AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N4078 GOVERNOR GROUP--Part 3 of 3 Serial No. 35B6683-Up D399 INDUSTRIAL ENGINE


FUEL SYSTEM
GOVERNOR GP
CONTROL GP-GOVERNOR
TORQUE CONTROL GP
CONTROL GP-GOVERNOR
TORQUE CONTROL GP
CONTROL GP-FUEL RATIO
OPERATOR STATION
PANEL GP

INDUSTRIAL ENGINE D399 INDUSTRIAL ENGINE 35B
 D399 INDUSTRIAL ENGINE 35B00688-UP UEG0637S D399 35B   (1967)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
COVER GP-GOVERNOR
3N-2976 COVER GP-GOVERNOR
GOVERNOR ACTUATOR GROUP
8L-8152 GOVERNOR ACTUATOR GROUP
GOVERNOR ACTUATOR GROUP
8L-8152 GOVERNOR ACTUATOR GROUP
 

#UEG0637S0140
 

3N-4078: GOVERNOR GP

3N4078 GOVERNOR GROUP--Part 3 of 3
Serial No. 35B6683-Up
c308956 UEG0637S
3N4078 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4063 [1] LEVER ASSEM.  
  9S-4466 [1] LEVER ASSEM.  
  5H-1351 [1] PIN  
2. 9M-9788 [1] PLUNGER  
3. 4L-9971 [1] SPRING  
4. 9S-4468 [1] BOLT  
  2F-4159 [1] LOCK  
5. 6N-8629 [1] SEAT  
6. 4N-6681 [1] SPRING  
7. 9M-6303 [1] SPRING  
8. 4N-3887 [1] RING  
9. 1W-1132 C [1] WEIGHT ASSEM.  
10. 1S-5440 [2] DOWEL  
11. 2N-0477 [2] WEIGHT  
12. 9S-4673 [1] BAND ASSEM.  
13. 9F-6580 [2] BOLT  
  7F-2836 [2] LOCK  
14. 7L-8748 [1] COVER  
15. 6L-8027 [1] SHAFT  
  5M-6228 [2] BEARING  
16. 7L-8669 [1] LEVER  
17. 7L-0280 [1] PIN ASSEM.  
18. 7H-3639 [2] PIN  
19. 8S-7499 [1] PIN  
20. 7B-8105 [1] RING  
21. 2A-5546 [3] BOLT  
  9M-6293 [1] LOCK  
22. 2P-8725 [1] PISTON ASSEM.  
  1S-4741 [1] CYLINDER  
23. 7S-8447 [1] PISTON ASSEM.  
24. 7L-8777 [1] SLEEVE  
25. 8M-8997 [1] SEAL  
26. 7M-7219 [1] BEARING  
  7M-7193 [2] RACE  
27. 2P-8630 [1] DOWEL  
28. 2S-0007 [1] SLEEVE  
29. 9M-6302 [2] WASHER  
30. 6N-3504 [1] SEAT  
31. 8H-9181 [1] SPRING  
32. 8L-6206 [1] PLATE  
  8L-6207 [1] GASKET  
33. 2B-2695 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
34. 2N-3221 [1] GEAR (13 TEETH)  
35. 2N-0828 [2] WASHER  
  2P-9556 [1] SPACER  
36. 3K-0810 [1] RING  
  C   INDICATES CHANGE
 

#UEG0637S0141
 

8L-5395: CONTROL GP-GOVERNOR

8L5395 GOVERNOR CONTROL GROUP
Serial No. 35B688 to 35B1013 inclusive
Refer also to Pages 130, 131, 132 and 133 for special parts
c125265 UEG0637S
8L5395 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] CHANNEL ASSEM.  
2. [2] WASHER  
3. [2] BEARING  
4. [4] BOLT  
  [4] LOCKWASHER  
  [4] WASHER  
5. [4] BOLT  
  [4] LOCKWASHER  
  [4] WASHER  
6. [1] SHAFT  
7. [2] ROD END  
8. [2] SCREW  
9. [2] NUT  
10. [1] ROD  
11. [2] BOLT  
  [2] NUT  
  [2] LOCKWASHER  
12. [2] LEVER  
 

#UEG0637S0142
 

2S-9519: STOP GP-RACK

2S9519 RACK STOP GROUP--Type 1
Part of 8L5814 and 3N4078 Governor Groups shown on Pages 37, 38C-2 and 38B
c114355 UEG0637S
2S9519 STOP GP-RACK Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 9M-6292 [1] LOCK  
3. 8S-4317 [1] CONTACT  
4. 2S-7391 [1] BAR  
5. 8M-9062 [1] RETAINER  
6. 2S-7390 C [2] SPACER  
7. 3S-0602 [1] RETAINER  
8. 1P-6452 [1] INSULATOR  
  C   INDICATES CHANGE
 

#UEG0637S0143
 

8L-5395: CONTROL GP-GOVERNOR

8L5395 GOVERNOR CONTROL GROUP
Serial No. 35B1014-Up
Refer also to Pages 130, 131, 132 and 133 for special parts
c147031 UEG0637S
8L5395 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4318 [1] CHANNEL ASSEM.  
2. 1D-0511 [2] WASHER  
3. 6L-7752 [2] BEARING  
4. 5M-6755 [4] BOLT  
  3B-4502 [4] LOCKWASHER  
  4B-4274 [4] WASHER  
5. 1D-4538 [4] BOLT (2.25 in. long)  
  3B-4505 [4] LOCKWASHER  
  4B-5270 [4] WASHER  
    (Used with Water Shielded Manifolds Only)
6. 8L-4320 [1] SHAFT  
7. 7L-4186 [2] ROD END  
8. 1M-1254 C [2] BOLT  
9. 1A-8285 [2] NUT  
10. 6L-9665 [1] ROD  
11. 0S-1616 [2] BOLT  
  1B-4330 [2] NUT  
  3B-4504 [2] LOCKWASHER  
12. 3N-4892 C [2] LEVER  
13. 1F-5842 C [4] BOLT (3.25 in. long)  
  1F-2280 [4] SPACER  
    (Used With Watercooled Manifolds Only)
  C   INDICATES CHANGE
 

#UEG0637S0144
 

2S-9519: STOP GP-RACK

2S9519 RACK STOP GROUP--Type 2
Part of 8L5814 and 3N4078 Governor Groups shown
on Pages 37, 38B and 38C-2
c214902 UEG0637S
2S9519 STOP GP-RACK Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 9M-6292 [1] LOCK  
3. 8M-9062 [1] RETAINER  
4. 1P-6452 [1] INSULATOR  
5. 3S-0602 [1] RETAINER  
6. 2S-7391 [1] BAR  
7. 1P-9958 C [1] INSULATOR  
8. 9L-7235 C [1] SHIM .991 m(.039 in.)thick  
9. 8S-4317 [1] CONTACT  
  C   INDICATES CHANGE
 

#UEG0637S0145
 

8S-6419: CONTROL GP-FUEL RATIO

8S6419 FUEL RATIO CONTROL GROUP--With Override
Serial No. 35B688 to 35B3180 inclusive
c111246 UEG0637S
8S6419 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-2714 [3] BOLT  
2. 3S-4780 [1] COVER  
3. 3S-4818 [1] SPRING  
4. 3S-4819 [1] GASKET  
5. 6L-5766 [1] GASKET  
6. 6L-5768 [1] SPRING  
7. 6L-5769 [1] WASHER  
8. 6L-5767 [1] COVER  
9. 5S-6120 [1] RETAINER ASSEM.  
10. 6L-5773 [1] GASKET  
11. 6L-5772 [1] SPRING  
12. 8L-4183 [1] BOLT  
13. 3D-4603 [2] PLUG  
14. 5S-6458 [1] DOWEL  
15. 2M-5471 [1] BOLT  
16. 3S-4082 [1] PIN  
17. 1P-7963 [1] ARM  
18. 4F-7957 [2] BOLT  
19. 3S-4864 [2] SPACER  
20. 1B-2713 [1] BOLT  
21. 2M-2489 [1] SEAL  
22. 3S-4742 [1] SPRING  
23. 1B-4202 [1] NUT  
24. 3S-4741 [1] SCREW  
25. 8S-5447 [1] HOUSING ASSEM.  
  8S-5448 [1] BEARING  
    (Part of 8S5447 Housing Assem.)
26. 4S-7458 [1] DIAPHRAGM  
27. 6L-6035 [1] DOWEL  
  3S-4556 [1] LEVER ASSEM.  
28. 3S-4546 [1] LEVER  
29. 3S-4555 [1] SHAFT  
  3H-6660 [1] PIN  
30. 3S-4820 [1] PLUNGER  
31. 3S-4499 [1] HOUSING  
 

#UEG0637S0146
 

8S-6419: CONTROL GP-FUEL RATIO

8S6419 FUEL RATIO CONTROL GROUP--With Override
Serial No. 35B3181-Up
c303582 UEG0637S
8S6419 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1559 C [3] BOLT  
2. 3S-4780 [1] COVER  
3. 3S-4818 [1] SPRING  
4. 3S-4819 [1] GASKET  
5. 6L-5766 [1] GASKET  
6. 6N-3017 C [1] SPRING  
7. 6L-5769 [1] WASHER  
8. 6L-5767 [1] COVER  
9. 5S-6120 [1] RETAINER ASSEM.  
10. 6L-5773 [1] GASKET  
11. 6N-0968 C [1] SPRING  
12. 6N-2954 C [1] BOLT  
13. 3D-4603 [2] PLUG  
14. 5S-6458 [1] DOWEL  
15. 2M-5471 [1] BOLT  
16. 3S-4082 [1] PIN  
17. 1P-7963 [1] ARM  
18. 4F-7957 [2] BOLT  
19. 3S-4864 [2] SPACER  
20. 1B-2713 [1] BOLT  
21. 2M-2489 [1] SEAL  
22. 3S-4742 [1] SPRING  
23. 1B-4202 [1] NUT  
24. 3S-4741 [1] SCREW  
25. 6N-1603 C [1] HOUSING ASSEM.  
26. 4S-7458 [1] DIAPHRAGM  
27. 6L-6035 [1] DOWEL  
28. 3S-4556 [1] LEVER ASSEM.  
    (Includes)
  3S-4546 [1] LEVER  
29. 3S-4555 [1] SHAFT  
  3H-6660 [1] PIN  
30. 3S-4820 [1] PLUNGER  
31. 3S-4499 [1] HOUSING  
32. 9M-1974 C [1] WASHER  
  C   INDICATES CHANGE
 

#UEG0637S0147
 

2N-8375: METER GP-SERVICE

2N8375 SERVICE METER GROUP--S.A.E. Opposite Standard Engine Rotation
Refer also to Page 129 for special parts
c135269 UEG0637S
2N8375 METER GP-SERVICE Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-7424 [1] SHAFT  
2. 2N-7425 [1] HOUSING ASSEM.  
3. 8M-1051 [1] SEAL  
4. 2N-7422 [1] ADAPTER  
5. 1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
6. 4L-8191 [1] GASKET  
7. 8H-8731 [1] SPRING  
8. 2A-0762 [2] BOLT  
9. 5F-0547 [2] WASHER  
10. 2N-7423 [1] ADAPTER  
11. 4M-8303 [1] SEAL  
12. 9S-0211 [2] CLAMP  
13. 9S-5033 [2] BOLT  
  1H-3244 [2] LOCKWASHER  
14. 2N-8377 [1] METER ASSEM.  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  1P-4923 [1] KIT (Includes Screws, Window And Gasket)  
 

#UEG0637S0148
 

2N-8376: METER GP-SERVICE

2N8376 SERVICE METER GROUP--S.A.E. Standard Engine Rotation
Refer also to Page 129 for special parts
c135175 UEG0637S
2N8376 METER GP-SERVICE Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-7424 [1] SHAFT  
2. 2N-7425 [1] HOUSING ASSEM.  
3. 8M-1051 [1] SEAL  
4. 2N-7422 [1] ADAPTER  
5. 1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
6. 4L-8191 [1] GASKET  
7. 8H-8731 [1] SPRING  
8. 2A-0762 [2] BOLT  
9. 5F-0547 [2] WASHER  
10. 2N-7423 [1] ADAPTER  
11. 4M-8303 [1] SEAL  
12. 9S-0211 [2] CLAMP  
13. 9S-5033 [2] BOLT  
  1H-3244 [2] LOCKWASHER  
14. 2N-8378 [1] METER ASSEM.  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  1P-4923 [1] KIT (Includes Screws, Window And Gasket)  
 

#UEG0637S0149
 

3N-2693: PANEL GP-INSTRUMENT

3N2693 INSTRUMENT PANEL GROUP
Serial No. 35B688 to 35B766 inclusive
Refer also to Page 125 for special parts
c115266 UEG0637S
3N2693 PANEL GP-INSTRUMENT Parts scheme
  For full view, you need register

Parts for your D399 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [3] RETAINER  
2. [1] COVER  
3. [1] HOSE ASSEM.  
4. [2] CONNECTOR  
5. [1] BOLT  
  [1] CLIP  
  [2] GROMMET  
6. [3] NUT  
  [3] LOCKWASHER  
  [3] WASHER  
7. [1] ADAPTER  
8. H TUBE 96"  
9. [6] NUT  
10. [1] UNION  
11. [2] ELBOW  
12. [4] GROMMET  
13. [2] CLAMP  
14. [1] BOLT  
  [1] NUT  
  [1] LOCKWASHER  
  [2] WASHER  
15. [3] CLIP  
16. [1] GROMMET  
17. H TUBE 48"  
18. H TUBE 24"  
19. [1] HOSE ASSEM.  
20. [1] STRAP  
21. [2] BOLT  
  [2] LOCKWASHER  
  [2] WASHER  
22. [1] BRACKET ASSEM.  
23. [2] BOLT  
24. [3] BOLT  
  [3] NUT  
  [3] LOCKWASHER  
25. [2] ELBOW  
26. [1] BASE ASSEM.  
27. [1] HEAT INDICATOR  
28. [1] GAUGE (Fuel Pressure)  
29. [1] GAUGE (Oil Pressure)  
30. [1] PLUG  
31. [2] SCREW  
  [2] NUT  
  [2] LOCKWASHER  
32. [1] PANEL  
  H   ORDER BY THE FOOT
 

Information:

Engine News
Improved Woodward Governor Groups
1979/01/10
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump
1979/08/08
Service Kit Is Available For Woodward UG8 Governor
1979/09/19
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure
1980/01/23
Woodward Governor Available For Parallel Generator Applications
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure
1981/10/21
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16
New Bolts And Plate Used On Governor Drive Group
1983/05/25
New Actuator Cylinder Used In Air Shutoff
1983/08/17
New Governor Drive Gears And Weight Assemblies
1983/09/14
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New EG3P Actuator Assemblies Available
1984/03/07
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Current 7N2703 UG8 Governor Group Has Larger Range Of Droop Adjustment
1993/09/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improved Gasket Prevents Oil Leakage From The Governor
1978/01/18
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 5N1997 Governor Shield Group{1264}
Installation Of 5N1997 Governor Shield Group{1264}
Specifications
Fuel Injection Equipment
D399, G399, D398, G398, D379, G379 ENGINES
Fuel Transfer Pump; (6L9697 And 1N5415)
D399, G399, D398, G398, D379, G379 ENGINES
Fuel Pump And Governor Drive
D399, G399, D398, G398, D379, G379 ENGINES
Governor Control Linkage<BR> (Hydra-Mechanical)
D399, G399, D398, G398, D379, G379 ENGINES
Governor; (7L8787, 8L5814 and 7L4352)
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward EG-3P) D379 68B1616-Up, D398 66B2049-Up, D399 35B1-Up
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward UG-8) D379 68B1616-Up, D398 66B2049-Up, D399 35B1-Up
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward UG-8) G379 72B264-403, G398 73B511-795, G399 49C1-172
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward EG-3P) G379 72B264-403, G398 73B511-795
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward UG-8 And EG-3P) G379 72B404-UP, G398 73B796-UP, G399 49C173-UP
D399, G399, D398, G398, D379, G379 ENGINES
Governor<BR> (Woodward SGT) D379 68B1616-UP
D399, G399, D398, G398, D379, G379 ENGINES
Governor Drive Upper Housing<BR> (Woodward Governor)
D399, G399, D398, G398, D379, G379 ENGINES
Governor Air Actuators<BR> (2N6006, 1N9318, 7L135)
D399, G399, D398, G398, D379, G379 ENGINES
Fuel Injection Equipment
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Control Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Pump And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Air Actuators
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
3N9125 Air Actuator Group
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
2N6006 Governor Air Actuator
D399, G399, D398, G398, D379, G379 ENGINES
1N9318 &amp; 7L135 Governor Air Actuators
D399, G399, D398, G398, D379, G379 ENGINES
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure{1261}
1980/01/21
Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03
Woodward Governor Available For Parallel Generator Applications{1289,1264}
1981/04/06
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
New Bolts And Plate Used On Governor Drive Group{1288,1264}
1983/05/30
New Actuator Cylinder Used In Air Shutoff{7418,1078}
1983/08/15
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New EG3P Actuator Assemblies Available{1289}
1984/02/27
Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
Preferred Engine Timing Procedures{1250,1286,1290,1292}
1984/11/05
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Improved Woodward Governor Groups{1264,1289}
1979/01/08
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump{1256,1206}
1979/08/06
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Service Kit Is Available For Woodward UG8 Governor{1289}
1979/08/27
Current 7N2703 UG8 Governor Has Larger Range Of Droop Adjustment {1264}
1993/09/13

Caterpillar Parts SIS Catalog D399 :

GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
GOVERNOR GP
3N-4078 GOVERNOR GP
CONTROL GP-GOVERNOR
8L-5395 CONTROL GP-GOVERNOR
STOP GP-RACK
2S-9519 STOP GP-RACK
CONTROL GP-GOVERNOR
8L-5395 CONTROL GP-GOVERNOR
STOP GP-RACK
2S-9519 STOP GP-RACK
CONTROL GP-FUEL RATIO
8S-6419 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
8S-6419 CONTROL GP-FUEL RATIO
METER GP-SERVICE
2N-8375 METER GP-SERVICE
METER GP-SERVICE
2N-8376 METER GP-SERVICE

Truck sale:

 
 
Caterpillar D399
- Industrial engines
WHEELER MACHINERY CO.
Caterpillar D399, Industriemaschinen, Bau-Und Bergbauausrüstung
130.000 
Caterpillar D399, Industriemaschinen, Bau-Und Bergbauausrüstung
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
CAT D399
USD $12,000 
CAT D399

L&K Machinery
CAT D399
USD $8,995 
CAT D399

Surplus Heavy Equipment & Parts
Long Branch, New Jersey
 
 
CAT D399

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.