D398B MARINE ENGINE 67B01391-UP SERVICE EQUIPMENT AND SUPPLIES Caterpillar SIS

MARINE ENGINE D398B MARINE ENGINE 67B
D398B MARINE ENGINE 67B01391-UP UEG0646S D398B 67B (1961)

Parts group D398B:

For full view, you need register

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

NAME PLATES & TRANSFERS

FILTERS

2N-7263 AIR CLEANER GP

2N7263 AIR CLEANER GROUP
Serial No. 67B1391 to 67B1904 inclusive

2N-7263 AIR CLEANER GP

2N7263 AIR CLEANER GROUP
Serial No. 67B1905 to 67B2010 inclusive

2N-7263 AIR CLEANER GP

2N7263 AIR CLEANER GROUP
Serial No. 67B2011 to 67B2383 inclusive

2N-7263 AIR CLEANER GP

2N7263 AIR CLEANER GROUP
Serial No. 67B2384 To 67B2441 Inclusive

2N-7263 AIR CLEANER GP

2N7263 AIR CLEANER GROUP
Serial No. 67B2442-Up

7N-8853 FILTER GP-FUEL

7N8853 FUEL FILTER GROUP
Serial No. 67B2163-Up

3N-1949 DUPLEX FUEL FILTER SYSTEM

3N1949 DUPLEX FUEL FILTER SYSTEM
Serial No. 67B1391 to 67B1870 inclusive
To provide a system which allows the main filters to be changed while the engine
is running

3N-9389 FILTER GP-FUEL

3N9389 DUPLEX FUEL FILTER SYSTEM
Serial No. 67B1871-Up. To provide a system which allows the main filters
to be changed while the engine is running

8S-2391 FILTER AS-OIL

8S2391 OIL FILTER ASSEMBLY
Replaced by 6N1670
Part of 3N3223 Oil Filter Group shown on Page 113

6N-1670 FILTER AS-OIL

6N1670 OIL FILTER ASSEMBLY--Field Installation

6N-1570 FILTER AS-OIL

6N1570 FILTER AS-OIL REPLACED BY 7N8417
Part Of 3N3223 Filter-Oil

7N-8417 FILTER AS-OIL

7N8417 FILTER AS-OIL
Part Of 3N3223 Oil Filter

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--Part 1 of 3--Type 1
To provide a system that allows the main engine lubrication oil filter to be changed while the engine is running
8S2391 Filter and 3N3128 Valve parts are shown on Pages 112A, 112C, 112D and 112E

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--Part 2 of 3--Type 1
To provide a system that allows the main engine lubrication oil filter to be changed while the engine is running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--Part 3 of 3--Type 1
To provide a system that allows the main engine lubrication oil filter to be changed
while the engine is running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--Part 1 of 3--Type 2
To provide a system that allows the main engine lubrication oil filter to be changed while the engine is running
6N1570 Filter and 3N3128 Valve parts are shown on Pages 112B, 112C & 112D

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--Part 2 of 3--Type 2
To provide a system that allows the main engine lubrication oil filter to be changed while the engine is running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--Part 3 of 3--Type 2
To provide a system that allows the main engine lubrication oil filter to be changed while the engine is running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 1 OF 3--TYPE 3
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running. 6N1570 Filter And 3N3128
Valve Parts Are Shown On Pages 112B, 112C, 112D and 112E

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 2 OF 3--TYPE 3
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine is Running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 3 OF 3--TYPE 3
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 1 OF 3--TYPE 4
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running. 7N8417 Filter And 3N3128
Valve Parts Are Shown On Pages 112B, 112C, 112D And 112E

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 2 OF 3--TYPE 4
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 3 OF 3--TYPE 4
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 1 OF 3--TYPE 5
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running. 7N8417 Filter And 3N3128
Valve Parts Are Shown On Pages 112B, 112C, 112D And 112E

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 2 OF 3--TYPE 5
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 3 OF 3--TYPE 5
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 1 OF 3--TYPE 6
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running. 7N8417 Filter & 3N3128 Valve
Parts Are Shown On Pages 112B, 112C, 112D And 112E

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 2 OF 3--TYPE 6
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 3 OF 3--TYPE 6
To Provide A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 1 OF 3--TYPE 7
7N8417-Page 112B, 3N3128-Page 112C. Provides A System That Allows
The Main Engine Lubrication Filter To Be Changed While The Engine Is
Running. An Attachment

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 2 OF 3--TYPE 7
Provides A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running. An Attachment

3N-3223 FILTER GP-OIL

3N3223 OIL FILTER GROUP--PART 3 OF 3--TYPE 7
Provides A System That Allows The Main Engine Lubrication Oil Filter
To Be Changed While The Engine Is Running. An Attachment

GASKET & SEAL KITS

GASKET KITS

TOOLS

9S-7977 TOOL GP-HAND

9S7977 HAND TOOL GP
8F9866--Page 122
An Attachment

8F-9866 GREASE GUN AS

8F9866 GREASE GUN
Part of 9S7977 Tool Group shown on Page 121

Information:

(For parts list, see above)

SERVICE EQUIPMENT AND SUPPLIES

BEARING KITS

Engine News

New Caterpillar Publication, "Questions And Answers About Engine Bearings" Is Available
1980/08/13

New Connecting Rod Bearings Used
1983/04/27

Reuse Of Engine Bearings
1983/05/25

Reuse Of Engine Bearings
1983/11/30

"Off-Size" Bearing Kits Available
1991/10/01

Special Instruction

Installation Of 1P1122 Thrust Bearing Conversion Kit{1052}
Installation Of 1P1122 Thrust Bearing Conversion Kit{1052}

Installation Of Oversize Connecting Rod Bearings{1219}
Installation Of Oversize Connecting Rod Bearings{1219}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Disassembly and Assembly

Connecting Rod Bearings
D379, D398, D399 INDUSTRIAL & MARINE ENGINES

Crankshaft Main Bearings
D379, D398, D399 INDUSTRIAL & MARINE ENGINES

Service Magazine

Some Nuts Used On Main Bearing Caps Are Smaller Than Standard Size Across The Flat Sides{1203}
1980/07/14

New Main Bearings And Connecting Rod Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/02/22

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

CARTRIDGE KITS

Engine News

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01

Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15

Oil Strainer (Screen) Added To Turbocharger Thrust Bearing
1978/02/08

Special Instruction

2W724 Turbocharger Cartridge Repair Kit{1053}
2W724 Turbocharger Cartridge Repair Kit{1053}

2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}

Service Magazine

Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Oil Strainer (Screen) Added To Turbocharger Thrust Bearing{1052,1053}
1978/01/30

Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15

Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20

Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03

6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10

Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22

CHARTS & FILMS

Engine News

8N1831 Fuel Nozzle Assembly Now Approved For Use In 1693 Truck Engine; Chart For Applications Of 8N1831 And 7N5005 Fuel Nozzle Assemblies
1980/01/23

New Chart Has "D379, D398, D399 Lubrication And Maintenance Checklist"
1981/01/28

New Fuel Nozzle Test Sheet Available
1982/10/20

Reference Chart for Engine Improvements
1982/11/10

New Test Procedure Decal For Hydramechanical Shutoff Unit
1984/03/07

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed
1987/05/01

New Engine Wall Charts Give Maintenance Management Recommendations
1989/03/01

Special Instruction

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Service Magazine

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Service Charts and Decals Available {0374, 0375, 7405, 7557}
2000/03/06

Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}

FILTERS

Engine News

New Raw Water Engine Oil Cooler Is Used
1980/01/23

A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure
1980/01/23

Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12

Washer, Seal Added To Improve Oil Filter Assembly
1981/08/26

New Air Cleaner Group Has Six Clamps For Improved Seal
1981/12/16

New Air Cleaner Mounting Channel Helps Prevent Failure
1983/11/30

Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge
1984/09/12

A Soot Filter Is Available For Use With Air Cleaners
1984/12/12

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01

New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01

8N-4617 Air Cleaner Clamp Kit Available{1051}
1998/03/01

New Oil Filter Base Has Reinforcement Around The Center To Prevent Possible Cracks
1977/11/30

Specifications

Oil Filter
D379, D398, D399 INDUSTRIAL & MARINE ENGINES

Tool Operating Manual

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

Disassembly and Assembly

Fuel Filter Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES

Oil Filter Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES

Engine Oil Cooler
D379, D398, D399 INDUSTRIAL & MARINE ENGINES

Air Cleaner
D379, D398, D399 INDUSTRIAL & MARINE ENGINES

Service Magazine

New Raw Water Engine Oil Cooler Is Used{1378}
1980/01/14

Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13

New Air Cleaner Group Has Six Clamps For Improved Seal{1051}
1981/12/07

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers{1378}
1982/08/30

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27

New Air Cleaner Mounting Channel Helps Prevent Failure{1051,1063}
1983/10/31

Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge{1318,1306}
1984/02/13

A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10

Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10

Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05

New Oil Filter Base Has Reinforcement Around The Center To Prevent Possible Cracks{1306}
1977/12/05

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19

New Larger Capacity Water Separator Is Available{1250}
1979/03/12

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08

Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15

GASKET & SEAL KITS

Engine News

Gasket Kits
1982/02/10

9U5839 Liquid Gasket Material Available For Use With Aluminum
1992/04/01

New Gasket Kits To Service Caterpillar Diesel And Natural Gas Engines
1978/08/16

Improvements to Caterpillar's Gasket Kits for Engines {7555}
2001/01/01

Special Instruction

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Service Magazine

Improved Caterpillar O-ring Face Seals are Now Available {7555}
2000/05/08

HARDWARE & SEALANTS

Engine News

Use Of Metric Fasteners
1981/11/25

New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16

9U5839 Liquid Gasket Material Available For Use With Aluminum
1992/04/01

8N-4617 Air Cleaner Clamp Kit Available{1051}
1998/03/01

Special Instruction

Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}

Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}

Service Magazine

New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17

LITERATURE GP

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/01

The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
2002/12/01

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}

Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}

Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}

Tool Operating Manual

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}

Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}

456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}

Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}

Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}

Reuse And Salvage Guidelines

Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}

General Salvage and Reconditioning Techniques {0374, 1000}
General Salvage and Reconditioning Techniques {0374, 1000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}

Service Magazine

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/13

Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374}
2002/06/03

Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

LUBRICANTS & FLUIDS

Engine News

Why Engines Are Damaged By Fuel Sulfur
1979/08/22

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur
1982/05/12

Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/08/25

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests
1982/09/22

Fuel Sulfur Analyzer Available
1986/01/01

High Silicates In Antifreeze
1986/02/01

Oil Total Base Number (TBN) Test Kit Available
1986/02/01

New 8T2998 Lubricant Available
1986/03/01

High Silicates In Antifreeze
1986/03/01

Caterpillar Antifreeze Now Used And Available From Parts Departments
1986/11/01

Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit
1987/04/01

Cooling System Conditioner
1987/04/01

Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates
1988/02/01

New Publication Available-"Diesel Fuels And Your Engine"
1988/03/01

Extraction Tools For "Live Oil Sampling"
1988/05/01

Lubricant Supplement Lists Specifications For CXP Lubricants
1988/06/01

A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/01

Understanding Elevated Copper Levels in Used Oil Samples {1348, 7542}
2003/02/01

Caterpillar Extended Life Inhibitor (ELI) Is Now Available for Use in Applications that Freeze Protection Is Not Needed {1350, 1352, 1395}
2013/08/05

Special Instruction

Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}

Tool Operating Manual

NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27

Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge{1318,1306}
1984/02/13

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20

High Silicates In Antifreeze{1350}
1986/02/03

New 8T2998 Lubricant Available{0645,1210}
1986/02/17

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10

Caterpillar Antifreeze Now Used And Available From Parts Departments{1350,1395}
1986/11/10

Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23

Cooling System Conditioner{1395,1350}
1987/03/23

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22

New Publication Available-"Diesel Fuels And Your Engine"{0374,0375,0645}
1988/03/21

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06

Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Engine Coolant Can Be Recycled{1395}
1989/11/13

New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25

A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21

A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/19

Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2002/04/01

Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

MISCELLANEOUS INFORMATION

Truck Engine News

The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/08/01

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Engine News

Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed
1979/01/10

Protect Your Reconditioned Or Rebuilt Engines During Start-Up
1980/10/01

Double-Check Those Dimensions
1980/11/12

Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12

Changes Have Been Made To Caterpillar Service Literature
1981/03/04

New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group
1982/02/10

"SIRS User Instructions" Available
1982/02/24

Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/04/07

List Of Service Publications
1984/02/22

Hunting Down The Cheaters
1985/06/01

Keeping The Product Information System Up-To-Date
1985/10/01

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01

New Index Lists Engine Special Instructions By SMCS Code
1986/04/01

List of Service Publications
1986/05/01

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01

Three Types Of Maintenance Management Publications Available For Engines
1986/06/01

Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01

List of Service Publications
1986/10/01

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals
1986/11/01

Check For Dirt Before Replacing Pyrometer Switch
1987/01/01

List of Service Publications
1987/02/01

List of Service Publications
1987/08/01

List of Service Publications
1988/01/01

List of Service Publications
1988/04/01

List of Service Publications
1988/10/01

New Engine Wall Charts Give Maintenance Management Recommendations
1989/03/01

Worldwide Service Directories Available For Marine, Petroleum, Power Generation Products
1989/08/01

"Ugly's Electrical-References" SEBD0983, Now Available
1990/06/01

List of Service Publications
1990/10/01

List of Service Publications{0374,0375}
1991/03/01

List of Service Publications
1991/06/01

List of Service Publications
1991/08/01

List of Service Publications{0374,0375}
1991/12/01

List of Service Publications
1992/02/01

List of Service Publications
1992/10/01

List of Service Publications
1993/03/01

List of Service Publications
1993/08/01

Safety Vent Caps For Caterpillar Batteries
1977/07/13

New Color For Fiche In Engine Numerical Parts Record Library
1978/07/05

New Gasket Kits To Service Caterpillar Diesel And Natural Gas Engines
1978/08/16

Tips For Service Information Retrieval System (SIRS) Users
1978/11/15

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01

The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/09/01

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Special Instruction

Installation Of 1P1122 Thrust Bearing Conversion Kit{1052}
Installation Of 1P1122 Thrust Bearing Conversion Kit{1052}

Installation Of Thermocouples And Pyrometer{7466}
Installation Of Thermocouples And Pyrometer{7466}

Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}

Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}

398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}

Service Magazine

Some Nuts Used On Main Bearing Caps Are Smaller Than Standard Size Across The Flat Sides{1203}
1980/07/14

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

New Address For Repair Of Diagnostic Tools{0650}
1982/06/14

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27

Know What Type Of Repair To Make And When{0374}
1983/01/31

Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge{1318,1306}
1984/02/13

A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

New Part Numbers Designate Crankshaft Use{1202}
1985/06/24

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Three Types Of Maintenance Management Publications Available For Engines{0374}
1986/06/09

New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Double-Walled Fuel Injection Lines Protect Unattended Industrial And Marine Engines{1252,0353}
1978/05/01

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

5P8626 Tool Bit Available To Machine The 5P6595 And 5P8607 Liner Seat Inserts{0664}
1978/06/12

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22

New Publication Available-"Diesel Fuels And Your Engine"{0374,0375,0645}
1988/03/21

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Publication Available-"Coolant And Your Engine"{1395,0374,0375}
1989/02/13

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Preventive Maintenance For Batteries{1401}
1989/03/27

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

Worldwide Service Directories Available For Marine, Petroleum, Power Generation Products{0354,0370,0374,0375,1022,4450}
1989/08/14

Engine Coolant Can Be Recycled{1395}
1989/11/13

New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31

Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750}
2001/08/20

Correction to Service Magazine , "Use the Technical Information Feedback Systems" {0374}
2001/12/03

A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

PAINT

Engine News

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01

Service Magazine

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

PARTS GP-MISCELLANEOUS

Engine News

"Off-Size" Bearing Kits Available
1991/10/01

PARTS STOCK, ORDERING & RETURN

Engine Storage; Engine Start-Up After Storage
1982/02/24

Test Procedure For Hydramechanical Shutoff After Engine Storage
1983/03/16

New Part Numbers Designate Crankshaft Use
1985/07/01

Main And Connecting Rod Bearing Part Numbers
1987/01/01

Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09

Special Instruction

Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3037 AND 0R-3285 CYLINDER PACKS, AND 0R-0921 CONNECTING RODS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3037 AND 0R-3285 CYLINDER PACKS, AND 0R-0921 CONNECTING RODS FROM DEALER PARTS STOCK

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R2669 AND 0R2670 REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R2669 AND 0R2670 REMAN CYLINDER HEADS FROM DEALER PARTS STOCK

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Australia

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-CFEL

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-CSARL

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Americas

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-China

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Asia

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-APD

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Magazine

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09

Test Procedure For Hydramechanical Shutoff After Engine Storage{7418}
1983/02/28

New Part Numbers Designate Crankshaft Use{1202}
1985/06/24

Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26

PM (PREVENTIVE MAINTENANCE) KITS

Special Instruction

Use Of Preventive Maintenance Kits{7501}
Use Of Preventive Maintenance Kits{7501}

Service Magazine

Preventive Maintenance For Batteries{1401}
1989/03/27

REBUILD & SALVAGE

Engine News

Revision To Guideline For Reusable Parts Is Available
1979/03/14

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22

Protect Your Reconditioned Or Rebuilt Engines During Start-Up
1980/10/01

Reuse Of Engine Bearings
1983/05/25

Reuse Of Engine Bearings
1983/11/30

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01

Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01

Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}

Special Instruction

2W724 Turbocharger Cartridge Repair Kit{1053}
2W724 Turbocharger Cartridge Repair Kit{1053}

2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Tool Operating Manual

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Reuse And Salvage Guidelines

Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}

Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}

Service Magazine

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Repair Kit For Diesel Fuel Heater Available {1296}
1983/04/18

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03

Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

REMANUFACTURED PARTS

Truck Engine News

A Guide to Reman Product Markings is Now Available {7754}
2015/09/18

Engine News

In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09

Remanufactured Undersize Crankshafts Are Available
1984/04/11

Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01

Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01

Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01

Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01

A Guide to Reman Product Markings is Now Available {7754}
2015/09/17

Special Instruction

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Installation Of Oversize Connecting Rod Bearings{1219}
Installation Of Oversize Connecting Rod Bearings{1219}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

A Guide to Cat® Reman Product Markings {7754}
A Guide to Cat^® Reman Product Markings {7754}

Tool Operating Manual

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

Reuse And Salvage Guidelines

Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}

Service Magazine

Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

A Guide to Reman Product Markings is Now Available {7754}
2015/09/15

SHIPPING GP

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

TOOLS

Truck Engine News

New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27

Engine News

New 6V87 Gauge Measures Valve Stem Wear
1979/01/10

New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group
1980/05/14

6V3147 Main Bearing Wrench Now Available
1980/11/12

6V3150 Engine Pressure Group And 6V3121 Multitach Group Are Available For Testing Engines
1981/01/28

Changes Have Been Made To Caterpillar Service Literature
1981/03/04

Instruction Cards For "Go-No Go" Gauges Now Available
1981/07/01

New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group
1982/02/10

New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life
1982/02/24

Use 6V6035 Hardness Tester On Crankshafts
1982/02/24

Use The 6V6059 Microlite With The 6V2196 Inspection Microscope
1982/04/07

Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/04/07

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12

New Address For Repair Of Diagnostic Tools
1982/06/16

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25

Separate Valve Stem Gauges Available
1982/08/25

Dial Bore Gauge And Size Setting Fixture Available
1982/09/22

Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20

Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/15

Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15

Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15

Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/27

New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26

Hunting Down The Cheaters
1985/06/01

Fuel Sulfur Analyzer Available
1986/01/01

Oil Total Base Number (TBN) Test Kit Available
1986/02/01

New Engine Timing Indicator Group Available
1986/07/01

Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01

Check For Dirt Before Replacing Pyrometer Switch
1987/01/01

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01

Check For Plugged Orifices In Mechanical Pressure Gauges
1987/03/01

5P957 And 5P3514 Coolant And Battery Tester
1987/04/01

Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems
1987/05/01

Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01

Fluid Sampling Tools For Nonpressurized Compartments
1988/03/01

Extraction Tools For "Live Oil Sampling"
1988/05/01

New Service Tools Available
1988/10/01

Vibration Measurement System For Caterpillar Products
1989/06/01

New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01

New Adapter Group For Use With Fuel Injection Test Bench
1977/06/22

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18

Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool
1978/03/01

New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03

Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01

Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Special Instruction

Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement^*{0781, 0782}

Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement^*{0781, 0782}

Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}

Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}

Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}

Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}

Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}

6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}
6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}

Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}

Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}

Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}

Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}

Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Using the 1U6602 Photo-Tach Group{0775}
Using the 1U6602 Photo-Tach Group{0775}

Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}

Installation Of Thermocouples And Pyrometer{7466}
Installation Of Thermocouples And Pyrometer{7466}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}

Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}

Using The 6V7899 Size Setting Fixture Group{651}
Using The 6V7899 Size Setting Fixture Group{651}

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}

Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}

Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}

Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}

Tool Operating Manual

Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes

Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}

456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}

Reuse And Salvage Guidelines

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}

Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Shop Review

Engine Component Racks
Engine Component Racks

Engine Stands
Engine Stands

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}

Service Magazine

6V3147 Main Bearing Wrench Now Available{1203,0612}
1980/11/10

Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25

New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/01

Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

New Address For Repair Of Diagnostic Tools{0650}
1982/06/14

6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06

Dial Bore Gauge And Size Setting Fixture Available{0653}
1982/09/20

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16

New Engine Timing Indicator Group Available {0781,0782}
1986/07/07

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Use Gas Detector Tubes That Have Expired Dates To "Break In" The Combustion Chambers For The Fuel Sulphur Analyzer Group{0651}
1986/11/10

Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15

New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17

New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17

New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14

New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10

Fabricated Extension Prevents Fuel "Splash" During Injection Valve Testing{0650,1254}
1977/10/17

Assembly Procedure For The 5P4721 Tube (Part Of The 5P4149 Conversion Group And 5P4150 Nozzle Testing Group){0650}
1977/10/24

With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13

5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27

Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

5P8626 Tool Bit Available To Machine The 5P6595 And 5P8607 Liner Seat Inserts{0664}
1978/06/12

Four New Contact Points Added To 5P6524 Engine Timing Indicator Group{0653}
1978/08/07

New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28

New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25

4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09

Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18

New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23

Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06

Large Engine Blowby Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1988/06/20

Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25

Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03

Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08

Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29

New Hydraulic Wrenches and Pumps {0602, 0615}
2000/06/01

Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25

Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/04/01

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

WARRANTY

Engine News

How To Obtain Correct Delivery Date For Warranty Claims
1978/10/18

Service Magazine

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30

SERVICE GP

Tool Operating Manual

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

Service Magazine

SERVICE CENTER GP

Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08

KIT-REBUILD

Special Instruction

Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}

Service Magazine

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Truck sale:

80,000

Caterpillar D398BIN, Construction
- Industrial engines
FOLEY EQUIPMENT COMPANY

USD $87,000

1982 CAT D398B

Foley Equipment Company
Topeka Area, Kansas

USD $35,000

CAT D398B

Industrial Motor Power
Burbank, California