2M5796 FINAL DRIVE GROUP--Upper Half--Type 2 Serial No. 66A12746-Up D9G TRACK-TYPE TRACTOR

POWER TRAIN

DRIVE GP-FINAL

0. 2M-5796 FINAL DRIV
1. 2M-5796 FINAL DRIV

UNDERCARRIAGE

IDLER GP

2. 4M-3835 FRONT IDLE
3. 4M-3835 FRONT IDLE
4. 4M-3835 FRONT IDLE
5. 4M-3835 FRONT IDLE
6. 4M-3835 FRONT IDLE
7. 4M-3835 FRONT IDLE

FRAME GP-TRACK ROLLER

8. 4M-4001 TRACK ROLL
9. 4M-4001 TRACK ROLL
0. INFORMATION

TRACK-TYPE TRACTOR D9G TRACK-TYPE TRACTOR 66A
D9G TRACTOR 66A12016-UP (MACHINE) UEG0661S D9G 66A (1961)

POWER TRAIN

DRIVE GP-FINAL

2M-5796 FINAL DRIVE GP

#UEG0661S0130

2M-5796: FINAL DRIVE GP

FINAL DRIVE GP

2M5796 FINAL DRIVE GROUP--Upper Half--Type 2
Serial No. 66A12746-Up

c156810 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8H-4129	[2]	NUT
8P-0495 C	[2]	GASKET
2M-6984	[2]	DRUM
9H-6864	[32]	BOLT
3B-4510	[32]	LOCKWASHER
7H-2069 C	[2]	PLUG
8P-0485 C	[2]	LOCK
4H-0051 C	[2]	SPACER
0S-1589	[12]	BOLT
2S-7593	[12]	WASHER
1H-0525	[2]	DOWEL
9F-8072	[2]	OUTER RACE AND ROLLER ASSEM.
3P-6269	[2]	CAGE
		USE 7M7260 GASKET SOLUTION
9F-8073	[2]	RACE
1P-7249	[2]	SEAL GROUP
1P-7239	[4]	RING
		(2 IN EACH SEAL GROUP 3P433)
3P-2811	[2]	FLANGE
0L-1026	[2]	PLUG
8M-3735	[2]	DOWEL
4M-1653	[2]	DOWEL
		NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES
2M-8838	[2]	RACE
1M-3041	[2]	OUTER RACE AND ROLLER ASSEM.
2M-5589	[2]	PINION (18 TEETH)
C		INDICATES CHANGE

#UEG0661S0131

2M-5796: FINAL DRIVE GP

FINAL DRIVE GP

2M5796 FINAL DRIVE GROUP--Lower Half--Type 2
Serial No. 66A12746-Up

c156811 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2M-2961	[6]	GEAR (24 TEETH)
2M-5588	[2]	GEAR (86 TEETH)
2M-4550	[12]	PLATE
9M-5895	[6]	ROLLER GROUP
0S-0484	[40]	BOLT
1B-4205	[40]	NUT
2A-4465	[40]	LOCK
2M-4454	[40]	PLATE
3B-8927	[2]	DOWEL
2M-2062 R	[2]	HUB
0L-1026	[2]	PLUG
3F-1953	[2]	DOWEL
2M-1131	[2]	INNER RACE AND ROLLER ASSEM.
2M-1148	[2]	RACE (OUTER)
8M-3393	[16]	BOLT
8M-3830	[16]	WASHER
8M-2882	[8]	LOCK
6P-2267	[2]	SHAFT
4F-7387	[2]	SEAL
2M-1131	[2]	INNER RACE AND ROLLER ASSEM.
2M-1149	[2]	RACE (OUTER)
6K-1330	[3]	BOLT
2S-0115	[3]	WASHER
9S-1322	[6]	BOLT
9H-1031	[6]	WASHER
		(Parts of 6P4714 Assem.)
6P-4714 R	[2]	HUB ASSEM.
2P-1554	[2]	GEAR (75 TEETH)
6H-1717	[48]	BOLT
2A-4465	[24]	LOCK
2M-8766	[24]	PLATE
2A-1538	[66]	BOLT
2S-0115	[66]	WASHER
3P-4665	[1]	CASE (RIGHT HAND)
3P-4666	[1]	CASE (LEFT HAND)
2P-9095 C	[2]	GUARD
1S-0454	[12]	BOLT
3B-4514	[12]	LOCKWASHER
2M-4478	[2]	RETAINER
0L-1026	[2]	PLUG
2M-2105	[6]	HUB
1A-3284	[2]	PIN
3P-4867	[2]	RETAINER
0S-1585	[28]	BOLT
3B-4508	[28]	LOCKWASHER
5P-0991 R	[4]	SEAL GROUP
4M-0736	[2]	SEAL
		(PART OF 5P991 ASSEM.)
7S-6104	[2]	GEAR (27 teeth)
2M-1156	[2]	INNER RACE AND ROLLER ASSEM.
2M-1157	[2]	RACE (outer)
7S-1579	[2]	NUT
7S-7646	[2]	LOCK
3P-4667	[2]	SUPPORT
2K-2834	[2]	KEY
2M-2150	[2]	NUT
2M-4450	[2]	LOCK
1B-3942	[2]	CUP
4M-2552	[2]	CONE
5F-2465	[2]	CUP
7M-5334	[2]	CONE
2B-7558	[4]	CORK
3F-5920	[2]	CUP
4M-1552	[2]	CONE
0S-0509	[8]	BOLT
0L-0364	[8]	LOCK
2M-1126	[2]	SEAL
2M-1129	[2]	CAP
2M-2941	[2]	NUT
2M-4470	[2]	LOCK
1A-1135	[16]	BOLT
3B-4510	[16]	LOCKWASHER
0S-0509	[8]	BOLT
7S-1581	[4]	LOCK
2M-4488	[2]	WASHER
3P-4865	[2]	SPROCKET GROUP
3P-4866	[1]	HUB
5P-0233	[27]	BOLT
2M-5656	[27]	NUT
2P-9446	[9]	SEGMENT
		(Use With Sealed and Lubricated Track)
		(Parts of 3P4865 Group)
3S-7460 H	[18]	SEGMENT
		(Use With Sealed and Non-Lubricated Track)
H		NOT PART OF FINAL DRIVE
R		REMFG PART MAY BE AVAILABLE
C		INDICATES CHANGE

#UEG0661S0132

4M-3835: FRONT IDLER

FRONT IDLER

FRONT IDLER (4M3835 N/S)--Part 1 of 2
Serial No. 66A12016 to 66A12844 inclusive

c117780 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-5242	[2]	PLATE
7B-3028	[8]	SCREW
2S-5927	[2]	PLATE
7B-3028	[8]	SCREW
		(1/2 OF EACH IN EACH ROD GROUP 2S5929)
2S-5926	[2]	VALVE
5M-6708	[2]	WASHER
2S-5925	[2]	VALVE
5M-6708	[2]	WASHER
1D-4625	[16]	BOLT
3B-4514	[16]	LOCKWASHER
5M-7701	[2]	CYLINDER
0S-1575	[12]	BOLT
1B-4207	[12]	NUT
3B-4512	[12]	LOCKWASHER
9S-1613	[1]	GUARD (RIGHT HAND)
9S-1614	[1]	GUARD (LEFT HAND)
5S-1532	[2]	IDLER ASSEM
4M-1605	[2]	YOKE ASSEM
2S-5929	[2]	ROD GROUP
1D-4635	[2]	BOLT
5H-6737	[2]	WASHER
4F-5003	[12]	SPRING ASSEM.
4B-1398	[12]	PLATE
3B-2968	[8]	BOLT
3B-4512	[12]	LOCKWASHER
1D-4609	[4]	BOLT
1H-8501	[4]	SPACER
1J-6775	[8]	BOLT
3B-4520	[8]	LOCKWASHER
2P-0347 C	[2]	PLUG
1S-8947 C	[2]	SEAL
1B-2886	[4]	BOLT
3B-4508	[4]	LOCKWASHER
1S-3513	[4]	LOCK
6J-1536 C	[16]	BOLT
3B-4514	[16]	LOCKWASHER
4M-5023	[8]	STRIP
C		INDICATES CHANGE

#UEG0661S0133

4M-3835: FRONT IDLER

FRONT IDLER

FRONT IDLER (4M3835 N/S)--Part 2 of 2
Serial No. 66A12016 to 66A12844 inclusive

c158208 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2M-6085	[2]	SPRING (OUTER)
8H-1350	[2]	PLATE
9S-8218	[2]	BOLT
0S-1624	[2]	BOLT
0L-0695	[2]	WASHER
9S-8216	[2]	NUT
3S-6162 C	[2]	WASHER
5H-6730	[2]	SPRING (INNER)
5H-6727	[2]	PIPE ASSEM.
1M-0142	[4]	BUSHING (INNER)
		(1 IN EACH BUSHING ASSEM. 8H5634)
2H-3935	[4]	SEAL
1A-1460	[24]	BOLT
3B-4508	[24]	LOCKWASHER
2H-3931	[4]	SEAL
1S-3511	[2]	BEARING
		(R. H. INNER-L. H. OUTER)
4M-2623	[2]	GUIDE
		(R. H. INNER-L. H. OUTER)
1S-3514	[2]	SHAFT
9S-1612 C	[90]	SHIM
1M-8748 R	[4]	SEAL GROUP
6H-1309	[8]	SEAL (RUBBER)
		(2 IN EACH SEAL GROUP 1M8748)
8H-5634	[4]	BUSHING ASSEM.
9B-2289	[8]	PIN
		(2 IN EACH BUSHING ASSEM. 8H5634)
9S-1617	[2]	GUIDE ASSEM.
		(R.H. OUTER - L.H. INNER)
6H-6270	[4]	RING
1P-8096	[2]	SEAL
5M-3374	[2]	SEAL
5M-3373	[2]	RING
2D-0830	[2]	RING
4M-4932	[2]	PISTON
1P-4880	[2]	SEAL
1P-3358	[2]	BEARING
2K-5965	[2]	RING
		(1 OF EACH IN EACH 1P8275 ASSEM.)
5H-6731	[2]	PLUG
5M-4454	[2]	SEAL
1P-8275	[2]	COVER ASSEM.
2M-6074	[2]	PILOT
7F-5227	[8]	BOLT
3B-4512	[8]	LOCKWASHER
2M-3509	[28]	SHIM
1S-3512	[2]	BEARING
		(R.H. OUTER L.H. INNER)
4M-2624	[2]	GUIDE
		(R.H. OUTER L.H. INNER)
9H-2036	[4]	PLATE ASSEM.
9H-0372	[12]	PIN
		(3 IN EACH PLATE ASSEM. 9H2036)
3P-2738 C	[4]	STRIP
		(1 in each Guide Assem. 9S1617 & 9S1618)
9S-1618	[2]	GUIDE ASSEM.
		(R H INNER L.H. OUTER)
C		INDICATES CHANGE
R		REMFG PART MAY BE AVAILABLE

#UEG0661S0134

4M-3835: FRONT IDLER

FRONT IDLER

FRONT IDLER (4M3835 N/S)--Part 1 of 2 - Type 1
Serial No. 66A12845-Up

c147602 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-5242	[2]	PLATE
7B-3028	[8]	SCREW
2S-5927	[2]	PLATE
7B-3028	[8]	SCREW
		(1/2 OF EACH IN EACH ROD GROUP 2S5929)
2S-5926	[2]	VALVE
5M-6708	[2]	WASHER
2S-5925	[2]	VALVE
5M-6708	[2]	WASHER
1D-4625	[16]	BOLT
3B-4514	[16]	LOCKWASHER
5M-7701	[2]	CYLINDER
0S-1575	[12]	BOLT
1B-4207	[12]	NUT
3B-4512	[12]	LOCKWASHER
9S-1613	[1]	GUARD (RIGHT HAND)
9S-1614	[1]	GUARD (LEFT HAND)
5S-1532	[2]	IDLER ASSEM
4M-1605	[2]	YOKE ASSEM
2S-5929	[2]	ROD GROUP
1D-4635	[2]	BOLT
5H-6737	[2]	WASHER
4F-5003	[12]	SPRING ASSEM.
4B-1398	[12]	PLATE
3B-2968	[8]	BOLT
3B-4512	[12]	LOCKWASHER
1D-4609	[4]	BOLT
1H-8501	[4]	SPACER
1J-6775	[8]	BOLT
3B-4520	[8]	LOCKWASHER
2P-0347	[2]	PLUG
1S-8947	[2]	SEAL
1B-2886	[4]	BOLT
3B-4508	[4]	LOCKWASHER
1S-3513	[4]	LOCK
6J-1536	[16]	BOLT
3B-4514	[16]	LOCKWASHER
4M-5023	[8]	STRIP

#UEG0661S0135

4M-3835: FRONT IDLER

FRONT IDLER

FRONT IDLER (4M3835 N/S)--Part 2 of 2-Type 1
Serial No. 66A12845-Up

c158209 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
3P-4435 C	[2]	SPRING (OUTER)
3P-4567 C	[2]	PLATE
3P-4433 C	[2]	BOLT
0S-1583 C	[2]	BOLT
1K-3147 C	[2]	WASHER
7B-9744 C	[2]	NUT
1D-0503 C	[2]	WASHER
3P-4434 C	[2]	SPRING (INNER)
3P-4430 C	[2]	PIPE ASSEM
1M-0142	[4]	BUSHING (INNER)
		(1 IN EACH BUSHING ASSEM 8H5634)
2H-3935	[4]	SEAL
1A-1460	[24]	BOLT
3B-4508	[24]	LOCKWASHER
2H-3931	[4]	SEAL
1S-3511	[2]	BEARING
		(R.H. INNER-L.H. OUTER)
4M-2623	[2]	GUIDE
		(R.H. INNER-L.H. OUTER)
1S-3514	[2]	SHAFT
9S-1612	[90]	SHIM
1M-8748 R	[4]	SEAL GROUP
6H-1309	[8]	SEAL (RUBBER)
		(2 IN EACH SEAL GROUP 1M8748)
8H-5634	[4]	BUSHING ASSEM
9B-2289	[8]	PIN
		(2 IN EACH BUSHING ASSEM. 8H5634)
9S-1617	[2]	GUIDE ASSEM
		(R.H. OUTER - L.H. INNER)
6H-6270	[4]	RING
6P-8480 C	[2]	COVER ASSEM.
6P-4350	[2]	PLATE (warning)
4B-4158	[8]	SCREW
		(1/2 of each in each 6P8480 Assem.)
5M-3374	[2]	SEAL
5M-3373	[2]	RING
2D-0830	[2]	RING
3P-4695 C	[2]	PISTON
1P-4880	[2]	SEAL
1P-8096	[2]	SEAL
1P-3358	[2]	BEARING
2K-5965	[4]	RING
		(1/2 of each in each 6P8480 Assem.)
5M-4454	[2]	SEAL
3P-4432 C	[1]	PILOT ASSEM.
4B-8945	[1]	PIN
		(Part of 3P4432 Assem.)
3P-4488 C	[2]	SLEEVE
7F-5227	[8]	BOLT
3B-4512	[8]	LOCKWASHER
2M-3509	[28]	SHIM
1S-3512	[2]	BEARING
		(R.H. OUTER-L.H. INNER)
4M-2624	[2]	GUIDE
		(R.H. OUTER-L.H. INNER)
9H-2036	[4]	PLATE ASSEM
9H-0372	[12]	PIN
		(3 IN EACH PLATE ASSEM 9H2036)
3P-2738	[4]	STRIP
		(1 in each Guide Assem. 9S1617 & 9S1618)
9S-1618	[2]	GUIDE ASSEM
		(R H INNER - L H OUTER)
C		INDICATES CHANGE
R		REMFG PART MAY BE AVAILABLE

#UEG0661S0136

4M-3835: FRONT IDLER GROUP

FRONT IDLER GROUP

4M3835 FRONT IDLER GROUP--Part 1 of 2--Type 2
Serial No. 66A12845-Up

c160064 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-5242	[2]	PLATE
7B-3028	[8]	SCREW
2S-5927	[2]	PLATE
7B-3028	[8]	SCREW
		(1/2 OF EACH IN EACH ROD GROUP 8P5352)
2S-5926	[2]	VALVE
5M-6708	[2]	WASHER
2S-5925	[2]	VALVE
5M-6708	[2]	WASHER
1D-4625	[16]	BOLT
3B-4514	[16]	LOCKWASHER
5M-7701	[2]	CYLINDER
9S-1364 C	[12]	BOLT
1B-4207	[12]	NUT
3B-4512	[12]	LOCKWASHER
9S-1613	[1]	GUARD (RIGHT HAND)
9S-1614	[1]	GUARD (LEFT HAND)
5S-1532	[2]	IDLER ASSEM
4M-1605	[2]	YOKE ASSEM
8P-5352 C	[2]	ROD GROUP
1D-4635	[2]	BOLT
5H-6737	[2]	WASHER
4F-5003	[12]	SPRING ASSEM
4B-1398	[12]	PLATE
3B-2968	[8]	BOLT
3B-4512	[12]	LOCKWASHER
1D-4609	[4]	BOLT
1H-8501	[4]	SPACER
1J-6775	[8]	BOLT
3B-4520	[8]	LOCKWASHER
2P-0347	[2]	PLUG
1S-8947	[2]	SEAL
1B-2886	[4]	BOLT
3B-4508	[4]	LOCKWASHER
1S-3513	[4]	LOCK
6J-1536	[16]	BOLT
3B-4514	[16]	LOCKWASHER
4M-5023	[8]	STRIP
C		INDICATES CHANGE

#UEG0661S0137

4M-3835: FRONT IDLER GROUP

FRONT IDLER GROUP

4M3835 FRONT IDLER GROUP--Part 2 of 2--Type 2
Serial No. 66A12845-Up

c158209 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
3P-4435 C	[2]	SPRING (OUTER)
3P-4567 C	[2]	PLATE
3P-4433 C	[2]	BOLT
0S-1583 C	[2]	BOLT
1K-3147 C	[2]	WASHER
7B-9744 C	[2]	NUT
1D-0503 C	[2]	WASHER
3P-4434 C	[2]	SPRING (INNER)
3P-4430 C	[2]	PIPE ASSEM
1M-0142	[4]	BUSHING (INNER)
		(1 IN EACH BUSHING ASSEM 8H5634)
2H-3935	[4]	SEAL
1A-1460	[24]	BOLT
3B-4508	[24]	LOCKWASHER
2H-3931	[4]	SEAL
1S-3511	[2]	BEARING
		(R.H. INNER-L.H. OUTER)
4M-2623	[2]	GUIDE
		(R.H. INNER-L.H. OUTER)
1S-3514	[2]	SHAFT
9S-1612	[90]	SHIM
1M-8748 R	[4]	SEAL GROUP
6H-1309	[8]	SEAL (RUBBER)
		(2 IN EACH SEAL GROUP 1M8748)
8H-5634	[4]	BUSHING ASSEM
9B-2289	[8]	PIN
		(2 IN EACH BUSHING ASSEM. 8H5634)
9S-1617	[2]	GUIDE ASSEM
		(R.H. OUTER - L.H. INNER)
6H-6270	[4]	RING
6P-8480 C	[2]	COVER ASSEM.
6P-4350	[2]	PLATE (warning)
4B-4158	[8]	SCREW
		(1/2 of each in each 6P8480 Assem.)
5M-3374	[2]	SEAL
5M-3373	[2]	RING
2D-0830	[2]	RING
3P-4695 C	[2]	PISTON
1P-4880	[2]	SEAL
1P-8096	[2]	SEAL
1P-3358	[2]	BEARING
2K-5965	[4]	RING
		(1/2 of each in each 6P8480 Assem.)
5M-4454	[2]	SEAL
3P-4432 C	[1]	PILOT ASSEM.
4B-8945	[1]	PIN
		(Part of 3P4432 Assem.)
3P-4488 C	[2]	SLEEVE
7F-5227	[8]	BOLT
3B-4512	[8]	LOCKWASHER
2M-3509	[28]	SHIM
1S-3512	[2]	BEARING
		(R.H. OUTER-L.H. INNER)
4M-2624	[2]	GUIDE
		(R.H. OUTER-L.H. INNER)
9H-2036	[4]	PLATE ASSEM
9H-0372	[12]	PIN
		(3 IN EACH PLATE ASSEM 9H2036)
3P-2738	[4]	STRIP
		(1 in each Guide Assem. 9S1617 & 9S1618)
9S-1618	[2]	GUIDE ASSEM
		(R H INNER - L H OUTER)
C		INDICATES CHANGE
R		REMFG PART MAY BE AVAILABLE

#UEG0661S0138

4M-4001: TRACK ROLLER FRAME

TRACK ROLLER FRAME

TRACK ROLLER FRAME (4M4001 N/S)
Serial No. 66A12016 to 66A12289 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
Note: 1P8319 Track Roller Frame and Support Arrangement, to provide replacement of complete
Undercarriage, including Equalizer Bar Supports minus Track, is available

c138043 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
3B-8490	[2]	FITTING
4H-9342	[2]	SHELL
7J-5673 C	[4]	SEAL
5H-5626	[2]	GASKET
0S-1594	[10]	BOLT
3B-4506	[10]	LOCKWASHER
7S-5323	[4]	SHIM (.010 in. thick)
7S-5324	[4]	SHIM (.005 in. thick)
7S-5325	[2]	SHIM (.003 in. thick)
6H-1628	[4]	BOLT
3S-7023	[4]	WASHER
4S-8940	[2]	CAP
		(1/2 of each in each Frame Assem. 8S5277 & 7S7900)
9M-6746	[1]	GUARD ASSEM. (R.H. Rear)
		(Part of 8S5277 Assem.)
9M-6745	[1]	GUARD ASSEM. (L.H. Rear)
		(Part of 7S7900 Assem.)
7M-6469	[4]	NUT
		2 in each 9M6746 & 9M6745 Assem.)
8S-5277 C	[1]	FRAME ASSEM. (R.H.)
7S-7900	[1]	FRAME ASSEM. (L.H.)
8S-5811	[1]	BRACE ASSEM.
		(Part of 8S5277 Assem.)
8S-5812	[1]	BRACE ASSEM.
		(Part of 7S7900 Assem.)
1B-5170	[2]	PLUG
1D-4640	[56]	BOLT
3K-5234	[56]	WASHER
2B-7583	[24]	CORK
8S-5266 C	[1]	PLATE
		(PART OF FRAME ASSEM. 8S5277)
7M-4515	[2]	CORK
2M-6926	[2]	PLATE ASSEM.
9M-6744	[1]	STRIP
		(RIGHT HAND REAR)
9M-6743	[1]	STRIP
		(LEFT HAND REAR)
9M-6745	[1]	GUARD ASSEM. (R.H. Outer)
9M-6746	[1]	GUARD ASSEM. (R.H. Inner)
		(Parts of 8S5277 Assem.)
9M-6745	[1]	GUARD ASSEM. (L.H. Inner)
9M-6746	[1]	GUARD ASSEM. (L.H. Outer)
		(Parts of 7S7900 Assem.)
7M-6469	[8]	NUT
		(2 in each 9M6745 & 9M6746 Assem.)
9M-6744	[2]	STRIP
		(R.H. Inner L.H. Outer)
9M-6743	[2]	STRIP
		(RIGHT HAND OUTER-LEFT HAND INNER)
1D-4626	[24]	BOLT
3B-4514	[24]	LOCKWASHER
7M-5346	[4]	GUIDE ASSEM.
		(2 in each 8S5277 & 7S7900 Assem.)
4M-1619	[4]	STRIP
		(1 in each 7M5346 Assem.)
8M-8930	[4]	BRACKET
1D-4709	[16]	BOLT
3B-4516	[16]	LOCKWASHER
0T-0603	[8]	BOLT
3B-4514	[8]	LOCKWASHER
C		INDICATES CHANGE

#UEG0661S0139

4M-4001: TRACK ROLLER FRAME

TRACK ROLLER FRAME

TRACK ROLLER FRAME (4M4001 N/S)
Serial No. 66A12290 to 66A12844 inclusive. Note: Quantities shown are those required for both R.H. and L.H. sides
Note: 1P8319 Track Roller Frame and Support Arrangement, to provide replacement of complete
Undercarriage, including Equalizer Bar Supports minus Track, is available

c117756 UEG0661S

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
3B-8487 C	[2]	FITTING
4H-9342	[2]	SHELL
7J-5673	[4]	SEAL
9S-9492	[1]	GUARD
		(Part of 3P1497 Assem.)
5H-5626	[2]	GASKET
0S-1594	[10]	BOLT
3B-4506	[10]	LOCKWASHER
7S-5323	[4]	SHIM (.010 in. thick)
7S-5324	[4]	SHIM (.005 in. thick)
7S-5325	[2]	SHIM (.003 in. thick)
6H-1628	[4]	BOLT
3S-7023	[4]	WASHER
4S-8940	[2]	CAP
		(1/2 of each in each frame Assem. 3P1497 & 3P1498)
9M-6746	[1]	GUARD ASSEM. (R.H. Rear)
		(Part of 3P1497 Assem.)
9M-6745	[1]	GUARD ASSEM. (L.H. Rear)
		(Part of 3P1498 Assem.)
7M-6469	[4]	NUT
		2 in each 9M6746 & 9M6745 Assem.)
3P-1497 C	[1]	FRAME ASSEM. (R.H.)
3P-1498 C	[1]	FRAME ASSEM. (L.H.)
9S-9491	[1]	PLATE
7S-4783	[1]	BOSS
		(Parts of 3P1497 Assem.)
3P-1807	[1]	BRACE ASSEM.
		(Part of 3P1497 Assem.)
3P-1808	[1]	BRACE ASSEM.
		(Part of 3P1498 Assem.)
1B-5174 C	[2]	PLUG
1D-4640	[56]	BOLT
3K-5234	[56]	WASHER
2B-7583	[24]	CORK
7M-4515	[2]	CORK
2M-6926	[2]	PLATE ASSEM.
9M-6744	[1]	STRIP
		(RIGHT HAND REAR)
9M-6743	[1]	STRIP
		(LEFT HAND REAR)
9M-6745	[1]	GUARD ASSEM. (R.H. Outer)
9M-6746	[1]	GUARD ASSEM. (R.H. Inner)
		(Parts of 3P1497 Assem.)
9M-6745	[1]	GUARD ASSEM. (L.H. Inner)
9M-6746	[1]	GUARD ASSEM. (L.H. Outer)
		(Parts of 3P1498 Assem.)
7M-6469	[8]	NUT
		(2 in each 9M6745 & 9M6746 Assem.)
9M-6744	[2]	STRIP
		(R.H. Inner L.H. Outer)
9M-6743	[2]	STRIP
		(RIGHT HAND OUTER-LEFT HAND INNER)
1D-4626	[24]	BOLT
9H-1031 C	[24]	WASHER
7M-5346	[4]	GUIDE ASSEM.
		(2 in each 3P1497 & 3P1498 Assem.)
4M-1619	[4]	STRIP
		(1 in each 7M5346 Assem.)
8M-8930	[4]	BRACKET
1D-4709	[16]	BOLT
3B-4516	[16]	LOCKWASHER
0T-0603	[8]	BOLT
3B-4514	[8]	LOCKWASHER
C		INDICATES CHANGE

Information:

POWER TRAIN

DRIVE GP-FINAL

Special Instruction

Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}
Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}

Installation Of 8P7639 Planet Gears{4050}
Installation Of 8P7639 Planet Gears{4050}

Installation Of 3T9446 Final Drive Lubrication Reservoir{4050}
Installation Of 3T9446 Final Drive Lubrication Reservoir{4050}

Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Caterpillar Track Type Tractor (D9 - D11) Technician Checklist<BR>Final Drive, Steering Clutch, and Brake Removal and Installation{0372, 0374, 4050, 4050, 4101, 4101, 4251, 4251}
Caterpillar Track Type Tractor (D9 - D11) Technician Checklist
Final Drive, Steering Clutch, and Brake Removal and Installation{0372, 0374, 4050, 4050, 4101, 4101, 4251, 4251}

Tool Operating Manual

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}

Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}

Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}

Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}

Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}

Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Service Magazine

Improved Final Drive Lubrication Reservoir Assembly{4050,4070}
1982/06/14

New Bearing Used For Planet Gear In Final Drive Group-Revision Of Article With The Same Title In The Service Magazine July 12, 1976, Page 11{4050}
1977/08/08

Magnetic Plug Gives A Visual Indication Of Possible Final Drive Damage{4059}
1978/09/25

Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog D9G :

2M-5796 FINAL DRIVE GP

4M-3835 FRONT IDLER

4M-3835 FRONT IDLER GROUP

4M-4001 TRACK ROLLER FRAME

Truck sale:

Caterpillar D9G
- Crawler dozers
HOLT CAT

Caterpillar D9G, Crawler dozers, Construction
- Crawler dozers
WILLIAM ADAMS PTY. LTD.

26.828

Caterpillar D9G, Bulldozer, Bau-Und Bergbauausrüstung

USD $14,900

1971 CAT D9G

Binkley Equipment
Rochester, Minnesota

Call

1970 CAT D9G

Auto Express
RICH CREEK, Virginia