AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D3 TRACTOR 79U00001-04708 (MACHINE) FUEL SYSTEM Caterpillar SIS



TRACK-TYPE TRACTOR D3 TRACK-TYPE TRACTOR 79U
 D3 TRACTOR 79U00001-04708 (MACHINE) UEG0652S D3 79U   (1973)

Parts group D3:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-GOVERNOR
GOVERNOR CONTROL GROUP
6S-3522 GOVERNOR CONTROL GROUP
6S3522 GOVERNOR CONTROL GROUP
GOVERNOR AND TRANSMISSION CONTROL GROUP
6S-7071 GOVERNOR AND TRANSMISSION CONTROL GROUP
6S7071 GOVERNOR AND TRANSMISSION CONTROL GROUP
AN ATTACHMENT
LINES GP-FUEL
FUEL LINES
6S-3509 FUEL LINES
FUEL LINES (6S3509 N/S)
TANK GP-FUEL
CAP GP-PROTECTION
1P-8678 CAP GP-PROTECTION
1P8678 PROTECTION COVER GROUP--Fuel Tank Cap - Type 1
Part of 6S8336, 6S3537 and 6S8476 Arrangements and 6S8340 Mounting
Group shown on Pages 88F, 89, 90B and 96B
CAP GP-PROTECTION
1P-8678 CAP GP-PROTECTION
1P8678 PROTECTION COVER GROUP--Fuel Tank Cap--Type 2
Part of 6S8336, 6S3537 and 6S8476 Arrangements and 6S8340 Mounting
Group shown on Pages 88F, 89, 90B and 96B
FUEL TANK GROUP
6S-3510 FUEL TANK GROUP
6S3510 FUEL TANK GROUP--30 U.S. Gallons (114 litre)
Serial No. 79U1 to 79U3010 inclusive
FUEL TANK GROUP
6S-3510 FUEL TANK GROUP
6S3510 FUEL TANK GROUP--30 U.S. Gallon (114 litre)
Serial No. 79U3011-Up

Information:

(For parts list, see above)

Service Magazine
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Governor Control Linkage<BR> (Governor Control, D3 Tractor &amp; 931 Track-Type Loader)
3204 VEHICULAR ENGINE
Governor Control Linkage<BR> (For 910 Wheel Loader)
3204 VEHICULAR ENGINE
Governor Control Linkage<BR> (6S7071) (Governor And Transmission Control, An Attachment For D3 Tractor &amp; 931 Track-Type Loader)
3204 VEHICULAR ENGINE
Governor Control Linkage<BR> (5G2257) (Governor And Transmission Control, An Attachment For D3B Tractor &amp; 931B Track-Type Loader)
3204 VEHICULAR ENGINE
Transmission And Governor Control (Attachment)
D3 TRACTOR POWER TRAIN
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
6V98 Socket Available To Remove Or Install Tachometer Drive Dowel In Engine Camshaft On D3 Tractors, 910 and 931 Loaders{0612,1210,7462}
1979/04/30
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Priming Pump
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Service Magazine
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/22
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Specifications
Fuel Injection Nozzle
3204 VEHICULAR ENGINE
Governor
3204 VEHICULAR ENGINE
Injection Nozzle
3204 VEHICULAR ENGINE
Governor
3204 VEHICULAR ENGINE
Governor Control Linkage<BR> (Governor Control, D3 Tractor &amp; 931 Track-Type Loader)
3204 VEHICULAR ENGINE
Governor Control Linkage<BR> (For 910 Wheel Loader)
3204 VEHICULAR ENGINE
Governor Control Linkage<BR> (6S7071) (Governor And Transmission Control, An Attachment For D3 Tractor &amp; 931 Track-Type Loader)
3204 VEHICULAR ENGINE
Governor Control Linkage<BR> (5G2257) (Governor And Transmission Control, An Attachment For D3B Tractor &amp; 931B Track-Type Loader)
3204 VEHICULAR ENGINE
Transmission And Governor Control (Attachment)
D3 TRACTOR POWER TRAIN
Disassembly and Assembly
Fuel Transfer Pump
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Nozzles
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Pump Housing And Governor
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Governor
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
New Rack Stop Collar{1264,1286,1257}
1982/01/25
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Oil Leakage In Governor Housing; New Seal Used{1264}
1982/03/15
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Governor Bumper Spring Changed To Permit Better Accuracy In Rack Settings{1264}
1977/04/18
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Rebuild Kit For Fuel Transfer Pump{1256}
1993/09/06
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Oversize Fuel Pump Drive Idler Shaft Available To Salvage Cylinder Block{1206}
1994/10/03
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Specifications
Fuel Injection Nozzle
3204 VEHICULAR ENGINE
Injection Nozzle
3204 VEHICULAR ENGINE
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Disassembly and Assembly
Fuel Injection Valves
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Nozzles
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Service Magazine
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Specifications
Fuel Injection Nozzle
3204 VEHICULAR ENGINE
Fuel Injection Lines
3204 VEHICULAR ENGINE
Injection Nozzle
3204 VEHICULAR ENGINE
Fuel Injection Lines<BR> (DI Engine)
3204 VEHICULAR ENGINE
Fuel Injection Lines<BR> (PC Engine)
3204 VEHICULAR ENGINE
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Disassembly and Assembly
Fuel Injection Lines
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Valves
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Nozzles
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
New Electric Service Meter Used{7480}
1978/12/11
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Fuel Injection Equipment
3204 VEHICULAR ENGINE
Fuel Injection Nozzle
3204 VEHICULAR ENGINE
Fuel Injection Pump Housing
3204 VEHICULAR ENGINE
Injection Nozzle
3204 VEHICULAR ENGINE
Fuel Transfer Pump<BR> (4N6835)
3204 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Priming Pump
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Transfer Pump
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Valves
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Nozzles
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Pump Housing And Governor
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Governor
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Pump Housing
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Service Magazine
Four Fabricated Tools Available For Use During Service Of Fuel System Timing Gear{0621,0612,1206,1253,1207}
1980/12/22
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
New Rack Stop Collar{1264,1286,1257}
1982/01/25
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Oil Leakage In Governor Housing; New Seal Used{1264}
1982/03/15
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Front Housings On Earlier 3204 Engines Can Be Reworked To Use The Improved Oil Pump Relief Valve{1151,1304,1315}
1984/06/04
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Governor Bumper Spring Changed To Permit Better Accuracy In Rack Settings{1264}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Improved Accessory Drive Housing And Support Bracket{1207,1253}
1977/08/22
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Electric Service Meter Used{7480}
1978/12/11
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/22
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Specifications
Fuel Injection Nozzle
3204 VEHICULAR ENGINE
Injection Nozzle
3204 VEHICULAR ENGINE
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Disassembly and Assembly
Fuel Injection Valves
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Nozzles
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Fuel Injection Nozzle
3204 VEHICULAR ENGINE
Fuel Injection Pump Housing
3204 VEHICULAR ENGINE
Fuel Injection
3204 VEHICULAR ENGINE
Injection Nozzle
3204 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Fuel Transfer Pump
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Valves
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Nozzles
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Pump Housing And Governor
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Governor
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Pump Housing
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Rack Stop Collar{1264,1286,1257}
1982/01/25
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Oil Leakage In Governor Housing; New Seal Used{1264}
1982/03/15
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
New Rocker Arm Assemblies Used {1102}
1982/09/13
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Front Housings On Earlier 3204 Engines Can Be Reworked To Use The Improved Oil Pump Relief Valve{1151,1304,1315}
1984/06/04
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Governor Bumper Spring Changed To Permit Better Accuracy In Rack Settings{1264}
1977/04/18
Improved Accessory Drive Housing And Support Bracket{1207,1253}
1977/08/22
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Rebuild Kit For Fuel Transfer Pump{1256}
1993/09/06
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Oversize Fuel Pump Drive Idler Shaft Available To Salvage Cylinder Block{1206}
1994/10/03
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/11/26
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Disassembly and Assembly
Fuel Priming Pump
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Transfer Pump
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Service Magazine
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Rebuild Kit For Fuel Transfer Pump{1256}
1993/09/06
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Specifications
Fuel Injection Pump Housing
3204 VEHICULAR ENGINE
Fuel Transfer Pump<BR> (4N6835)
3204 VEHICULAR ENGINE
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Disassembly and Assembly
Fuel Priming Pump
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Transfer Pump
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Fuel Injection Pump Housing And Governor
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Governor
3204 VEHICULAR ENGINE FOR D3 TRACTOR, 931 TRACK-TYPE LOADER
Service Magazine
New Rack Stop Collar{1264,1286,1257}
1982/01/25
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Oil Leakage In Governor Housing; New Seal Used{1264}
1982/03/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Governor Bumper Spring Changed To Permit Better Accuracy In Rack Settings{1264}
1977/04/18
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Rebuild Kit For Fuel Transfer Pump{1256}
1993/09/06
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Oversize Fuel Pump Drive Idler Shaft Available To Salvage Cylinder Block{1206}
1994/10/03
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Service Magazine
New Rack Stop Collar{1264,1286,1257}
1982/01/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Governor Bumper Spring Changed To Permit Better Accuracy In Rack Settings{1264}
1977/04/18
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Service Magazine
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Disassembly and Assembly
Fuel Tank
D3 & 931 TRACTOR AND LOADER POWER TRAIN AND VEHICLE SYSTEMS
Service Magazine
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Improved Kit For Ecology Drain Valve In Fuel Tank{1273}
1977/04/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
2003/12/22
Conversion Kits are Available to Convert Caterpillar or Wiggins Fast Fuel System Threaded Receivers to Caterpillar Flange Mounted Receivers {1710}
2004/03/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using 8S2305, 9S228 And 9S240 Rack Position Tool Groups{650, 1250}
Using 8S2305, 9S228 And 9S240 Rack Position Tool Groups{650, 1250}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Fuel Injection Equipment
3204 VEHICULAR ENGINE
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Four Fabricated Tools Available For Use During Service Of Fuel System Timing Gear{0621,0612,1206,1253,1207}
1980/12/22
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/01
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
New Rack Stop Collar{1264,1286,1257}
1982/01/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

Truck sale:

1987 CAT D300B
Call 
1987 CAT D300B

Picorent S.r.l
Bagnolo Piemonte, CUNEO, Italy
1988 CAT D300B
USD $26,500 
1988 CAT D300B

Performance Farms, LLC
1990 CAT D300B
USD $34,500 
1990 CAT D300B

Inland Empire Equipment
Fontana, California
1990 CAT D300B
USD $18,500 
1990 CAT D300B

Southeastern Equipment Corp
Chesapeake, Virginia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.