6S8557 CUTTING EDGE GROUP--Bolt-On FOR USE WITH 1.25 CU. YD. GENERAL PURPOSE BUCKET AN ATTACHMENT 910

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

0. 6S-8557 CUTTING ED
1. 9J-0613 TOOTH GP-L
2. 9J-4208 TOOTH GP

IMPLEMENTS

LOADER AR

3. 3Y-6714 TRANSPORT

WORK TOOLS

BUCKET GP

4. FOR JAPAN MARKET ONLY
Part of 6S8700 High Lift Loader Arrangement listed on Page 88A" class=""> 6S-8672 BUCKET AS-
5. AN ATTACHMENT" class=""> 6S-8657 GENERAL PU
6. Only separate parts serviced. When complete Assembly is required order 6S8657 shown on Page 89B
AN ATTACHMENT" class=""> 6S-6504 GENERAL PU
7. 6S-4521 BUCKET AR-

HYDRAULIC SYSTEM

CYLINDER GP

8. 6S-5905 MOUNTING G
9. Part of 6S4521 Multi-Purpose Bucket Arrangement listed on Page 91
AN ATTACHMENT" class=""> 8J-5391 CYLINDER G
0. INFORMATION

COMPACT WHEEL LOADER 910 COMPACT WHEEL LOADER 80U
910 WHEEL LOADER 80U00001-06734 (MACHINE) UEG0636S 910 80U (1974)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

8J-7543 LOADER TOOTH GROUP

6S-8557 CUTTING EDGE GROUP

9J-0613 TOOTH GP-LOADER

9J-4208 TOOTH GP

#UEG0636S0210

6S-8557: CUTTING EDGE GROUP

CUTTING EDGE GROUP

6S8557 CUTTING EDGE GROUP--Bolt-On
FOR USE WITH 1.25 CU. YD. GENERAL PURPOSE BUCKET
AN ATTACHMENT

c148085 UEG0636S

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6S-8570	[2]	PLATE
2.	9J-3265	[2]	CUTTING EDGE (end)
3.	4F-7827	[7]	BOLT
	2J-3506	[7]	NUT
	2S-0115	[7]	WASHER
4.	9J-1654	[1]	CUTTING EDGE (center)

#UEG0636S0211

9J-0613: TOOTH GP-LOADER

TOOTH GP-LOADER

9J613 LOADER TOOTH GROUP--Bolt-On
FOR USE WITH 6S4521 BUCKET ARRANGEMENT LISTED ON
PAGE 91. AN ATTACHMENT

c148883 UEG0636S

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5J-4771	[2]	BOLT
2.	2J-3506	[2]	NUT
3.	8J-6207	[1]	TOOTH

#UEG0636S0212

9J-4208: TOOTH GP

TOOTH GP

9J4208 TOOTH GROUP
AN ATTACHMENT

c167185 UEG0636S

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2J-3506	[2]	NUT
2.	9J-4207	[1]	ADAPTER
3.	8J-6208	[1]	PIN
	9J-4209	[1]	RETAINER
4.	9J-4203	[1]	TIP 14.4 cm(5.67 in.) long
			-OR-
	8J-6201 H	[1]	TIP 13.34 cm(5.25 in.) long
			-OR-
	8J-6202 H	[1]	TIP 14.5 cm(5.71 in.) long
5.	5J-4771	[2]	BOLT
	H		NOT PART OF 9J4208 TOOTH GROUP

#UEG0636S0213

3Y-6714: TRANSPORT BRACKET GROUP

TRANSPORT BRACKET GROUP

3Y6714 TRANSPORT BRACKET GROUP
FOR JAPAN MARKET ONLY
Part of 6S8700 High Lift Loader Arrangement listed on Page 88A

c176038 UEG0636S

3Y6714 TRANSPORT BRACKET GROUP Parts scheme

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2D-3135	[1]	U-BOLT
2.	1D-4719	[2]	NUT
3.	3Y-6715	[1]	BRACE ASSEM.
4.	3B-4508	[2]	LOCKWASHER
			-OR-
	5P-8245 C	[2]	WASHER
	3Y-1585 H	[1]	FILM (caution)
	C		INDICATES CHANGE
	H		NOT SHOWN-MOUNTED ON R.H. SIDE OF BRACKET ASSEM.

#UEG0636S0214

6S-8672: BUCKET AS-GENERAL PURPOSE

BUCKET AS-GENERAL PURPOSE

6S8672 GENERAL PURPOSE BUCKET ASSEMBLY--.9 Cubic Meters (1.18 Cubic Yards)--2152 mm (84.72") Wide
FOR JAPAN MARKET ONLY
Part of 6S8700 High Lift Loader Arrangement listed on Page 88A

c217355 UEG0636S

6S8672 BUCKET AS-GENERAL PURPOSE Parts scheme

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6S-3232	[1]	HINGE ASSEM. (L.H. -Outer)
2.	2K-4163	[1]	BOSS
3.	6S-3221	[1]	BOSS
4.	6S-3234	[1]	HINGE ASSEM. (L.H. -Inner)
5.	6S-3221	[1]	BOSS
6.	1F-0748	[1]	NUT
7.	2K-7439	[1]	BOSS
8.	6S-3233	[1]	HINGE ASSEM. (R.H. -Inner)
9.	2K-7439	[1]	BOSS
10.	1F-0748	[1]	NUT
11.	6S-3221	[1]	BOSS
12.	6S-3231	[1]	HINGE ASSEM. (R.H. -Outer)
13.	6S-3221	[1]	BOSS
14.	2K-4163	[1]	BOSS
15.		[1]	BAR (R.H.)
		[1]	BAR (L.H.)
16.	6S-3238	[1]	PLATE (R.H.)
	6S-3237	[1]	PLATE (L.H.)
17.	6S-6500	[1]	CUTTING EDGE
18.	6S-3298	[4]	BAR

#UEG0636S0215

6S-8657: GENERAL PURPOSE BUCKET ASSEMBLY

GENERAL PURPOSE BUCKET ASSEMBLY

6S8657 GENERAL PURPOSE BUCKET ASSEMBLY--1.25 Cubic Yard--84.50" Wide
AN ATTACHMENT

c151629 UEG0636S

6S8657 GENERAL PURPOSE BUCKET ASSEMBLY Parts scheme

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6S-8599	[1]	BAR (R.H.)
	6S-8602	[1]	BAR (L.H.)
2.	6S-3238	[1]	PLATE (R.H.)
	6S-3237	[1]	PLATE (L.H.)
3.	6S-6500	[1]	EDGE
4.	6S-3298	[4]	BAR
5.	6S-3231	[1]	HINGE ASSEM. (R.H. Outer)
			(Includes)
6.	6S-3221	[1]	BOSS
7.	2K-4163	[1]	BOSS
8.	6S-3233	[1]	HINGE ASSEM. (R.H. Inner)
			(Includes)
9.	6S-3221	[1]	BOSS
10.	1F-0748	[1]	NUT
11.	6S-3234	[1]	HINGE ASSEM. (L.H. Inner)
			(Includes)
12.	6S-3221	[1]	BOSS
13.	1F-0748	[1]	NUT
14.	6S-3232	[1]	HINGE ASSEM. (L.H. Outer)
			(Includes)
15.	6S-3221	[1]	BOSS
16.	2K-4163	[1]	BOSS

#UEG0636S0216

6S-6504: GENERAL PURPOSE BUCKET ASSEMBLY

GENERAL PURPOSE BUCKET ASSEMBLY

6S6504 GENERAL PURPOSE BUCKET ASSEMBLY--1.25 Cubic Yard--84.50" Wide
Only separate parts serviced. When complete Assembly is required order 6S8657 shown on Page 89B
AN ATTACHMENT

c116461 UEG0636S

6S6504 GENERAL PURPOSE BUCKET ASSEMBLY Parts scheme

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Qty	Parts name
1.	[1]	BAR (R.H.)
	[1]	BAR (L.H.)
2.	[1]	PLATE (R.H.)
	[1]	PLATE (L.H.)
3.	[1]	EDGE
4.	[2]	PLATE
5.	[1]	HINGE ASSEM. (R.H. -Outer)
6.	[1]	BOSS
7.	[1]	BOSS
8.	[1]	HINGE ASSEM. (R.H. -Inner)
9.	[1]	BOSS
10.	[1]	NUT
11.	[1]	HINGE ASSEM. (L.H. -Inner)
12.	[1]	BOSS
13.	[1]	NUT
14.	[1]	HINGE ASSEM. (L.H. -Outer)
15.	[1]	BOSS
16.	[1]	BOSS
17.	[2]	PLATE
18.	[4]	BAR

#UEG0636S0217

6S-4521: BUCKET AR-MULTI-PURPOSE

BUCKET AR-MULTI-PURPOSE

6S4521 MULTI-PURPOSE BUCKET ARRANGEMENT
AN ATTACHMENT

UEG0636S0217 UEG0636S

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8J-5391 Y	[2]	CYLINDER GROUP
6S-4781 Y	[1]	HYDRAULIC LINES GROUP
6S-4852 Y	[1]	MULTI-PURPOSE BUCKET GROUP
6S-5905 Y	[1]	CYLINDER MOUNTING GROUP
Y		SEPARATE ILLUSTRATION

#UEG0636S0218

6S-5905: MOUNTING GP-CYLINDER

MOUNTING GP-CYLINDER

6S5905 CYLINDER MOUNTING GROUP
Part of 6S4521 Multi-Purpose Bucket Arrangement

c116465 UEG0636S

6S5905 MOUNTING GP-CYLINDER Parts scheme

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[4]	FITTING
2.	6S-4785	[2]	PIN
3.	2K-0703	[2]	BAR
4.	2H-3855	[4]	BOLT
5.	3B-4508	[6]	LOCKWASHER
6.	6S-5906	[2]	PIN
7.	0S-1573	[2]	BOLT
	1D-4719	[2]	NUT

#UEG0636S0219

8J-5391: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

8J5391 CYLINDER GROUP--3.50" Bore x 8.60" Stroke
Part of 6S4521 Multi-Purpose Bucket Arrangement listed on Page 91
AN ATTACHMENT

c116462 UEG0636S

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Qty	Parts name
1.	[1]	BOLT
2.	[1]	WASHER
3.	[1]	RING
4.	[1]	SEAL ASSEM.
5.	[1]	PISTON
6.	[1]	CYLINDER ASSEM.
7.	[1]	BEARING
8.	[1]	SEAL
9.	[1]	RING
10.	[1]	SEAL
11.	[1]	SEAL
12.	[1]	CROWN
13.	[1]	ROD ASSEM.
14.	[1]	BEARING
15.	[1]	SEAL
16.	[1]	SCREW
17.	[1]	HEAD

Information:

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

Special Instruction

Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}

Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}

Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}

Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System

Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}

Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}

398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}

Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}

Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat^® Advansys Tips {0751, 6001, 6800, 6805}

Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat^® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}

Tool Operating Manual

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Reuse And Salvage Guidelines

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Service Magazine

Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30

Procedure To Install Weld-On Half Arrow Cutting Edges{6800,6801,6805}
1984/10/08

The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23

Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16

Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01

Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Caterpillar Parts SIS Catalog 910 :

8J-7543 LOADER TOOTH GROUP

6S-3547 BUCKET INDICATOR GROUP

6S-9147 BUCKET INDICATOR GROUP

9J-7905 CYLINDER GP-TILT

6S-8671 CONTROL GP-BUCKET

6S-8954 COUNTERWEIGHT GROUP

6S-8700 HIGH LIFT LOADER ARRANGEMENT

6S-3546 BUCKET CONTROL GROUP

9J-0613 TOOTH GP-LOADER

9J-4208 TOOTH GP

3Y-6714 TRANSPORT BRACKET GROUP

6S-8672 BUCKET AS-GENERAL PURPOSE

6S-8657 GENERAL PURPOSE BUCKET ASSEMBLY

6S-6504 GENERAL PURPOSE BUCKET ASSEMBLY

6S-4521 BUCKET AR-MULTI-PURPOSE

6S-5905 MOUNTING GP-CYLINDER

Truck sale:

89,603

Caterpillar 910M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.

120,000

Caterpillar 910M, Wheel Loaders, Construction
- Wheel Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

70,597

Caterpillar 910M, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.

3,425

Caterpillar 910-918, SNOW PUSHER, 144, IT, snow removal, Agriculture
- snow removal
ZIEGLER CAT

3,425

Caterpillar 910-918, SNOW PUSHER, 144, IT, snow removal, Agriculture
- snow removal
ZIEGLER CAT