AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5N4159 TURBOCHARGER GROUP 7N2515-Page 126C D398 INDUSTRIAL ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
EXHAUST GP
OPERATOR STATION
PYROMETER GP

INDUSTRIAL ENGINE D398 INDUSTRIAL ENGINE 66B
 D398B ENGINE 66B03561-UP UEG0633S D398 66B   (1961)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBO GP
8S-2743 TURBO GP
TURBOCHARGER GP
6N-8455 TURBOCHARGER GP
TURBOCHARGER GP
5N-4159 TURBOCHARGER GP
TURBOCHARGER GP
7N-2515 TURBOCHARGER GP
TURBOCHARGER GP
1P-0710 TURBOCHARGER GP
TURBOCHARGER GP
1P-1251 TURBOCHARGER GP
 

#UEG0633S0770
 

5N-4159: TURBOCHARGER GP

5N4159 TURBOCHARGER GROUP
7N2515-Page 126C
c228513 UEG0633S
5N4159 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2515 RY [2] TURBOCHARGER GROUP  
    (Separate Illustration)
2. 3N-3368 [1] PIPE  
3. 1B-5174 [1] PLUG  
4. 5L-4182 [1] EXTENSION  
5. 0S-1587 [12] BOLT  
  1B-5357 [12] NUT  
6. 5L-3773 [1] GASKET  
7. 6L-2961 [2] RING  
  6L-2960 [2] EXPANDER  
8. 5L-8856 [2] COUPLING  
9. 1S-4810 [2] GASKET  
10. 0S-1594 C [4] BOLT  
  5M-2894 [4] WASHER  
11. [1] TUBE ASSEM.  
12. 9H-6067 [2] SEAL  
13. 2N-2765 [8] BOLT  
  2N-2766 [8] LOCKNUT  
14. 1S-4295 [2] GASKET  
15. 3J-5389 [2] PLUG  
16. 5M-6213 [2] PLUG  
17. 6L-9217 [1] TUBE ASSEM.  
18. 5P-0599 [2] CLAMP  
19. 7L-7728 [2] HOSE  
20. 4J-8536 [2] CLAMP  
21. 6L-9541 [2] RING  
  6L-9542 [2] EXPANDER  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UEG0633S0771
 

7N-2515: TURBOCHARGER GP

7N2515 TURBOCHARGER GROUP*R
Part Of 5N4159 Turbocharger
c228514 UEG0633S
7N2515 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0111 R [1] CARTRIDGE GP-TURBOCHARGER  
  7N-0239 J [1] NUT-TURBO COMPRESSOR  
2. 9N-2378 [1] WHEEL-COMPRESSOR  
3. 5S-4556 [1] INSERT  
4. 5S-4546 J [1] RING-RETAINING  
5. 5P-5757 J [1] SEAL-O-RING  
6. 5S-4554 J [1] SEAL-O-RING  
7. 8S-9223 [1] BEARING-THRUST  
8. 5S-4550 [2] RING-THRUST  
9. 5S-4557 J [2] BEARING  
10. 4M-6983 J [4] RING-RETAINING  
11. 4N-9540 R [1] HOUSING AS-CENTER  
  5S-5199 C [1] PIN-GROOVE  
12. 4N-9556 [1] SHROUD  
13. 4M-6990 J [1] RING-SNAP  
14. 5S-4551 J [1] SLEEVE-OIL CONTROL  
15. 7N-2856 CJ [1] RING-SEAL  
16. 9S-8993 R [1] WHEEL AS-TURBINE  
17. 8H-3710 [2] SCREW-TAPPING  
18. 9S-1180 [1] NAMEPLATE  
19. 5S-4547 J [1] SLEEVE-SPACER  
20. 5S-4549 J [1] DEFLECTOR-OIL  
21. 8S-9222 J [1] SLEEVE  
22. 4M-8013 J [2] RING-PISTON  
23. 5S-4517 [1] CLAMP AS  
  7M-9918 [1] NUT-SELF LOCKING  
24. 9S-8996 R [1] HOUSING-TURBINE  
25. 5S-4558 [1] CLAMP AS-COMPRESSOR  
  7M-9918 [1] NUT-SELF LOCKING  
26. 4N-3755 [1] COVER-COMPRESSOR  
27. 5S-4545 [1] NAMEPLATE  
28. 4N-3955 [1] GASKET  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  6N-7245 [1] KIT-CARTRIDGE REPAIR  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0633S0772
 

1P-0710: TURBOCHARGER GP

1P710 TURBOCHARGER GROUP-2 REQUIRED
c109967 UEG0633S
1P0710 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-1304 H [1] CLAMP  
  7M-9918 H [1] NUT  
  9M-9545 [1] SEAL  
  1S-7114 [8] BOLT  
  9M-9939 [4] PLATE (Lock)  
  2S-1309 [1] HOUSING  
  9S-1517 H [1] HOUSING (Turbine)  
  1S-6563 H [1] NOZZLE  
  9M-9938 [1] PLATE  
  7S-7759 R [1] SHAFT AND WHEEL ASSEM.  
  4M-6990 [1] RING  
  4S-9248 [2] RING  
  1S-3887 [1] SPACER  
  [1] BEARING  
    (Plain)
    (Part of 3S5854 Bearing Group)
  2S-1507 [1] PLATE (Name)  
  8H-3710 [1] SCREW  
    (Not Shown)
  1P-2428 R [1] CARTRIDGE ASSEM.  
    (Consists of all parts except those marked H)
  8S-4049 H [1] COVER (Compressor)  
  7M-7611 [3] RING  
  3S-5854 [1] BEARING GROUP  
  [1] BEARING  
    (Grooved)
    (Part of 3S5854 Bearing Group)
  8H-3710 H [2] SCREW  
  7M-9920 H [1] PLATE (Name)  
  2S-1186 [1] BEARING  
  7M-9910 [3] MACHINE SCREW  
  7M-9919 [3] PLATE (Lock)  
  2S-1310 [1] SPACER  
  7M-9908 [1] SLEEVE  
  4M-8012 [1] NUT  
  8M-7167 [1] SHIM (.003" Thick)  
  8M-7168 [1] SHIM (.005" Thick)  
  8M-7169 [1] SHIM (.010" Thick)  
  4M-8013 [2] RING  
  9M-9932 [1] WHEEL  
  7M-9923 [1] SPACER  
  2S-1185 [2] RING  
  2S-1307 [1] RING  
  2S-1305 [1] INSERT  
  3S-1427 [1] SEAL  
  2S-1308 [1] DEFLECTOR  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0633S0773
 

6L-3641: FLANGE GP-EXHAUST

6L3641 EXHAUST FLANGE GROUP-12 INCH
c76349 UEG0633S
6L3641 FLANGE GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5L-6900 [1] FLANGE  
  0S-1583 [12] BOLT  
  3B-4512 [12] LOCKWASHER  
  5L-6943 [1] GASKET  
 

#UEG0633S0774
 

5L-6796: FITTING GP-EXHAUST

5L6796 VERTICAL EXHAUST FITTING GROUP-12 INCH FLEXIBLE
c228233 UEG0633S
5L6796 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5L-6954 H [1] ELBOW  
  5L-6900 [1] FLANGE  
  5L-6943 [1] GASKET  
  0S-1583 [12] BOLT  
  3B-4512 [12] LOCKWASHER  
  5L-3773 [1] GASKET  
  5P-5855 C [16] BOLT  
  1B-5357 C [16] NUT  
  5L-6297 [1] ADAPTER  
  C   INDICATES CHANGE
  H   NOT PART OF 5L6796 EXHAUST FITTING
 

#UEG0633S0775
 

2W-7848: FITTING GP-EXHAUST

2W7848 EXHAUST FITTING GP-FLEXIBLE-8 INCH (203MM)
c314133 UEG0633S
2W7848 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-6297 [1] ADAPTER AS-FLEXIBLE  
2. 5L-3773 [1] GASKET-EXHAUST ELBOW  
3. 5P-5855 [8] BOLT-12 POINT HEAD  
4. 1B-5357 [8] NUT-FULL  
 

#UEG0633S0776
 

2W-7852: FLANGE GP-EXHAUST

2W7852 EXHAUST FLANGE GROUP-8 INCH (203MM)
c314149 UEG0633S
2W7852 FLANGE GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7853 [1] FLANGE-EXHAUST  
2. 5L-3773 [1] GASKET-EXHAUST ELBOW  
3. 5P-5855 [8] BOLT-12 POINT HEAD  
4. 1B-5357 [8] NUT-FULL  
5. 5P-8245 [8] WASHER  
 

#UEG0633S0777
 

5N-9527: FITTING GP-EXHAUST

5N9527 EXHAUST FITTING GP-FLEXIBLE-12 INCH (305MM)
For Use On Watercooled & Hot Exhaust Stacks
c322763 UEG0633S
5N9527 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-4398 CJ [12] BOLT  
  1B-5357 CJ [12] NUT-FULL  
  5P-8245 CJ [24] WASHER  
2. 5N-9505 [1] FITTING AS-EXHAUST  
3. 0S-1571 [12] BOLT  
  1B-5355 C [12] NUT-FULL  
  5M-2894 [12] WASHER  
4. 2W-7873 C [1] GASKET-EXHAUST  
   
    J-FOR USE WITH
    1W5532 ELBOW OR
    7N6959 ADAPTER
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0633S0778
 

2W-7871: FLANGE GP-EXHAUST

2W7871 EXHAUST FLANGE GP-12 INCH (305MM)
c343297 UEG0633S
2W7871 FLANGE GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7872 [1] FLANGE-EXHAUST  
2. 2W-7873 [1] GASKET-EXHAUST  
3. 0S-1571 B [12] BOLT 44.45MM(1.75IN)LG.  
  1B-5355 B [12] NUT-FULL 14.29MM(.562IN)O.D.  
  9L-9132 B [24] WASHER 10.2MM(.402IN)I.D.  
    -OR-
4. 5L-4398 B [12] BOLT 57.15MM(2.25IN)LG.  
  1B-5357 B [12] NUT-FULL 19.05MM(.75IN)O.D.  
  5P-8245 B [24] WASHER 13.5MM(.531IN)I.D.  
  B   USE AS REQUIRED
 

#UEG0633S0779
 

3N-8277: CHART-PYROMETER

3N8277 PYROMETER CHART
S/N 66B4014-Up
UEG0633S0779 UEG0633S
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3N-8276 [1] PYROMETER GROUP SINGLE  
  3N-8271 [1] SWITCH SELECTOR  
  5N-9365 [12] TERMOCOUPLE  
  3N-8273 [12] ADAPTER 1/8" PIPE THREAD  
  5N-9366 [12] THERMOCOUPLE LEAD ASSEMBLY  
  3N-8275 [1] PYROMETER GROUP TWIN  
  5N-9365 [2] THERMOCOUPLE  
  3N-8278 [2] ADAPTER 1/2" PIPE THREAD  
  5N-9366 [2] THERMOCOUPLE LEAD ASSEMBLY  
  3N-8276 [1] PYROMETER GROUP SINGLE  
  3N-8271 [1] SWITCH SELECTOR  
  5N-9365 [14] THERMOCOUPLE  
  3N-8273 [12] ADAPTER 1/8" PIPE THREAD  
  3N-8278 [2] ADAPTER 1/2" PIPE THREAD  
  5N-9366 [14] THERMOCOUPLE LEAD ASSEMBLY  
  5N-9365 [12] THERMOCOUPLE  
  3N-8273 [12] ADAPTER 1/8" PIPE THREAD  
  5N-9366 [12] THERMOCOUPLE LEAD ASSEMBLY  
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
"Off-Size" Bearing Kits Available
1991/10/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Oil Strainer (Screen) Added To Turbocharger Thrust Bearing
1978/02/08
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Two Strainers are Available to Protect the Bearings in Turbochargers {1052}
2001/08/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation Of 1P1122 Thrust Bearing Conversion Kit{1052}
Installation Of 1P1122 Thrust Bearing Conversion Kit{1052}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W724 Turbocharger Cartridge Repair Kit{1053}
2W724 Turbocharger Cartridge Repair Kit{1053}
2W725 Turbocharger Cartridge Repair Kit{1053}
2W725 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger<BR> (Schwitzer) (4HD857, 4MD455, 4ME435, 4HD755 And 4HF845)
D399, G399, D398, G398, D379, G379 ENGINES
Turbocharger Lubrication Valve
D399, G399, D398, G398, D379, G379 ENGINES
Turbocharger
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Turbocharger Lubrication Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Intake Manifolds
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Turbocharger Lubrication Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Turbocharger Heat Shield
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Turbocharger
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Oil Strainer (Screen) Added To Turbocharger Thrust Bearing{1052,1053}
1978/01/30
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog D398 :

TURBOCHARGER GP
6N-8455 TURBOCHARGER GP
TURBO GP
8S-2743 TURBO GP
TURBOCHARGER GP
6N-3529 TURBOCHARGER GP
TURBOCHARGER GP
6N-3528 TURBOCHARGER GP
TURBOCHARGER GP
3N-9163 TURBOCHARGER GP
TURBOCHARGER GP
3N-9163 TURBOCHARGER GP
TURBOCHARGER GP
3N-9163 TURBOCHARGER GP
TURBOCHARGER GP
6L-3066 TURBOCHARGER GP
TURBOCHARGER GP
7N-2515 TURBOCHARGER GP
TURBOCHARGER GP
1P-0710 TURBOCHARGER GP
FLANGE GP-EXHAUST
6L-3641 FLANGE GP-EXHAUST
FITTING GP-EXHAUST
5L-6796 FITTING GP-EXHAUST
FITTING GP-EXHAUST
2W-7848 FITTING GP-EXHAUST
FLANGE GP-EXHAUST
2W-7852 FLANGE GP-EXHAUST
FITTING GP-EXHAUST
5N-9527 FITTING GP-EXHAUST
FLANGE GP-EXHAUST
2W-7871 FLANGE GP-EXHAUST

Truck sale:

 
95,000 
Caterpillar D398, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar D398, Construction
95,000 
Caterpillar D398, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
CAT D398
USD $18,000 
CAT D398

Contractor Sales
Pocatello, Idaho
 
$95,000 USD 
CATERPILLAR D398 1978
- INDUSTRIAL
LOUISIANA CAT POWER SYSTEMS
5415 E. Broad St. - Lake Charles - Lou
CATERPILLAR D398 1972
$30,000 USD 
CATERPILLAR D398 1972
- STATIONARY GENERATOR SETS
HOLT OF CALIFORNIA - POWER SYSTEMS
- - United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.