AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N2677 CYLINDER BLOCK AND COVERS GROUP--Front View - Part 2 of 2 Serial No. 68B7661-Up D379 INDUSTRIAL ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
DAMPER GP
CRANKSHAFT GP
DAMPER GP
CRANKSHAFT GP

INDUSTRIAL ENGINE D379 INDUSTRIAL ENGINE 68B
 D379B ENGINE 68B02540-UP UEG0634S D379 68B   (1961)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CRANKCASE EXPLOSION RELIEF VALVE ARRANGEMENT
3N-6379 CRANKCASE EXPLOSION RELIEF VALVE ARRANGEMENT
CRANKCASE EXPLOSION RELIEF VALVE ARRANGEMENT
2N-8816 CRANKCASE EXPLOSION RELIEF VALVE ARRANGEMENT
VALVE AR-EXPLOSION RELIEF
3N-6398 VALVE AR-EXPLOSION RELIEF
 

#UEG0634S0070
 

3N-2677: CYLINDER BLOCK & COVERS GP

3N2677 CYLINDER BLOCK AND COVERS GROUP--Front View - Part 2 of 2
Serial No. 68B7661-Up
c182792 UEG0634S
3N2677 CYLINDER BLOCK & COVERS GP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1A-1135 [4] BOLT  
  2A-4462 [2] LOCK  
  8N-4708 [8] BAND  
  8L-4857 [4] COVER  
  1F-4419 [4] GASKET  
  0S-0509 [42] BOLT  
    19.05 mm(.75 in.) long
  3B-4506 [42] LOCKWASHER  
  6L-7815 [24] SEAL  
  8N-9174 [8] LINER  
  1A-9759 [8] DOWEL  
  2N-4518 [1] PLATE ASSEM.  
  2N-4516 [1] ADAPTER  
    (PART OF 2N4518 ASSEM.)
  8F-8145 [1] FLANGE  
  1F-3131 [1] GASKET  
  1B-5174 [1] PLUG  
  0S-1588 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1F-4418 [3] COVER  
  1F-9223 [3] GASKET  
  5F-0304 [1] PLUG  
  5B-8932 [1] GASKET  
  0S-0509 CH [3] BOLT  
  3B-4506 CH [3] LOCKWASHER  
  0S-0509 C [60] BOLT  
  3B-4506 C [60] LOCKWASHER  
  6L-2787 [1] HOUSING  
    (FLYWHEEL)
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#UEG0634S0071
 

4L-8791: CRANKSHAFT GP

4L8791 CRANKSHAFT GROUP--Type 1
Serial No. 68B2540 to 68B3213 and 68B3893 to 68B4397 inclusive
Refer also to Pages 134 & 134A for special parts
c137414 UEG0634S
4L8791 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1594 [24] BOLT  
  3B-4506 [24] LOCKWASHER  
  7L-2534 [2] RING  
  5L-7856 [1] THROWER  
  2N-7048 [5] BEARING (STANDARD)  
  5L-4184 [5] BEARING (050" UNDERSIZE)  
  5L-2093 [2] GASKET  
  8L-3972 [2] BAFFLE  
  8L-9802 [8] PLUG  
    (PART OF 5L6286 ASSEM.)
  8L-9835 [8] RING (SNAP)  
  0L-1024 [8] PLUG  
    (PART OF CRANKSHAFT ASSEM. 5L6286)
  5L-6286 [1] CRANKSHAFT ASSEM.  
  5L-1857 [1] ADAPTER  
  3N-3234 C [2] RING  
  5L-7858 [1] THROWER  
  6F-7035 [10] BOLT  
  3B-4514 [10] LOCKWASHER  
  C   INDICATES CHANGE
 

#UEG0634S0072
 

4L-8791: CRANKSHAFT GP

4L8791 CRANKSHAFT GROUP-TYPE 2
Serial No. 68B2540 To 68B3213 & 68B3893 To 68B4397
And 68B6509 To 68B7892 Inclusive
Refer Also To Pages 134 And 134A For Special Parts
c229870 UEG0634S
4L8791 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-3972 [2] BAFFLE  
2. 3N-3234 [2] RING  
3. 3N-9160 C [2] RING  
4. 3N-7326 C [1] THROWER  
5. 8N-7764 C [5] BEARING (Standard)  
  8N-7765 AB BEARING-MAIN (0.63-U.S.)  
  8N-7766 AB BEARING-MAIN (1.27-U.S.)  
  8N-7767 AB BEARING-MAIN (0.63-O.S.)  
  8N-7768 AB BEARING-MAIN (0.63-U.S.-0.63-O.S.)  
  2N-7117 C [5] BEARING (.050" Undersize)  
6. 3N-2957 RC [1] CRANKSHAFT ASSEM.  
    (Includes)
7. 5P-3476 [4] BOLT  
8. 7B-0537 [8] DOWEL  
9. 5L-2683 [8] BOLT  
10. 3N-7327 C [1] THROWER  
11. 5L-1857 [1] ADAPTER  
12. 6F-7035 [10] BOLT  
  3B-4514 [10] LOCKWASHER  
13. 0S-1594 [24] BOLT  
  3B-4506 [24] LOCKWASHER  
14. 5L-2093 [2] GASKET  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0634S0073
 

4W-2574: CRANKSHAFT GP

4W2574 CRANKSHAFT GROUP
Serial No. 68B7893-Up
c318374 UEG0634S
4W2574 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2567 [1] ADAPTER-SEAL  
2. 4W-2607 [1] SEAL GP-CRANKSHAFT  
3. 4W-2566 [1] ADAPTER-SEAL  
4. 4W-2606 [1] SEAL GP-CRANKSHAFT  
5. 8N-7764 [5] BEARING-MAIN (STANDARD)  
  8N-7765 AB BEARING-MAIN (0.63-U.S.)  
  8N-7766 AB BEARING-MAIN (1.27-U.S.)  
  8N-7767 AB BEARING-MAIN (0.63-O.S.)  
  8N-7768 AB BEARING-MAIN (0.63-U.S.-0.63-O.S.)  
  2N-7117 [5] BEARING 1.27MM(.05IN)U.S.  
6. 3N-2957 R [1] CRANKSHAFT AS  
  5L-2662 [4] COUNTERWEIGHT  
7. 5P-3476 [4] BOLT-SOCKET HEAD  
8. 7B-0537 [8] DOWEL  
9. 5L-2683 [8] BOLT  
10. 5L-2093 [2] GASKET  
11. 3N-7821 [1] ADAPTER  
12. 6F-7035 [10] BOLT  
13. 0S-1594 [24] BOLT  
  [1] FORM  
    INSTALLATION OF
    CRANKSHAFT SEAL)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0634S0074
 

3N-7968: CRANKSHAFT GROUP

3N7968 CRANKSHAFT GROUP
Serial No. 68B3214 to 68B3892 and 68B4398 to 68B4863 inclusive
Refer also to Pages 134 & 134A for special parts
c153176 UEG0634S
3N7968 CRANKSHAFT GROUP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-3168 [1] ADAPTER  
2. 3N-3166 [2] SEAL  
3. 3N-7311 [2] SLEEVE  
  3N-8049 [1] LOCKTITE KIT  
4. 7D-1979 [2] SEAL  
5. 2N-7048 [5] BEARING  
6. 3N-2957 R [1] CRANKSHAFT ASSEM.  
    (Includes)
7. 5P-3476 [4] BOLT  
8. 7B-0537 [8] DOWEL  
9. 5L-2683 [8] BOLT  
10. 3N-3170 [1] ADAPTER  
11. 1A-9579 [8] BOLT  
  3B-4505 [8] LOCKWASHER  
  3N-3333 [8] SPACER  
12. 3N-7821 [1] ADAPTER  
13. 6F-7035 [10] BOLT  
  3B-4514 [10] LOCKWASHER  
14. 0S-1594 [24] BOLT  
  3B-4506 [24] LOCKWASHER  
15. 5L-2093 [2] GASKET  
16. 6K-4936 [8] BOLT  
  3F-1417 [8] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0634S0075
 

3N-7968: CRANKSHAFT GROUP

3N7968 CRANKSHAFT GROUP
Serial No. 68B4864 to 68B6508 inclusive
Refer also to Pages 134 & 134A for special parts
c220631 UEG0634S
3N7968 CRANKSHAFT GROUP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-3972 C [1] BAFFLE  
2. 3N-3166 C [1] SEAL  
3. 3N-7311 C [1] SLEEVE  
  3N-8049 [1] LOCKTITE KIT  
4. 7D-1979 C [1] SEAL  
5. 2N-7048 [5] BEARING  
6. 3N-2957 R [1] CRANKSHAFT ASSEM.  
    (Includes)
7. 5P-3476 [4] BOLT  
8. 7B-0537 [8] DOWEL  
9. 5L-2683 [8] BOLT  
10. 3N-3170 [1] ADAPTER  
11. 1A-9579 [8] BOLT  
  3B-4505 [8] LOCKWASHER  
  3N-3333 [8] SPACER  
12. 3N-7821 [1] ADAPTER  
13. 6F-7035 [10] BOLT  
  3B-4514 [10] LOCKWASHER  
14. 0S-1594 [24] BOLT  
  3B-4506 [24] LOCKWASHER  
15. 5L-2093 [2] GASKET  
16. 3N-3234 C [1] RING  
17. 3N-9160 C [1] RING  
18. 3N-7326 C [1] THROWER  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0634S0076
 

3N-9587: DAMPER GROUP

3N9587 DAMPER GROUP
Serial No. 68B4398 to 68B6508 inclusive
AN ATTACHMENT
c156190 UEG0634S
3N9587 DAMPER GROUP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-1793 [1] DAMPER ASSEM.  
2. 0S-1587 [10] BOLT  
  3B-4508 [10] LOCKWASHER  
  3B-7654 [10] WASHER  
3. 3N-8785 [1] ADAPTER  
4. 0T-0603 [10] BOLT  
  4M-6953 [10] WASHER  
 

#UEG0634S0077
 

3N-8008: SEAL GP-CRANKSHAFT CONVERSION

3N8008 CRANKSHAFT CONVERSION SEAL GROUP--Field Installation
c152603 UEG0634S
3N8008 SEAL GP-CRANKSHAFT CONVERSION Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-2093 [1] GASKET  
2. 3N-3170 [1] ADAPTER  
3. 3N-7821 H [1] ADAPTER  
    (Use with 5L1857 Adapter)
  3N-7822 H [1] ADAPTER  
    (Use with 4L8819 Adapter)
  3N-7823 H [1] ADAPTER  
    (Use with 7L2571 Adapter)
4. 1A-9579 [8] BOLT  
  3B-4505 [8] LOCKWASHER  
  3N-3333 [8] SPACER  
5. 7D-1979 [1] SEAL  
6. 3N-7311 [1] SLEEVE  
7. 3N-3166 [1] SEAL  
8. 8S-4754 J [4] BOLT .875 in.(2.22 cm) diameter  
  8S-4755 [4] BOLT 1 in.(2.54 cm) diameter  
    (Use as Required)
9. 5P-3022 J [1] INSTALLER  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  3N-8049 [1] LOCTITE KIT (service)  
  H   NOT PART OF 3N8008 SEAL GROUP
  J   USE TO INSTALL WEAR SLEEVE
 

#UEG0634S0078
 

4W-2557: DAMPER GP

4W2557 DAMPER GROUP
Serial No. 68B7893-Up
Not For Use With Solid Ring Crankshaft Seal
For Locomotive Service. An Attachment
c318378 UEG0634S
4W2557 DAMPER GP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8245 [10] WASHER  
2. 4M-6953 [10] WASHER-HARD  
3. 0S-1587 [10] BOLT  
   
4. 2P-1793 [1] DAMPER AS  
5. 5M-9709 [2] PLUG-EXPANSION  
6. 3N-8785 [1] ADAPTER-DAMPER  
7. 0T-0603 [10] BOLT  
 

#UEG0634S0079
 

4W-2571: SEAL GP-CRANKSHAFT CONVERSION

4W2571 CRANKSHAFT CONVERSION SEAL GROUP-REAR-OPPOSITE ROTATION
Field Installation
c331741 UEG0634S
4W2571 SEAL GP-CRANKSHAFT CONVERSION Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2567 [1] ADAPTER-SEAL  
2. 5L-2093 [1] GASKET  
3. 4W-2606 [1] SEAL GP-CRANKSHAFT  
 

Information:

Engine News
New Filler Bands Give A Better Seal Between The Cylinder Liners And Cylinder Block
1979/05/23
New Cylinder Liner Has Improved Design To Keep Liner Temperatures Lower
1980/02/06
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Some Nuts Used On Main Bearing Caps Are Smaller Than Standard Size Across The Flat Sides
1980/08/13
6V3147 Main Bearing Wrench Now Available
1980/11/12
Correct Installation Of Inserts Necessary During Repairs To Prevent More Counterbore Cracks
1981/04/01
New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life
1981/04/22
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group
1982/02/10
New Liner Seat Insert With O-Ring Seal Available
1982/02/10
New Main Bearings And Connecting Rod Bearings Have Thicker Layer Of Surface Material
1982/02/24
Inspection Marks On Bearings
1982/05/12
Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Gasket Changed For Cylinder Block Side Cover
1984/05/16
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of 1W6265, 1W6266 And 1W6267 Insert For Cylinder Liner Seat{1217}
Installation Of 1W6265, 1W6266 And 1W6267 Insert For Cylinder Liner Seat{1217}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Specifications
Cylinder Liner
D399, G399, D398, G398, D379, G379 ENGINES
Cylinder Block
D399, G399, D398, G398, D379, G379 ENGINES
Cylinder Block
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Cylinder Liner
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Main Bearings
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Bearing Surface (Journal) For Main Bearings
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Disassembly and Assembly
Crankshaft Main Bearings
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Piston Cooling Tubes
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Cylinder Liners
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Cylinder Liner Has Improved Design To Keep Liner Temperatures Lower{1216}
1980/02/04
Some Nuts Used On Main Bearing Caps Are Smaller Than Standard Size Across The Flat Sides{1203}
1980/07/14
6V3147 Main Bearing Wrench Now Available{1203,0612}
1980/11/10
Correct Installation Of Inserts Necessary During Repairs To Prevent More Counterbore Cracks{1217,1201}
1981/03/09
New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life{1215,1213}
1981/04/06
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25
New Liner Seat Insert With O-Ring Seal Available{1217,1216}
1982/01/25
New Main Bearings And Connecting Rod Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/02/22
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Bolts Now Used Instead Of Studs To Hold Cylinder Heads{1101,1201}
1982/05/10
Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates{1217,1201,0664}
1982/07/05
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
New Gasket Prevents Leakage{1201,1362,1380}
1983/04/04
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Gasket Changed For Cylinder Block Side Cover{1201,1362}
1984/05/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Large Engine Blowby Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1988/06/20
Liner Seat Insert Now Available{1217}
1979/04/30
New Filler Bands Give A Better Seal Between The Cylinder Liners And Cylinder Block{1201,1216}
1979/05/14
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Caterpillar Parts SIS Catalog D379 :

CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CRANKSHAFT GP
4L-8791 CRANKSHAFT GP
CRANKSHAFT GP
4L-8791 CRANKSHAFT GP
CRANKSHAFT GP
4W-2574 CRANKSHAFT GP
CRANKSHAFT GROUP
3N-7968 CRANKSHAFT GROUP
CRANKSHAFT GROUP
3N-7968 CRANKSHAFT GROUP
DAMPER GROUP
3N-9587 DAMPER GROUP
SEAL GP-CRANKSHAFT CONVERSION
3N-8008 SEAL GP-CRANKSHAFT CONVERSION
DAMPER GP
4W-2557 DAMPER GP

Truck sale:

CATERPILLAR D379 1988
 
CATERPILLAR D379 1988
- STATIONARY - DIESEL
ZEPPELIN POWER SYSTEMS
Am Holzhafen 7 - Bremen -
CATERPILLAR D379 1988
 
CATERPILLAR D379 1988
- STATIONARY - DIESEL
ZEPPELIN POWER SYSTEMS
Am Holzhafen 7 - Bremen -
 
 
CAT D379

Jeff Martin Auctioneers
Stanton, Texas
1980 CAT D379
Call 
1980 CAT D379

Empire Power Systems
PHOENIX, Arizona
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.