ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#UEG0647S0270
8L-5939: MOTOR AS-ELECTRIC STARTING
8L5939 ELECTRIC STARTING MOTOR ASSEMBLY--R.H.--32 Volt--Part 2 of 2
Part of 6L1550 and 6L2747 Electric Starting Groups shown on Pages 57 and 58
Part of 6L1550 and 6L2747 Electric Starting Groups shown on Pages 57 and 58
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
7M-0324 | [1] | COIL ASSEM. | ||
3L-3380 | [1] | BUSHING | ||
7M-0329 | [12] | BRUSH ASSEM. | ||
2F-2860 | [12] | SCREW | ||
THE FOLLOWING REPAIR KIT IS AVAILABLE: | ||||
3N-3763 | [1] | KIT (terminal) | ||
(Includes Bushings, Insulator and Washer) | ||||
9G-4101 C | [1] | BUSHING | ||
1H-9721 | [1] | PLUG | ||
(Part of 7m328 Assem.) | ||||
7F-3491 | [2] | WASHER | ||
7M-0327 | [1] | WASHER | ||
6N-3279 C | [1] | INSULATOR | ||
7M-0328 | [1] | FRAME ASSEM. | ||
2B-4602 | [1] | PLUG | ||
4M-1890 | [1] | WICK | ||
(Parts of Frame Assem. 7M328) | ||||
4M-0189 | [1] | SEAL | ||
4B-1220 C | [3] | MACHINE SCREW | ||
8H-0878 | [3] | LOCKWASHER | ||
7F-3529 | [3] | WASHER | ||
7M-8651 | [1] | ARMATURE ASSEM. | ||
7M-0325 | [1] | INSULATOR | ||
7M-0333 | [1] | HOUSING ASSEM. | ||
4M-1828 | [1] | RETAINER | ||
4M-0188 | [1] | WASHER | ||
4M-1829 | [1] | BOOT | ||
2B-4602 | [1] | PLUG | ||
9F-2547 | [1] | WICK | ||
(Parts of Housing Assem. 7M333) | ||||
THE FOLLOWING REPAIR KITS ARE AVAILABLE FOR 1P2508 DRIVE ASSEM.: | ||||
7N-6098 C | [1] | KIT (cup) | ||
(Includes Cup, Spring & Retainer) | ||||
4S-9459 | [1] | KIT (washer) | ||
(Includes Washers & Retainer Cup) | ||||
9M-7609 | [1] | SPRING | ||
4M-1855 | [1] | PLUNGER ASSEM. | ||
4M-1827 | [1] | RETAINER | ||
9M-7611 | [1] | RING | ||
3F-2617 | [1] | NUT | ||
4M-1853 | [1] | LEVER ASSEM. | ||
4M-1854 | [1] | SHAFT | ||
1H-1023 | [1] | SEAL (.369 in. dia.) | ||
2D-6392 | [1] | SEAL (.239 in. dia.) | ||
9M-7611 | [1] | RING | ||
1P-2508 C | [1] | DRIVE ASSEM. | ||
(1894211) | ||||
-OR- | ||||
6N-3826 HC | [1] | DRIVE ASSEM. | ||
(480321) | ||||
9S-9774 | [1] | PINION | ||
(Part of 1P2508 Assem.) | ||||
4M-1851 | [1] | GASKET | ||
4M-1833 | [5] | SCREW (1.50 in. long) | ||
7M-0336 | [1] | SCREW (.86 in. long) | ||
4L-2729 | [1] | WASHER | ||
1M-9968 | [1] | BUSHING | ||
2F-6678 | [1] | SEAL | ||
(Parts of Housing Assem. 7M333) | ||||
1M-9971 | [1] | SPACER | ||
4M-0189 | [1] | SEAL | ||
1H-2629 | [3] | STRIP | ||
C | INDICATES CHANGE | |||
H | NOT PART OF 8L5939 MOTOR ASSEM. |
#UEG0647S0271
8L-6205: MOTOR AS-ELECTRIC STARTING
8L6205 ELECTRIC STARTING MOTOR ASSEMBLY--R.H. and L.H.--32 Volt--Part 1 of 2
Part of 6L2748 Electric Starting Group shown on Page 59
5L8595 Switch parts are shown on Page 66
Part of 6L2748 Electric Starting Group shown on Page 59
5L8595 Switch parts are shown on Page 66
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
7M-0326 | [1] | CONNECTOR | ||
3H-3680 | [2] | NUT | ||
9F-4976 | [1] | LOCKWASHER | ||
7F-3494 | [1] | WASHER (.031" THICK) | ||
9H-3757 | [2] | WASHER (.093" THICK) | ||
3L-3380 | [1] | BUSHING | ||
4M-0189 | [2] | SEAL | ||
2B-4602 | [1] | PLUG | ||
9F-2547 | [1] | WICK | ||
1H-9721 | [1] | PLUG | ||
9G-4101 C | [1] | BUSHING | ||
(PARTS OF FRAME ASSEM 5L6428) | ||||
7M-0327 | [1] | WASHER | ||
5L-6428 | [1] | FRAME ASSEM | ||
4B-1221 | [3] | SCREW | ||
8H-0878 | [3] | LOCKWASHER | ||
7F-3529 | [3] | WASHER | ||
2F-2860 | [12] | SCREW | ||
7M-0329 | [12] | BRUSH ASSEM | ||
7M-0325 | [1] | INSULATOR | ||
7M-8651 | [1] | ARMATURE ASSEM | ||
5L-6425 | [1] | COIL ASSEM | ||
4M-1855 | [1] | PLUNGER ASSEM | ||
4M-1828 | [1] | RETAINER | ||
4M-0188 | [1] | WASHER | ||
4M-1829 | [1] | BOOT | ||
6H-3622 | [4] | SCREW ASSEM | ||
5L-8595 Y | [1] | SWITCH ASSEM | ||
(SEE SEPARATE ILLUSTRATION) | ||||
7F-3488 | [6] | POLE | ||
1H-2629 | [3] | INSULATOR | ||
1M-9971 | [1] | SPACER | ||
2F-6678 | [1] | SEAL | ||
1M-9968 | [1] | BUSHING | ||
(PARTS OF HOUSING ASSEM 7M333) | ||||
9M-7609 | [1] | SPRING | ||
7M-0333 | [1] | HOUSING ASSEM | ||
4M-1827 | [1] | RETAINER | ||
9M-7611 | [1] | RING | ||
3F-2617 | [1] | NUT | ||
4M-1853 | [1] | LEVER ASSEM. | ||
4M-1854 | [1] | SHAFT | ||
1H-1023 | [1] | SEAL (.369 DIA.) | ||
2D-6392 | [1] | SEAL (.239 DIA.) | ||
9M-7611 | [1] | RING | ||
4M-1851 | [1] | GASKET | ||
3N-3150 C | [1] | CLUTCH ASSEM | ||
3N-3149 C | [1] | PINION | ||
(Part of 3N3150 Assem.) | ||||
4M-1833 | [5] | SCREW (1.50" LONG) | ||
7M-0336 | [1] | SCREW (.86" LONG) | ||
4L-2729 | [1] | WASHER | ||
2B-4602 | [1] | PLUG | ||
9F-2547 | [1] | WICK | ||
(PARTS OF HOUSING ASSEM 7M333) | ||||
THE FOLLOWING CLUTCH ASSEM. REPAIR KITS ARE AVAILABLE: | ||||
7N-6098 C | [1] | KIT (cup) | ||
(Includes Cup, Spring & Retainer) | ||||
4S-9459 | [1] | KIT (washer) | ||
(Includes Washers and Retainer Cup) | ||||
C | INDICATES CHANGE | |||
Y | SEPARATE ILLUSTRATION |
#UEG0647S0272
8L-6205: MOTOR AS-ELECTRIC STARTING
8L6205 ELECTRIC STARTING MOTOR ASSEMBLY--R.H. and L.H.--32 Volt--Part 2 of 2
Part of 6L2748 Electric Starting Group shown on Page 59
Part of 6L2748 Electric Starting Group shown on Page 59
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
7M-0332 | [1] | PLATE | ||
5H-6467 | [3] | MACHINE SCREW | ||
3B-4502 | [3] | LOCKWASHER | ||
7F-3525 | [3] | WASHER | ||
7M-0331 | [1] | PLATE ASSEM | ||
[3] | PLATE | |||
3H-3697 | [3] | PIN | ||
3B-4502 | [3] | LOCKWASHER | ||
7F-3525 | [3] | WASHER | ||
7F-3512 | [12] | SPRING | ||
(PARTS OF PLATE ASSEM 7M330) | ||||
4M-1849 | [1] | LEAD ASSEM | ||
7M-0330 | [1] | PLATE ASSEM | ||
6N-3279 C | [1] | INSULATOR | ||
1D-4719 | [1] | NUT | ||
9F-4976 | [1] | LOCKWASHER | ||
3H-3680 | [1] | NUT | ||
9F-4976 | [1] | LOCKWASHER | ||
7F-3494 | [1] | WASHER | ||
7F-3491 | [2] | WASHER | ||
8F-9206 | [1] | SEAL | ||
4M-1831 | [3] | PLUG | ||
7L-2894 | [3] | GASKET | ||
7F-4556 | [6] | BOLT | ||
8H-3481 | [6] | LOCKWASHER | ||
THE FOLLOWING REPAIR KIT IS AVAILABLE: | ||||
3N-3763 | [1] | KIT (insulator) | ||
(Includes Washers, Bushings & Insulator) | ||||
3F-0379 | [12] | SCREW | ||
2L-6679 | [3] | PLATE | ||
4B-1311 | [3] | MACHINE SCREW | ||
3B-4502 | [3] | LOCKWASHER | ||
7F-3525 | [3] | WASHER | ||
7F-3513 | [6] | HOLDER | ||
7F-3522 | [3] | SCREW | ||
3B-4502 | [3] | LOCKWASHER | ||
7F-3525 | [3] | WASHER | ||
7F-3520 | [1] | PLATE | ||
7F-3521 | [3] | PLATE | ||
(PARTS OF PLATE ASSEM 7M330) | ||||
7F-4556 | [7] | BOLT | ||
8H-3481 | [7] | LOCKWASHER | ||
4M-1831 | [1] | PLUG | ||
7L-2894 | [1] | GASKET | ||
4M-1896 | [1] | BUSHING | ||
(PART OF HOUSING ASSEM 1S297) | ||||
1S-0297 | [1] | HOUSING ASSEM | ||
C | INDICATES CHANGE |
#UEG0647S0273
6N-0424: STARTING MOTOR GP-ELECTRIC
6N424 ELECTRIC STARTING MOTOR GP-24 VOLT-PART 1 OF 3
Replaced By 3T2786-Page 65B.03. 4M1812-Page 66C
Part Of 3N7380 Electric Starting Motor
Note: Do Not Use With Automatic Start-Stop System
Replaced By 3T2786-Page 65B.03. 4M1812-Page 66C
Part Of 3N7380 Electric Starting Motor
Note: Do Not Use With Automatic Start-Stop System
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7F-4556 | [6] | BOLT | |
2. | 8H-3481 | [6] | LOCKWASHER | |
3. | 5L-6428 | [1] | FRAME ASSEM. | |
(Includes) | ||||
4. | 1H-9721 | [1] | PLUG | |
5. | 9G-4101 C | [1] | BUSHING | |
6. | 2B-4602 | [1] | PLUG | |
7. | 9F-2547 | [1] | WICK | |
8. | 3H-3680 | [2] | NUT | |
9. | 7M-8651 | [1] | ARMATURE ASSEM. | |
10. | 3L-3380 | [1] | BUSHING | |
11. | 5L-6425 | [1] | COIL ASSEM. | |
12. | 9H-3757 | [2] | WASHER | |
13. | 7F-3494 | [1] | WASHER | |
14. | 7M-0326 | [1] | CONNECTOR | |
15. | 7M-0327 | [1] | WASHER | |
16. | 4M-1812 Y | [1] | SWITCH ASSEM. | |
(Separate Illustration) | ||||
17. | 6H-3622 | [4] | SCREW ASSEM. | |
18. | 9F-4976 | [1] | LOCKWASHER | |
19. | 3F-0379 | [12] | SCREW | |
20. | 7M-0325 | [1] | INSULATOR | |
21. | 4M-1831 | [3] | PLUG | |
22. | 7L-2894 | [3] | GASKET | |
23. | 1H-2629 | [3] | STRIP | |
24. | 7F-3488 | [6] | POLE | |
C | INDICATES CHANGE | |||
Y | SEPARATE ILLUSTRATION |
#UEG0647S0274
6N-0424: STARTING MOTOR GP-ELECTRIC
6N424 ELECTRIC STARTING MOTOR GP-24 VOLT-PART 2 OF 3
Replaced By 3T2786-Page 65B.03
Part Of 3N7380 Electric Starting Motor
Note: Do Not Use With Automatic Start-Stop System
Replaced By 3T2786-Page 65B.03
Part Of 3N7380 Electric Starting Motor
Note: Do Not Use With Automatic Start-Stop System
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4M-1849 | [1] | LEAD ASSEM. | |
2. | 4M-0189 | [1] | SEAL | |
3. | 7F-3529 | [3] | WASHER | |
4. | 8H-0878 | [3] | LOCKWASHER | |
5. | 4B-1221 | [3] | SCREW | |
6. | 7M-0330 | [1] | PLATE ASSEM. | |
7. | 7F-3525 | [12] | WASHER | |
8. | 7F-3520 | [1] | PLATE | |
9. | 5H-6467 | [3] | SCREW | |
10. | 7H-2079 | [12] | LOCKWASHER | |
11. | 2L-6679 | [3] | PLATE | |
12. | 7F-3513 | [6] | HOLDER | |
13. | 7F-3522 | [3] | SCREW | |
14. | 7F-3512 | [12] | SPRING | |
15. | 7M-0331 | [1] | PLATE ASSEM. | |
16. | 7F-3521 | [3] | PLATE | |
17. | 7F-7611 | [3] | SCREW | |
18. | 7M-0322 | [1] | PLATE | |
19. | 3H-3697 | [3] | SCREW | |
20. | 2F-2860 | [12] | SCREW 7.93 mm(.312 in.) long | |
21. | 7M-0329 | [12] | BRUSH ASSEM. | |
22. | 7F-3491 | [2] | WASHER | |
23. | 8F-9206 | [1] | SEAL | |
24. | 6N-3279 | [1] | INSULATOR | |
25. | 1D-4719 | [1] | NUT | |
26. | 7F-3494 | [1] | WASHER | |
27. | 9F-4976 | [2] | LOCKWASHER | |
28. | 3H-3680 | [1] | NUT |
#UEG0647S0275
6N-0424: STARTING MOTOR GP-ELECTRIC
6N424 ELECTRIC STARTING MOTOR GP-24 VOLT-PART 3 OF 3
Replaced By 3T2786-Page 65B.03
Part Of 3N7380 Electric Starting Motor
Note: Do Not Use With Automatic Start-Stop System
Replaced By 3T2786-Page 65B.03
Part Of 3N7380 Electric Starting Motor
Note: Do Not Use With Automatic Start-Stop System
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9M-7606 | [1] | PLUNGER ASSEM. | |
2. | 4M-0188 | [1] | WASHER | |
3. | 4M-1829 | [1] | BOOT | |
4. | 4M-1828 | [1] | RETAINER | |
5. | 9M-7609 | [1] | SPRING | |
6. | 4M-1827 | [1] | RETAINER | |
7. | 1H-1023 | [1] | SEAL | |
8. | 7M-0333 | [1] | HOUSING ASSEM. | |
(Includes) | ||||
9. | 9F-2547 | [1] | WICK | |
10. | 9F-2247 | [1] | PLUG | |
11. | 1M-9968 | [1] | BUSHING | |
12. | 2F-6678 | [1] | SEAL | |
13. | 7S-9826 | [1] | PLUG | |
14. | 7S-9825 | [1] | GASKET | |
15. | 9M-7611 | [2] | RING | |
16. | 4L-2729 | [1] | WASHER | |
17. | 4M-1853 | [1] | LEVER ASSEM. | |
18. | 3F-2617 | [1] | NUT | |
19. | 7L-2894 | [1] | GASKET | |
20. | 4M-1831 | [1] | PLUG | |
21. | 1S-0297 | [1] | HOUSING ASSEM. | |
(Includes) | ||||
22. | 4M-1896 | [1] | BUSHING | |
23. | 4M-1833 | [5] | SCREW 38 mm(1.50 in.) long | |
7M-0336 | [1] | SCREW 22 mm(.875 in.) long | ||
24. | 3N-3150 | [1] | CLUTCH ASSEM. | |
(Includes) | ||||
25. | 3N-3149 | [1] | PINION | |
26. | 1M-9971 | [1] | SPACER | |
27. | 4M-1851 | [1] | GASKET | |
28. | 4M-1854 | [1] | SHAFT | |
28. | 2D-6392 | [1] | SEAL | |
30. | 7F-4556 | [7] | BOLT | |
31. | 8H-3481 | [7] | LOCKWASHER | |
32. | 4M-0189 | [1] | SEAL | |
THE FOLLOWING REPAIR KIT IS AVAILABLE | ||||
3N-3763 | [1] | KIT (terminal) | ||
(Includes Bushings, Insulator, & Washer) | ||||
7N-6098 | [1] | KIT (cup) | ||
4S-9459 | [1] | KIT (washer) | ||
(For Repair of 3N3150 Clutch Assem.) |
#UEG0647S0276
3T-2786: STARTING MOTOR GP-ELECTRIC
3T2786 ELECTRIC STARTING MOTOR GP-24 VOLT-PART 1 OF 3
Replaced By 3T8954-Page 65B.06. 3T3421-Page 66D
Part Of 3N7380 Electric Starting Motor
Replaced By 3T8954-Page 65B.06. 3T3421-Page 66D
Part Of 3N7380 Electric Starting Motor
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 036-9823 | [6] | BOLT | |
2. | 1L-4789 | [6] | LOCKWASHER | |
3. | 3T-5440 | [1] | FRAME AS-END | |
4. | 3T-3423 | [1] | CUP | |
5. | 9G-4101 | [1] | BUSHING-END | |
6. | 3T-3424 | [1] | PLUG-FELT | |
7. | 3H-3680 | [1] | NUT-JAM | |
8. | 7M-0327 | [1] | WASHER-THRUST | |
9. | 7M-8651 | [1] | ARMATURE AS | |
10. | 3L-3380 | [1] | BUSHING | |
11. | 5L-6425 | [1] | COIL AS-FIELD | |
12. | 9H-3757 | [2] | WASHER | |
13. | 7F-3494 | [1] | WASHER-STUD | |
14. | 7M-0326 | [1] | CONNECTOR | |
15. | 3H-3681 | [1] | NUT-FULL | |
16. | 3T-3421 CY | [1] | SOLENOID AS | |
17. | 6H-3622 | [4] | SCREW-MACHINE | |
18. | 9F-4976 | [1] | LOCKWASHER | |
19. | 3F-0379 | [12] | SCREW-POLE SHOE | |
20. | 7M-0325 | [1] | INSULATOR-COIL | |
21. | 4M-1831 | [3] | PLUG-LEVER HOUSING | |
22. | 7L-2894 | [3] | GASKET | |
23. | 1H-2629 | [3] | STRIP-INSULATION | |
24. | 7F-3488 | [6] | SHOE-POLE | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#UEG0647S0277
3T-2786: STARTING MOTOR GP-ELECTRIC
3T2786 ELECTRIC STARTING MOTOR GP-24 VOLT-PART 2 OF 3
Replaced By 3T8954-Page 65B.06
Part Of 3N7380 Electric Starting Motor
Replaced By 3T8954-Page 65B.06
Part Of 3N7380 Electric Starting Motor
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3T-3422 | [1] | WIRE AS | |
5P-5621 D | WIRE .23M(9.06IN) | |||
2. | 2L-8071 | [1] | TERMINAL (1/2IN SCREW) | |
3. | 2L-8066 | [1] | TERMINAL | |
4. | 3T-3106 | [3] | SCREW AS | |
5. | 2J-8163 | [1] | SEAL-O-RING | |
6. | 7M-0330 | [1] | PLATE AS-BRUSH | |
7. | 7F-3525 | [12] | WASHER-BUSHING | |
8. | 7F-3520 | [1] | PLATE-CONNECTOR | |
9. | 5H-6467 | [3] | SCREW-MACHINE | |
10. | 7H-2079 | [12] | LOCKWASHER | |
11. | 2L-6679 | [3] | PLATE-INSULATOR | |
12. | 7F-3513 | [6] | HOLDER-BRUSH | |
13. | 7F-3522 | [3] | SCREW-HOLDER | |
14. | 7F-3512 | [12] | SPRING-BRUSH | |
15. | 7M-0331 | [1] | PLATE AS | |
16. | 3T-4709 | [3] | PLATE | |
17. | 7F-7611 | [3] | SCREW | |
18. | 7M-0332 | [1] | PLATE-INSULATOR | |
19. | 3H-3697 | [3] | SCREW-SPECIAL | |
20. | 2F-2860 | [12] | SCREW-MACHINE | |
21. | 7M-0329 | [12] | BRUSH AS | |
22. | 7F-3491 | [2] | WASHER | |
23. | 3H-3680 | [1] | NUT-JAM | |
24. | 6N-3279 | [1] | INSULATOR | |
25. | 3H-3681 | [1] | NUT-FULL | |
26. | 7F-3494 | [1] | WASHER-STUD | |
27. | 9F-4976 | [1] | LOCKWASHER | |
D | ORDER BY THE METER |
#UEG0647S0278
3T-2786: STARTING MOTOR GP-ELECTRIC
3T2786 ELECTRIC STARTING MOTOR GP-24 VOLT-PART 3 OF 3
Replaced By 3T8954-Page 65B.06
Part Of 3N7380 Electric Starting Motor
Replaced By 3T8954-Page 65B.06
Part Of 3N7380 Electric Starting Motor
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9M-7606 | [1] | PLUNGER AS | |
2. | 036-9821 | [1] | WASHER | |
3. | 4M-1829 | [1] | BOOT-RUBBER | |
4. | 4M-1828 | [1] | RETAINER-SPRING | |
5. | 9M-7609 | [1] | SPRING | |
6. | 4M-1827 | [1] | RETAINER-SPRING | |
7. | 1H-1023 | [1] | SEAL-O-RING | |
8. | 3T-3420 | [1] | HOUSING AS-LEVER | |
9. | 3T-3424 | [1] | PLUG-FELT | |
10. | 3T-3423 | [1] | CUP | |
11. | 9G-9817 | [1] | BUSHING | |
12. | 2F-6678 | [1] | SEAL-LIP TYPE | |
13. | 3T-3433 | [1] | PLUG | |
14. | 4M-1851 | [1] | GASKET | |
15. | 9M-7611 | [2] | RING-RETAINING | |
16. | 2J-8163 | [2] | SEAL-O-RING | |
17. | 4M-1853 | [1] | LEVER AS-SHIFT | |
18. | 5M-3034 | [1] | LOCKNUT | |
19. | 7L-2894 | [1] | GASKET | |
20. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
21. | 3T-4700 | [1] | HOUSING AS-DRIVE | |
22. | 9G-9818 | [1] | BUSHING | |
23. | 3T-3424 | [1] | PLUG-FELT | |
24. | 3T-3423 | [1] | CUP | |
25. | 4M-1833 | [4] | SCREW 38.1MM(1.5IN)LG | |
7M-0336 | [1] | SCREW 22.23MM(.875IN)LG | ||
26. | 1M-9971 | [1] | SPACER | |
27. | 3T-5343 | [1] | DRIVE AS-MOTOR | |
28. | 4M-1854 | [1] | SHAFT-LEVER | |
29. | 2D-6392 | [1] | SEAL-O-RING | |
30. | 036-9823 | [7] | BOLT | |
31. | 1L-4789 | [7] | LOCKWASHER |
#UEG0647S0279
3T-8954: STARTING MOTOR GP-ELECTRIC
3T8954 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 1 OF 3
3T3421-Page 66D. Part Of 3N7380 Electric Starting Motor
3T3421-Page 66D. Part Of 3N7380 Electric Starting Motor
Parts for your D379A MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 036-9823 | [6] | BOLT | |
2. | 7F-3488 | [6] | SHOE | |
3. | 3T-5440 | [1] | FRAME ASSEM. | |
(Includes) | ||||
4. | 3T-3423 | [1] | CUP | |
5. | 9G-4101 | [1] | BUSHING | |
6. | 3T-3424 | [1] | PLUG | |
7. | 3H-3680 | [1] | NUT | |
8. | 7M-0327 | [1] | WASHER | |
9. | 7M-8651 | [1] | ARMATURE ASSEM. | |
10. | 3L-3380 | [1] | BUSHING | |
11. | 5L-6425 | [1] | COIL ASSEM. | |
12. | 9H-3757 | [2] | WASHER | |
13. | 7F-3494 | [1] | WASHER | |
14. | 7M-0326 | [1] | CONNECTOR | |
15. | 3H-3681 | [1] | NUT | |
16. | 3T-3421 Y | [1] | SOLENOID ASSEM. | |
(Separate Illustration) | ||||
17. | 6H-3622 | [4] | SCREW ASSEM. | |
18. | 9F-4976 | [1] | LOCKWASHER | |
19. | 3F-0379 | [12] | SCREW | |
20. | 7M-0325 | [1] | INSULATOR | |
21. | 4M-1831 | [3] | PLUG | |
22. | 7L-2894 | [3] | GASKET | |
23. | 1H-2629 | [3] | STRIP | |
Y | SEPARATE ILLUSTRATION |
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
General Service Information
Engine News
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Systems Operation
Testing and Adjusting
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
37-MT, 41-MT, and 42-MT Series Starting Motors
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Starting Motor - Delco 50-MT
Disassembly and Assembly
Service Magazine