GASKET KITS D9G TRACK-TYPE TRACTOR

Pos.	Part No	Qty	Parts name	Comments
	9S-2704		TORQUE CONVERTER
	2P-0836		TRANSMISSION
			SERIAL NO. 66A12016 TO 66A12915 INCLUSIVE
	5P-3463		TRANSMISSION OVERHAUL
			SERIAL NO. 66A12916-UP
	3P-1223		TRANSMISSION OIL COOLER

#UEG0661S0021

6P-4890: GOVERNOR CONTROL GROUP

GOVERNOR CONTROL GROUP

6P4890 GOVERNOR CONTROL GROUP
Part of 3P5000 Sound Suppression Installation Arrangement listed on Page 92-1

c150643 UEG0661S

6P4890 GOVERNOR CONTROL GROUP Parts scheme

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-1736	[1]	KNOB
2.	6K-2392	[1]	SPACER
3.	3P-9026	[1]	SHAFT
4.	3P-9027	[1]	SPACER
5.	3P-9028	[1]	KEY
6.	3P-9025	[1]	SHAFT
7.	0T-0924	[1]	BOLT
	1B-4203	[1]	NUT
8.	3H-3243	[1]	BOLT
	3B-4505	[1]	LOCKWASHER
	4B-4277	[1]	WASHER
9.	3P-9029	[1]	KEY
10.	5M-3024	[1]	LEVER

#UEG0661S0022

4M-4913: GOVERNOR AND DECELERATOR CONTROL

GOVERNOR AND DECELERATOR CONTROL

GOVERNOR AND DECELERATOR CONTROL (4M4913 N/S)
AS VIEWED FROM RIGHT HAND SIDE OF MACHINE
Serial No. 66A12016 to 66A13162 inclusive

c141193 UEG0661S

4M4913 GOVERNOR AND DECELERATOR CONTROL Parts scheme

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2A-1736	[1]	HANDLE
4M-4036	[1]	LEVER
1B-8706	[1]	KEY
4M-4025	[1]	SPACER
2P-9482 C	[1]	LEVER ASSEM.
7M-6413	[1]	PEDAL ASSEM.
5M-8736	[1]	SUPPORT
0S-1595	[2]	BOLT
3B-4508	[2]	LOCKWASHER
4M-4030	[1]	ROD
1A-2812	[1]	WASHER
3B-4615	[1]	COTTER PIN
5B-9079	[2]	NUT
5M-2027	[2]	JOINT
4M-4026	[1]	SHAFT
1B-8706	[2]	KEY
7F-0548	[2]	WASHER
0S-1588	[4]	BOLT
3B-4506	[4]	LOCKWASHER
4M-4035	[2]	LEVER
4M-4032	[2]	BLOCK ASSEM.
4M-4012	[2]	BEARING
		(1 IN EACH BLOCK ASSEM. 4M4032)
4M-4014	[1]	SPRING
1J-4384	[2]	PIN
3B-4615	[2]	COTTER PIN
1A-9252	[1]	END
5B-9079	[1]	NUT
9H-1732	[1]	ROD
9H-3249	[1]	BEARING
		(PART OF BELLCRANK ASSEM. 4M4031)
4M-4031	[1]	BELLCRANK ASSEM.
5M-2027	[2]	JOINT
4M-4028	[1]	ROD
5B-9079	[2]	NUT
1B-4203	[4]	NUT
3B-4506	[4]	LOCKWASHER
1A-2029	[1]	BOLT
1B-9575	[2]	BOLT
3B-4505	[2]	LOCKWASHER
4M-4024	[1]	COUPLING
4M-4023	[1]	SHAFT
4M-4015	[1]	ROD ASSEM.
4M-4022	[1]	LEVER
1A-9252	[1]	END
5B-9079	[1]	NUT
1B-2886	[2]	BOLT
3B-4508	[2]	LOCKWASHER
4M-4013	[1]	LEVER
0T-0924	[1]	BOLT
1B-4203	[1]	NUT
4M-4034	[1]	SHAFT
1B-8706	[2]	KEY
4M-4039	[1]	LEVER
5M-7822	[1]	ROD
9F-6580	[1]	BOLT
4H-1382	[1]	LEVER
1J-4384	[2]	PIN
3B-4615	[2]	COTTER PIN
1A-9252	[1]	END
5B-9079	[1]	NUT
0T-0924	[1]	BOLT
1B-4203	[1]	NUT
1B-8704	[1]	KEY
5M-2027	[2]	JOINT
5B-9079	[2]	NUT
4M-4019	[1]	ROD
1B-4203	[2]	NUT
3B-4506	[2]	LOCKWASHER
1J-4384	[2]	PIN
3B-4615	[2]	COTTER PIN
4M-4020	[1]	BELLCRANK ASSEM.
8S-6948	[1]	BRACKET ASSEM.
5B-9175	[1]	SPACER
8B-2576	[1]	WASHER
3B-4628	[1]	COTTER PIN
4M-4012	[1]	BEARING
		(Part of 4M4020 Assem.)
C		INDICATES CHANGE

#UEG0661S0023

3P-7125: GOVERNOR AND DECELERATOR CONTROL GROUP

GOVERNOR AND DECELERATOR CONTROL GROUP

3P7125 GOVERNOR AND DECELERATOR CONTROL GROUP
Serial No. 66A13163-Up

c223013 UEG0661S

3P7125 GOVERNOR AND DECELERATOR CONTROL GROUP Parts scheme

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4M-4025	[1]	SPACER
2.	2P-9482	[1]	LEVER SPACER
			(Includes)
3.	6F-7048	[1]	WASHER
4.	2A-1736	[1]	KNOB
5.	9H-1732	[1]	ROD
6.	5B-9079	[5]	NUT
7.	1A-9252	[2]	END
8.	1B-0676 C	[6]	PIN
	3B-4615	[6]	COTTER PIN
9.	3D-0007	[1]	ROD
10.	1M-1341	[1]	END
11.	4M-4031	[1]	BELLCRANK ASSEM.
			(Includes)
12.	9H-3249	[1]	BEARING
13.	4M-4036	[1]	LEVER
14.	1B-8706	[3]	KEY
15.	0S-1588	[7]	BOLT
16.	3P-7119	[1]	PEDAL ASSEM.
17.	9F-7022	[1]	BOLT
	1B-4427	[1]	NUT
18.	0S-1595	[2]	BOLT
	3B-4508	[2]	LOCKWASHER
19.	3B-4506	[6]	LOCKWASHER
20.	3P-7122	[1]	ROD ASSEM.
			(Includes)
21.	4M-2372	[1]	CLIP
22.	5B-9079	[1]	NUT
23.	1M-1341	[1]	ROD END
24.	7M-9846	[1]	SPRING
25.	4M-4032	[2]	BLOCK ASSEM.
			(Each Includes)
	4M-4012	[1]	BEARING
26.	3P-7068	[1]	SHAFT
27.	7F-0548	[2]	WASHER
28.	4M-4035	[2]	LEVER
29.	3K-4290	[2]	BALLJOINT
30.	4M-4030	[1]	ROD
31.	3P-7121	[1]	LEVER ASSEM.
	6H-3956	[1]	PIN
32.	3P-7123	[1]	SUPPORT ASSEM.
33.	1B-4203	[2]	NUT
	C		INDICATES CHANGE

#UEG0661S0024

2S-8614: FUEL LINES

FUEL LINES

FUEL LINES (2S8614 N/S)

c138988 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2B-7410	[1]	PLUG
4S-8458 H	[1]	TUBE (.50"O.D.)
		(FUEL TANK TO 3S3415 TUBE)
3S-3414	[1]	TUBE (80" long)
2M-3432	[1]	GROMMET
3S-3415	[1]	TUBE (64" long)
0S-0509	[1]	BOLT (C)
3B-4506	[2]	LOCKWASHER (C)
1B-3057 C	[1]	CLIP
2P-7559 C	[1]	ANGLE ASSEM.
9F-2978	[2]	NUT
		(Part of 2P7559 Assem.)
0T-0102 C	[1]	BOLT
4B-4278 C	[1]	WASHER
1L-0480	[2]	FITTING
4H-2663	[4]	NUT
4H-2662	[4]	SLEEVE
		(2 OF EACH IN EACH FITTING IL480)
1B-8471 C	[3]	CLIP
0S-1620	[3]	BOLT
3B-4508	[3]	LOCKWASHER
2S-5100	[1]	VALVE ASSEM.
2S-5110	[1]	VALVE ASSEM.
1K-6776	[1]	PLUG
3L-3446	[1]	FITTING
4H-2663	[1]	NUT
4H-2662	[1]	SLEEVE
		(PARTS OF FITTING 3L3446)
C		INDICATES CHANGE
H		ORDER BY THE FOOT

#UEG0661S0025

5M-6580: OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR

OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR

OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR (5M6580 N/S)
Serial No. 66A12016 to 66A14172 inclusive. Additional Gauges are shown on Page 40
Refer also to Page 87 for special parts

c135274 UEG0661S

5M6580 OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR Parts scheme

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4S-9207	[1]	INDICATOR (HEAT)
8M-3163	[1]	GAUGE (FUEL PRESSURE)
3B-8989	[1]	FITTING
1F-1344	[1]	NUT
		(PART OF FITTING 3B8989)
2S-1989	[1]	GAUGE (WATER PRESSURE)
1P-8559	[1]	CONNECTOR ASSEM.
1P-8560	[1]	CONNECTOR
1P-8563	[1]	NUT
1P-8561	[1]	SLEEVE
		(PARTS OF 1P8559 ASSEM.)
0T-0102	[1]	BOLT
1D-4717	[1]	NUT
3B-4506	[1]	LOCKWASHER
4S-8385 H	[53.76IN.]	TUBE
4B-0418	[1]	CLIP
4B-6029	[1]	GROMMET
0S-0509	[1]	BOLT
3B-4506	[1]	LOCKWASHER
1F-7552	[1]	FITTING
1F-1344	[1]	NUT
		(PART OF 1F7552 FITTING)
5M-1065	[1]	GAUGE
		(LUBRICATION OIL PRESSURE)
3B-8989	[1]	FITTING
1F-1344	[1]	NUT
		(PART OF FITTING 3B8989)
1B-3057	[1]	CLIP
4B-6029	[1]	GROMMET
2B-2404	[4]	CLIP
8F-0244	[3]	GROMMET
0L-2072	[1]	CLIP
8F-0244	[1]	GROMMET
7B-7501	[1]	CLIP
4B-6029	[1]	GROMMET
5B-1959	[1]	ADAPTER
2B-5721	[1]	GASKET
1A-5350	[2]	CLIP
8F-0244	[2]	GROMMET
0S-1614	[2]	BOLT
1B-4330	[2]	NUT
3B-4504	[2]	LOCKWASHER
4S-8385 H	[1]	TUBE
		(29.60" LONG OIL PRESSURE GAUGE)
5K-0430	[1]	CLIP
8F-0244	[1]	GROMMET
H		ORDER BY THE FOOT

#UEG0661S0026

5M-6580: OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR GROUP

OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR GROUP

5M6580 OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR GROUP
Serial No. 66A14173-Up
Additional Gauges are shown on Page 40. Refer also to Page 87 for special parts

c158864 UEG0661S

5M6580 OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR GROUP Parts scheme

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-8559	[1]	CONNECTOR ASSEM.
			(Includes)
	1P-8560	[1]	CONNECTOR
	1P-8563	[1]	NUT
	1P-8561	[1]	SLEEVE
2.	2S-1989	[1]	GAUGE (water pressure)
3.	4S-9207	[1]	INDICATOR (temperature)
4.	8M-3163	[1]	GAUGE (fuel pressure)
	3B-8989	[1]	FITTING
			(Includes)
	1F-1344	[1]	NUT
5.	5M-1065	[1]	GAUGE (lube oil pressure)
	3B-8989	[1]	FITTING
			(Includes)
	1F-1344	[1]	NUT
6.	0L-2072	[1]	CLIP
7.	8F-0244	[2]	GROMMET
8.	7B-7501	[1]	CLIP
9.	4B-6029	[3]	GROMMET
10.	2B-2404	[1]	CLIP
11.	5B-1959	[1]	ADAPTER
	2B-5721	[1]	GASKET
12.	5P-1198 H		TUBE 75.18 cm(29.60 in.)
13.	3S-2093	[5]	STRAP
14.	1B-3057	[1]	CLIP
15.	5P-1198 H		TUBE 136.55 cm(53.75 in.)
16.	1F-7552	[1]	FITTING
			(Includes)
	1F-1344	[1]	NUT
17.	4B-0418	[1]	CLIP
18.	0S-0509	[1]	BOLT
	3B-4506	[1]	LOCKWASHER
	H		ORDER BY THE CENTIMETRE

#UEG0661S0027

7M-6113: BOLT GP-ENGINE MOUNTING

BOLT GP-ENGINE MOUNTING

7M6113 ENGINE MOUNTING HARDWARE GROUP

UEG0661S0027 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2B-2994	[2]	DOWEL REAR SUPPORT TO FRAME
1D-4639	[4]	BOLT REAR SUPPORT TO FRAME
7F-5227	[4]	BOLT FRONT SUPPORT TO FRAME
4H-9866	[4]	SHIM FRONT SUPPORT TO FRAME
4H-9867	[4]	SHIM FRONT SUPPORT TO FRAME
3K-5234	[4]	WASHER REAR SUPPORT TO FRAME
7M-6116	[4]	SHIM REAR SUPPORT TO FRAME
7M-6117	[4]	SHIM REAR SUPPORT TO FRAME
2S-0115	[4]	WASHER FRONT SUPPORT TO FRAME

#UEG0661S0028

WIRING DIAGRAM

WIRING DIAGRAM--24 Volt System

UEG0661S0028 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments

#UEG0661S0029

1P-4882: BATTERY AND WIRING

BATTERY AND WIRING

BATTERY AND WIRING (1P4882 N/S)--24 Volt--Part 1 of 2
Serial No. 66A12016 to 66A13770 and 66A14036-Up
8S5882 Harness parts are shown on Page 20. See Page 17 for Wiring Diagram

c117127 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8B-6678	[2]	GROMMET
2.	9S-5633	[1]	CABLE ASSEM.
	4S-8732 H		CONDUIT 26"
	1S-2244	[2]	BOOT
3.	3S-2093	[2]	TIE
	1S-4915	[2]	LINER
4.	1S-7252	[2]	TERMINAL
5.	1S-3403	[1]	CLIP
	0S-1588	[1]	BOLT
	4B-4278	[1]	WASHER
6.	5L-4507	[2]	SCREW
7.	2H-1507	[1]	CIRCUIT BREAKER
8.	7S-6402	[1]	SWITCH (Three position)
	7S-5432	[1]	KNOB
9.	8S-6891	[1]	WIRE ASSEM.
10.	1F-7240	[1]	TERMINAL
11.	7B-4826	[2]	INSULATOR
12.	6B-2864	[1]	TERMINAL
13.	1F-7307	[1]	AMMETER
14.	3S-8642	[2]	LAMP ASSEM.
	2D-1959	[1]	BULB
15.	1S-3403	[1]	CLIP
16.	1S-7786 J	[2]	BOX
17.	3B-4506	[6]	LOCKWASHER
18.	4S-6336	[1]	BUTTON
19.	5K-3546	[1]	BUTTON
20.	3B-4504	[2]	LOCKWASHER
	4B-4276	[2]	WASHER
21.	8S-7713	[1]	SWITCH ASSEM. (Heat Start)
	8F-3437	[1]	LEVER
	5L-7200	[1]	SCREW
	3B-4501	[1]	LOCKWASHER
22.	5S-8580	[1]	WIRE ASSEM.
23.	1F-7240	[2]	TERMINAL
	7B-4826	[2]	INSULATOR
24.	8S-5882 Y	[1]	HARNESS ASSEM.
			(Separate Illustration)
25.	1S-0994	[4]	CLIP
26.	0T-0102	[4]	BOLT (.625" long)
27.	0L-1351	[1]	BOLT (.875" long)
28.	1D-4717	[2]	NUT
29.	2S-3162	[1]	BRACKET
30.	2S-3196	[1]	BRACKET
	0S-1615	[2]	BOLT
	1B-4330	[2]	NUT
	J		TWO OF PART MARKED ARE REQUIRE
	Y		SEPARATE ILLUSTRATION
	H		ORDER BY THE FOOT

Information:

SERVICE EQUIPMENT AND SUPPLIES

GASKET & SEAL KITS

Truck Engine News

The Color of Certain O-Ring Seals Is Changing {7555}
2002/12/01

The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/31

Engine News

The Color of Certain O-Ring Seals Is Changing {7555}
2003/01/01

The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/22

Special Instruction

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}

Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}

Technical Information Bulletin

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Tool Operating Manual

Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}

Undercarriage Reconditioning Bulletin

Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}

Service Magazine

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01

Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18

Overlap Joint On Crankshaft Front Seal Ring Prevents Leakage{1160,1202}
1978/08/21

Improved Caterpillar O-ring Face Seals are Now Available {7555}
2000/05/08

The Color of Certain O-Ring Seals Will Change {7555}
2002/12/09

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

The 1U-8846 Gasket Sealant Is Canceled {7555}
2011/02/02

Caterpillar Parts SIS Catalog D9G :

3S-4734 AIR CLEANER INDICATOR

2P-4667 MUFFLER

3S-4734 AIR CLEANER INDICATOR

1P-7881 MUFFLER

3S-4734 AIR CLEANER INDICATOR

7N-9381 PIPE ASSEMBLY

4N-7389 AIR LINES GROUP

6P-4890 GOVERNOR CONTROL GROUP

4M-4913 GOVERNOR AND DECELERATOR CONTROL

3P-7125 GOVERNOR AND DECELERATOR CONTROL GROUP

2S-8614 FUEL LINES

5M-6580 OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR

5M-6580 OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR GROUP

7M-6113 BOLT GP-ENGINE MOUNTING

WIRING DIAGRAM

Truck sale:

Caterpillar D9G
- Crawler dozers
HOLT CAT

Caterpillar D9G, Crawler dozers, Construction
- Crawler dozers
WILLIAM ADAMS PTY. LTD.

26.828

Caterpillar D9G, Bulldozer, Bau-Und Bergbauausrüstung

USD $14,900

1971 CAT D9G

Binkley Equipment
Rochester, Minnesota

Call

1970 CAT D9G

Auto Express
RICH CREEK, Virginia