910 WHEEL LOADER 80U00001-06734 (MACHINE) WORK TOOLS Caterpillar SIS

COMPACT WHEEL LOADER 910 COMPACT WHEEL LOADER 80U
910 WHEEL LOADER 80U00001-06734 (MACHINE) UEG0636S 910 80U (1974)

Parts group 910:

For full view, you need register

WORK TOOLS

BUCKET GP

6S8672 GENERAL PURPOSE BUCKET ASSEMBLY--.9 Cubic Meters (1.18 Cubic Yards)--2152 mm (84.72") Wide
FOR JAPAN MARKET ONLY
Part of 6S8700 High Lift Loader Arrangement listed on Page 88A

6S-8657 GENERAL PURPOSE BUCKET ASSEMBLY

6S8657 GENERAL PURPOSE BUCKET ASSEMBLY--1.25 Cubic Yard--84.50" Wide
AN ATTACHMENT

6S-6504 GENERAL PURPOSE BUCKET ASSEMBLY

6S6504 GENERAL PURPOSE BUCKET ASSEMBLY--1.25 Cubic Yard--84.50" Wide
Only separate parts serviced. When complete Assembly is required order 6S8657 shown on Page 89B
AN ATTACHMENT

6S-4521 BUCKET AR-MULTI-PURPOSE

6S4521 MULTI-PURPOSE BUCKET ARRANGEMENT
AN ATTACHMENT

6S-4852 BUCKET GP-MULTI-PURPOSE

6S4852 MULTI-PURPOSE BUCKET GROUP--.76 Cubic Meters (1 Cubic Yards)--2057 mm (81") Wide
Part of 6S4521 Multi-Purpose Bucket Arrangement listed on Page 91
AN ATTACHMENT

GROUND ENGAGING TOOLS (G.E.T.)

8J-7543 LOADER TOOTH GROUP

8J7543 LOADER TOOTH GROUP--2" Wide
FOR USE WITH 6S4521 MULTI-PURPOSE BUCKET ARRANGEMENT LISTED
ON PAGE 91. AN ATTACHMENT

6S-8557 CUTTING EDGE GROUP

6S8557 CUTTING EDGE GROUP--Bolt-On
FOR USE WITH 1.25 CU. YD. GENERAL PURPOSE BUCKET
AN ATTACHMENT

9J-0613 TOOTH GP-LOADER

9J613 LOADER TOOTH GROUP--Bolt-On
FOR USE WITH 6S4521 BUCKET ARRANGEMENT LISTED ON
PAGE 91. AN ATTACHMENT

9J-4208 TOOTH GP

9J4208 TOOTH GROUP
AN ATTACHMENT

Information:

(For parts list, see above)

WORK TOOLS

BLADE GP

Service Magazine

Moldboard Repair Plates Are Adaptable To Current Machines{6151}
1979/12/10

BUCKET GP

Special Instruction

Installation Of Multi-Purpose Bucket And Three Valve Hydraulic Controls{5050, 6104}
Installation Of Multi-Purpose Bucket And Three Valve Hydraulic Controls{5050, 6104}

Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Installation Of Bucket Hinge Pin Bearing Bosses{6119}

Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}

Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}

Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}

Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}

Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}

Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat^® Advansys Tips {0751, 6001, 6800, 6805}

Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat^® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}

Tool Operating Manual

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}

Disassembly and Assembly

Bucket
910 WHEEL LOADER VEHICLE SYSTEMS

Service Magazine

Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30

Revised Special Instruction, SEHS8433-04, "Repair Of Wheel And Track Loader Lift Arms And Levers" Available {0374,6107,6116,6119}
1998/12/07

Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
2011/02/24

COUPLER GP-QUICK

Reuse And Salvage Guidelines

Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}

FELLER BUNCHER AR

Service Magazine

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

GROUND ENGAGING TOOLS (G.E.T.)

Special Instruction

Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}

Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}

Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}

Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System

Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}

398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}

Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat^® Advansys Tips {0751, 6001, 6800, 6805}

Tool Operating Manual

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Reuse And Salvage Guidelines

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Service Magazine

Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30

Procedure To Install Weld-On Half Arrow Cutting Edges{6800,6801,6805}
1984/10/08

The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23

Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16

Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01

Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

WINCH GP

Special Instruction

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

TOOLS

Tool Operating Manual

Service Magazine

Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16

PIN GP

Reuse And Salvage Guidelines

Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}

COLLECTOR AR-TREE

Service Magazine

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

89,603

Caterpillar 910M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.

120,000

Caterpillar 910M, Wheel Loaders, Construction
- Wheel Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

70,597

Caterpillar 910M, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.

3,425

Caterpillar 910-918, SNOW PUSHER, 144, IT, snow removal, Agriculture
- snow removal
ZIEGLER CAT

3,425

Caterpillar 910-918, SNOW PUSHER, 144, IT, snow removal, Agriculture
- snow removal
ZIEGLER CAT

910 WHEEL LOADER 80U00001-06734 (MACHINE) WORK TOOLS Caterpillar SIS

Parts group 910:

Information:

Truck sale:

Modal