AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3204 ENGINE 03Y00001-UP (MACHINE) LUBRICATION SYSTEM Caterpillar SIS



TRACK LOADER 943 TRACK LOADER 03Y
 3204 ENGINE 03Y00001-UP (MACHINE) UEG0678S 943 03Y   (1981)

Parts group 943:

  For full view, you need register
LUBRICATION SYSTEM
BREATHER GP
BREATHER
4N-0173 BREATHER
BREATHER (4N173 N/S)
Part of 4N303 and 4N169 Engine Arrangements listed on Page 8
FUMES DISPOSAL
4N-0177 FUMES DISPOSAL
FUMES DISPOSAL (4N177 N/S)
Part of 4N303 and 4N169 Engine Arrangements listed on Page 8
FILLER GP-ENGINE OIL
FILLER GP-OIL
4N-0661 FILLER GP-OIL
OIL FILLER (4N661 N/S)
Part of 4N303 Engine Arrangement listed on Page 8
FILTER GP-ENGINE OIL
FILTER AS-OIL
9L-9200 FILTER AS-OIL
9L9200 OIL FILTER ASSEMBLY
Part of 4N303 and 4N169 Engine Arrangements listed on Page 8
FUMES DISPOSAL GP
FUMES DISPOSAL
4N-0177 FUMES DISPOSAL
FUMES DISPOSAL (4N177 N/S)
Part of 4N303 and 4N169 Engine Arrangements listed on Page 8
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-0305 GAUGE GP-OIL LEVEL (DIPSTICK)
OIL LEVEL GAUGE (4N305 N/S)
Part of 4N303 Engine Arrangement listed on Page 8
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-0185 GAUGE GP-OIL LEVEL (DIPSTICK)
OIL LEVEL GAUGE (4N185 N/S)
Part of 4N169 Engine Arrangement listed on Page 8
PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
4N-0193 PUMP GP-ENGINE OIL
OIL PUMP (4N193 N/S)
Part of 4N303 and 4N169 Engine Arrangements listed on Page 8

Information:

(For parts list, see above)

Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Service Magazine
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Fumes Disposal Group Improved{1317}
1985/09/02
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Improved Vandalism Guards{7315}
1981/06/22
Modification To Guard Assembly{7315}
1981/09/28
New Vandalism Guard Prevents Damage When The Platform Is Tilted{7315}
1983/04/25
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Special Instruction
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Specifications
Oil Filter
943 & 953 TRACK-TYPE LOADERS
Charge Pressure Relief &amp; Cooler Bypass Valves<BR> (9J1839 Relief Valve, 3G4070 Bypass Valve
943 & 953 TRACK-TYPE LOADERS
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Oil Filter Bypass Valve
3204 VEHICULAR ENGINE FOR 943 & 953 TRACK-TYPE LOADERS
Engine Oil Cooler (Earlier 943)
3204 VEHICULAR ENGINE FOR 943 & 953 TRACK-TYPE LOADERS
Engine Oil Cooler (953 &amp; Later 943)
3204 VEHICULAR ENGINE FOR 943 & 953 TRACK-TYPE LOADERS
Oil Cooler Bypass Valve
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Improved Sealing Of Engine Oil Coolers{1378}
1977/02/14
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Service Magazine
Fumes Disposal Group Improved{1317}
1985/09/02
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Service Magazine
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Disassembly and Assembly
Oil Filter Bypass Valve
3204 VEHICULAR ENGINE FOR 943 & 953 TRACK-TYPE LOADERS
Service Magazine
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
Improved Vandalism Guards{7315}
1981/06/22
Modification To Guard Assembly{7315}
1981/09/28
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
New Engine Oil Pump And Front Housing Groups{1304,1315,1151}
1983/01/24
New Vandalism Guard Prevents Damage When The Platform Is Tilted{7315}
1983/04/25
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fumes Disposal Group Improved{1317}
1985/09/02
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Specifications
Oil Pump
943 & 953 TRACK-TYPE LOADERS
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Disassembly and Assembly
Oil Pump And Relief Valve
3204 VEHICULAR ENGINE FOR 943 & 953 TRACK-TYPE LOADERS
Service Magazine
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
New Engine Oil Pump And Front Housing Groups{1304,1315,1151}
1983/01/24
New Oil Pump Relief Valve Guide{1304}
1986/10/20
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Check Engine Water Pump Impeller Face Clearance If The Engine Experiences Symptoms Of Overheating {1361}
1993/01/25
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Truck sale:

Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 943, Construction
17,730 
Caterpillar 943, Construction
- track loaders
ZEPPELIN BAUMASCHINEN
Germany
 
17.823 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders

 
18,302 
Caterpillar 943, Construction
- track loaders

Caterpillar TH943D, Construction
1,991 
Caterpillar TH943D, Construction
- forks
FINNING CANADA – USED ATTACHMENTS
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.