AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

941B TRAXCAVATOR 80H03884-05702 (MACHINE) UNDERCARRIAGE Caterpillar SIS



TRACK LOADER 941B TRACK LOADER 80H
 941B TRAXCAVATOR 80H03884-05702 (MACHINE) UEG0680S 941B 80H   (1971)

Parts group 941B:

  For full view, you need register
UNDERCARRIAGE
IDLER GP
FRONT IDLER
9K-6021 FRONT IDLER
FRONT IDLER (9K6021 N/S)--Part 1 of 2
FRONT IDLER
9K-6021 FRONT IDLER
FRONT IDLER (9K6021 N/S)--Part 2 of 2
ROLLER GP
ROLLER GP-TRACK SINGLE FLANGE
7K-8095 ROLLER GP-TRACK SINGLE FLANGE
7K8095 TRACK ROLLER GROUP--Single Flange--4 Required
ROLLER GP-TRACK DOUBLE FLANGE
7K-8096 ROLLER GP-TRACK DOUBLE FLANGE
7K8096 TRACK ROLLER GROUP--Double Flange--6 Required
ROLLER GP-TRACK CARRIER
6K-9879 ROLLER GP-TRACK CARRIER
6K9879 TRACK CARRIER ROLLER GROUP--2 Required
TRACK ROLLER DIRT GUARD GROUP
7K-3439 TRACK ROLLER DIRT GUARD GROUP
7K3439 TRACK ROLLER DIRT GUARD GROUP
AN ATTACHMENT
TRACK GP
RUBBER SHOE PLATE SERVICE GROUP
1V-8134 RUBBER SHOE PLATE SERVICE GROUP
1V8134 RUBBER SHOE PLATE SERVICE GROUP
FIELD INSTALLATION
Only separate parts serviced
TRACK GROUP
7K-2065 TRACK GROUP
7K2065 TRACK GROUP--13" Triple Grouser Shoe--2 Required
Serial No. 80H3884 to 80H5055 inclusive. Note: 7K8456 Track Pin and
Bushing Group, consisting of a complete set of Pins and Bushings
for one track, is available
TRACK GROUP
7K-2066 TRACK GROUP
7K2066 TRACK GROUP--14" Triple Grouser Shoe--2 Required
Serial No. 80H3884 to 80H5055 inclusive. Note: 7K8456 Track Pin and
Bushing Group, consisting of a complete set of Pins and Bushings for
one track, is available. AN ATTACHMENT
TRACK GROUP
2V-2293 TRACK GROUP
2V2293 TRACK GROUP--13" Double Grouser Shoe--2 Required
Serial No. 80H5056-Up
TRACK GROUP
2V-2294 TRACK GROUP
2V2294 TRACK GROUP--14" Double Grouser Shoe--2 Required
Serial No. 80H5056-Up. AN ATTACHMENT
TRACK GROUP
1V-7216 TRACK GROUP
1V7216 TRACK GROUP--14" Double Grouser Shoe--Sealed, Non-Lubricated--2 Required--Replaced by 9G6401 shown on Page 90D
Note: 1V8623 Pin & Bushing Group, consisting of a complete set of Pins & Bushing for one track, is available
AN ATTACHMENT
TRACK GROUP
1V-4611 TRACK GROUP
1V4611 TRACK GROUP--14" Double Grouser Shoe--Sealed and Lubricated--Replaced by 9G6402 shown on Page 90E
AN ATTACHMENT
TRACK GP
9G-6401 TRACK GP
9G6401 TRACK GROUP--14" Double Grouser Shoe--Sealed, Non-Lubricated-2 Required
AN ATTACHMENT
TRACK GP
9G-6402 TRACK GP
9G6402 TRACK GROUP--14" Double Grouser Shoe--Sealed & Lubricated
AN ATTACHMENT
TRACK GROUP
9G-6398 TRACK GROUP
9G6398 TRACK GROUP--14" Triple Grouser Shoe--Sealed & Lubricated--2 Required
AN ATTACHMENT
FRAME GP-TRACK ROLLER
TRACK ROLLER FRAME
9K-6013 TRACK ROLLER FRAME
TRACK ROLLER FRAME (9K6013 N/S)

Information:

(For parts list, see above)

Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Special Instruction
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Front Idler And Recoil Spring
941 TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Undercarriage Reconditioning Bulletin
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Service Magazine
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Specifications
Track Carrier Roller
941 TRACK-TYPE LOADER POWER TRAIN
Track Rollers
941 TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Service Magazine
Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Special Instruction
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Specifications
Front Idler And Recoil Spring
941 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Special Instruction
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Technical Information Bulletin
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Specifications
Track
941 TRACK-TYPE LOADER POWER TRAIN
Alignment Of Track Roller Frame
941 TRACK-TYPE LOADER POWER TRAIN
Track Roller Frame
941 TRACK-TYPE LOADER POWER TRAIN
Track Carrier Roller
941 TRACK-TYPE LOADER POWER TRAIN
Track Rollers
941 TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Service Magazine
Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06
Fabricated Clamp And Bar Assembly Makes Installation Of Tracks On Smaller Size Tractors And Loaders Easier{0620,4170}
1979/02/05
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Service Magazine
Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Tool Operating Manual
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Service Magazine
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Specifications
Alignment Of Track Roller Frame
941 TRACK-TYPE LOADER POWER TRAIN
Track Roller Frame
941 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Reuse And Salvage Guidelines
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Special Instruction
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

Caterpillar 941B, Construction
12,500 USD 
Caterpillar 941B, Construction
- track loaders
FOLEY, INC.
CAT 941B
 
CAT 941B

Southeastern Auction Company, Inc
2711 - CAT 941B
 
2711 - CAT 941B

avspare
1973 CAT 941B
USD $18,900 
1973 CAT 941B

Gulf Coast Equipment
CAT 941B
Call 
CAT 941B

Kiesel Worldwide Machinery Gmbh
Baienfurt / Ravensburg, Germany
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.