AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N4078 GOVERNOR GROUP-PART 3 OF 3 S/N 66B9720-Up D398 INDUSTRIAL ENGINE


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
ELECTRICAL AND STARTING SYSTEM
SHUTOFF GP

INDUSTRIAL ENGINE D398 INDUSTRIAL ENGINE 66B
 D398B ENGINE 66B03561-UP UEG0633S D398 66B   (1961)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
COVER GP-GOVERNOR
3N-2976 COVER GP-GOVERNOR
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2685 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2685 DRIVE GP-GOVERNOR & FUEL PUMP
 

#UEG0633S0140
 

3N-4078: GOVERNOR GP

3N4078 GOVERNOR GROUP-PART 3 OF 3
S/N 66B9720-Up
c308956 UEG0633S
3N4078 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4063 [1] LEVER ASSEM.  
  9S-4466 [1] LEVER ASSEM.  
  5H-1351 [1] PIN  
2. 9M-9788 [1] PLUNGER  
3. 4L-9971 [1] SPRING  
4. 9S-4468 [1] BOLT  
  2F-4159 [1] LOCK  
5. 6N-8629 [1] SEAT  
6. 4N-6681 [1] SPRING  
7. 9M-6303 [1] SPRING  
8. 4N-3887 [1] RING  
9. 1W-1132 C [1] WEIGHT ASSEM.  
10. 1S-5440 [2] DOWEL  
11. 2N-0477 [2] WEIGHT  
12. 9S-4673 [1] BAND ASSEM.  
13. 9F-6580 [2] BOLT  
  7F-2836 [2] LOCK  
14. 7L-8748 [1] COVER  
15. 6L-8027 [1] SHAFT  
  5M-6228 [2] BEARING  
16. 7L-8669 [1] LEVER  
17. 7L-0280 [1] PIN ASSEM.  
18. 7H-3639 [2] PIN  
19. 8S-7499 [1] PIN  
20. 7B-8105 [1] RING  
21. 2A-5546 [3] BOLT  
  9M-6293 [1] LOCK  
22. 2P-8725 [1] PISTON ASSEM.  
  1S-4741 [1] CYLINDER  
23. 7S-8447 [1] PISTON ASSEM.  
24. 7L-8777 [1] SLEEVE  
25. 8M-8997 [1] SEAL  
26. 7M-7219 [1] BEARING  
  7M-7193 [2] RACE  
27. 2P-8630 [1] DOWEL  
28. 2S-0007 [1] SLEEVE  
29. 9M-6302 [2] WASHER  
30. 6N-3504 [1] SEAT  
31. 8H-9181 [1] SPRING  
32. 8L-6206 [1] PLATE  
  8L-6207 [1] GASKET  
33. 2B-2695 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
34. 2N-3221 [1] GEAR (13 TEETH)  
35. 2N-0828 [2] WASHER  
  2P-9556 [1] SPACER  
36. 3K-0810 [1] RING  
  C   INDICATES CHANGE
 

#UEG0633S0141
 

2S-9519: STOP GP-RACK

2S9519 RACK STOP GROUP-TYPE 1
Part Of 8L5814 & 3N4078 Governors
c114355 UEG0633S
2S9519 STOP GP-RACK Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 9M-6292 [1] LOCK  
3. 8S-4317 [1] CONTACT  
4. 2S-7391 [1] BAR  
5. 8M-9062 [1] RETAINER  
6. 2S-7390 C [2] SPACER  
7. 3S-0602 [1] RETAINER  
8. 1P-6452 [1] INSULATOR  
  C   INDICATES CHANGE
 

#UEG0633S0142
 

2S-9519: STOP GP-RACK

2S9519 RACK STOP GROUP-TYPE 2
Part of 8L5814 & 3N4078 Governors
c214902 UEG0633S
2S9519 STOP GP-RACK Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 9M-6292 [1] LOCK  
3. 8M-9062 [1] RETAINER  
4. 1P-6452 [1] INSULATOR  
5. 3S-0602 [1] RETAINER  
6. 2S-7391 [1] BAR  
7. 1P-9958 C [1] INSULATOR  
8. 9L-7235 C [1] SHIM .991 m(.039 in.)thick  
9. 8S-4317 [1] CONTACT  
  C   INDICATES CHANGE
 

#UEG0633S0143
 

8L-4264: SHUT-OFF GP

8L4264 MANUAL SHUT-OFF GROUP
Serial No. 66B3561 To 66B5228 Inclusive
c135270 UEG0633S
8L4264 SHUT-OFF GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] BOLT  
2. [3] LOCKWASHER  
3. [1] CABLE  
4. [1] PIN  
5. [1] BRACKET  
6. [1] SPRING  
7. [4] NUT  
8. [1] WASHER  
9. [2] BOLT  
  [2] NUT  
  [2] WASHER  
10. [1] SHAFT  
11. [1] NUT  
12. [1] HANDLE  
13. [1] BRACKET  
14. [1] LINK  
15. [1] PIN  
  [1] COTTER PIN  
16. [1] WASHER  
 

#UEG0633S0144
 

8L-4264: SHUT-OFF GP

8L4264 MANUAL SHUT-OFF GROUP
Serial No. 66B5229 To 66B5451 Inclusive
c161191 UEG0633S
8L4264 SHUT-OFF GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-9814 C [1] BRACKET  
2. 3B-4506 C [2] LOCKWASHER  
3. 3L-8048 [1] CABLE  
4. 5H-1351 [1] PIN  
5. 5N-2583 C [1] BRACKET  
6. 9M-8266 [1] SPRING  
7. 4B-2049 [4] NUT  
8. 1F-1604 [1] WASHER  
9. 1A-2029 [2] BOLT  
  1D-4717 [2] NUT  
  4B-4278 [2] WASHER  
10. 5N-2582 C [1] SHAFT  
11. 1B-4203 [1] NUT  
12. 0L-1170 [1] HANDLE  
13. 5N-2584 C [1] GUIDE  
14. 8L-4262 [1] LINK  
15. 1B-1406 [1] PIN  
  3B-4604 [1] COTTER PIN  
16. 4B-4863 [1] WASHER  
17. 5L-4019 C [1] RING  
  C   INDICATES CHANGE
 

#UEG0633S0145
 

8L-4264: SHUT-OFF GP

8L4264 MANUAL SHUT-OFF GROUP-TYPE 1
Serial No. 66B5452-Up
c163643 UEG0633S
8L4264 SHUT-OFF GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-3816 C [1] BRACKET  
2. 3B-4506 [2] LOCKWASHER  
3. 3L-8048 [1] CABLE  
4. 9F-7882 C [1] PIN  
5. 5N-2583 [1] BRACKET  
6. 9M-8266 [1] SPRING  
7. 4B-2049 [4] NUT  
8. 1F-1604 [1] WASHER  
9. 1A-2029 [2] BOLT  
  1D-4717 [2] NUT  
  4B-4278 [2] WASHER  
10. 5N-2582 [1] SHAFT  
11. 1B-4203 [1] NUT  
12. 0L-1170 [1] HANDLE  
13. 5N-2584 [1] GUIDE  
14. 5N-3793 C [1] LINK  
15. 1B-1406 [1] PIN  
  3B-4604 [1] COTTER PIN  
16. 4B-4863 [1] WASHER  
17. 5L-4019 [1] RING  
18. 9F-5599 C [2] WASHER  
19. 3H-3237 C [1] ROLLER  
  C   INDICATES CHANGE
 

#UEG0633S0146
 

8L-4264: SHUT-OFF GP

8L4264 MANUAL SHUT-OFF GROUP-TYPE 2
Serial No. 66B5452-Up
c175405 UEG0633S
8L4264 SHUT-OFF GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-3816 [1] BRACKET  
2. 3B-4506 [2] LOCKWASHER  
3. 3L-8048 [1] CABLE  
4. 9F-7882 [1] PIN  
5. 5N-5865 C [1] BRACKET  
6. 9M-8266 [1] SPRING  
7. 4B-2049 [4] NUT  
8. 1F-1604 [1] WASHER  
9. 1A-2029 [2] BOLT  
  1D-4717 [2] NUT  
  4B-4278 [2] WASHER  
10. 5N-2582 [1] SHAFT  
11. 1B-4203 [1] NUT  
12. 0L-1170 [1] HANDLE  
13. 5N-5863 C [1] GUIDE  
14. 5N-3793 [1] LINK  
15. 1B-1406 [1] PIN  
  3B-4604 [1] COTTER PIN  
16. 4B-4863 [1] WASHER  
17. 8M-6393 C [1] RING  
18. 9F-5599 [2] WASHER  
19. 3H-3237 [1] ROLLER  
  C   INDICATES CHANGE
 

#UEG0633S0147
 

8L-5299: SHUT-OFF GP

8L5299 MECHANICAL SHUT-OFF GROUP-PART 1 OF 3
Serial No. 66B3561 To 66B3812 Inclusive
Also Part Of 5N8401 Electrical Shut-Off
c109953 UEG0633S
8L5299 SHUT-OFF GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5L-8695 [1] BRACKET  
  2B-2404 C [1] CLIP  
  3H-3433 [1] PIN (SPRING)  
  8L-5297 [1] TUBE (13.56" LONG)  
  4H-0094 [1] RING (SNAP)  
  2L-4666 [1] BEARING  
  2K-3455 [1] PIN  
  3L-5796 [1] GEAR (36 TEETH)  
    (PARTS OF SHAFT ASSEM. 3L5795)
  3L-5795 [1] SHAFT ASSEM.  
  9F-7022 [1] BOLT (1.50" LONG)  
  8F-6302 [4] BOLT (3.75" LONG)  
  3B-4504 [4] LOCKWASHER  
  4B-9747 [1] WASHER  
  7L-2116 [1] SPRING  
  7L-3239 [1] COLLAR  
  2K-3455 C [2] PIN (SPRING)  
  7L-3267 [1] CABLE ASSEM.  
  7H-3171 [1] PLUG  
  9M-6527 [2] WASHER  
  0T-0573 [1] BOLT  
  1D-4717 [1] NUT  
  3B-4506 [1] LOCKWASHER  
  6L-4418 [1] BUSHING  
  7L-5275 [1] SPRING  
  6L-1837 [1] LEVER  
  8B-7121 [1] FITTING  
  3B-3670 [1] BALL JOINT  
  4B-2049 [2] NUT  
  4L-7953 [1] ADAPTER ASSEM.  
  2L-4730 [1] GASKET  
  1L-5072 [2] DOWEL  
  4L-8152 [1] BUSHING  
  4L-5913 [1] DOWEL  
    (PARTS OF ADAPTER ASSEM.4L7953)
  6L-2151 [1] SHAFT  
  4L-7836 [1] BUSHING  
    (PART OF ADAPTER ASSEM.4L7953)
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEG0633S0148
 

8L-5299: SHUT-OFF GP

8L5299 MECHANICAL SHUT-OFF GROUP-PART 2 OF 3
Serial No. 66B3561 To 66B3812 Inclusive
Also Part Of 5N8401 Electrical Shut-Off
c108694 UEG0633S
8L5299 SHUT-OFF GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2L-3828 [1] GEAR ASSEM.  
  2L-3726 [1] GEAR (30 TEETH)  
  2L-3727 [1] GEAR (48 TEETH)  
  7L-4993 [2] DOWEL  
  6F-9091 [1] WASHER  
  4L-5692 [1] BUSHING  
  5B-3850 [1] WASHER  
  2H-3429 [1] RING  
  4B-5355 [2] WASHER  
  3B-4604 [2] COTTER PIN  
  1A-2169 [2] SPRING  
  2L-4368 [1] GUIDE  
  9M-6803 [1] DOWEL  
    (PART OF PISTON ASSEM. 2L4729)
  2L-4729 [1] PISTON ASSEM.  
  2L-3467 [1] WEIGHT  
  3H-1118 [1] PIN (SPRING)  
  4L-0895 [1] PLUNGER  
  1A-0654 [1] SPRING  
  8M-5250 [2] SEAL  
  [1] SPRING  
  3L-3964 [1] PLUNGER  
  3L-3967 [1] BUTTON  
  3H-1394 [1] SCREW  
  3L-3966 [1] PIN  
    ONLY ONE OF THE FOLLOWING SPRINGS IS REQUIRED:
  4L-1648 [1] SPRING (900 - 1100 R.P.M.)  
  2L-8705 [1] SPRING (1200 - 1400 R.P.M.)  
  2L-3468 [1] SCREW  
  2L-3409 [1] NUT  
  3L-3962 [1] CARRIER ASSEM.  
  2L-3725 [1] GEAR (24 TEETH)  
    (PART OF CARRIER ASSEM.3L3962)
  3B-8995 [1] FITTING  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8995)
  3D-8823 [1] BUSHING  
  8B-4128 [1] COVER  
  6B-8241 [1] GASKET  
  1H-8293 [2] SCREW  
    (USED WITHOUT TACHOMETER DRIVE)
  5L-9730 [1] COVER  
  4L-9514 [1] GASKET  
  2B-7409 [1] PLUG  
    (USED WITHOUT WATER TEMPERATURE SHUT-OFF)
  2B-2694 [1] BOLT  
  3B-4505 [1] LOCKWASHER  
  8F-6223 [1] PLUG  
  6B-0387 [1] GASKET  
 

#UEG0633S0149
 

8L-5299: SHUT-OFF GP

8L5299 MECHANICAL SHUT-OFF GROUP-PART 3 OF 3
Serial No. 66B3561 To 66B3812 Inclusive
Also Part Of 5N8401 Electrical Shut-Off
c139569 UEG0633S
8L5299 SHUT-OFF GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6L-7211 [1] SLIDE ASSEM.  
    (PART OF HOUSING ASSEM.4L9903)
  2L-3728 [1] GEAR (60 TEETH)  
  7L-0811 [1] PIN (SPRING)  
  9S-1343 C [1] PLUG  
  2H-0191 C [2] BOLT  
  4B-4274 C [2] WASHER  
  4B-1283 [2] SCREW  
  3L-1744 [1] GASKET  
  2H-3903 [1] SCREW  
  5L-3616 [1] SPACER  
  2L-7996 [1] SPRING  
  2L-5203 [1] BUSHING  
    (PART OF HOUSING ASSEM. 4L9903)
  4F-9325 [1] GASKET  
  2L-6261 [1] PLUG  
  3L-3961 [1] BUSHING  
    (PART OF HOUSING ASSEM.4L9903)
  2L-4403 C [1] SPRING  
  2L-4365 [1] DOWEL  
    (PARTS OF HOUSING ASSEM. 4L9903)
  9S-1369 C [1] GASKET  
  4L-9903 [1] HOUSING ASSEM.  
  2L-4367 [2] PIN  
    (PART OF HOUSING ASSEM.4L9903)
  2L-4725 [1] LATCH  
  3L-3076 [1] SPRING  
  7L-2121 [1] PLUG  
  9S-1369 C [1] GASKET  
  7L-6597 [1] SEAL  
  C   INDICATES CHANGE
 

Information:

Engine News
Improved Woodward Governor Groups
1979/01/10
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump
1979/08/08
Service Kit Is Available For Woodward UG8 Governor
1979/09/19
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure
1980/01/23
Woodward Governor Available For Parallel Generator Applications
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure
1981/10/21
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16
New Bolts And Plate Used On Governor Drive Group
1983/05/25
New Actuator Cylinder Used In Air Shutoff
1983/08/17
New Governor Drive Gears And Weight Assemblies
1983/09/14
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New EG3P Actuator Assemblies Available
1984/03/07
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
Increased Preload Used In Air Shutoff Actuators
1985/03/01
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines
1985/08/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Current 7N2703 UG8 Governor Group Has Larger Range Of Droop Adjustment
1993/09/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improved Gasket Prevents Oil Leakage From The Governor
1978/01/18
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 5N1997 Governor Shield Group{1264}
Installation Of 5N1997 Governor Shield Group{1264}
Specifications
Fuel Injection Equipment
D399, G399, D398, G398, D379, G379 ENGINES
Fuel Transfer Pump; (6L9697 And 1N5415)
D399, G399, D398, G398, D379, G379 ENGINES
Fuel Pump And Governor Drive
D399, G399, D398, G398, D379, G379 ENGINES
Governor Control Linkage<BR> (Hydra-Mechanical)
D399, G399, D398, G398, D379, G379 ENGINES
Governor; (7L8787, 8L5814 and 7L4352)
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward EG-3P) D379 68B1616-Up, D398 66B2049-Up, D399 35B1-Up
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward UG-8) D379 68B1616-Up, D398 66B2049-Up, D399 35B1-Up
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward UG-8) G379 72B264-403, G398 73B511-795, G399 49C1-172
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward EG-3P) G379 72B264-403, G398 73B511-795
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward UG-8 And EG-3P) G379 72B404-UP, G398 73B796-UP, G399 49C173-UP
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward SGT) D379 68B1616-UP
D399, G399, D398, G398, D379, G379 ENGINES
Governor Drive Upper Housing<BR> (Woodward Governor)
D399, G399, D398, G398, D379, G379 ENGINES
Governor Air Actuators<BR> (2N6006, 1N9318, 7L135)
D399, G399, D398, G398, D379, G379 ENGINES
Fuel Injection Equipment
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Control Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Pump And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Air Actuators
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
3N9125 Air Actuator Group
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
2N6006 Governor Air Actuator
D399, G399, D398, G398, D379, G379 ENGINES
1N9318 &amp; 7L135 Governor Air Actuators
D399, G399, D398, G398, D379, G379 ENGINES
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03
Woodward Governor Available For Parallel Generator Applications{1289,1264}
1981/04/06
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
New Bolts And Plate Used On Governor Drive Group{1288,1264}
1983/05/30
New Actuator Cylinder Used In Air Shutoff{7418,1078}
1983/08/15
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New EG3P Actuator Assemblies Available{1289}
1984/02/27
Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
Preferred Engine Timing Procedures{1250,1286,1290,1292}
1984/11/05
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Increased Preload Used In Air Shutoff Actuators{7400,7418}
1985/02/18
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines{1288}
1985/08/05
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Improved Woodward Governor Groups{1264,1289}
1979/01/08
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump{1256,1206}
1979/08/06
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Service Kit Is Available For Woodward UG8 Governor{1289}
1979/08/27

Caterpillar Parts SIS Catalog D398 :

GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
STOP GP-RACK
2S-9519 STOP GP-RACK
STOP GP-RACK
2S-9519 STOP GP-RACK
SHUT-OFF GP
8L-4264 SHUT-OFF GP
SHUT-OFF GP
8L-4264 SHUT-OFF GP
SHUT-OFF GP
8L-4264 SHUT-OFF GP
SHUT-OFF GP
8L-4264 SHUT-OFF GP
SHUT-OFF GP
8L-5299 SHUT-OFF GP
SHUT-OFF GP
8L-5299 SHUT-OFF GP

Truck sale:

 
95,000 
Caterpillar D398, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar D398, Construction
95,000 
Caterpillar D398, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
CAT D398
USD $18,000 
CAT D398

Contractor Sales
Pocatello, Idaho
 
$95,000 USD 
CATERPILLAR D398 1978
- INDUSTRIAL
LOUISIANA CAT POWER SYSTEMS
5415 E. Broad St. - Lake Charles - Lou
CATERPILLAR D398 1972
$30,000 USD 
CATERPILLAR D398 1972
- STATIONARY GENERATOR SETS
HOLT OF CALIFORNIA - POWER SYSTEMS
- - United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.