AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

FINAL DRIVE (2M5796 N/S)--Lower Half--Part 2 of 2 Serial No. 90J109-Up and 91J109-Up Note: Quantities shown are those required for both R.H. and L.H. sides Note: Add 3P5718 Mud & Snow Sprocket Segment Group consisting of: 9--3P5717 Segments is available D9G


POWER TRAIN
DRIVE GP-FINAL
UNDERCARRIAGE
FRAME GP-TRACK ROLLER
FRAME AND BODY
GUARD GP
UNDERCARRIAGE
ROLLER GP

TRACK-TYPE TRACTOR D9G TRACK-TYPE TRACTOR 90J
 DUAL D9G TRACTOR 90J00106-UP (MACHINE) UEG0665S D9G 90J   (1968)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE GP
2M-5796 FINAL DRIVE GP
2M-5796 FINAL DRIVE GP
FINAL DRIVE GP
2M-5796 FINAL DRIVE GP
2M-5796 FINAL DRIVE GP
FINAL DRIVE LUBRICATION SYSTEM
2M-7177 FINAL DRIVE LUBRICATION SYSTEM
2M-7177 FINAL DRIVE LUBRICATION SYSTEM
FINAL DRIVE LUBRICATION SYSTEM
2M-7177 FINAL DRIVE LUBRICATION SYSTEM
 

#UEG0665S0190
 

2M-5796: FINAL DRIVE GP

FINAL DRIVE (2M5796 N/S)--Lower Half--Part 2 of 2
Serial No. 90J109-Up and 91J109-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
Note: Add 3P5718 Mud & Snow Sprocket Segment Group consisting of: 9--3P5717 Segments is available
c204858 UEG0665S
2M5796 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2M-2961 [6] GEAR (24 TEETH)  
  2M-5588 [2] GEAR (86 TEETH)  
  2M-4550 [12] PLATE  
  9M-5895 [6] ROLLER GROUP  
  0S-0484 [40] BOLT  
  1B-4205 [40] NUT  
  2A-4465 [40] LOCK  
  2M-4454 [40] PLATE  
  3B-8927 [2] DOWEL  
  2M-2062 R [2] HUB  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  2M-1131 [2] INNER RACE AND ROLLER ASSEM.  
  2M-1148 [2] RACE (OUTER)  
  8M-3393 [16] BOLT  
  8M-3830 [16] WASHER  
  8M-2882 [8] LOCK  
  6P-2267 C [2] SHAFT  
  4F-7387 [2] SEAL  
  2M-1131 [2] INNER RACE AND ROLLER ASSEM.  
  2M-1149 [2] RACE (OUTER)  
  1A-8063 [3] BOLT  
  1D-4625 [6] BOLT  
  2M-4551 [3] DOWEL  
    (PARTS OF 2M5718 ASSEM.)
  2M-4483 [6] LOCK  
  2M-5718 [2] HUB ASSEM.  
  2P-1554 [2] GEAR (75 TEETH)  
  6H-1717 [48] BOLT  
  2A-4465 [24] LOCK  
  2M-8766 [24] PLATE  
  2A-1538 [66] BOLT  
  2S-0115 [66] WASHER  
  3P-4665 C [1] CASE (RIGHT HAND)  
  3P-4666 C [1] CASE (LEFT HAND)  
  7S-7975 [2] GUARD  
  1S-0454 [12] BOLT  
  3B-4514 [12] LOCKWASHER  
  2M-4478 [2] RETAINER  
  0L-1026 [2] PLUG  
  2M-2105 [6] HUB  
  1A-3284 C [2] PIN  
  3P-4867 C [2] RETAINER  
  0S-1585 C [28] BOLT  
  3B-4508 C [28] LOCKWASHER  
  5P-0991 R [4] SEAL GROUP  
  4M-0736 [2] SEAL  
    (PART OF 5P991 ASSEM.)
  7S-6104 [2] GEAR (27 teeth)  
  2M-1156 [2] INNER RACE AND ROLLER ASSEM.  
  2M-1157 [2] RACE (outer)  
  7S-1579 [2] NUT  
  7S-7646 [2] LOCK  
  3P-4667 C [2] SUPPORT  
  2K-2834 [2] KEY  
  2M-2150 [2] NUT  
  2M-4450 [2] LOCK  
  1B-3942 [2] CUP  
  4M-2552 [2] CONE  
  5F-2465 [2] CUP  
  7M-5334 [2] CONE  
  2B-7558 [4] CORK  
  3F-5920 [2] CUP  
  4M-1552 [2] CONE  
  0S-0509 [8] BOLT  
  0L-0364 [8] LOCK  
  2M-1126 [2] SEAL  
  2M-1129 [2] CAP  
  2M-2941 [2] NUT  
  2M-4470 [2] LOCK  
  1A-1135 [16] BOLT  
  3B-4510 [16] LOCKWASHER  
  0S-0509 [8] BOLT  
  7S-1581 [4] LOCK  
  2M-4488 [2] WASHER  
  3P-4865 C [2] SPROCKET GROUP  
  3P-4866 [1] HUB  
  5P-0233 [27] BOLT  
  2M-5656 [27] NUT  
  2P-9446 [9] SEGMENT  
    (Use With Sealed and Lubricated Track)
    (Parts of 3P4865 Group)
  3S-7460 CH [18] SEGMENT  
    (Use With Sealed and Non-Lubricated Track)
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF FINAL DRIVE
 

#UEG0665S0191
 

2M-7177: FINAL DRIVE LUBRICATION SYSTEM

FINAL DRIVE LUBRICATION SYSTEM (2M7177 N/S)--Part 1 of 2
Serial No. 90J109-Up and 91J109-Up
c118112 UEG0665S
2M7177 FINAL DRIVE LUBRICATION SYSTEM Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] COVER  
2. [4] RETAINER  
3. [2] PLUG  
4. [2] SPRING  
5. [2] SEAL  
6. [4] BOLT  
  [4] LOCKWASHER  
7. [4] SEAL  
8. [2] VALVE  
9. [2] SPRING  
10. [2] DOWEL  
11. [4] PIN  
  [2] WASHER  
12. [2] ELEMENT (Disposable)  
13. [1] HOUSING ASSEM. (R.H.)  
  [1] HOUSING ASSEM. (L.H.)  
14. [2] RING  
15. [2] ADAPTER  
16. [2] FITTING  
17. [2] NUT  
18. [2] TUBE (10.29 in. long)  
19. [1] TUBE (R.H. 13.48 in. Long)  
  [1] TUBE (L.H. 13.48 in. Long)  
20. [2] BALL  
21. [2] FITTING  
22. [1] NUT  
23. [2] TUBE (11.58 in. Long)  
24. [2] PLUG ASSEM.  
  [1] PLUG  
  [1] PIN  
25. [2] CLAMP  
26. [2] BOLT  
  [2] LOCK  
  [2] WASHER  
27. [2] FITTING  
28. [1] NUT  
 

#UEG0665S0192
 

2M-7177: FINAL DRIVE LUBRICATION SYSTEM

FINAL DRIVE LUBRICATION SYSTEM (2M7177 N/S)--Part 2 of 2
Serial No. 90J109-Up and 91J109-Up
c203457 UEG0665S
2M7177 FINAL DRIVE LUBRICATION SYSTEM Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-1001 [2] PUMP GROUP  
  7M-1869 [1] BODY ASSEM.  
2. 6H-1810 [2] DOWEL  
3. 2M-8389 [1] COVER ASSEM.  
4. 4H-7463 [2] BUSHING  
5. 2M-8390 [1] SHAFT  
  7B-5415 [2] DOWEL  
6. 0L-1351 [4] BOLT  
  7B-9514 [2] LOCK  
7. 4F-2611 [1] GEAR (Idler 10 Teeth)  
8. 1B-8705 [1] KEY  
9. 5B-9505 [1] PIN  
10. 2M-8391 [1] SHAFT  
11. 3F-4594 [1] GEAR (10 Teeth)  
12. 2M-8388 [2] GASKET  
13. 0S-1594 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
14. 8M-4448 C [4] SEAL  
15. 4M-8974 C [2] LOCK  
16. 0L-1351 C [4] BOLT  
17. 3P-5855 C [2] RESERVOIR ASSEM.  
18. 3P-5852 [1] MAGNET  
19. 3P-5853 [1] PLUG  
20. 3P-5854 C [4] NUT  
21. 0S-2415 C [4] LOCK  
22. 0S-0509 C [4] BOLT  
23. 3P-5341 C [2] TUBE  
24. 2H-1743 C [4] CLIP  
25. 7M-6467 [2] STRAINER ASSEM.  
26. 0T-0102 [2] BOLT  
  8M-3175 [2] WASHER  
27. 3P-5384 [2] SEAL  
  C   INDICATES CHANGE
 

#UEG0665S0193
 

2M-7177: FINAL DRIVE LUBRICATION SYSTEM

FINAL DRIVE LUBRICATION SYSTEM (2M7177 N/S)
Serial No. 90J106 to 90J108 inclusive and 91J106 to 91J108 inclusive
c117761 UEG0665S
2M7177 FINAL DRIVE LUBRICATION SYSTEM Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-1915 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  6H-3977 [2] SEAL  
  8M-3844 [2] COVER  
  8H-3389 [2] SPRING  
  5M-6214 [2] PLUG  
  7M-6476 [2] DOWEL  
  7M-5293 [2] VALVE  
  5B-3186 [2] SPRING  
  7M-5298 [4] RETAINER  
  2H-6338 [4] SEAL  
  4H-1641 [4] PIN  
  6B-7949 [2] WASHER  
  1S-9150 [2] ELEMENT  
    (DISPOSABLE)
  7M-6478 [2] TUBE (11.58" LONG)  
  0S-1594 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  2M-8388 [2] GASKET  
  4M-1001 [2] PUMP GROUP  
  7M-1869 [1] BODY ASSEM.  
  3F-4594 [1] GEAR (10 TEETH)  
  2M-8391 [1] SHAFT  
  5B-9505 [1] PIN  
  1B-8705 [1] KEY  
  4H-7463 [2] BUSHING  
  2M-8390 [1] SHAFT  
  7B-5415 [2] DOWEL  
    (PARTS OF COVER ASSEM. 2M8389)
  4F-2611 [1] GEAR (10 TEETH IDLER)  
  0L-1351 [4] BOLT  
  7B-9514 [2] LOCK  
  6H-1810 [2] DOWEL  
    (PART OF BODY ASSEM. 7M1869)
  2M-8389 [1] COVER  
    (Parts of 4M1001 Group)
  7M-6471 [2] TUBE (10.29" LONG)  
  6B-7640 [2] FITTING  
  8F-8998 [2] NUT  
    (Part of 6B7640 Fitting)
  7M-6475 [2] ADAPTER  
  3B-9053 [2] FITTING  
  9F-5444 [2] RING  
  8F-8998 [1] NUT  
    (Part of 3B9053 Fitting)
  7M-6474 [2] CLAMP  
  3P-5384 [2] SEAL  
  8H-0172 [2] PLUG ASSEM.  
  6H-5380 [1] PLUG  
  3H-2617 [1] PIN (Spring)  
    (Parts of 8H172 Assem.)
  4B-9784 [2] BALL  
  0S-1594 [2] BOLT  
  5H-3204 [2] LOCK  
  5M-2894 [2] WASHER  
  2M-9169 [1] TUBE (R.H. 13.48" LONG)  
  2M-9170 [1] TUBE (L.H. 13.48" LONG)  
  7M-6467 [2] STRAINER ASSEM.  
  3B-8997 [2] FITTING  
  8F-8998 [1] NUT  
    (Part of 3B8997 Fitting)
  0T-0102 [2] BOLT  
  8M-3175 [2] WASHER  
  8M-3855 [1] HOUSING ASSEM. (RIGHT HAND)  
  8M-3856 [1] HOUSING ASSEM. (LEFT HAND)  
 

#UEG0665S0194
 

4M-4001: TRACK ROLLER FRAME

TRACK ROLLER FRAME (4M4001 N/S)
Serial No. 90J106 only and 91J106 only
Note: Quantities shown are those required for both R.H. and L.H. sides
c138043 UEG0665S
4M4001 TRACK ROLLER FRAME Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-8490 [2] FITTING  
  4H-9342 [2] SHELL  
  7J-5673 C [4] SEAL  
  5H-5626 [2] GASKET  
  0S-1594 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  7S-5323 [4] SHIM (.010 in. thick)  
  7S-5324 [4] SHIM (.005 in. thick)  
  7S-5325 [2] SHIM (.003 in. thick)  
  6H-1628 [4] BOLT  
  3S-7023 [4] WASHER  
  4S-8940 [2] CAP  
    (1/2 of each in each Frame Assem. 8S5277 & 7S7900)
  9M-6746 [1] GUARD ASSEM. (R.H. Rear)  
    (Part of 8S5277 Assem.)
  9M-6745 [1] GUARD ASSEM. (L.H. Rear)  
    (Part of 7S7900 Assem.)
  7M-6469 [4] NUT  
    2 in each 9M6746 & 9M6745 Assem.)
  8S-5277 C [1] FRAME ASSEM. (R.H.)  
  7S-7900 [1] FRAME ASSEM. (L.H.)  
  8S-5811 [1] BRACE ASSEM.  
    (Part of 8S5277 Assem.)
  8S-5812 [1] BRACE ASSEM.  
    (Part of 7S7900 Assem.)
  1B-5170 [2] PLUG  
  1D-4640 [56] BOLT  
  3K-5234 [56] WASHER  
  2B-7583 [24] CORK  
  8S-5266 C [1] PLATE  
    (PART OF FRAME ASSEM. 8S5277)
  7M-4515 [2] CORK  
  2M-6926 [2] PLATE ASSEM.  
  9M-6744 [1] STRIP  
    (RIGHT HAND REAR)
  9M-6743 [1] STRIP  
    (LEFT HAND REAR)
  9M-6745 [1] GUARD ASSEM. (R.H. Outer)  
  9M-6746 [1] GUARD ASSEM. (R.H. Inner)  
    (Parts of 8S5277 Assem.)
  9M-6745 [1] GUARD ASSEM. (L.H. Inner)  
  9M-6746 [1] GUARD ASSEM. (L.H. Outer)  
    (Parts of 7S7900 Assem.)
  7M-6469 [8] NUT  
    (2 in each 9M6745 & 9M6746 Assem.)
  9M-6744 [2] STRIP  
    (R.H. Inner L.H. Outer)
  9M-6743 [2] STRIP  
    (RIGHT HAND OUTER-LEFT HAND INNER)
  1D-4626 [24] BOLT  
  3B-4514 [24] LOCKWASHER  
  7M-5346 [4] GUIDE ASSEM.  
    (2 in each 8S5277 & 7S7900 Assem.)
  4M-1619 [4] STRIP  
    (1 in each 7M5346 Assem.)
  8M-8930 [4] BRACKET  
  1D-4709 [16] BOLT  
  3B-4516 [16] LOCKWASHER  
  0T-0603 [8] BOLT  
  3B-4514 [8] LOCKWASHER  
  C   INDICATES CHANGE
 

#UEG0665S0195
 

4M-4001: TRACK ROLLER FRAME

TRACK ROLLER FRAME (4M4001 N/S)
Serial No. 90J107 and 90J108 inclusive and 91J107 and 91J108 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
c117756 UEG0665S
4M4001 TRACK ROLLER FRAME Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-8487 C [2] FITTING  
  4H-9342 [2] SHELL  
  7J-5673 [4] SEAL  
  9S-9492 [1] GUARD  
    (Part of 3P1497 Assem.)
  5H-5626 [2] GASKET  
  0S-1594 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  7S-5323 [4] SHIM (.010 in. thick)  
  7S-5324 [4] SHIM (.005 in. thick)  
  7S-5325 [2] SHIM (.003 in. thick)  
  6H-1628 [4] BOLT  
  3S-7023 [4] WASHER  
  4S-8940 [2] CAP  
    (1/2 of each in each frame Assem. 3P1497 & 3P1498)
  9M-6746 [1] GUARD ASSEM. (R.H. Rear)  
    (Part of 3P1497 Assem.)
  9M-6745 [1] GUARD ASSEM. (L.H. Rear)  
    (Part of 3P1498 Assem.)
  7M-6469 [4] NUT  
    2 in each 9M6746 & 9M6745 Assem.)
  3P-1497 C [1] FRAME ASSEM. (R.H.)  
  3P-1498 C [1] FRAME ASSEM. (L.H.)  
  9S-9491 [1] PLATE  
  7S-4783 [1] BOSS  
    (Parts of 3P1497 Assem.)
  3P-1807 [1] BRACE ASSEM.  
    (Part of 3P1497 Assem.)
  3P-1808 [1] BRACE ASSEM.  
    (Part of 3P1498 Assem.)
  1B-5174 C [2] PLUG  
  1D-4640 [56] BOLT  
  3K-5234 [56] WASHER  
  2B-7583 [24] CORK  
  7M-4515 [2] CORK  
  2M-6926 [2] PLATE ASSEM.  
  9M-6744 [1] STRIP  
    (RIGHT HAND REAR)
  9M-6743 [1] STRIP  
    (LEFT HAND REAR)
  9M-6745 [1] GUARD ASSEM. (R.H. Outer)  
  9M-6746 [1] GUARD ASSEM. (R.H. Inner)  
    (Parts of 3P1497 Assem.)
  9M-6745 [1] GUARD ASSEM. (L.H. Inner)  
  9M-6746 [1] GUARD ASSEM. (L.H. Outer)  
    (Parts of 3P1498 Assem.)
  7M-6469 [8] NUT  
    (2 in each 9M6745 & 9M6746 Assem.)
  9M-6744 [2] STRIP  
    (R.H. Inner L.H. Outer)
  9M-6743 [2] STRIP  
    (RIGHT HAND OUTER-LEFT HAND INNER)
  1D-4626 [24] BOLT  
  9H-1031 C [24] WASHER  
  7M-5346 [4] GUIDE ASSEM.  
    (2 in each 3P1497 & 3P1498 Assem.)
  4M-1619 [4] STRIP  
    (1 in each 7M5346 Assem.)
  8M-8930 [4] BRACKET  
  1D-4709 [16] BOLT  
  3B-4516 [16] LOCKWASHER  
  0T-0603 [8] BOLT  
  3B-4514 [8] LOCKWASHER  
  C   INDICATES CHANGE
 

#UEG0665S0196
 

4M-4001: TRACK ROLLER FRAME

TRACK ROLLER FRAME (4M4001 N/S)
Serial No. 90J109-Up and 91J109-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
c147511 UEG0665S
4M4001 TRACK ROLLER FRAME Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-8487 [2] FITTING  
  4H-9342 [2] SHELL  
  7J-5673 [4] SEAL  
  9S-9492 [1] GUARD  
    (Part of 3P1497 Assem.)
  5H-5626 [2] GASKET  
  0S-1594 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  7S-5323 [4] SHIM (.010 in. thick)  
  7S-5324 [4] SHIM (.005 in. thick)  
  7S-5325 [2] SHIM (.003 in. thick)  
  6H-1628 [4] BOLT  
  3S-7023 [4] WASHER  
  4S-8940 [2] CAP  
    (1/2 of each in each frame Assem. 3P1497 & 3P1498)
  9M-6746 [1] GUARD ASSEM. (R.H. Rear)  
    (Part of 3P1497 Assem.)
  9M-6745 [1] GUARD ASSEM. (L.H. Rear)  
    (Part of 3P1498 Assem.)
  7M-6469 [4] NUT  
    2 in each 9M6746 & 9M6745 Assem.)
  3P-1497 [1] FRAME ASSEM. (R.H.)  
  3P-1498 [1] FRAME ASSEM. (L.H.)  
  9S-9491 [1] PLATE  
  7S-4783 [1] BOSS  
    (Parts of 3P1497 Assem.)
  3P-1807 [1] BRACE ASSEM.  
    (Part of 3P1497 Assem.)
  3P-1808 [1] BRACE ASSEM.  
    (Part of 3P1498 Assem.)
  1B-5174 [2] PLUG  
  1D-4640 [56] BOLT  
  3K-5234 [56] WASHER  
  2B-7583 [24] CORK  
  7M-4515 [2] CORK  
  5H-5625 C [2] PLATE  
  9M-6744 [1] STRIP  
    (RIGHT HAND REAR)
  9M-6743 [1] STRIP  
    (LEFT HAND REAR)
  9M-6745 [1] GUARD ASSEM. (R.H. Outer)  
  9M-6746 [1] GUARD ASSEM. (R.H. Inner)  
    (Parts of 3P1497 Assem.)
  9M-6745 [1] GUARD ASSEM. (L.H. Inner)  
  9M-6746 [1] GUARD ASSEM. (L.H. Outer)  
    (Parts of 3P1498 Assem.)
  7M-6469 [8] NUT  
    (2 in each 9M6745 & 9M6746 Assem.)
  9M-6744 [2] STRIP  
    (R.H. Inner L.H. Outer)
  9M-6743 [2] STRIP  
    (RIGHT HAND OUTER-LEFT HAND INNER)
  1D-4626 [24] BOLT  
  9H-1031 [24] WASHER  
  7M-5346 [4] GUIDE ASSEM.  
    (2 in each 3P1497 & 3P1498 Assem.)
  4M-1619 [4] STRIP  
    (1 in each 7M5346 Assem.)
  8M-8930 [4] BRACKET  
  1D-4709 [16] BOLT  
  3B-4516 [16] LOCKWASHER  
  0T-0603 [8] BOLT  
  3B-4514 [8] LOCKWASHER  
  C   INDICATES CHANGE
 

#UEG0665S0197
 

4M-3972: TRACK ROLLER FRAME GUARDS

TRACK ROLLER FRAME GUARDS (4M3972 N/S)
Note: Quantities shown are those required for both R.H. and L.H. sides
c102172 UEG0665S
4M3972 TRACK ROLLER FRAME GUARDS Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-8185 [1] GUARD ASSEM. (RIGHT HAND)  
  3S-8186 [1] GUARD ASSEM. (LEFT HAND)  
  0S-1626 [18] BOLT  
  4M-2494 [4] NUT  
    (2 OF EACH IN EACH GUARD ASSEM. 5S3185 AND 5S3186)
  3B-4512 [18] LOCKWASHER  
  4B-4283 [18] WASHER  
  2S-6339 [1] GUARD GROUP (RIGHT HAND)  
  2S-6340 [1] GUARD GROUP (LEFT HAND)  
  1A-8063 [2] BOLT  
  3B-4512 [2] LOCKWASHER  
  4B-4283 [2] WASHER  
  5S-3185 [1] GUARD ASSEM. (RIGHT HAND)  
  5S-3186 [1] GUARD ASSEM. (LEFT HAND)  
  4M-3981 [2] BOLT  
  4B-4280 [2] WASHER  
  3H-6660 [2] PIN (SPRING)  
  1K-6856 [2] NUT  
  1F-0748 [2] NUT (WELD)  
  1S-5242 [2] PLATE (WARNING)  
  7B-3028 [8] SCREW  
    (1/2 OF EACH IN EACH GUARD GROUP 2S6339 AND 2S6340)
  5S-3191 [2] GUARD ASSEM.  
  0S-1592 [12] BOLT  
  3B-4510 [12] LOCKWASHER  
  4B-4281 [12] WASHER  
  0S-1592 [16] BOLT  
  3B-4510 [16] LOCKWASHER  
  4B-4281 [16] WASHER  
 

#UEG0665S0198
 

7M-5288: TRACK CARRIER ROLLER GROUP

7M5288 TRACK CARRIER ROLLER GROUP--4 Required
c117785 UEG0665S
7M5288 TRACK CARRIER ROLLER GROUP Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1M-1304 [1] SUPPORT ASSEM.  
  1M-8746 R [1] SEAL GROUP  
  8H-2265 [2] RING  
    (PART OF 1M8746 GROUP)
  6H-3977 [1] SEAL  
  9H-7078 [4] DOWEL  
    (PART OF SUPPORT ASSEM. 4M4826)
  8F-0737 [1] RING  
  4M-4826 [1] SUPPORT ASSEM.  
  2H-3935 [1] SEAL  
  2H-1190 [2] DOWEL  
    (PART OF SUPPORT ASSEM. 1M1304)
  4M-4828 [1] SHAFT  
  7H-2620 [2] CUP  
  7H-2621 [2] CONE  
  8H-3364 [1] RING  
  9H-7536 [1] NUT  
  2P-0347 C [1] PLUG  
  1S-8947 C [1] SEAL  
  5M-1669 [1] COVER  
  2H-3928 [1] SEAL  
  0S-1594 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  9S-8322 [1] ROLLER ASSEM.  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0665S0199
 

7S-7672: TRACK ROLLER GROUP

7S7672 TRACK ROLLER GROUP--Single Flange--6 Required
7S7673 TRACK ROLLER GROUP--Double Flange--8 Required
Note: 4S8048 Track Roller Seal Kit is available
c117784 UEG0665S
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-0583 [1] ROLLER ASSEM.(WITH SHAFT)  
    (DOUBLE FLANGE)
  4M-8262 [1] ROLLER ASSEM.  
    (PART OF ASSEM. 4M583)
  4S-8072 [2] RING  
  1T-0068 [1] PIN  
  8S-0009 [2] COLLAR  
  4M-0582 [1] ROLLER ASSEM.(WITH SHAFT)  
    (SINGLE FLANGE)
  8H-5637 [1] ROLLER ASSEM.  
    (PART OF ASSEM. 4M582)
  8H-5634 [2] BUSHING ASSEM. (STD.)  
    (PART OF ASSEM.4M582 & 4M583)
    - OR -
  1M-0148 [2] BUSHING ASSEM.(.040"0''SIZE)  
    (USED WITH REBORED ROLLER ASSEM.)
  1M-0142 [2] BUSHING  
    (1 IN EACH ASSEM. 8H5634 & 1M148)
  9B-2289 [4] PIN  
    (2 IN EACH ASSEM. 8H5634 & 1M148)
  4M-0578 [1] SHAFT  
    (PART OF ASSEM.4M582 & 4M583)
  2P-0347 C [2] PLUG  
  1S-8947 C [2] SEAL  
    (1 EACH IN 4M582 AND 4M583)
  2H-3931 [2] SEAL  
  6H-1309 [4] SEAL (RUBBER)  
    (2 IN EACH SEAL GRP.1M8748)
  1M-8748 R [2] SEAL GROUP  
  2H-3935 [2] SEAL  
  0S-1587 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
    (PARTS OF ASSEM.4M582 & 4M583)
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}
Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}
Installation Of 8P7639 Planet Gears{4050}
Installation Of 8P7639 Planet Gears{4050}
Installation Of 3T9446 Final Drive Lubrication Reservoir{4050}
Installation Of 3T9446 Final Drive Lubrication Reservoir{4050}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Caterpillar Track Type Tractor (D9 - D11) Technician Checklist<BR>Final Drive, Steering Clutch, and Brake Removal and Installation{0372, 0374, 4050, 4050, 4101, 4101, 4251, 4251}
Caterpillar Track Type Tractor (D9 - D11) Technician Checklist
Final Drive, Steering Clutch, and Brake Removal and Installation{0372, 0374, 4050, 4050, 4101, 4101, 4251, 4251}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Improved Final Drive Lubrication Reservoir Assembly{4050,4070}
1982/06/14
New Bearing Used For Planet Gear In Final Drive Group-Revision Of Article With The Same Title In The Service Magazine July 12, 1976, Page 11{4050}
1977/08/08
Magnetic Plug Gives A Visual Indication Of Possible Final Drive Damage{4059}
1978/09/25
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog D9G :

FINAL DRIVE GP
2M-5796 FINAL DRIVE GP
2M-5796 FINAL DRIVE GP
FINAL DRIVE GP
2M-5796 FINAL DRIVE GP
4M-3835 FRONT IDLER
FRONT IDLER
4M-3835 FRONT IDLER
4M-3835 FRONT IDLER
FRONT IDLER
4M-3835 FRONT IDLER
4M-1700 BRAKES
FINAL DRIVE LUBRICATION SYSTEM
2M-7177 FINAL DRIVE LUBRICATION SYSTEM
2M-7177 FINAL DRIVE LUBRICATION SYSTEM
FINAL DRIVE LUBRICATION SYSTEM
2M-7177 FINAL DRIVE LUBRICATION SYSTEM
TRACK ROLLER FRAME
4M-4001 TRACK ROLLER FRAME
TRACK ROLLER FRAME
4M-4001 TRACK ROLLER FRAME
TRACK ROLLER FRAME
4M-4001 TRACK ROLLER FRAME
TRACK ROLLER FRAME GUARDS
4M-3972 TRACK ROLLER FRAME GUARDS
TRACK CARRIER ROLLER GROUP
7M-5288 TRACK CARRIER ROLLER GROUP

Truck sale:

Caterpillar D9G
 
Caterpillar D9G
- Crawler dozers
HOLT CAT
Caterpillar D9G, Crawler dozers, Construction
 
Caterpillar D9G, Crawler dozers, Construction
- Crawler dozers
WILLIAM ADAMS PTY. LTD.
 
26.828 
Caterpillar D9G, Bulldozer, Bau-Und Bergbauausrüstung


1971 CAT D9G
USD $14,900 
1971 CAT D9G

Binkley Equipment
Rochester, Minnesota
1970 CAT D9G
Call 
1970 CAT D9G

Auto Express
RICH CREEK, Virginia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.