N3325 Fuel System shown on Page 52D
2S9519 Rack Stop, 6N1622 Governor and 4N7761 Fuel Pump Housing parts are
shown on Pages 40, 59B-1, 59B-2 and 64B
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-6583 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N6583 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 98M4326-Up. 4N8815 Control and 4N2128 Pump parts are shown
on Pages 38C-2 and 38H. Note: For Field Replacement order 1--9N681 Pump,
1--4N9314 Shut-Off, 1--4N8815 Control and 1--4N9226 Spring
GOV & FUEL INJ PUMP GP
9N-0681 GOV & FUEL INJ PUMP GP
9N681 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 98M4326-Up
Provides Field Replacement for 4N6583 Governor and Fuel Injection Pump Group shown on Page 38C
Control and Pump parts are shown on Pages 38C-2 through 38C-6
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
6N1085 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Serial No. 98M4326-Up
Part of 9N681 Governor and Fuel Injection Pump Group shown on Page 38C-1
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
6N1085 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Serial No. 98M4326-Up
Part of 9N681 Governor and Fuel Injection Pump Group shown on Page 38C-1
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP (6N1085 N/S)--Part 3 of 4
Serial No. 98M4326-Up
Part of 9N681 Governor and Fuel Injection Pump Group shown on Page 38C-1
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP (6N1085 N/S)--Part 4 of 4
Serial No. 98M4326-Up
Part of 9N681 Governor and Fuel Injection Pump Group shown on Page 38C-1
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1838 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N1838 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Serial No. 98M4326-Up
Part of 4N2128 Governor and Fuel Injection Pump Group shown on Page 38H
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1838 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N1838 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Serial No. 98M4326-Up
Part of 4N2128 Governor and Fuel Injection Pump Group shown on Page 38H. Only separate parts serviced
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1838 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N1838 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Serial No. 98M4326-Up
Part of 4N2128 Governor and Fuel Injection Pump Group shown on Page 38H. Only separate parts serviced
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1838 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N1838 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Serial No. 98M4326-Up
Part of 4N2128 Governor and Fuel Injection Pump Group shown on Page 38H. Only separate parts serviced
GOV & FUEL INJ PUMP GP
4N-2128 GOV & FUEL INJ PUMP GP
4N2128 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 98M4326-Up
Part of 4N6583 Governor and Fuel Injection Pump Group shown on Page 38C. 4N1838 Pump and 4N9314 Shut-Off
parts are shown on Pages 38D through 38G and 38J. Only separate parts serviced
GOVERNOR CYLINDER GROUP
9L-7799 GOVERNOR CYLINDER GROUP
9L7799 GOVERNOR CYLINDER GROUP
Part of 8L9828 and 2N2083 Governor Groups shown on Pages 57A & 59A
GOVERNOR GROUP
8L-9828 GOVERNOR GROUP
8L9828 GOVERNOR GROUP--Part 1 of 2--Type 1
Part of Fuel Pump Housing and Governor shown on Pages 36, 37 and 38
GOVERNOR GROUP
8L-9828 GOVERNOR GROUP
8L9828 GOVERNOR GROUP--Part 2 of 2--Type 1
Part of Fuel Pump Housing and Governor shown on Pages 36, 37 and 38
GOVERNOR GROUP
8L-9828 GOVERNOR GROUP
8L9828 GOVERNOR GROUP--Part 1 of 2--Type 2
Part of Fuel Pump Housing and Governor shown on Pages 36, 37 and 38
GOVERNOR GROUP
8L-9828 GOVERNOR GROUP
8L9828 GOVERNOR GROUP--Part 2 of 2--Type 2
Part of Fuel Pump Housing and Governor shown on Pages 36, 37 and 38
GOVERNOR GROUP
8L-9828 GOVERNOR GROUP
8L9828 GOVERNOR GROUP--Part 1 of 2--Type 3
Part of Fuel Pump Housing and Governor shown on Pages 36, 37, 38, 38A & 38B
9L7799 Cylinder parts are shown on Page 53
GOVERNOR GROUP
8L-9828 GOVERNOR GROUP
8L9828 GOVERNOR GROUP--Part 2 of 2--Type 3
Part of Fuel Pump Housing and Governor shown on Pages 36, 37, 38, 38A & 38B
GOVERNOR GROUP
2N-2083 GOVERNOR GROUP
2N2083 GOVERNOR GROUP--Part 1 of 2--Type 1
Part of Fuel Pump Housing and Governor shown on Page 38
GOVERNOR GROUP
2N-2083 GOVERNOR GROUP
2N2083 GOVERNOR GROUP--Part 2 of 2 - Type 1
Part of Fuel Pump Housing and Governor shown on Page 38
GOVERNOR GROUP
2N-2083 GOVERNOR GROUP
2N2083 GOVERNOR GROUP--Part 1 of 2--Type 2
Part of Fuel Pump Housing and Governor shown on Page 38
9L7799 Cylinder parts are shown on Page 53
GOVERNOR GROUP
2N-2083 GOVERNOR GROUP
2N2083 GOVERNOR GROUP--Part 2 of 2--Type 2
Part of Fuel Pump Housing and Governor shown on Page 38
GOVERNOR GROUP
6N-1622 GOVERNOR GROUP
6N1622 GOVERNOR GROUP--Part 1 of 2
Serial No. 98M7709-Up
Part of Fuel Pump Housing and Governor shown on Page 38B. 9L7799 Cylinder parts are shown on Page 53
GOVERNOR GROUP
6N-1622 GOVERNOR GROUP
6N1622 GOVERNOR GROUP--Part 2 of 2
Serial No. 98M7709-Up
Part of Fuel Pump Housing and Governor shown on Page 38B
CONVERSION GP-GOVERNOR
4N-7959 CONVERSION GP-GOVERNOR
4N7959 DASHPOT GOVERNOR CONVERSION GROUP--Field Installation-Type 1
Serial No. 98M4326-Up. Note: Allows Field
Changeover from Standard to Dashpot Type Governor
CONVERSION GP-GOVERNOR
4N-7959 CONVERSION GP-GOVERNOR
4N7959 DASHPOT GOVERNOR CONVERSION GROUP--Type 2
Serial No. 98M4326-Up
Note: Allows Field Changeover from Standard to Dashpot Type Governor
CONVERSION GP-GOVERNOR
4N-7959 CONVERSION GP-GOVERNOR
4N7959 DASHPOT GOVERNOR CONVERSION GROUP--Type 3
Serial No. 98M4326-Up
Note: Allows Field Changeover from Standard to Dashpot Type Governor
DROOP COMPENSATION GROUP
2N-2398 DROOP COMPENSATION GROUP
2N2398 DROOP COMPENSATION GROUP
FOR USE WITH 2N2220 GENERATOR GROUP
LINES GP-FUEL
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M1 to 98M339 inclusive
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M1 to 98M339 inclusive. Fuel Pump Housing and Governor and 9L9631
Timing parts are shown on Pages 36 and 41. Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M340 to 98M511 inclusive
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M340 to 98M511 inclusive
Fuel Pump Housing and Governor and 9L9631 Timing parts
are shown on Pages 36, 37 and 41. Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M512 to 98M3829 inclusive
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M512 to 98M3829 inclusive. Fuel Pump Housing and
Governor parts are shown on Page 37. Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3830 to 98M4197 inclusive
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3830 to 98M4197 inclusive
Fuel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M4198-Up
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M4198-Up
Fuel Pump Housing and Governor parts are shown on Page 38A
Only separate parts serviced
FUEL SYSTEM
4N-5317 FUEL SYSTEM
4N5317 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3236 to 98M3306 inclusive. Fuel Pump Housing and Governor
parts are shown on Page 38A. Only separate parts serviced
FUEL SYSTEM
4N-5317 FUEL SYSTEM
4N5317 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3236 to 98M3306 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 1 of 2
Serial No. 98M2321 to 98M3813 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 2 of 2
Serial No. 98M2321 to 98M3813 inclusive. Fuel Pump Housing and Governor
parts are shown on Pages 38 and 38-1. Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3814 to 98M3829 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3814 to 98M3829 inclusive. Fuel Pump Housing and Governor
parts are shown on Pages 38 and 38-1. Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3830-Up
Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3830-Up. Fuel Pump Housing and Governor parts are shown
on Pages 38 and 38-1. Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM-Part 1 of 2
Serial No. 98M2257 to 98M3829 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 2 of 2
Serial No. 98M2257 to 98M3829 inclusive
Fuel Pump and Governor parts are shown on Page 38
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3830 to 98M4197 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3830 to 98M4197 inclusive
Fuel Pump Housing and Governor parts are shown on Page 38
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 1 of 2
Serial No. 98M4198-Up
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 2 of 2
Serial No. 98M4198-Up
Fuel Pump Housing and Governor parts are shown on Page 38B
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 1 of 2
Serial No. 98M1893 to 98M3486 inclusive
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 2 of 2
Serial No. 98M1893 to 98M3486 inclusive
Fuel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3487 to 98M4197 inclusive
Fuel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3487 to 98M4197 inclusive
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 1 of 2
Serial No. 98M4198-Up
Fuel Pump Housing and Governor parts are shown on Page 38A
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 2 of 2
Serial No. 98M4198-Up
Only separate parts serviced
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
4N5873 FUEL INJECTION LINES GROUP--Part 1 of 2
Serial No. 98M4326 to 98M7981 inclusive
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
4N5873 FUEL INJECTION LINES GROUP--Part 2 of 2
Serial No. 98M4326 to 98M7981 inclusive
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
4N5873 FUEL INJECTION LINES GROUP--Part 1 of 2
Serial No. 98M7982-Up
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
4N5873 FUEL INJECTION LINES GROUP--Part 2 of 2
Serial No. 98M7982-Up
FUEL FILTER LINES GROUP
9L-6121 FUEL FILTER LINES GROUP
9L6121 FUEL FILTER LINES GROUP
Serial No. 98M4326-Up
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 1 of 2
Serial No. 98M1515 to 98M3829 inclusive
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 2 of 2
Serial No. 98M1515 to 98M3829 inclusive
FUel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3830 to 98M4197 inclusive
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3830 to 98M4197 inclusive
Fuel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 1 of 2
Serial No. 98M4198-Up
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 2 of 2
Serial No. 98M4198-Up
Fuel Pump Housing and Governor parts are shown on Page 38A
Only separate parts serviced
FUEL PRIMING PUMP AND LINES GROUP
2N-1057 FUEL PRIMING PUMP AND LINES GROUP
2N1057 FUEL PRIMING PUMP AND LINES GROUP
9H2256 Pump parts are shown on Page 104A
PUMP GP-FUEL INJECTION
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-6583 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N6583 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 98M4326-Up. 4N8815 Control and 4N2128 Pump parts are shown
on Pages 38C-2 and 38H. Note: For Field Replacement order 1--9N681 Pump,
1--4N9314 Shut-Off, 1--4N8815 Control and 1--4N9226 Spring
GOV & FUEL INJ PUMP GP
9N-0681 GOV & FUEL INJ PUMP GP
9N681 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 98M4326-Up
Provides Field Replacement for 4N6583 Governor and Fuel Injection Pump Group shown on Page 38C
Control and Pump parts are shown on Pages 38C-2 through 38C-6
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
6N1085 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Serial No. 98M4326-Up
Part of 9N681 Governor and Fuel Injection Pump Group shown on Page 38C-1
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
6N1085 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Serial No. 98M4326-Up
Part of 9N681 Governor and Fuel Injection Pump Group shown on Page 38C-1
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP (6N1085 N/S)--Part 3 of 4
Serial No. 98M4326-Up
Part of 9N681 Governor and Fuel Injection Pump Group shown on Page 38C-1
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP (6N1085 N/S)--Part 4 of 4
Serial No. 98M4326-Up
Part of 9N681 Governor and Fuel Injection Pump Group shown on Page 38C-1
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1838 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N1838 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Serial No. 98M4326-Up
Part of 4N2128 Governor and Fuel Injection Pump Group shown on Page 38H
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1838 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N1838 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Serial No. 98M4326-Up
Part of 4N2128 Governor and Fuel Injection Pump Group shown on Page 38H. Only separate parts serviced
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1838 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N1838 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Serial No. 98M4326-Up
Part of 4N2128 Governor and Fuel Injection Pump Group shown on Page 38H. Only separate parts serviced
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1838 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N1838 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Serial No. 98M4326-Up
Part of 4N2128 Governor and Fuel Injection Pump Group shown on Page 38H. Only separate parts serviced
GOV & FUEL INJ PUMP GP
4N-2128 GOV & FUEL INJ PUMP GP
4N2128 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 98M4326-Up
Part of 4N6583 Governor and Fuel Injection Pump Group shown on Page 38C. 4N1838 Pump and 4N9314 Shut-Off
parts are shown on Pages 38D through 38G and 38J. Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M340 to 98M511 inclusive
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M340 to 98M511 inclusive
Fuel Pump Housing and Governor and 9L9631 Timing parts
are shown on Pages 36, 37 and 41. Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M512 to 98M3829 inclusive
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M512 to 98M3829 inclusive. Fuel Pump Housing and
Governor parts are shown on Page 37. Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3830 to 98M4197 inclusive
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3830 to 98M4197 inclusive
Fuel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M4198-Up
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M4198-Up
Fuel Pump Housing and Governor parts are shown on Page 38A
Only separate parts serviced
FUEL SYSTEM
4N-5317 FUEL SYSTEM
4N5317 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3236 to 98M3306 inclusive. Fuel Pump Housing and Governor
parts are shown on Page 38A. Only separate parts serviced
FUEL SYSTEM
4N-5317 FUEL SYSTEM
4N5317 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3236 to 98M3306 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 1 of 2
Serial No. 98M2321 to 98M3813 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 2 of 2
Serial No. 98M2321 to 98M3813 inclusive. Fuel Pump Housing and Governor
parts are shown on Pages 38 and 38-1. Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3814 to 98M3829 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3814 to 98M3829 inclusive. Fuel Pump Housing and Governor
parts are shown on Pages 38 and 38-1. Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3830-Up
Only separate parts serviced
FUEL SYSTEM
2N-8511 FUEL SYSTEM
2N8511 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3830-Up. Fuel Pump Housing and Governor parts are shown
on Pages 38 and 38-1. Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM-Part 1 of 2
Serial No. 98M2257 to 98M3829 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 2 of 2
Serial No. 98M2257 to 98M3829 inclusive
Fuel Pump and Governor parts are shown on Page 38
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3830 to 98M4197 inclusive
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3830 to 98M4197 inclusive
Fuel Pump Housing and Governor parts are shown on Page 38
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 1 of 2
Serial No. 98M4198-Up
Only separate parts serviced
FUEL SYSTEM
2N-8505 FUEL SYSTEM
2N8505 FUEL SYSTEM--Part 2 of 2
Serial No. 98M4198-Up
Fuel Pump Housing and Governor parts are shown on Page 38B
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 1 of 2
Serial No. 98M1893 to 98M3486 inclusive
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 2 of 2
Serial No. 98M1893 to 98M3486 inclusive
Fuel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3487 to 98M4197 inclusive
Fuel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3487 to 98M4197 inclusive
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 1 of 2
Serial No. 98M4198-Up
Fuel Pump Housing and Governor parts are shown on Page 38A
Only separate parts serviced
FUEL SYSTEM
3N-3325 FUEL SYSTEM
3N3325 FUEL SYSTEM--Part 2 of 2
Serial No. 98M4198-Up
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 1 of 2
Serial No. 98M1515 to 98M3829 inclusive
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 2 of 2
Serial No. 98M1515 to 98M3829 inclusive
FUel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 1 of 2
Serial No. 98M3830 to 98M4197 inclusive
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 2 of 2
Serial No. 98M3830 to 98M4197 inclusive
Fuel Pump Housing and Governor parts are shown on Page 37
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 1 of 2
Serial No. 98M4198-Up
Only separate parts serviced
FUEL SYSTEM
3N-1282 FUEL SYSTEM
3N1282 FUEL SYSTEM--Part 2 of 2
Serial No. 98M4198-Up
Fuel Pump Housing and Governor parts are shown on Page 38A
Only separate parts serviced
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
4N3287 FUEL PRIMING PUMP GROUP
Serial No. 98M4326 to 98M4567 inclusive
FUEL PRIMING PUMP AND LINES GROUP
2N-1057 FUEL PRIMING PUMP AND LINES GROUP
2N1057 FUEL PRIMING PUMP AND LINES GROUP
9H2256 Pump parts are shown on Page 104A
PUMP GP-FUEL TRANSFER
FUEL PUMP HOUSING AND GOVERNOR
8L-6382 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (8L6382 N/S)
Serial No. 98M1 to 98M449 inclusive. Part of 8L6380 Fuel System shown on Pages
43 and 45. Rack Stop, 8L9828 Governor and 9L9925 Fuel Pump
Housing parts are shown on Pages 39, 54 through 57B and 62 through 64A
FUEL PUMP HOUSING AND GOVERNOR
8L-6382 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (8L6382 N/S)
Serial No. 98M450 to 98M4197 inclusive. Part of 8L6380 and 3N1282 Fuel Systems
shown on Pages 45, 46A, 46C, 53B and 53D. 2S9519 Rack Stop, 8L9828 Governor
and 9L9925 Fuel Pump Housing parts are shown on Pages
39, 40, 54 through 57B and 62 through 64A
FUEL PUMP HOUSING AND GOVERNOR
3N-3327 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (3N3327 N/S)
Serial No. 98M1893 to 98M4197 inclusive. Part of 3N3325 Fuel System
shown on Pages 52A and 52C. 2S9519 Rack Stop, 8L9828 Governor and 9L9925 Fuel Pump
Housing parts are shown on Pages 40, 54 through 57B and 62 through 64A
FUEL PUMP HOUSING AND GOVERNOR
2N-2081 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (2N2081 N/S)
Serial No. 98M2321 to 98M3813 inclusive. Part of 2N8511 Fuel System shown on
Page 49. 2S9519 Rack Stop, 2N2083 Governor and 2N2082 Fuel Pump Housing
parts are shown on Pages 40, 58 through 59B, 65 and 66
FUEL PUMP HOUSING AND GOVERNOR
1N-9870 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (1N9870 N/S)
Serial No. 98M2257 to 98M4197 inclusive. Part of 2N8505 Fuel System shown on
Pages 50A and 50C. 1N9889 Torque Spring, 8L9828 Governor and 9L9925 Fuel
Pump Housing parts are shown on Pages 40, 41, 54 through 57B and 62 through 64A
FUEL PUMP HOUSING AND GOVERNOR
2N-2081 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (2N2081 N/S)
Serial No. 98M3814-Up. Part of 2N8511 Fuel System shown on Pages 49A
through 49D. 2S9519 Rack Stop, 2N2083 Governor and 4N7760 Pump Housing
parts are shown on Pages 40, 58 through 59B, 65, 66 and 66A
FUEL PUMP HOUSING AND GOVERNOR
8L-6382 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (8L6382 N/S)
Serial No. 98M4198-Up. Part of 8L6380 and 3N1282 Fuel Systems shown on
Pages 47 and 53F. 2S9519 Rack Stop, 8L9828 Governor and 4N7761 Fuel Pump
Housing parts are shown on Pages 40, 54 through 57B and 64B
FUEL PUMP HOUSING AND GOVERNOR
3N-3327 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (3N3327 N/S)
Serial No. 98M4198 to 98M7708 inclusive. Part of 3N3325 Fuel System shown on
Page 52D. 2S9519 Rack Stop, 8L9828 Governor and 4N7761 Fuel Pump Housing
parts are shown on Pages 40, 54 through 57B and 64B
FUEL PUMP HOUSING AND GOVERNOR
1N-9870 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (1N9870 N/S)
Serial No. 98M4198-Up. Part of 2N8505 Fuel System shown on Page 51
1N9889 Torque Spring, 8L9828 Governor and 4N7761 Fuel Pump Housing parts
are shown on Pages 40, 41, 54 through 57B and 64B
FUEL PUMP HOUSING AND GOVERNOR
3N-3327 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR (3N3327 N/S)
Serial No. 98M7709-Up. Part of 3N3325 Fuel System shown on Page 52D
2S9519 Rack Stop, 6N1622 Governor and 4N7761 Fuel Pump Housing parts are
shown on Pages 40, 59B-1, 59B-2 and 64B
FUEL PUMP TIMING ADVANCE GROUP
9L-9631 FUEL PUMP TIMING ADVANCE GROUP
9L9631 FUEL PUMP TIMING ADVANCE GROUP
Serial No. 98M1 to 98M511 inclusive
Part of 8L6380 Fuel System shown on Pages 43 and 45
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 1 of 2
Serial No. 98M1 to 98M339 inclusive
Only separate parts serviced
FUEL SYSTEM
8L-6380 FUEL SYSTEM
8L6380 FUEL SYSTEM--Part 2 of 2
Serial No. 98M1 to 98M339 inclusive. Fuel Pump Housing and Governor and 9L9631
Timing parts are shown on Pages 36 and 41. Only separate parts serviced
FUEL PUMP DRIVE GROUP
9L-7838 FUEL PUMP DRIVE GROUP
9L7838 FUEL PUMP DRIVE GROUP
Serial No. 98M4326-Up
Only separate parts serviced
FUEL PUMP HOUSING GROUP
9L-9925 FUEL PUMP HOUSING GROUP
9L9925 FUEL PUMP HOUSING GROUP--Type 1
Serial No. 98M1 to 98M4197 inclusive
Part of Fuel Pump Housing and Governor shown on Pages 36, 37 and 38
FUEL PUMP HOUSING GROUP
9L-9925 FUEL PUMP HOUSING GROUP
9L9925 FUEL PUMP HOUSING GROUP--Type 2
Serial No. 98M1 to 98M4197 inclusive
Part of Fuel Pump Housing and Governor shown on Pages 36, 37 and 38
FUEL PUMP HOUSING GROUP
9L-9925 FUEL PUMP HOUSING GROUP
9L9925 FUEL PUMP HOUSING GROUP--Type 3
Serial No. 98M1 to 98M4197 inclusive
Part of Fuel Pump Housing and Governor shown on Pages 36, 37 and 38
FUEL PUMP HOUSING GROUP
9L-9925 FUEL PUMP HOUSING GROUP
9L9925 FUEL PUMP HOUSING GROUP--Type 4
Serial No. 98M1 to 98M4197 inclusive
Part of Fuel Pump Housing and Governor shown on Pages 36, 37 and 38
FUEL PUMP HOUSING GROUP
4N-7761 FUEL PUMP HOUSING GROUP
4N7761 FUEL PUMP HOUSING GROUP
Serial No. 98M4198-Up
Part of 3N3327 and 1N9807 Fuel Pump Housing & Governor Groups shown on Pages 38A & 38B
FUEL PUMP HOUSING GROUP
2N-2082 FUEL PUMP HOUSING GROUP
2N2082 FUEL PUMP HOUSING GROUP--Type 1
Serial No. 98M2321 to 98M3813 inclusive
Part of Fuel Pump Housing and Governor shown on Page 38
FUEL PUMP HOUSING GROUP
2N-2082 FUEL PUMP HOUSING GROUP
2N2082 FUEL PUMP HOUSING GROUP--Type 2
Serial No. 98M2321 to 98M3813 inclusive
Part of Fuel Pump Housing and Governor shown on Page 38
FUEL PUMP HOUSING GROUP
4N-7760 FUEL PUMP HOUSING GROUP
4N7760 FUEL PUMP HOUSING GROUP
Serial No. 98M3814-Up
Part of 2N2081 Fuel Pump Housing and Governor Group shown on Page 38-1
PUMP ASSEMBLY
9H-2256 PUMP ASSEMBLY
9H2256 PUMP ASSEMBLY
Part of 2N1057 Fuel Priming Pump and
Lines Group shown on Page 105
FUEL PRIMING PUMP AND LINES GROUP
2N-1057 FUEL PRIMING PUMP AND LINES GROUP
2N1057 FUEL PRIMING PUMP AND LINES GROUP
9H2256 Pump parts are shown on Page 104A
TANK GP-FUEL
FUEL TANK GROUP
2N-3435 FUEL TANK GROUP
2N3435 FUEL TANK GROUP--50 U.S. Gallon
FOR USE WITH 2N2101 BASE GROUP AND DIESEL ELECTRIC SETS
8H4681 Filter parts are shown on Page 105
TORQUE CONTROL GP
TORQUE CONTROL GROUP
4N-8815 TORQUE CONTROL GROUP
4N8815 TORQUE CONTROL GROUP
Serial No. 98M4326-Up. Part of 4N6583 Governor and
Fuel Injection Pump Group shown on Page 38C
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
TORQUE CONTROL (6N509 N/S)
Serial No. 98M4326-Up. Part of 9N681 Governor and
Fuel Injection Pump Group shown on Page 38C-1
TORQUE CONTROL GROUP
4N-8815 TORQUE CONTROL GROUP
4N8815 TORQUE CONTROL GROUP--Type 2
Serial No. 98M4326-Up
Part of 4N6583 Governor and Fuel Injection Pump Group shown on Page 38C
STOP GP-RACK
2S-9519 STOP GP-RACK
2S9519 RACK STOP GROUP
Serial No. 98M1 to 98M775, 98M777 to 98M873, 98M995 and 98M1074 inclusive
Part of Fuel Pump Housing and Governor shown on Pages 36 and 37
STOP GP-RACK
2S-9519 STOP GP-RACK
2S9519 RACK STOP GROUP
Serial No. 98M776, 98M874 to 98M994, 98M996 to 98M1073 and 98M1075 to 98M1514
inclusive. Part of Fuel Pump Housing and Governor shown on Pages 37 and 38
STOP GP-RACK
2S-9519 STOP GP-RACK
2S9519 RACK STOP GROUP
Effective with Serial No. 98M1515
Part of Fuel Pump Housing and Governor shown on Pages 37 and 38
GOVERNOR TORQUE SPRING
1N-9889 GOVERNOR TORQUE SPRING
1N9889 GOVERNOR TORQUE SPRING--Type 1
AN ATTACHMENT
Also part of Fuel Pump Housing and Governor shown on Page 38
STOP GP-RACK
2S-9519 STOP GP-RACK
2S9519 RACK STOP GROUP--Type 2
Serial No. 98M1515-Up
Part of Fuel Pump Housing and Governor shown on Pages 37 & 38
GOVERNOR TORQUE SPRING GROUP
1N-9889 GOVERNOR TORQUE SPRING GROUP
1N9889 GOVERNOR TORQUE SPRING GROUP--Type 2
AN ATTACHMENT
Also part of Fuel Pump Housing and Governor shown on Page 38
SPRING GP-TORQUE
9L-9345 SPRING GP-TORQUE
9L9345 GOVERNOR TORQUE SPRING GROUP--Type 1
SPRING GP-TORQUE
9L-9345 SPRING GP-TORQUE
9L9345 GOVERNOR TORQUE SPRING GROUP--Type 2

Information:

(For parts list, see above)

Engine News
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter
1979/04/25
Service Magazine
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter{7462}
1979/04/02
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Magazine
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
Special Instruction
Test Sequence for Pencil Type Fuel Nozzles{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Engine News
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
New Governor Drive Gears And Weight Assemblies
1983/09/14
Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed
1984/03/07
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger
1977/06/29
Special Instruction
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Service Letter-NACD
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Equipment
3145, 3150 & 3160 INDUSTRIAL ENGINES
Hydraulic Governor
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Shutoff Solenoid<BR> (9L8791)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Letter-China
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump
3145, 3150 & 3160 INDUSTRIAL ENGINES
Remove Gear From Fuel Injection Pump Camshaft
3145, 3150 & 3160 INDUSTRIAL ENGINES
Automatic Timing Advance Unit (Engines With Engine Camshaft Mounted Timing Advance Unit)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Automatic Timing Advance Unit (Engines With Fuel Pump Camshaft Mounted Timing Advance Unit)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing And Governor (Engines With Taper Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing And Governor (Engines With Bolt On Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Governor
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines With Fuel Injection Pump Camshaft Mounted Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Earlier Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines with Engine Camshaft Mounted Timing Advance and Taper Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Later Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines With Bolt On Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft (Engines With Taper Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft (Engines With Bolt On Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Magazine
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger{0612,1253}
1977/06/20
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Engine News
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures
1980/04/30
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Tune-Up Kit And Remanufactured Nozzles Available
1984/09/12
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
New Fuel Nozzle Assembly Available
1977/05/13
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Specifications
Injection Nozzle
3145, 3150 & 3160 INDUSTRIAL ENGINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Disassembly and Assembly
Fuel Injection Lines
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Filter Base
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Nozzles
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Fuel Nozzle Assembly Available{1254}
1977/05/09
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Engine News
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Fuel Nozzle Assembly Available{1254}
1977/05/09
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Engine News
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter
1979/04/25
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Fuel Nozzle Assembly Available
1977/05/13
Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger
1977/06/29
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Service Letter-NACD
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Equipment
3145, 3150 & 3160 INDUSTRIAL ENGINES
Hydraulic Governor
3145, 3150 & 3160 INDUSTRIAL ENGINES
Injection Nozzle
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Shutoff Solenoid<BR> (9L8791)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Letter-China
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Filter Base
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Transfer Pump
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Nozzles
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Return Manifold
3145, 3150 & 3160 INDUSTRIAL ENGINES
Remove Gear From Fuel Injection Pump Camshaft
3145, 3150 & 3160 INDUSTRIAL ENGINES
Automatic Timing Advance Unit (Engines With Engine Camshaft Mounted Timing Advance Unit)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Automatic Timing Advance Unit (Engines With Fuel Pump Camshaft Mounted Timing Advance Unit)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing And Governor (Engines With Taper Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing And Governor (Engines With Bolt On Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Governor
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines With Fuel Injection Pump Camshaft Mounted Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Earlier Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines with Engine Camshaft Mounted Timing Advance and Taper Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Later Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines With Bolt On Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft (Engines With Taper Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft (Engines With Bolt On Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger{0612,1253}
1977/06/20
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter{7462}
1979/04/02
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
New Governor Drive Gears And Weight Assemblies
1983/09/14
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/11/30
Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed
1984/03/07
Tune-Up Kit And Remanufactured Nozzles Available
1984/09/12
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Fuel Nozzle Assembly Available
1977/05/13
Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger
1977/06/29
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Equipment
3145, 3150 & 3160 INDUSTRIAL ENGINES
Hydraulic Governor
3145, 3150 & 3160 INDUSTRIAL ENGINES
Injection Nozzle
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Shutoff Solenoid<BR> (9L8791)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Disassembly and Assembly
Fuel Transfer Pump
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Nozzles
3145, 3150 & 3160 INDUSTRIAL ENGINES
Remove Gear From Fuel Injection Pump Camshaft
3145, 3150 & 3160 INDUSTRIAL ENGINES
Automatic Timing Advance Unit (Engines With Engine Camshaft Mounted Timing Advance Unit)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Automatic Timing Advance Unit (Engines With Fuel Pump Camshaft Mounted Timing Advance Unit)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing And Governor (Engines With Taper Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing And Governor (Engines With Bolt On Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Governor
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing
3145, 3150 & 3160 INDUSTRIAL ENGINES
Rocker Arm Shaft Assembly
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines With Fuel Injection Pump Camshaft Mounted Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Earlier Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines with Engine Camshaft Mounted Timing Advance and Taper Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Later Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines With Bolt On Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft (Engines With Taper Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft (Engines With Bolt On Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed{1100,1101}
1984/03/05
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Fuel Nozzle Assembly Available{1254}
1977/05/09
Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger{0612,1253}
1977/06/20
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/11/26
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Service Magazine
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Engine News
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
New Governor Drive Gears And Weight Assemblies
1983/09/14
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/11/30
Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed
1984/03/07
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger
1977/06/29
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Service Letter-NACD
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Equipment
3145, 3150 & 3160 INDUSTRIAL ENGINES
Hydraulic Governor
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Shutoff Solenoid<BR> (9L8791)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump
3145, 3150 & 3160 INDUSTRIAL ENGINES
Remove Gear From Fuel Injection Pump Camshaft
3145, 3150 & 3160 INDUSTRIAL ENGINES
Automatic Timing Advance Unit (Engines With Engine Camshaft Mounted Timing Advance Unit)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Automatic Timing Advance Unit (Engines With Fuel Pump Camshaft Mounted Timing Advance Unit)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing And Governor (Engines With Taper Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing And Governor (Engines With Bolt On Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Governor
3145, 3150 & 3160 INDUSTRIAL ENGINES
Fuel Injection Pump Housing
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines With Fuel Injection Pump Camshaft Mounted Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Earlier Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines with Engine Camshaft Mounted Timing Advance and Taper Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Later Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft Gears (Engines With Bolt On Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft (Engines With Taper Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Camshaft (Engines With Bolt On Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Magazine
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger{0612,1253}
1977/06/20
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Service Magazine
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Disassembly and Assembly
Fuel Return Manifold
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Magazine
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
Specifications
Fuel Shutoff Solenoid<BR> (9L8791)
3145, 3150 & 3160 INDUSTRIAL ENGINES
Service Magazine
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
2003/12/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Engine News
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly
1979/04/25
Timing Groups To Be Canceled
1980/07/09
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Special Instruction
Using 8S2305, 9S228 And 9S240 Rack Position Tool Groups{650, 1250}
Using 8S2305, 9S228 And 9S240 Rack Position Tool Groups{650, 1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/11/27
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Service Magazine
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Engine News
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures
1980/04/30

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.