AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N1589 SERVICE METER AND TACHOMETER DRIVE GROUP S.A.E. Standard Engine Rotation Serial No. 68B2614-Up. Also available as an Attachment with Serial No. 68B2540 to 68B2613 inclusive. 3N3886 Drive parts are shown on Page 107 D379


OPERATOR STATION
PANEL GP
FUEL SYSTEM
CONTROL GP-FUEL RATIO
TORQUE CONTROL GP
CONTROL GP-GOVERNOR

INDUSTRIAL ENGINE D379 INDUSTRIAL ENGINE 68B
 D379B ENGINE 68B02540-UP UEG0634S D379 68B   (1961)

OPERATOR STATION

PANEL GP
METER GP-SERVICE
2N-8376 METER GP-SERVICE
METER GP-SERVICE
2N-8375 METER GP-SERVICE
METER GP-SERVICE
3N-1589 METER GP-SERVICE
PANEL GP-INSTRUMENT
3N-2691 PANEL GP-INSTRUMENT
PANEL GP-INSTRUMENT
3N-2691 PANEL GP-INSTRUMENT
PANEL GP-INSTRUMENT
3N-2691 PANEL GP-INSTRUMENT
 

#UEG0634S0110
 

3N-1589: METER GP-SERVICE

3N1589 SERVICE METER AND TACHOMETER DRIVE GROUP
S.A.E. Standard Engine Rotation
Serial No. 68B2614-Up. Also available as an Attachment with Serial No. 68B2540
to 68B2613 inclusive. 3N3886 Drive parts are shown on Page 107
c229395 UEG0634S
3N1589 METER GP-SERVICE Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-5033 [4] BOLT  
2. 9S-0211 [4] CLAMP  
3. 4M-8303 [2] SEAL  
4. 2N-7423 [1] ADAPTER  
5. 2N-7425 [1] HOUSING ASSEM.  
6. 8M-1051 [1] SEAL  
7. 4L-8191 [1] GASKET  
8. 1A-2029 [4] BOLT  
9. 3B-4506 [4] LOCKWASHER  
10. 2N-7422 [1] ADAPTER  
11. 2A-0762 [4] BOLT  
12. 3N-3886 CY [1] DRIVE GROUP  
    (Separate Illustration)
13. 2N-8378 [1] METER ASSEM.  
14. 1H-3244 [4] LOCKWASHER  
15. 5F-0547 [2] WASHER  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  1P-4923 [1] KIT  
    (Consists of screws, window, & gasket)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0634S0111
 

3N-2691: PANEL GP-INSTRUMENT

INSTRUMENT PANEL (3N2691 N/S)--L.H. Mounted
Serial No. 68B2540 to 68B2603 inclusive
Refer also to Page 123 for special parts
c115131 UEG0634S
3N2691 PANEL GP-INSTRUMENT Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-0794 [3] RETAINER  
2. 2N-0821 [1] COVER  
3. 2M-0378 [1] HOSE ASSEM.  
4. 5K-9979 [2] CONNECTOR  
5. 0S-0509 [1] BOLT  
  2S-2176 [1] CLIP  
  3D-2023 [2] GROMMET  
6. 1D-4717 [3] NUT  
  3B-4506 [3] LOCKWASHER  
  4B-4278 [3] WASHER  
7. 6H-6699 [1] ADAPTER  
8. 4S-8385 H TUBE 44"  
9. 4B-8756 [6] NUT  
10. 5K-9242 [1] UNION  
11. 5K-9243 [2] ELBOW  
12. 4B-6029 [3] GROMMET  
13. 1H-3563 [2] CLAMP  
14. 1B-2790 [1] BOLT  
  1D-4716 [1] NUT  
  3B-4505 [1] LOCKWASHER  
  4B-4277 [2] WASHER  
15. 4B-0418 [2] CLIP  
16. 5B-0131 [1] GROMMET  
17. 4S-8385 H TUBE 39"  
18. 4S-8385 H TUBE 23"  
19. 4D-3828 [1] HOSE ASSEM.  
20. 3N-2215 [1] STRAP  
21. 1A-1460 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  9B-1006 [2] WASHER  
22. 2N-3988 [1] BRACKET ASSEM.  
23. 0L-2070 [2] BOLT  
24. 9F-6580 [3] BOLT  
  1B-4330 [3] NUT  
  3B-4504 [3] LOCKWASHER  
25. 3B-6769 [2] ELBOW  
26. 2N-5848 [1] BASE ASSEM.  
27. 2N-2413 [1] HEAT INDICATOR  
28. 4S-6574 [1] GAUGE (Fuel Pressure)  
29. 8L-3504 [1] GAUGE (Oil Pressure)  
30. 1L-6561 [1] PLUG  
31. 5S-7348 [2] SCREW  
  4B-2041 [2] NUT  
  9B-1117 [2] LOCKWASHER  
32. 2N-0816 [1] PANEL  
  H   ORDER BY THE FOOT
 

#UEG0634S0112
 

3N-2691: PANEL GP-INSTRUMENT

INSTRUMENT PANEL (3N2691 N/S)--L.H. Mounted
Serial No. 68B2604 to 68B2935 inclusive
Refer also to Page 123 for special parts
c141638 UEG0634S
3N2691 PANEL GP-INSTRUMENT Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-0794 [3] RETAINER  
2. 2N-0821 [1] COVER  
3. 2M-0378 [1] HOSE ASSEM.  
4. 5K-9979 [2] CONNECTOR  
5. 0S-0509 [2] BOLT  
  2S-2176 H [2] CLAMP (2.13 in. long)  
  3D-2023 [4] GROMMET  
6. 1D-4717 [4] NUT  
  3B-4506 C [4] LOCKWASHER  
  4B-4278 [4] WASHER  
7. 6H-6699 [1] ADAPTER  
8. 4S-8385 CH TUBE 44 in.  
9. 4B-8756 C [6] NUT  
10. 5K-9242 [1] UNION  
11. 5K-9243 C [1] ELBOW  
12. 4B-6029 C [2] GROMMET  
13. 6K-0344 C [1] CLAMP (1.74 in. long)  
14. 6L-3616 C [1] CONNECTOR  
15. 4B-0418 [3] CLIP  
16. 2N-0816 [1] PANEL  
17. 4S-8385 CH TUBE 39 in.  
18. 4S-8385 H TUBE 23 in.  
19. 4D-3828 [1] HOSE ASSEM.  
20. 3N-2215 [1] STRAP  
21. 1A-1460 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  9B-1006 [2] WASHER  
22. 2N-3988 [1] BRACKET ASSEM.  
23. 0L-2070 [2] BOLT  
24. 9F-6580 [3] BOLT  
  1B-4330 [3] NUT  
  3B-4504 [3] LOCKWASHER  
25. 3B-6769 [2] ELBOW  
26. 2N-5848 [1] BASE ASSEM.  
27. 2N-2413 [1] HEAT INDICATOR  
28. 4S-6574 [1] GAUGE (Fuel Pressure)  
29. 8L-3504 [1] GAUGE (Oil Pressure)  
30. 1L-6561 [1] PLUG  
31. 5S-7348 [2] SCREW  
  4B-2041 [2] NUT  
  9B-1117 [2] LOCKWASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE FOOT
 

#UEG0634S0113
 

3N-2691: PANEL GP-INSTRUMENT

3N2691 INSTRUMENT PANEL GROUP--L.H. Mounted
Serial No. 68B2936 to 68B4375 inclusive
Refer also to Page 123 for special parts
c147944 UEG0634S
3N2691 PANEL GP-INSTRUMENT Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-0794 [3] RETAINER  
2. 2N-0821 [1] COVER  
3. 3N-7239 C [1] HOSE ASSEM.  
4. 5K-9979 [2] CONNECTOR  
5. 0S-0509 [2] BOLT  
  2S-2176 H [2] CLAMP (2.13 in. long)  
  3D-2023 [4] GROMMET  
6. 1D-4717 [4] NUT  
  3B-4506 [4] LOCKWASHER  
  4B-4278 [4] WASHER  
7. 6H-6699 [1] ADAPTER  
8. 4S-8385 H TUBE 44 in.  
9. 4B-8756 [6] NUT  
10. 5K-9242 [1] UNION  
11. 5K-9243 [1] ELBOW  
12. 4B-6029 [2] GROMMET  
13. 6K-0344 [1] CLAMP (1.74 in. long)  
14. 6L-3616 [1] CONNECTOR  
15. 4B-0418 [3] CLIP  
16. 2N-0816 [1] PANEL  
17. 4S-8385 H TUBE 39 in.  
18. 4S-8385 H TUBE 23 in.  
19. 3N-7237 C [1] HOSE ASSEM.  
20. 3N-2215 [1] STRAP  
21. 1A-1460 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  9B-1006 [2] WASHER  
22. 2N-3988 [1] BRACKET ASSEM.  
23. 0L-2070 [2] BOLT  
24. 9F-6580 [3] BOLT  
  1B-4330 [3] NUT  
  3B-4504 [3] LOCKWASHER  
25. 3B-6769 [2] ELBOW  
26. 2N-5848 [1] BASE ASSEM.  
27. 2N-2413 [1] HEAT INDICATOR  
28. 4S-6574 [1] GAUGE (Fuel Pressure)  
29. 8L-3504 [1] GAUGE (Oil Pressure)  
30. 1L-6561 [1] PLUG  
31. 5S-7348 [2] SCREW  
  4B-2041 [2] NUT  
  9B-1117 [2] LOCKWASHER  
32. 8L-8413 C [4] STRAP  
33. 2B-2695 C [1] BOLT  
  1D-4716 [1] NUT  
  3B-4505 [1] LOCKWASHER  
  4B-4277 [1] WASHER  
34. 5K-5653 C [2] CLAMP  
  C   INDICATES CHANGE
  H   ORDER BY THE FOOT
 

#UEG0634S0114
 

3N-2691: PANEL GP-INSTRUMENT

3N2691 INSTRUMENT PANEL GROUP--L.H. Mounted
Serial No. 68B4376 to 68B7796 inclusive
Refer also to Page 123 for special parts
c166840 UEG0634S
3N2691 PANEL GP-INSTRUMENT Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-0794 [3] RETAINER  
2. 2N-0821 [1] COVER  
3. 3N-7239 [1] HOSE ASSEM.  
4. 5K-9979 [2] CONNECTOR  
5. 0S-0509 [2] BOLT  
  2S-2176 [2] CLAMP 5.41 cm(2.13 in.) long  
  3D-2023 [4] GROMMET  
6. 1D-4717 C [5] NUT  
  3B-4506 C [5] LOCKWASHER  
7. 6H-6699 [1] ADAPTER  
8. 5N-3756 C [1] TUBE ASSEM.  
9. 4B-8756 C [2] NUT  
10. 9S-7703 C [1] ELBOW  
11. 3L-1337 C [1] ELBOW  
12. 4B-6029 C [6] GROMMET  
13. 6K-0344 [1] CLAMP 4.41 cm(1.74 in.) long  
14. 6L-3616 [1] CONNECTOR  
15. 4B-0418 C [5] CLIP  
16. 2N-0816 [1] PANEL  
17. 5N-4174 C [1] TUBE ASSEM.  
18. 5P-1198 H TUBE 58.42 cm(23 in.)  
19. 3N-7237 [1] HOSE ASSEM.  
20. 3N-2215 [1] STRAP  
21. 1A-1460 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  9B-1006 [2] WASHER  
22. 2N-3988 [1] BRACKET ASSEM.  
23. 0L-2070 [2] BOLT  
24. 9F-6580 [3] BOLT  
  1B-4330 [3] NUT  
  3B-4504 [3] LOCKWASHER  
25. 3B-6769 [2] ELBOW  
26. 2N-5848 [1] BASE ASSEM.  
27. 2N-2413 [1] HEAT INDICATOR  
28. 4S-6574 [1] GAUGE (Fuel Pressure)  
29. 8L-3504 [1] GAUGE (Oil Pressure)  
30. 1L-6561 [1] PLUG  
31. 5S-7348 [2] SCREW  
  4B-2041 [2] NUT  
  9B-1117 [2] LOCKWASHER  
33. 0S-1594 C [1] BOLT  
  6B-0933 C [1] SPACER  
34. 2H-0435 C [2] CLAMP  
35. 5B-0131 C [1] GROMMET  
36. 4B-4278 [4] WASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0634S0115
 

3N-2691: PANEL GP-INSTRUMENT

3N2691 INSTRUMENT PANEL GROUP--L.H. Mounted
Serial No. 68B7797-Up
Refer also to Page 123 for special parts
c306077 UEG0634S
3N2691 PANEL GP-INSTRUMENT Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-0794 [3] RETAINER  
2. 2N-0821 [1] COVER  
3. 3N-7239 [1] HOSE ASSEM.  
4. 5K-9979 [2] CONNECTOR  
5. 0S-0509 [2] BOLT  
  2S-2176 [2] CLAMP 5.41 cm(2.13 in.) long  
  3D-2023 [4] GROMMET  
6. 1D-4717 [5] NUT  
  3B-4506 [5] LOCKWASHER  
7. 6H-6699 [1] ADAPTER  
8. 5N-3756 [1] TUBE ASSEM.  
9. 4B-8756 [2] NUT  
10. 9S-7703 [1] ELBOW  
11. 3L-1337 [1] ELBOW  
12. 4B-6029 [6] GROMMET  
13. 6K-0344 [1] CLAMP 4.41 cm(1.74 in.) long  
14. 6L-3616 [1] CONNECTOR  
15. 4B-0418 [5] CLIP  
16. 2N-0816 [1] PANEL  
17. 5N-4174 [1] TUBE ASSEM.  
18. 5P-1198 H TUBE 58.42 cm(23 in.)  
19. 3N-7237 [1] HOSE ASSEM.  
20. 3N-2215 [1] STRAP  
21. 1A-1460 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  9B-1006 [2] WASHER  
22. 2N-3988 [1] BRACKET ASSEM.  
23. 0L-2070 [2] BOLT  
24. 9F-6580 [3] BOLT  
  1B-4330 [3] NUT  
  3B-4504 [3] LOCKWASHER  
25. 3B-6769 [2] ELBOW  
26. 2N-5848 [1] BASE ASSEM.  
27. 1W-4303 C [1] HEAT INDICATOR  
28. 1W-5168 C [1] GAUGE (Fuel Pressure)  
29. 1W-5356 C [1] GAUGE (Oil Pressure)  
30. 1L-6561 [1] PLUG  
31. 5S-7348 [2] SCREW  
  4B-2041 [2] NUT  
  9B-1117 [2] LOCKWASHER  
33. 0S-1594 [1] BOLT  
  6B-0933 [1] SPACER  
34. 2H-0435 [2] CLAMP  
35. 5B-0131 [1] GROMMET  
36. 4B-4278 [4] WASHER  
37. 6V-3507 C [3] SEAL  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0634S0116
 

8S-6419: CONTROL GP-FUEL RATIO

8S6419 FUEL RATIO CONTROL GROUP--With Override
Serial No. 68B2540 to 68B4845 inclusive
c111246 UEG0634S
8S6419 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-2714 [3] BOLT  
2. 3S-4780 [1] COVER  
3. 3S-4818 [1] SPRING  
4. 3S-4819 [1] GASKET  
5. 6L-5766 [1] GASKET  
6. 6L-5768 [1] SPRING  
7. 6L-5769 [1] WASHER  
8. 6L-5767 [1] COVER  
9. 5S-6120 [1] RETAINER ASSEM.  
10. 6L-5773 [1] GASKET  
11. 6L-5772 [1] SPRING  
12. 8L-4183 [1] BOLT  
13. 3D-4603 [2] PLUG  
14. 5S-6458 [1] DOWEL  
15. 2M-5471 [1] BOLT  
16. 3S-4082 [1] PIN  
17. 1P-7963 [1] ARM  
18. 4F-7957 [2] BOLT  
19. 3S-4864 [2] SPACER  
20. 1B-2713 [1] BOLT  
21. 2M-2489 [1] SEAL  
22. 3S-4742 [1] SPRING  
23. 1B-4202 [1] NUT  
24. 3S-4741 [1] SCREW  
25. 8S-5447 [1] HOUSING ASSEM.  
  8S-5448 [1] BEARING  
    (Part of 8S5447 Housing Assem.)
26. 4S-7458 [1] DIAPHRAGM  
27. 6L-6035 [1] DOWEL  
  3S-4556 [1] LEVER ASSEM.  
28. 3S-4546 [1] LEVER  
29. 3S-4555 [1] SHAFT  
  3H-6660 [1] PIN  
30. 3S-4820 [1] PLUNGER  
31. 3S-4499 [1] HOUSING  
 

#UEG0634S0117
 

8S-6419: CONTROL GP-FUEL RATIO

8S6419 FUEL RATIO CONTROL GROUP--With Override
Serial No. 68B4846-Up
c303582 UEG0634S
8S6419 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1559 C [3] BOLT  
2. 3S-4780 [1] COVER  
3. 3S-4818 [1] SPRING  
4. 3S-4819 [1] GASKET  
5. 6L-5766 [1] GASKET  
6. 6N-3017 C [1] SPRING  
7. 6L-5769 [1] WASHER  
8. 6L-5767 [1] COVER  
9. 5S-6120 [1] RETAINER ASSEM.  
10. 6L-5773 [1] GASKET  
11. 6N-0968 C [1] SPRING  
12. 6N-2954 C [1] BOLT  
13. 3D-4603 [2] PLUG  
14. 5S-6458 [1] DOWEL  
15. 2M-5471 [1] BOLT  
16. 3S-4082 [1] PIN  
17. 1P-7963 [1] ARM  
18. 4F-7957 [2] BOLT  
19. 3S-4864 [2] SPACER  
20. 1B-2713 [1] BOLT  
21. 2M-2489 [1] SEAL  
22. 3S-4742 [1] SPRING  
23. 1B-4202 [1] NUT  
24. 3S-4741 [1] SCREW  
25. 6N-1603 C [1] HOUSING ASSEM.  
26. 4S-7458 [1] DIAPHRAGM  
27. 6L-6035 [1] DOWEL  
28. 3S-4556 [1] LEVER ASSEM.  
    (Includes)
  3S-4546 [1] LEVER  
29. 3S-4555 [1] SHAFT  
  3H-6660 [1] PIN  
30. 3S-4820 [1] PLUNGER  
31. 3S-4499 [1] HOUSING  
32. 9M-1974 C [1] WASHER  
  C   INDICATES CHANGE
 

#UEG0634S0118
 

2S-9519: STOP GP-RACK

2S9519 RACK STOP GROUP--Type 1
Part of 8L5814 and 3N4078 Governor Groups shown on Pages 39, 40B & 40C-2
c114355 UEG0634S
2S9519 STOP GP-RACK Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 9M-6292 [1] LOCK  
3. 8S-4317 [1] CONTACT  
4. 2S-7391 [1] BAR  
5. 8M-9062 [1] RETAINER  
6. 2S-7390 C [2] SPACER  
7. 3S-0602 [1] RETAINER  
8. 1P-6452 [1] INSULATOR  
  C   INDICATES CHANGE
 

#UEG0634S0119
 

7L-0535: CONTROL GP-GOVERNOR

7L535 GOVERNOR CONTROL GROUP
Serial No. 68B2540 to 68B2870 inclusive
c105040 UEG0634S
7L0535 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [4] BOLT  
2. [4] LOCKWASHER  
3. [4] WASHER  
4. [1] WASHER  
5. [2] BEARING  
6. [4] BOLT  
7. [4] LOCKWASHER  
8. [4] WASHER  
9. [1] CHANNEL ASSEM.  
10. [4] SPACER  
11. [1] SHAFT  
12. [2] BOLT  
13. [2] NUT  
14. [2] LOCKWASHER  
15. [2] SCREW  
16. [1] ROD  
17. [2] ROD END  
18. [2] NUT  
19. [2] LEVER  
 

Information:

Engine News
Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed
1979/01/10
Digital Tachometer Available
1983/08/17
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed
1987/05/01
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
New Digital Tachometers Available As Attachments
1990/07/01
Tachometer Drive Shaft Rotation
1993/08/01
A New Service Support Center Is Available For The Products That Are Assembled At The Large Engine Center {1000, 4490, 7002, 7274}
2001/09/01
Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
2001/10/01
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of Electric (Digital) Tachometer Groups{7462}
Installation Of Electric (Digital) Tachometer Groups{7462}
Installation Of 7W4426 Tachometer Conversion Kit{7462}
Installation Of 7W4426 Tachometer Conversion Kit{7462}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Service Meter
D399, G399, D398, G398, D379, G379 ENGINES
Service Meter And Tachometer Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Mechanical Gauges
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Gauges For Engine Oil Pressure
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Gauges For Gear Oil Pressure
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Gauges For Water Temperature
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Sending Unit For Water Temperature
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Sending Units For Oil Pressure
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Electric Tachometer
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Normal Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine/Generator Programming OP5
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Hourmeter Programming OP7
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Component Location
Electronic Modular Control Panel II (EMCP II) For MUI Engines
EMCP Electronic Control (Generator Set)
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AC Offset Adjustment OP10
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Relay Driver Module
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Alarm Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Shutdown Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Log Viewing OP1
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine/Generator Setpoint Viewing OP2
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Password Entry OP3
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Log Clearing OP4
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Voltmeter/Ammeter Programming OP8
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Modes Of Operation
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Diagnostic Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Data Link
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Description
Electronic Modular Control Panel II (EMCP II) For MUI Engines
General Information
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Instrument Panel
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Spare Input/Output Programming OP6
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine Setpoint Verification OP9
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AL Fault Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
SP Fault Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Letter-APD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Testing and Adjusting
Indicator for Engine Overspeed - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Troubleshooting Undiagnosed Problems
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Zero Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AC Voltage Range - Adjust
Electronic Modular Control Panel II (EMCP II) For MUI Engines
EMCP Electronic Control (Generator Set) - Replace
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Relay Module - Replace
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 268 FMI 2 EMCP Electronic Control (Generator Set) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 442 FMI 12 Generator Fault Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 500 FMI 12 EMCP Electronic Control (Generator Set) Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Block Diagram of Generator Set Control
Electronic Modular Control Panel II (EMCP II) For MUI Engines
General Information
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Connector Contact Identification of Generator Set Control
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Identification
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AL Fault Code - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Troubleshooting Dedicated Shutdown Indicators
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Low Oil Pressure - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for High Water Temperature - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Low Coolant Level - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Record
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Troubleshooting Diagnostic Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 248 FMI 9 CAT Data Link Abnormal Update - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 330 FMI 7 Unexpected Shutdown Improper Mechanical Response - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 566 FMI 7 Unexpected Shutdown Improper Mechanical Response - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 331 FMI 2 Switch (Engine Control) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 336 FMI 2 Switch (Engine Control) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 334 FMI 3 Spare Output Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 334 FMI 4 Spare Output Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 443 FMI 12 Crank Termination Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 444 FMI 12 Starting Motor Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 445 FMI 12 Run Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 446 FMI 12 Air Shutoff Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 447 FMI 12 Fuel Control Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 560 FMI 11 CAT Data Link Failure Mode Not Identified - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
SP Fault Code - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Emergency Stop - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Overcrank - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
No Engine Shutdown - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Erratic GSC Operation - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Inaccurate Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 441 FMI 12 Electronic Governor Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Symbols
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Typical Generator Abbreviations
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Disassembly and Assembly
Service Meter And Tachometer Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Installation Procedures For 5N5880 Remote Shut-Off Group And 5N6336 Oil Pressure Indicator Gauge Group{7418,7403,7455}
1980/01/28
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
New Oil Pressure Gauge Group Used{7418}
1983/06/06
Digital Tachometer Available{7462}
1983/08/15
Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge{1318,1306}
1984/02/13
Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge{1306,1318}
1984/09/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New &quot;Two Inch&quot; Gauges, Indicator And Senders Available{7450}
1986/06/02
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
New Digital Tachometers Available As Attachments{7462}
1990/06/18
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Tachometer Drive Shaft Rotation{1085}
1993/08/09
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20

Caterpillar Parts SIS Catalog D379 :

METER GP-SERVICE
2N-8375 METER GP-SERVICE
METER GP-SERVICE
2N-8376 METER GP-SERVICE
DRIVE GP-FRONT ACCESSORY
6L-7971 DRIVE GP-FRONT ACCESSORY
DRIVE GP-FRONT ACCESSORY
6L-7971 DRIVE GP-FRONT ACCESSORY
DRIVE GP-FRONT ACCESSORY
6L-7971 DRIVE GP-FRONT ACCESSORY
DRIVE GP-FRONT ACCESSORY
6L-7971 DRIVE GP-FRONT ACCESSORY
DRIVE GP-FRONT ACCESSORY
6L-7971 DRIVE GP-FRONT ACCESSORY
DRIVE GP-FRONT ACCESSORY
6L-7971 DRIVE GP-FRONT ACCESSORY
PANEL GP-INSTRUMENT
3N-2691 PANEL GP-INSTRUMENT
PANEL GP-INSTRUMENT
3N-2691 PANEL GP-INSTRUMENT
PANEL GP-INSTRUMENT
3N-2691 PANEL GP-INSTRUMENT
PANEL GP-INSTRUMENT
3N-2691 PANEL GP-INSTRUMENT
PANEL GP-INSTRUMENT
3N-2691 PANEL GP-INSTRUMENT
CONTROL GP-FUEL RATIO
8S-6419 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
8S-6419 CONTROL GP-FUEL RATIO
STOP GP-RACK
2S-9519 STOP GP-RACK

Truck sale:

CATERPILLAR D379 1988
 
CATERPILLAR D379 1988
- STATIONARY - DIESEL
ZEPPELIN POWER SYSTEMS
Am Holzhafen 7 - Bremen -
CATERPILLAR D379 1988
 
CATERPILLAR D379 1988
- STATIONARY - DIESEL
ZEPPELIN POWER SYSTEMS
Am Holzhafen 7 - Bremen -
 
 
CAT D379

Jeff Martin Auctioneers
Stanton, Texas
1980 CAT D379
Call 
1980 CAT D379

Empire Power Systems
PHOENIX, Arizona
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.