8K4959 CLAMSHELL ACTUATOR ARRANGEMENT FOR USE WITH HOE STICK ARRANGEMENTS AN ATTACHMENT 225 EXCAVATOR

Part No	Qty	Parts name
8J-8401 Y	[1]	CYLINDER AND VALVE GROUP
8K-1472 Y	[1]	LINES GROUP
		- OR -
3V-4747 Y	[1]	LINES GROUP
8K-4858 Y	[1]	ADAPTER GROUP
		- OR -
3V-8884 Y	[1]	ADAPTER GROUP
1V-7096 Y	[1]	LINKAGE GROUP
5P-5156	[1]	FILM LUBRICANT
		ON INSIDE OF CAB DOOR ADJACENT TO STANDARD LUBRICANT FILM
5P-5309	[1]	FILM WARNING
		ON INSIDE WALL OF CAB
5P-5433	[1]	FILM CLAM ROTATION INSTRUCTION
		MOUNT ON R.H. WINDOW POST 205 MM BELOW HOLE FOR WIRE
Y		SEPARATE ILLUSTRATION

#UEG0663S0411

8K-1485: CLAMSHELL ROTATOR ARRANGEMENT

CLAMSHELL ROTATOR ARRANGEMENT

8K1485 CLAMSHELL ROTATOR ARRANGEMENT
FOR USE WITH 8K4959 CLAMSHELL ACTUATOR ARRANGEMENT, 2V258 OR 2V3171
BOOM ROTATOR LINES GROUP, 2V282, 2V3170 OR 2V3169 STICK ROTATOR LINES
GROUP

UEG0663S0411 UEG0663S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9J-5435 Y	[1]	ROTATOR GROUP
8K-1486 Y	[1]	ROTATOR LINES GROUP
8K-1478 Y	[1]	VALVE MOUNTING GROUP
1V-2658 Y	[1]	MOUNTING & CONTROL GROUP
Y		SEPARATE ILLUSTRATION

#UEG0663S0412

3G-5860: SWIVEL & ROTATOR AR

SWIVEL & ROTATOR AR

3G5860 ROTATOR SWIVEL ARRANGEMENT
FOR USE WITH 8K4959 CLAMSHELL ACTUATOR ARRANGEMENT LISTED ON
PAGE 180B. 9J5448 Gerotor parts are shown on Page 180E. AN ATTACHMENT

c223959 UEG0663S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2J-0564	[1]	NUT
2.	9J-7248	[1]	COVER
3.	9J-7734	[1]	GEAR (64 teeth)
4.	3J-5390	[1]	PLUG
5.	0S-1588	[14]	BOLT
6.	5M-2894	[22]	WASHER
7.	8J-7452	[1]	SEAL
	8J-7451	[1]	RING
8.	8J-7423	[2]	BEARING
9.	8J-7422	[1]	RETAINER
10.	7K-9220	[4]	SEAL
11.	2H-9247	[5]	SEAL (outer)
	8J-7453	[5]	SEAL (inner)
12.	9J-5004	[1]	HOUSING
13.	8J-7454	[1]	SEAL
14.	9J-4987	[1]	SWIVEL
15.	3B-8489	[2]	FITTING
16.	9J-5451	[1]	HOUSING ASSEM.
			(Includes)
17.	2F-3124	[2]	DOWEL
18.	0T-0200	[1]	PLUG
19.	8J-7424	[2]	BEARING
20.	7J-9745	[2]	BEARING
21.	7K-9205	[2]	SEAL
22.	7M-7260		GASKET SOLUTION
23.	9J-5434	[1]	GUARD ASSEM
24.	6H-1717	[4]	BOLT
	8M-4791	[4]	WASHER
25.	9J-5448 Y	[1]	MOTOR GROUP
			(Separate Illustration)
26.	031-4028	[2]	BOLT
	3G-1712	[2]	WASHER
27.	5P-2569	[1]	SEAL
28.	3G-1139	[1]	KEY
29.	9J-7274	[1]	SHIM PACK 1.01 mm(.040 in.)
30.	0L-2070	[6]	BOLT
31.	8H-7521	[1]	SEAL
32.	9J-7736	[1]	GEAR (17 teeth)
33.	9J-7247	[1]	CAGE
34.	3D-9126	[2]	CUP
	3D-9125	[2]	CONE
35.	0L-1351	[2]	BOLT
	Y		SEPARATE ILLUSTRATION

#UEG0663S0413

1V-2658: MOUNTING AND CONTROL GROUP

MOUNTING AND CONTROL GROUP

1V2658 MOUNTING AND CONTROL GROUP
Part of 8K1485 Clamshell Rotator Arrangement listed on Page 180B
AN ATTACHMENT

c206830 UEG0663S

1V2658 MOUNTING AND CONTROL GROUP Parts scheme

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1V-2684	[1]	SUPPORT ASSEM. (R.H.)
2.	1V-2668	[1]	PEDAL ASSEM. (R.H.)
3.	3B-4627	[2]	COTTER PIN
4.	3B-9363	[2]	WASHER
5.	1J-4384	[2]	PIN
6.	3B-4615	[3]	COTTER PIN
7.	4B-4278	[15]	WASHER
8.	5B-9079	[5]	NUT
9.	4J-8922	[2]	ROD END
10.	1A-2029	[4]	BOLT
11.	3B-4506	[11]	LOCKWASHER
12.	0S-1588	[4]	BOLT
13.	1V-2677	[1]	LEVER
14.	1H-1200	[3]	PIN
15.	0S-1594	[2]	BOLT
	2K-4973	[2]	LOCKNUT
16.	1V-2683	[1]	SUPPORT ASSEM. (L.H.)
17.	1V-2667	[1]	PEDAL ASSEM. (L.H.)
18.	1V-2680	[2]	ROD
19.	3K-4290	[3]	BALLJOINT ASSEM.
20.	1V-2673	[1]	LEVER ASSEM.
21.	1V-2678	[1]	ROD ASSEM.
22.	6J-3335	[1]	PIN
23.	1V-2679	[1]	SHAFT
24.	2B-2695	[4]	BOLT
	1D-4716	[4]	NUT
	3B-4505	[4]	LOCKWASHER
25.	1A-9579	[2]	BOLT
		[2]	NUT
26.	1V-2685	[1]	SUPPORT ASSEM.
			(Includes)
27.	4K-9097	[2]	NUT
28.	1V-2674	[1]	LEVER ASSEM.
29.	1V-2662	[2]	BEARING

#UEG0663S0414

9J-5435: ROTATOR GP-CLAM SHELL

ROTATOR GP-CLAM SHELL

9J5435 CLAMSHELL ROTATOR GROUP
Part of 8K1485 Clamshell Rotator Arrangement listed on Page 180B
9J5448 Motor parts are shown on Page 180E. AN ATTACHMENT

c211730 UEG0663S

9J5435 ROTATOR GP-CLAM SHELL Parts scheme

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9J-7734	[1]	GEAR (64 teeth)
2.	9J-5448 Y	[1]	MOTOR GROUP
			(Separate Illustration)
3.	0S-1595	[4]	BOLT
	3B-4508	[4]	LOCKWASHER
	4B-4280	[4]	WASHER
4.	9J-5434	[1]	GUARD ASSEM.
5.	031-4028 C	[2]	BOLT
	3G-1712	[2]	WASHER
6.	5P-2569 C	[1]	SEAL
7.	9J-7736	[1]	GEAR (17 teeth)
8.	9J-7274	[1]	SHIMPACK
9.	3D-9126	[2]	CUP
	3D-9125	[1]	CONE
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#UEG0663S0415

9J-5448: MOTOR GP-GEROTOR

MOTOR GP-GEROTOR

9J5448 GEROTOR MOTOR GROUP
Part of 3G5860 Rotator Swivel Arrangement and 9J5435 Clamshell Rotator Group
shown on Pages 180B-1 and 180D

c208117 UEG0663S

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9J-5532	[1]	SHAFT
2.	3G-1286	[1]	SEAL-LIP TYPE
3.	9J-5685	[1]	BEARING
4.	2D-0598	[1]	SEAL-O-RING
5.	9J-5628	[1]	FLANGE-MOUNTING
6.	033-6039	[1]	SEAL-O-RING
7.	9J-5684	[1]	PLUG
8.	9J-5377	[1]	DRIVE-MOTOR
9.	9J-5683	[1]	HOUSING
10.	9J-5627	[1]	PLATE
11.	9J-9382	[1]	GEROTOR SET
12.	9J-4797	[1]	SPACER
13.	9J-5686	[4]	SEAL-O-RING
14.	9J-5171	[1]	DRIVE-MOTOR
15.	9J-9815	[1]	GEROTOR SET
16.	3G-1151	[7]	BOLT-12 POINT HEAD
	3G-1154	[7]	WASHER-SEAL
17.	9J-5629	[1]	SPACER
18.	9J-5625	[1]	COVER
19.	3G-1149	[4]	BOLT-12 POINT HEAD
	3F-9556	[4]	LOCKWASHER
20.	9J-5626	[1]	RACE
21.	9J-5640	[1]	SEAL

#UEG0663S0416

8K-4980: CLAMSHELL EXTENSION GROUP

CLAMSHELL EXTENSION GROUP

8K4980 CLAMSHELL EXTENSION GROUP
FOR USE WITH 8K4959 CLAMSHELL ACTUATOR ARRANGEMENT. This extension
increases digging depth by 1200 mm (4 Feet) and can be used with 8K4981
Extension Group if additional extension is required. AN ATTACHMENT

c206392 UEG0663S

8K4980 CLAMSHELL EXTENSION GROUP Parts scheme

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8K-4927	[2]	HOSE ASSEM. 12.5 dm(49.21 in.)
2.	1D-4626	[12]	BOLT
3.	1B-4332	[24]	NUT
	3B-4514	[24]	LOCKWASHER
4.	1P-5766	[8]	FLANGE
5.	0T-0768	[8]	BOLT
6.	4B-4279	[16]	WASHER
7.	8K-4930	[1]	EXTENSION ASSEM.
8.	1D-4625	[12]	BOLT
9.	8K-4857	[1]	ADAPTER
10.	1P-3703	[4]	SEAL
11.	8K-4977	[2]	PLATE
12.	0T-0319	[8]	BOLT

#UEG0663S0417

8K-4981: CLAMSHELL EXTENSION GROUP

CLAMSHELL EXTENSION GROUP

8K4981 CLAMSHELL EXTENSION GROUP
FOR USE WITH 8K4980 CLAMSHELL EXTENSION GROUP. This extension
increases digging depth in multiples of 1000 mm (3.3 Feet) AN ATTACHMENT

c206391 UEG0663S

8K4981 CLAMSHELL EXTENSION GROUP Parts scheme

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8K-4926	[2]	HOSE ASSEM. 10.1 dm(39.76 in.)
2.	1D-4625	[12]	BOLT
	1B-4332	[12]	NUT
	3B-4514	[12]	LOCKWASHER
3.	8K-4978	[2]	PLATE
4.	0T-0768	[16]	BOLT
	4B-4279	[16]	WASHER
5.	1P-5766	[8]	FLANGE
6.	8K-4930	[1]	EXTENSION ASSEM.
7.	1P-3703	[4]	SEAL

#UEG0663S0418

3V-8886: EXTENSION GP-CLAMSHELL

EXTENSION GP-CLAMSHELL

3V8886 CLAMSHELL EXTENSION GROUP
FOR USE WITH 3V8887 CLAMSHELL EXTENSION GROUP SHOWN ON PAGE 180G-2
This extension increases digging depth in multiples of 10 m (3.3 Ft.). AN ATTACHMENT

c220518 UEG0663S

3V8886 EXTENSION GP-CLAMSHELL Parts scheme

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0T-0768	[16]	BOLT
	5P-8244 C	[16]	WASHER
2.	1P-5766	[8]	FLANGE
3.	8K-4978	[2]	PLATE
4.	8K-4926	[2]	HOSE ASSEM.
			(Each Includes)
	5P-0201 H		HOSE 81 cm(31.89 in.)
5.	5P-1125	[2]	STEM ASSEM.
6.	5P-1010	[2]	SLEEVE
7.	1P-3703	[4]	SEAL
8.	3V-8888	[1]	EXTENSION ASSEM.
9.	1D-4627	[12]	BOLT
	1B-4332	[12]	NUT
	3B-4514	[12]	LOCKWASHER
	C		INDICATES CHANGE
	H		ORDER BY THE CENTIMETRE

#UEG0663S0419

3V-8887: EXTENSION GP-CLAMSHELL

EXTENSION GP-CLAMSHELL

3V8887 CLAMSHELL EXTENSION GROUP
FOR USE WITH 8K4959 CLAMSHELL ACTUATOR ARRANGEMENT LISTED ON PAGE 180B
This extension increases digging depth by 12 m (4 Ft.) and can be used with 3V8886
Extension Group, shown on Page 180G-1 if additional extension is required
AN ATTACHMENT

c215679 UEG0663S

3V8887 EXTENSION GP-CLAMSHELL Parts scheme

For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8K-4977	[2]	PLATE
2.	1P-5766	[8]	FLANGE
3.	0T-0319	[8]	BOLT
4.	4B-4279	[16]	WASHER
5.	8K-4927	[2]	HOSE ASSEM.
			(Each Includes)
	5P-0201 H		HOSE 104 cm(40.95 in.)
6.	5P-1125	[2]	STEM ASSEM.
	5P-1010	[2]	SLEEVE
7.	1P-3703	[4]	SEAL
8.	1D-4627	[24]	BOLT
	1B-4332	[24]	NUT
	3B-4514	[24]	LOCKWASHER
9.	0T-0768	[8]	BOLT
10.	3V-8888	[1]	EXTENSION ASSEM.
11.	3V-8889	[1]	ADAPTER
	H		ORDER BY THE CENTIMETRE