AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D399 MARINE ENGINE 91B00387-UP FUEL SYSTEM Caterpillar SIS



MARINE ENGINE D399 MARINE ENGINE 91B
 D399 MARINE ENGINE 91B00387-UP UEG0648S D399 91B   (1967)

Parts group D399:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
8S-6419 CONTROL GP-FUEL RATIO
8S6419 CONTROL GP-FUEL RATIO-WITH OVERRIDE
S/N 91B387-997
CONTROL GP-FUEL RATIO
8S-6419 CONTROL GP-FUEL RATIO
8S6419 CONTROL GP-FUEL RATIO-WITH OVERRIDE
S/N 91B998-Up
CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8L-5395 CONTROL GP-GOVERNOR
8L5395 CONTROL GP-GOVERNOR
S/N 91B387-525
CONTROL GP-GOVERNOR
8L-5395 CONTROL GP-GOVERNOR
8L5395 CONTROL GP-GOVERNOR
S/N 91B526-Up
MORSE MARINE CONTROL CABLES
MORSE MARINE CONTROL CABLES
PNEUMATIC REMOTE CONTROL GPS
PNEUMATIC REMOTE CONTROL GPS-PILOT HOUSE
CONTROL GP-GOVERNOR
2N-6030 CONTROL GP-GOVERNOR
2N6030 AIR ACTUATED GOVERNOR CONTROL GP
ACTUATOR GP-AIR
2N-6006 ACTUATOR GP-AIR
2N6006 AIR ACTUATED GP-TYPE 1
Part Of 2N6030 Air Actuated Governor Control
ACTUATOR GP-AIR
2N-6006 ACTUATOR GP-AIR
2N6006 AIR ACTUATED GP-TYPE 2
Part Of 2N6030 Air Actuated Governor Control
CONTROL GP-GOVERNOR
7N-4195 CONTROL GP-GOVERNOR
7N4195 GOVERNOR CONTROL GROUP
Refer To Chart-Page 108A.04 For Usage
CONTROL GP-GOVERNOR
8L-4445 CONTROL GP-GOVERNOR
8L4445 GOVERNOR CONTROL GP-REMOTE & POSITIVE LOCKING
CONTROL GP-GOVERNOR
8L-4443 CONTROL GP-GOVERNOR
8L4443 GOVERNOR CONTROL GP-POSITIVE LOCKING
CONTROL GP-GOVERNOR
8L-4444 CONTROL GP-GOVERNOR
8L4444 GOVERNOR CONTROL GP-TYPE 1
Vernier & Positive Lock
CONTROL GP-GOVERNOR
8L-4444 CONTROL GP-GOVERNOR
8L4444 GOVERNOR CONTROL GP-TYPE 2
Vernier & Positive Lock
MOUNTING GP-ACTUATOR
5N-3212 MOUNTING GP-ACTUATOR
5N3212 PNEUMATIC REMOTE CONTROL GP-ENGINE MOUNTED
CONVERSION GP-GOVERNOR
4N-6685 CONVERSION GP-GOVERNOR
4N6685 GOVERNOR SPRING CONVERSION GP
Reduces Tendency To Stall When Loads Are Applied At Low Idle
SWITCH GP
7N-4196 SWITCH GP
7N4196 WOODWARD GOVERNOR SYNCHRONIZING MOTOR SWITCH GP-TYPE 1
Refer To Chart-Page 108A.04 For Usage
SWITCH GP
7N-4196 SWITCH GP
7N4196 WOODWARD GOVERNOR SYNCHRONIZING MOTOR SWITCH GP-TYPE 2
Refer To Chart-Page 108A.04 For Usage
SWITCH GP
7N-4196 SWITCH GP
7N4196 WOODWARD GOVERNOR SYNCHRONIZING MOTOR SWITCH GP-TYPE 3
Refer To Chart-Page 108A.04 For Usage
CONTROL GP-PNEUMATIC REMOTE
2N-2981 CONTROL GP-PNEUMATIC REMOTE
2N2981 PNEUMATIC REMOTE CONTROL GP-ENGINE MOUNTED-TYPE 1
For Use With 7261 Marine Gear
CONTROL GP-PNEUMATIC REMOTE
2N-2981 CONTROL GP-PNEUMATIC REMOTE
2N2981 PNEUMATIC REMOTE CONTROL GP-ENGINE MOUNTED-TYPE 2
For Use With 7261 Marine Gear
CONTROL GP-GOVERNOR
3N-9125 CONTROL GP-GOVERNOR
3N9125 GOVERNOR CONTROL GP-AIR ACTUATED
S/N 91B500-Up
For Use With UG8-L Woodward Governor
DRAIN GP-FUEL
DRAIN GP-FUEL
5N-1697 DRAIN GP-FUEL
5N1697 DRAIN GP-FUEL-LINES & ALARM SWITCH
S/N 91B387-Up
For Use With 5N4516 Lines Gp-Fuel Injection-Page 45E, 45F & 45F.01
DRIVE GP-TACHOMETER
METER GP-SERVICE
3N-1589 METER GP-SERVICE
3N1589 SERVICE METER & TACHOMETER DRIVE GP
SAE Standard Engine Rotation
3N3886-Page 46A
METER GP-SERVICE
3N-1590 METER GP-SERVICE
3N1590 SERVICE METER & TACHOMETER DRIVE GP
SAE Opposite Standard Engine Rotation
3N3886-Page 46A
DRIVE GP-TACHOMETER
3N-3886 DRIVE GP-TACHOMETER
3N3886 DRIVE GP-TACHOMETER
Part Of 3N1589 & 3N1590 Service Meter & Tachometer Drive Gps
8L-5438 DRIVE GP-TACHOMETER
8L5438 SHUT-OFF & TACHOMETER DRIVE GP
DRIVE GP-TACHOMETER
6L-2211 DRIVE GP-TACHOMETER
6L2211 DRIVE GP-TACHOMETER
Part Of 8L5438 Shut-Off & Tachometer Drive Gp
FILTER GP-FUEL
FILTER GP-PRIMING PUMP & FUEL
2N-0887 FILTER GP-PRIMING PUMP & FUEL
2N0887 FUEL FILTER & PRIMING PUMP GP
S/N 91B387-455
FILTER GP-PRIMING PUMP & FUEL
2N-0887 FILTER GP-PRIMING PUMP & FUEL
2N0887 FUEL FILTER & PRIMING PUMP GP
S/N 91B456-546
FILTER GP-PRIMING PUMP & FUEL
2N-0887 FILTER GP-PRIMING PUMP & FUEL
2N0887 FUEL FILTER & PRIMING PUMP GP
S/N 91B547-1104
FILTER GP-FUEL
7N-8867 FILTER GP-FUEL
7N8867 FILTER GP-FUEL-PART 1 of 2
S/N 91B1105-Up
FILTER GP-FUEL
7N-8867 FILTER GP-FUEL
7N8867 FILTER GP-FUEL-PART 2 of 2
S/N 91B1105-Up
FILTER GP-FUEL
5R-2787 FILTER GP-FUEL
5R2787 FUEL FILTER GP-PART 1 of 2
S/N 91B1105-Up
FILTER GP-FUEL
5R-2787 FILTER GP-FUEL
5R2787 FUEL FILTER GP-PART 2 of 2
S/N 91B1105-Up
3N-1951 FILTER SYSTEM AR
3N1951 FUEL FILTER SYSTEM ARRANGEMENT
To Provide A System Which Allows The Main Filters To Be Changed
While The Engine Is Running
3N-9387 SYSTEM AR-FUEL FILTER
3N9387 DUPLEX FUEL FILTER SYSTEM
To Provide A System That Allows The Main Filters To Be Changed While The
Engine Is Running. Cannot Be Used With 2W2368, 2W2369, 2W2370 & 2W2371
Instrument Panel Groups
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-TYPE 1
Part Of 3N1951 Fuel Filter System
3N2651-Page 126
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-PART 1 of 2-TYPE 2
Part Of 3N1951 Fuel Filter System
3N2651-Page 126
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-PART 2 of 2-TYPE 2
Part Of 3N1951 Fuel Filter System
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-PART 1 of 2-TYPE 3
Part Of 3N1951 Fuel Filter System
3N2651-Page 126
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-PART 2 of 2-TYPE 3
Part Of 3N1951 Fuel Filter System
PUMP & FILTER GP
3N-9393 PUMP & FILTER GP
3N9393 FUEL FILTER & PRIMING PUMP GP-PART 1 of 2
Replaced By 5N5122-Page 125G
Part Of 3N9387 Duplex Fuel Filter System
PUMP & FILTER GP
3N-9393 PUMP & FILTER GP
3N9393 FUEL FILTER & PRIMING PUMP GP-PART 2 of 2
Replaced By 5N5122-Page 125G
Part Of 3N9387 Duplex Fuel Filter System
3N2651-Page 126
FILTER GP-PRIMING PUMP & FUEL
5N-5122 FILTER GP-PRIMING PUMP & FUEL
5N5122 FUEL FILTER & PRIMING PUMP GP-PART 1 of 2
Part Of 3N9387 Duplex Fuel Filter System
FILTER GP-PRIMING PUMP & FUEL
5N-5122 FILTER GP-PRIMING PUMP & FUEL
5N5122 FUEL FILTER & PRIMING PUMP GP-PART 2 of 2
Part Of 3N9387 Duplex Fuel Filter System
7N8599-Page 41C, 5N5121-Page 126B
GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 1 of 2
S/N 91B387-499
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 2 of 2
S/N 91B387-499
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 1 of 2
S/N 91B500-705
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 2 of 2
S/N 91B500-705
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 1 of 2
S/N 91B706-1456
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 2 of 2
S/N 91B706-1456
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 1 OF 2
S/N 91B1457-Up
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 2 OF 2
S/N 91B1457-Up
GOVERNOR GP
8L-5814 GOVERNOR GP
8L5814 GOVERNOR GP-TOP VIEW-PART 1 OF 3
S/N 91B387-499
GOVERNOR GP
8L-5814 GOVERNOR GP
8L5814 GOVERNOR GP-SIDE VIEW-PART 2 OF 3
S/N 91B387-499
2S9519-Page 38D
GOVERNOR GP
8L-5814 GOVERNOR GP
8L5814 GOVERNOR GP-SIDE VIEW-PART 3 OF 3
S/N 91B387-499
GOVERNOR GP
3N-4078 GOVERNOR GP
3N4078 GOVERNOR GP-PART 1 OF 3
S/N 91B500-909
GOVERNOR GP
3N-4078 GOVERNOR GP
3N4078 GOVERNOR GP-PART 2 OF 3
S/N 91B500-909
2S9519-Page 38D
GOVERNOR GP
3N-4078 GOVERNOR GP
3N4078 GOVERNOR GP-PART 3 OF 3
S/N 91B500-909
GOVERNOR GP
3N-4078 GOVERNOR GP
3N4078 GOVERNOR GP-PART 1 OF 3
S/N 91B910-1403
GOVERNOR GP
3N-4078 GOVERNOR GP
3N4078 GOVERNOR GP-PART 2 OF 3
S/N 91B910-1403
2S9519-Page 38D
GOVERNOR GP
3N-4078 GOVERNOR GP
3N4078 GOVERNOR GP-PART 3 OF 3
S/N 91B910-1403
GOVERNOR GP
3N-4078 GOVERNOR GP
3N4078 GOVERNOR GP-PART 1 OF 3
S/N 91B1404-Up
GOVERNOR GP
3N-4078 GOVERNOR GP
3N4078 GOVERNOR GP-PART 2 OF 3
S/N 91B1404-Up
2S9519-Page 38D
GOVERNOR GP
3N-4078 GOVERNOR GP
3N4078 GOVERNOR GP-PART 3 OF 3
S/N 91B1404-Up
ACTUATOR GP-AIR
2N-6006 ACTUATOR GP-AIR
2N6006 AIR ACTUATED GP-TYPE 1
Part Of 2N6030 Air Actuated Governor Control
ACTUATOR GP-AIR
2N-6006 ACTUATOR GP-AIR
2N6006 AIR ACTUATED GP-TYPE 2
Part Of 2N6030 Air Actuated Governor Control
CONVERSION GP-GOVERNOR
4N-6685 CONVERSION GP-GOVERNOR
4N6685 GOVERNOR SPRING CONVERSION GP
Reduces Tendency To Stall When Loads Are Applied At Low Idle
CHART-GOVERNOR
7N-4200 CHART-GOVERNOR
7N4200 WOODWARD GOVERNOR CHART
GOVERNOR GP-WOODWARD
7L-2882 GOVERNOR GP-WOODWARD
7L2882 WOODWARD GOVERNOR GP
S/N 91B387-499
8L8919-Page 111
For Field Replacement Of 7L2876, 2N0576, 1N8289, 1N8290-Page 110F
GOVERNOR GP-WOODWARD
3N-4114 GOVERNOR GP-WOODWARD
3N4114 WOODWARD GOVERNOR GP-TYPE 1
S/N 91B500-Up
8L8919-Page 111
GOVERNOR GP-WOODWARD
3N-4114 GOVERNOR GP-WOODWARD
3N4114 WOODWARD GOVERNOR GP-TYPE 2
S/N 91B500-Up
8L8919-Page 111
GOVERNOR GP-WOODWARD
7N-4197 GOVERNOR GP-WOODWARD
7N4197 WOODWARD GOVERNOR GP-PART 1 OF 2
Refer To Chart-Page 108A.04 For Usage
GOVERNOR GP-WOODWARD
7N-4197 GOVERNOR GP-WOODWARD
7N4197 WOODWARD GOVERNOR GP-PART 2 OF 2
Refer To Chart-Page 108A.04 For Usage
GOVERNOR GP-WOODWARD
7N-2703 GOVERNOR GP-WOODWARD
7N2703 WOODWARD GOVERNOR GP-UG8D-110 VOLT-PART 1 OF 2
Refer To Chart-Page 108A.04 For Usage
GOVERNOR GP-WOODWARD
7N-2703 GOVERNOR GP-WOODWARD
7N2703 WOODWARD GOVERNOR GP-UG8D-110 VOLT-PART 2 OF 2
Refer To Chart-Page 108A.04 For Usage
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
7N9923 WOODWARD GOVERNOR GP-UG8D-PART 1 OF 2-TYPE 1
8N5069-Page 110A.13
Refer To Chart-Page 108A.04 For Usage
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
7N9923 WOODWARD GOVERNOR GP-UG8D-PART 2 OF 2-TYPE 1
Refer To Chart-Page 108A.04 For Usage
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
7N9923 WOODWARD GOVERNOR GP-UG8D-PART 1 OF 2-TYPE 2
8N5069-Page 110A.13
Refer To Chart-Page 108A.04 For Usage
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
7N9923 WOODWARD GOVERNOR GP-UG8D-PART 2 OF 2-TYPE 2
Refer To Chart-Page 108A.04 For Usage
GOVERNOR GP-WOODWARD
5N-4414 GOVERNOR GP-WOODWARD
5N4414 WOODWARD GOVERNOR DRIVE GP
S/N 91B500-Up
Refer To Chart-Page 108A.04 For Usage
DRIVE GP-GOVERNOR
5N-2423 DRIVE GP-GOVERNOR
5N2423 WOODWARD GOVERNOR DRIVE GP
S/N 91B500-Up
Refer To Chart-Page 108A.04 For Usage
CONTROLET AS
8N-5069 CONTROLET AS
8N5069 CONTROL ASSEMBLY
Part Of 7N9923 Woodward Governor
SERVICE GP
3N-4181 SERVICE GP
3N4181 GOVERNOR UPPER DRIVE HOUSING SERVICE GP-TYPE 1
S/N 91B387-499. For Use With Sgt Or EG3P Governors Only.
Provides Field Replacement For 7L2876, 1N8289, 1N8290, & 2N0576-Page 110
SERVICE GP
3N-4181 SERVICE GP
3N4181 GOVERNOR UPPER DRIVE HOUSING SERVICE GP-TYPE 1
S/N 91B387-499. For Use With UG8 Governors Only.
Provides Field Replacement For 7L2876, 1N8289, 1N8290, & 2N0576-Page 110
SERVICE GP
3N-4181 SERVICE GP
3N4181 GOVERNOR UPPER DRIVE HOUSING SERVICE GP-TYPE 2
S/N 91B387-499
Provides Field Replacement For 7L2876, 1N8289, 1N8290, & 2N0576-Page 110
GOVERNOR GP-WOODWARD
8L-8919 GOVERNOR GP-WOODWARD
8L8919 WOODWARD GOVERNOR ASSEMBLY
Part Of 7L2882 & 3N4114 Woodward Governors
LINES GP-FUEL
DRAIN GP-FUEL
5N-1697 DRAIN GP-FUEL
5N1697 DRAIN GP-FUEL-LINES & ALARM SWITCH
S/N 91B387-Up
For Use With 5N4516 Lines Gp-Fuel Injection-Page 45E, 45F & 45F.01
LINES GP-FLEXIBLE FUEL
3N-3686 LINES GP-FLEXIBLE FUEL
3N3686 FLEXIBLE FUEL LINES GP
3N-1951 FILTER SYSTEM AR
3N1951 FUEL FILTER SYSTEM ARRANGEMENT
To Provide A System Which Allows The Main Filters To Be Changed
While The Engine Is Running
3N-9387 SYSTEM AR-FUEL FILTER
3N9387 DUPLEX FUEL FILTER SYSTEM
To Provide A System That Allows The Main Filters To Be Changed While The
Engine Is Running. Cannot Be Used With 2W2368, 2W2369, 2W2370 & 2W2371
Instrument Panel Groups
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
3N6668 FLEXIBLE FUEL OIL LINES GP-TYPE 1
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
3N6668 FLEXIBLE FUEL OIL LINES GP-TYPE 2
LINES GP-FUEL
3N-1944 LINES GP-FUEL
3N1944 FUEL LINES GP-TYPE 1
Part Of 3N1951 Fuel Filter & 3N9387 Duplex Fuel Filter Systems
LINES GP-FUEL
3N-1944 LINES GP-FUEL
3N1944 FUEL LINES GP-TYPE 2
Part Of 3N1951 Fuel Filter & 3N9387 Duplex Fuel Filter Systems
LINES GP-FUEL INJECTION
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 1 of 2
S/N 91B387-456
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVE & LINES GP-PART 2 OF 2
S/N 91B387-456
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 1 of 2
S/N 91B457-606
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 2 of 2
S/N 91B457-606
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 1 of 2
S/N 91B607-642
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 2 of 2
S/N 91B607-642
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 1 of 2
S/N 91B643-1404
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N1690 FUEL INJECTION VALVES & LINES GP-PART 2 of 2
S/N 91B643-1404
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 1 OF 2
S/N 91B1405-1447
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 2 OF 2
S/N 91B1405-1447
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 1 OF 2
S/N 91B1448-Up
FUEL INJ VALVES & LINES GP
3N-2690 FUEL INJ VALVES & LINES GP
3N2690 FUEL INJECTION VALVES & LINES GP-PART 2 OF 2
S/N 91B1448-Up
LINES GP-FUEL INJECTION
5N-4516 LINES GP-FUEL INJECTION
5N4516 LINES GP-FUEL INJECTION-TYPE 1
S/N 91B387-Up
Not For Use With 1N8293 Shut-Off Gp. Note: To Provide A Drain & Alarm
System 5N1697-Page 45G Must Be Used
An Attachment
LINES GP-FUEL INJECTION
5N-4516 LINES GP-FUEL INJECTION
5N4516 LINES GP-FUEL INJECTION-TYPE 2
S/N 91B387-Up.
Not For Use With 1N8293 Shut-Off Gp. Note: To Provide A Drain & Alarm
System 5N1697-Page 45G Must Be Used
An Attachment
LINES GP-FUEL INJECTION
5N-4516 LINES GP-FUEL INJECTION
5N4516 LINES GP-FUEL INJECTION-TYPE 3
S/N 91B387-Up
Not For Use With 1N8293 Shut-Off Group. Note: To Provide A
Drain & Alarm System, 5N1697-Page 45G Must Be Used
An Attachment
VALVE GP-FUEL INJECTION
3N-6414 VALVE GP-FUEL INJECTION
3N6414 VALVE GP-FUEL INJECTION
S/N 91B387-Up
For Use With 700-900 Applications
PUMP GP-FUEL INJECTION
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 1 of 2
S/N 91B387-499
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 2 of 2
S/N 91B387-499
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 1 of 2
S/N 91B500-705
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 2 of 2
S/N 91B500-705
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 1 of 2
S/N 91B706-1456
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 2 of 2
S/N 91B706-1456
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 1 OF 2
S/N 91B1457-Up
DRIVE GP-GOVERNOR & FUEL PUMP
3N-2686 DRIVE GP-GOVERNOR & FUEL PUMP
3N2686 FUEL PUMP & GOVERNOR DRIVE GP-PART 2 OF 2
S/N 91B1457-Up
PUMP GP-FUEL INJECTION
6L-8626 PUMP GP-FUEL INJECTION
6L8626 HOUSING GP-FUEL PUMP
PUMP GP-FUEL PRIMING
FILTER GP-PRIMING PUMP & FUEL
2N-0887 FILTER GP-PRIMING PUMP & FUEL
2N0887 FUEL FILTER & PRIMING PUMP GP
S/N 91B387-455
FILTER GP-PRIMING PUMP & FUEL
2N-0887 FILTER GP-PRIMING PUMP & FUEL
2N0887 FUEL FILTER & PRIMING PUMP GP
S/N 91B456-546
FILTER GP-PRIMING PUMP & FUEL
2N-0887 FILTER GP-PRIMING PUMP & FUEL
2N0887 FUEL FILTER & PRIMING PUMP GP
S/N 91B547-1104
PUMP GP-FUEL PRIMING
7N-8599 PUMP GP-FUEL PRIMING
7N8599 PUMP GP-FUEL PRIMING
S/N 91B1105-1195
Part Of 5N5122-Page 125H
PUMP GP-FUEL PRIMING
7N-8599 PUMP GP-FUEL PRIMING
7N8599 PUMP GP-FUEL PRIMING
S/N 91B1196-Up
Part Of 5N5122-Page 125H
3N-1951 FILTER SYSTEM AR
3N1951 FUEL FILTER SYSTEM ARRANGEMENT
To Provide A System Which Allows The Main Filters To Be Changed
While The Engine Is Running
3N-9387 SYSTEM AR-FUEL FILTER
3N9387 DUPLEX FUEL FILTER SYSTEM
To Provide A System That Allows The Main Filters To Be Changed While The
Engine Is Running. Cannot Be Used With 2W2368, 2W2369, 2W2370 & 2W2371
Instrument Panel Groups
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-TYPE 1
Part Of 3N1951 Fuel Filter System
3N2651-Page 126
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-PART 1 of 2-TYPE 2
Part Of 3N1951 Fuel Filter System
3N2651-Page 126
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-PART 2 of 2-TYPE 2
Part Of 3N1951 Fuel Filter System
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-PART 1 of 2-TYPE 3
Part Of 3N1951 Fuel Filter System
3N2651-Page 126
PUMP & FILTER GP
3N-0705 PUMP & FILTER GP
3N0705 FUEL FILTER & PRIMING PUMP GP-PART 2 of 2-TYPE 3
Part Of 3N1951 Fuel Filter System
PUMP & FILTER GP
3N-9393 PUMP & FILTER GP
3N9393 FUEL FILTER & PRIMING PUMP GP-PART 1 of 2
Replaced By 5N5122-Page 125G
Part Of 3N9387 Duplex Fuel Filter System
PUMP & FILTER GP
3N-9393 PUMP & FILTER GP
3N9393 FUEL FILTER & PRIMING PUMP GP-PART 2 of 2
Replaced By 5N5122-Page 125G
Part Of 3N9387 Duplex Fuel Filter System
3N2651-Page 126
FILTER GP-PRIMING PUMP & FUEL
5N-5122 FILTER GP-PRIMING PUMP & FUEL
5N5122 FUEL FILTER & PRIMING PUMP GP-PART 1 of 2
Part Of 3N9387 Duplex Fuel Filter System
FILTER GP-PRIMING PUMP & FUEL
5N-5122 FILTER GP-PRIMING PUMP & FUEL
5N5122 FUEL FILTER & PRIMING PUMP GP-PART 2 of 2
Part Of 3N9387 Duplex Fuel Filter System
7N8599-Page 41C, 5N5121-Page 126B
BODY AS-VALVE
3N-2651 BODY AS-VALVE
3N2651 VALVE BODY ASSEMBLY-TYPE 1
Part Of 3N0705 & 3N9393 Fuel Filter & Priming Pumps
BODY AS-VALVE
3N-2651 BODY AS-VALVE
3N2651 VALVE BODY ASSEMBLY-TYPE 2
Part Of 3N0705 & 3N9393 Fuel Filter & Priming Pumps
BODY AS-VALVE
5N-5121 BODY AS-VALVE
5N5121 VALVE BODY AS
Part Of 5N5122 Fuel Filter & Priming Pump
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
3N-2078 PUMP GP-FUEL TRANSFER
3N2078 PUMP GP-FUEL TRANSFER-TYPE 1
S/N 91B387-1005
PUMP GP-FUEL TRANSFER
3N-2078 PUMP GP-FUEL TRANSFER
3N2078 PUMP GP-FUEL TRANSFER-TYPE 2
S/N 91B387-1005
PUMP GP-FUEL TRANSFER
3N-2078 PUMP GP-FUEL TRANSFER
3N2078 PUMP GP-FUEL TRANSFER
S/N 91B1006-Up
Also Part Of 5N5632
PUMP GP-FUEL TRANSFER
5N-5632 PUMP GP-FUEL TRANSFER
5N5632 PUMP GP-FUEL TRANSFER
S/N 91B1125-Up
3N2078-Page 42A
TORQUE CONTROL GP
STOP GP-RACK
2S-9519 STOP GP-RACK
2S9519 STOP GP-RACK-TYPE 1
Part Of 8L5814 & 3N4078 Governors
STOP GP-RACK
2S-9519 STOP GP-RACK
2S9519 STOP GP-RACK-TYPE 2
Part Of 8L5814 & 3N4078 Governors

Information:

(For parts list, see above)

Service Magazine
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Control Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Air-Fuel Ratio Control
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Ratio Control With Override
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Air-Fuel Ratio Control
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Ratio Control With Override
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Engine News
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure
1981/10/21
New Actuator Cylinder Used In Air Shutoff
1983/08/17
Increased Preload Used In Air Shutoff Actuators
1985/03/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Specifications
Governor Air Actuators
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
3N9125 Air Actuator Group
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
New Actuator Cylinder Used In Air Shutoff{7418,1078}
1983/08/15
Increased Preload Used In Air Shutoff Actuators{7400,7418}
1985/02/18
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tachometer Drive Shaft Rotation{1085}
1993/08/09
Specifications
Service Meter And Tachometer Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Service Meter And Tachometer Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Tachometer Drive Shaft Rotation{1085}
1993/08/09
Engine News
Improved Fuel Priming Pumps Give Longer Service Life
1979/04/04
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure
1980/01/23
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improved Fuel Priming Pump Used
1987/05/01
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Special Instruction
Installation Of 8N6287 Fuel Priming Knob Kit{1258}
Installation Of 8N6287 Fuel Priming Knob Kit{1258}
Specifications
Fuel Control Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Priming Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Filter Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure{1261}
1980/01/21
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Improved Fuel Priming Pumps Give Longer Service Life{1258}
1979/04/02
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Installation Of 8N9754 Fuel Heater Group{1296}
Installation Of 8N9754 Fuel Heater Group{1296}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Engine News
Improved Woodward Governor Groups
1979/01/10
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump
1979/08/08
Service Kit Is Available For Woodward UG8 Governor
1979/09/19
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure
1980/01/23
Explanation Of Differences In Timing Advance Information
1981/08/26
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure
1981/10/21
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16
New Bolts And Plate Used On Governor Drive Group
1983/05/25
New Actuator Cylinder Used In Air Shutoff
1983/08/17
New Governor Drive Gears And Weight Assemblies
1983/09/14
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Increased Preload Used In Air Shutoff Actuators
1985/03/01
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines
1985/08/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Current 7N2703 UG8 Governor Group Has Larger Range Of Droop Adjustment
1993/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improved Gasket Prevents Oil Leakage From The Governor
1978/01/18
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Specifications
Fuel Injection Equipment
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Control Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Pump And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Air Actuators
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
3N9125 Air Actuator Group
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure{1261}
1980/01/21
Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
New Bolts And Plate Used On Governor Drive Group{1288,1264}
1983/05/30
New Actuator Cylinder Used In Air Shutoff{7418,1078}
1983/08/15
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Preferred Engine Timing Procedures{1250,1286,1290,1292}
1984/11/05
Increased Preload Used In Air Shutoff Actuators{7400,7418}
1985/02/18
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines{1288}
1985/08/05
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Improved Woodward Governor Groups{1264,1289}
1979/01/08
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump{1256,1206}
1979/08/06
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Service Kit Is Available For Woodward UG8 Governor{1289}
1979/08/27
Special Instruction
Installation Of 8N9754 Fuel Heater Group{1296}
Installation Of 8N9754 Fuel Heater Group{1296}
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Repair Kit For Diesel Fuel Heater Available {1296}
1983/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
8N1831 Fuel Nozzle Assembly Now Approved For Use In 1693 Truck Engine; Chart For Applications Of 8N1831 And 7N5005 Fuel Nozzle Assemblies
1980/01/23
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure
1980/01/23
List Of Correct Fuel Injection Nozzle Assemblies To Use For Different Engine Applications
1980/10/22
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Fuel Lines And New Mounting Design Now Used
1983/08/17
Correct Removal And Installation Of Double-Walled Fuel Injection Lines Help Prevent Fuel Leakage
1984/09/12
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Procedure For Seating The Ball In The Fuel Return 4L8546 Check Valve
1992/11/01
New Adapter Group For Use With Fuel Injection Test Bench
1977/06/22
Double-Walled Fuel Injection Lines Protect Unattended Industrial And Marine Engines
1978/05/03
New Nozzle Assembly Used In Fuel Injection Valves
1978/08/30
SOLAS Requirements for Fuel Lines {1274}
2003/12/01
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Disassembly and Assembly
Fuel Filter Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control With Override
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure{1261}
1980/01/21
List Of Correct Fuel Injection Nozzle Assemblies To Use For Different Engine Applications{1254}
1980/10/20
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Fuel Lines And New Mounting Design Now Used{1252}
1983/07/11
Correct Removal And Installation Of Double-Walled Fuel Injection Lines Help Prevent Fuel Leakage{1252}
1984/09/03
Preferred Engine Timing Procedures{1250,1286,1290,1292}
1984/11/05
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Double-Walled Fuel Injection Lines Protect Unattended Industrial And Marine Engines{1252,0353}
1978/05/01
New Nozzle Assembly Used In Fuel Injection Valves{1254}
1978/09/04
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Procedure For Seating The Ball In The Fuel Return 4L8546 Check Valve{1274}
1992/11/23
Engine News
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Correct Removal And Installation Of Double-Walled Fuel Injection Lines Help Prevent Fuel Leakage
1984/09/12
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Double-Walled Fuel Injection Lines Protect Unattended Industrial And Marine Engines
1978/05/03
New Nozzle Assembly Used In Fuel Injection Valves
1978/08/30
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Lines
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
List Of Correct Fuel Injection Nozzle Assemblies To Use For Different Engine Applications{1254}
1980/10/20
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Double-Walled Fuel Injection Lines Protect Unattended Industrial And Marine Engines{1252,0353}
1978/05/01
New Nozzle Assembly Used In Fuel Injection Valves{1254}
1978/09/04
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Improved Woodward Governor Groups
1979/01/10
Improved Fuel Priming Pumps Give Longer Service Life
1979/04/04
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump
1979/08/08
Service Kit Is Available For Woodward UG8 Governor
1979/09/19
Fuel Heaters Are Now Available For Field Installation
1980/01/09
8N1831 Fuel Nozzle Assembly Now Approved For Use In 1693 Truck Engine; Chart For Applications Of 8N1831 And 7N5005 Fuel Nozzle Assemblies
1980/01/23
A Spring With A Lower Rate Is Now Used In The Fuel Filter Group To Give Less Fuel Pressure
1980/01/23
How To Check Operation Of Hydramechanical Shutoffs On D379B, D398B, D399 Engines
1980/02/27
List Of Correct Fuel Injection Nozzle Assemblies To Use For Different Engine Applications
1980/10/22
Check Valve Added To Hydramechanical Shut-Off
1980/11/12
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improved Cable Assembly For Mechanical Shut-Off Group
1980/11/12
Explanation Of Differences In Timing Advance Information
1981/08/26
New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump
1982/02/10
New Test Procedure Decal For Hydramechanical Shutoff Unit
1984/03/07
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
New Adapter Group For Use With Fuel Injection Test Bench
1977/06/22
Improved Gasket Prevents Oil Leakage From The Governor
1978/01/18
New Nozzle Assembly Used In Fuel Injection Valves
1978/08/30
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N6287 Fuel Priming Knob Kit{1258}
Installation Of 8N6287 Fuel Priming Knob Kit{1258}
Specifications
Fuel Injection Equipment
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Control Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Pump And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Air-Fuel Ratio Control
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Air Actuators
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
3N9125 Air Actuator Group
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Shutoff Valve For Water Temperature
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Air Inlet Shut Off
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Hydramechanical Shut-Off 3N5760, 5N1978, 5N5993 &amp; 5N5994
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Mechanical Overspeed Shutoff
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Priming Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Water Temperature Regulators
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Filter Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control With Override
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Shutoff Control
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Shutoff Control Group
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
List Of Correct Fuel Injection Nozzle Assemblies To Use For Different Engine Applications{1254}
1980/10/20
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Test Procedure For Hydramechanical Shutoff After Engine Storage{7418}
1983/02/28
New Bolts And Plate Used On Governor Drive Group{1288,1264}
1983/05/30
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Helper Spring Groups Improve Operation Of Air Shutoff Groups{7400,7418}
1984/10/01
Preferred Engine Timing Procedures{1250,1286,1290,1292}
1984/11/05
Increased Preload Used In Air Shutoff Actuators{7400,7418}
1985/02/18
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Oil Pressure Shutdown Specifications Change For Hydramechanical Shutoff System{1085}
1985/11/25
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Improved Woodward Governor Groups{1264,1289}
1979/01/08
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Improved Fuel Priming Pumps Give Longer Service Life{1258}
1979/04/02
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Service Kit Is Available For Woodward UG8 Governor{1289}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Tachometer Drive Shaft Rotation{1085}
1993/08/09
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Nozzle Assembly Used In Fuel Injection Valves{1254}
1978/09/04
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Engine News
Improved Woodward Governor Groups
1979/01/10
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump
1979/08/08
Service Kit Is Available For Woodward UG8 Governor
1979/09/19
8N1831 Fuel Nozzle Assembly Now Approved For Use In 1693 Truck Engine; Chart For Applications Of 8N1831 And 7N5005 Fuel Nozzle Assemblies
1980/01/23
List Of Correct Fuel Injection Nozzle Assemblies To Use For Different Engine Applications
1980/10/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure
1981/10/21
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16
New Bolts And Plate Used On Governor Drive Group
1983/05/25
New Governor Drive Gears And Weight Assemblies
1983/09/14
Correct Removal And Installation Of Double-Walled Fuel Injection Lines Help Prevent Fuel Leakage
1984/09/12
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines
1985/08/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Current 7N2703 UG8 Governor Group Has Larger Range Of Droop Adjustment
1993/09/01
New Adapter Group For Use With Fuel Injection Test Bench
1977/06/22
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improved Gasket Prevents Oil Leakage From The Governor
1978/01/18
New Nozzle Assembly Used In Fuel Injection Valves
1978/08/30
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Specifications
Fuel Injection Equipment
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Control Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Pump And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Air Actuators
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Rocker Shafts And Push Rods
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Rocker Shafts
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
List Of Correct Fuel Injection Nozzle Assemblies To Use For Different Engine Applications{1254}
1980/10/20
Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
New Bolts And Plate Used On Governor Drive Group{1288,1264}
1983/05/30
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Correct Removal And Installation Of Double-Walled Fuel Injection Lines Help Prevent Fuel Leakage{1252}
1984/09/03
Preferred Engine Timing Procedures{1250,1286,1290,1292}
1984/11/05
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines{1288}
1985/08/05
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Nozzle Assembly Used In Fuel Injection Valves{1254}
1978/09/04
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Improved Woodward Governor Groups{1264,1289}
1979/01/08
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump{1256,1206}
1979/08/06
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Service Kit Is Available For Woodward UG8 Governor{1289}
1979/08/27
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Improved Fuel Priming Pumps Give Longer Service Life
1979/04/04
Improved Fuel Priming Pump Used
1987/05/01
Special Instruction
Installation Of 8N6287 Fuel Priming Knob Kit{1258}
Installation Of 8N6287 Fuel Priming Knob Kit{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Specifications
Fuel Control Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Priming Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Improved Fuel Priming Pumps Give Longer Service Life{1258}
1979/04/02
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
Improved Woodward Governor Groups
1979/01/10
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump
1979/08/08
Service Kit Is Available For Woodward UG8 Governor
1979/09/19
Explanation Of Differences In Timing Advance Information
1981/08/26
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure
1981/10/21
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16
New Bolts And Plate Used On Governor Drive Group
1983/05/25
New Governor Drive Gears And Weight Assemblies
1983/09/14
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines
1985/08/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Current 7N2703 UG8 Governor Group Has Larger Range Of Droop Adjustment
1993/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improved Gasket Prevents Oil Leakage From The Governor
1978/01/18
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N6287 Fuel Priming Knob Kit{1258}
Installation Of 8N6287 Fuel Priming Knob Kit{1258}
Specifications
Fuel Injection Equipment
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Control Valve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Pump And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Upper Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Air Actuators
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Transfer Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
New Bolts And Plate Used On Governor Drive Group{1288,1264}
1983/05/30
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Preferred Engine Timing Procedures{1250,1286,1290,1292}
1984/11/05
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines{1288}
1985/08/05
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Improved Woodward Governor Groups{1264,1289}
1979/01/08
Improved Fuel Priming Pumps Give Longer Service Life{1258}
1979/04/02
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Front Accessory Drive Group Changed; New Drive Parts For Fuel Transfer Pump{1256,1206}
1979/08/06
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Service Kit Is Available For Woodward UG8 Governor{1289}
1979/08/27
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Disassembly and Assembly
Water Temperature Regulators
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
How To Check Operation Of Hydramechanical Shutoffs On D379B, D398B, D399 Engines
1980/02/27
Check Valve Added To Hydramechanical Shut-Off
1980/11/12
Improved Cable Assembly For Mechanical Shut-Off Group
1980/11/12
New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump
1982/02/10
Service Information For Hydramechanical Shutoff Units
1983/02/16
Test Procedure For Hydramechanical Shutoff After Engine Storage
1983/03/16
New Actuator Cylinder Used In Air Shutoff
1983/08/17
New Test Procedure Decal For Hydramechanical Shutoff Unit
1984/03/07
Changes Made To Air Shutoff And Rack Shutoff Groups
1984/06/20
Helper Spring Groups Improve Operation Of Air Shutoff Groups
1984/10/24
Increased Preload Used In Air Shutoff Actuators
1985/03/01
Improved Remote Shutoff Group Has New Pressure Control Group
1985/06/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Oil Pressure Shutdown Specifications Change For Hydramechanical Shutoff System
1985/12/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Specifications
Shutoff Valve For Water Temperature
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Air Inlet Shut Off
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Hydramechanical Shut-Off 3N5760, 5N1978, 5N5993 &amp; 5N5994
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Mechanical Overspeed Shutoff
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Shutoff Control
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing, Shutoff Control, Governor And Governor Drive Housing
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Shutoff Control Group
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03
Improved Cable Assembly For Mechanical Shut-Off Group{7418}
1980/11/17
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump{7418}
1982/01/25
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Test Procedure For Hydramechanical Shutoff After Engine Storage{7418}
1983/02/28
New Actuator Cylinder Used In Air Shutoff{7418,1078}
1983/08/15
Helper Spring Groups Improve Operation Of Air Shutoff Groups{7400,7418}
1984/10/01
Increased Preload Used In Air Shutoff Actuators{7400,7418}
1985/02/18
Oil Pressure Shutdown Specifications Change For Hydramechanical Shutoff System{1085}
1985/11/25
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
Fuel Sulfur Analyzer Available
1986/01/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
New Adapter Group For Use With Fuel Injection Test Bench
1977/06/22
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Four New Contact Points Added To 5P6524 Engine Timing Indicator Group{0653}
1978/08/07
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Truck sale:

 
 
Caterpillar D399
- Industrial engines
WHEELER MACHINERY CO.
Caterpillar D399, Industriemaschinen, Bau-Und Bergbauausrüstung
130.000 
Caterpillar D399, Industriemaschinen, Bau-Und Bergbauausrüstung
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
CAT D399
USD $12,000 
CAT D399

L&K Machinery
CAT D399
USD $8,995 
CAT D399

Surplus Heavy Equipment & Parts
Long Branch, New Jersey
 
 
CAT D399

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.