AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7K4878 LIFT CYLINDER LINES GROUP--Part 2 of 2--Type 1 941 TRACK LOADER


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER
OPERATOR STATION
CONTROL GP-HYDRAULIC

TRACK LOADER 941 TRACK LOADER 80H
 941B TRAXCAVATOR 80H03884-05702 (MACHINE) UEG0680S 941 80H   (1971)

HYDRAULIC SYSTEM

CYLINDER GP
TILT CYLINDER GROUP
7J-9750 TILT CYLINDER GROUP
LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
CYLINDER MOUNTING GROUP
6K-4140 CYLINDER MOUNTING GROUP
 

#UEG0680S0200
 

7K-4878: LINES GP-CYLINDER

7K4878 LIFT CYLINDER LINES GROUP--Part 2 of 2--Type 1
c138731 UEG0680S
7K4878 LINES GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0190 [6] FLANGE  
2. 4J-5267 C [6] SEAL  
3. 8K-7487 C [1] HOSE ASSEM.  
  9S-0247 H HOSE 35.00"  
  3S-8363 [1] STEM ASSEM. (90 degrees)  
4. 7S-9371 [1] STEM ASSEM. (90 degrees)  
5. 3S-7166 [2] SLEEVE  
6. 7K-0647 [1] HOSE ASSEM.  
  9S-0671 H HOSE 29.40"  
7. 3S-8606 [2] SLEEVE  
8. 8S-6457 [2] STEM ASSEM.  
9. 0S-1594 [6] BOLT  
10. 3B-4506 C [20] LOCKWASHER  
11. 7K-4862 [1] TUBE ASSEM. (L.H.)  
  5K-9473 [1] CLIP  
12. 1A-2029 [8] BOLT  
13. 8K-7485 C [1] HOSE ASSEM.  
  9S-0247 H HOSE 47.80"  
14. 3S-7166 [2] SLEEVE  
15. 3S-8363 [2] STEM ASSEM. (90 degrees)  
16. 0S-1588 C [8] BOLT  
17. 4J-8996 [4] SEAL  
18. 0S-1571 [4] BOLT  
19. 6K-7446 [2] SPACER  
20. 0S-0509 [2] BOLT  
21. 7K-4861 [1] TUBE ASSEM. (R.H.)  
22. 5K-9473 [1] CLIP  
23. 7K-0646 [1] HOSE ASSEM.  
  9S-0671 H HOSE 46.40"  
  8S-6457 [1] STEM ASSEM. (90 degrees)  
24. 8S-6459 [1] STEM ASSEM. (Straight)  
25. 3S-8606 [2] SLEEVE  
26. 1D-4717 [2] NUT  
27. 6K-7467 [1] CLAMP  
28. 4B-3388 C [4] BOLT  
  3B-4505 [4] LOCKWASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#UEG0680S0201
 

7K-4878: LINES GP-CYLINDER

7K4878 LIFT CYLINDER LINES GROUP--Part 1 of 2--Type 2
c207620 UEG0680S
7K4878 LINES GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-7401 [2] "U" BOLT  
2. 1D-4716 [4] NUT  
3. 3B-4505 [12] LOCKWASHER  
4. 4B-4277 C [12] WASHER  
5. 7K-0364 [1] BRACKET (L.H. Side)  
6. 0S-1594 [8] BOLT  
7. 3B-4506 C [20] LOCKWASHER  
8. 1A-4784 C [12] WASHER  
9. 6K-7445 [1] TUBE ASSEM. (7.11 dm(27.98 in.)  
10. 1B-7182 [4] BOLT  
11. 4B-4278 C [4] WASHER  
12. 1P-4576 C [2] FLANGE  
13. 4J-5267 [4] SEAL  
14. 0S-1588 [4] BOLT  
15. 6K-7363 [1] BRACKET ASSEM.  
16. 9F-2978 [2] NUT (Weld)  
17. 6K-7397 [1] BRACKET ASSEM.  
18. 9F-2978 [2] NUT (Weld)  
19. 1P-4575 C [8] FLANGE  
20. 4J-8996 [3] SEAL  
21. 4B-3388 [8] BOLT  
22. 1A-9579 [4] BOLT  
23. 6K-7402 [1] BRACKET (R.H. Side)  
24. 6K-7393 [1] TUBE ASSEM.  
25. 6K-7409 [1] TUBE ASSEM. 5.81 cm(22.88 in.)  
26. 1A-1460 [2] BOLT  
27. 3B-4508 [4] LOCKWASHER  
28. 6K-7411 [1] TUBE ASSEM. 6.83 cm(26.90 in.)  
29. 2B-0947 [2] BOLT  
30. 0S-1571 [4] BOLT  
31. 6K-7396 [1] HOSE ASSEM.  
  5P-0180 CH HOSE 72.64 cm(28.60 in.)  
32. 3S-7166 [2] SLEEVE  
33. 3S-7165 [2] STEM ASSEM.  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0680S0202
 

7K-4878: LINES GP-CYLINDER

7K4878 LIFT CYLINDER LINES GROUP--Part 2 of 2--Type 2
c207621 UEG0680S
7K4878 LINES GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4576 C [8] FLANGE  
2. 4J-5267 [6] SEAL  
3. 8K-7487 [1] HOSE ASSEM.  
  5P-0180 CH HOSE 88.90 cm(35 in.)  
  3S-8363 [1] STEM ASSEM. (90 degrees)  
4. 7S-9371 [1] STEM ASSEM. (90 degrees)  
5. 3S-7166 [2] SLEEVE  
6. 7K-0647 [1] HOSE ASSEM.  
  5P-0179 CH HOSE 74.68 cm(29.40 in.)  
7. 3S-8606 [2] SLEEVE  
8. 8S-6457 [2] STEM ASSEM.  
9. 0S-1594 [6] BOLT  
10. 3B-4506 C [18] LOCKWASHER  
11. 7K-4862 [1] TUBE ASSEM. (L.H.)  
  5K-9473 [1] CLIP  
12. 1A-2029 [8] BOLT  
13. 8K-7485 [1] HOSE ASSEM.  
  5P-0180 CH HOSE 121.41 cm(47.80 in.)  
14. 3S-7166 [2] SLEEVE  
15. 3S-8363 [2] STEM ASSEM. (90 degrees)  
16. 0S-1588 [12] BOLT  
17. 4J-8996 [4] SEAL  
18. 0S-1571 C [6] BOLT  
19. 6K-7446 [2] SPACER  
20. 0S-0509 [2] BOLT  
21. 7K-4861 [1] TUBE ASSEM. (R.H.)  
22. 5K-9473 [1] CLIP  
23. 7K-0646 [1] HOSE ASSEM.  
  5P-0179 CH HOSE 117.86 cm(46.40 in.)  
  8S-6457 [1] STEM ASSEM. (90 degrees)  
24. 8S-6459 [1] STEM ASSEM. (straight)  
25. 3S-8606 [2] SLEEVE  
26. 1D-4717 C [4] NUT  
27. 6K-7467 [1] CLAMP  
28. 4B-3388 [8] BOLT  
  4B-4277 C [8] WASHER  
29. 4B-4278 C [16] WASHER  
30. 1V-1118 C [4] CLAMP  
31. 6K-0806 C [2] TIE  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0680S0203
 

6K-4145: LINES GP-TILT CYLINDER

6K4145 TILT CYLINDER LINES GROUP--Part 1 of 2
AS VIEWED FROM R.H. SIDE OF MACHINE
c207618 UEG0680S
6K4145 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4539 [16] BOLT  
2. 1D-4716 [32] NUT  
3. 4B-4277 C [72] WASHER  
4. 6K-4033 [1] TUBE ASSEM. (R.H.-Outer)  
  6K-4034 [1] TUBE ASSEM. (L.H.-Outer)  
5. 0S-1588 [16] BOLT  
6. 3B-4506 [32] LOCKWASHER  
7. 1A-9579 [16] BOLT  
8. 6K-4057 [1] TUBE ASSEM. (R.H.-Inner)  
  6K-4058 [1] TUBE ASSEM. (L.H.-Inner)  
    (To Cylinder Rod End)
  4J-5267 [4] SEAL  
9. 5K-8497 [2] BRACKET (R.H.)  
  5K-8498 [2] BRACKET (L.H.)  
10. 0S-1594 [8] BOLT  
11. 4B-4278 [16] WASHER  
12. 7K-0648 [4] HOSE ASSEM.  
  5P-0179 CH HOSE 82 cm(32.28 in.)  
13. CJ GUARD 7.40 dm(29.13in.)  
14. 3S-8606 [2] SLEEVE  
15. 8S-6457 [2] STEM ASSEM.  
16. 1D-4538 C [16] BOLT  
17. 6K-3922 [4] SPACER  
18. 1P-4575 C [24] FLANGE  
19. 4J-8996 [20] SEAL  
20. 0T-0320 [8] BOLT  
  9M-5048 [8] NUT  
  4B-4279 [8] WASHER  
21. 6K-4031 [1] TUBE ASSEM. (R.H.-Inner)  
  6K-4032 [1] TUBE ASSEM. (L.H.-Inner)  
22. 3B-1915 [8] BOLT  
  4J-8265 [8] NUT  
23. 6K-3923 [4] SPACER  
24. 6K-3920 [2] SPACER  
25. 0L-1351 [8] BOLT  
26. 6K-3924 [4] BRACKET  
27. 6K-3921 [2] SPACER  
28. 6K-4055 [1] TUBE ASSEM. (R.H.-Outer)  
  6K-4056 [1] TUBE ASSEM. (L.H.-Outer)  
    (To Cylinder Head End)
  H   ORDER BY THE CENTIMETRE
  J   ORDER BY THE DECIMETRE
  C   INDICATES CHANGE
 

#UEG0680S0204
 

6K-4145: LINES GP-TILT CYLINDER

6K4145 TILT CYLINDER LINES GROUP--Part 2 of 2
AS VIEWED FROM R.H. SIDE OF MACHINE
c207619 UEG0680S
6K4145 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0947 [2] BOLT  
2. 3B-4508 [4] LOCKWASHER  
3. 4B-4280 [1] WASHER  
4. 4J-0519 [1] SEAL  
5. 6K-7518 [1] TUBE ASSEM.  
    (Ref. No. 17 to Hydraulic Tank)
6. 1B-2790 [8] BOLT  
7. 1F-4111 [4] BOLT 8.89 cm(3.50 in.) long  
  2B-2694 [4] BOLT 5.08 cm(2 in.) long  
  1D-4716 [8] NUT  
8. 3B-4505 [24] LOCKWASHER  
9. 1P-4575 [12] FLANGE  
10. 4J-8996 [6] SEAL  
11. 7K-1855 [4] HOSE ASSEM.  
  5P-0179 CH HOSE 62.48cm(24.60 in.)  
12. 3S-8606 [2] SLEEVE  
13. CJ GUARD 5.33 dm(21 in.)  
14. 8S-6458 [1] STEM ASSEM. (60)  
15. 9S-0681 [1] STEM ASSEM. (Straight)  
16. 7K-1349 [1] TUBE ASSEM. (Right Hand)  
    (Ref. No. 24 to Ref. No. 26)
17. 8K-7621 [1] TUBE ASSEM.  
    (Ref. No. 5 to Ref. No. 14)
18. 0S-1594 [4] BOLT  
19. 3B-4506 [12] LOCKWASHER  
  4B-4278 [12] WASHER  
20. 0L-1351 [8] BOLT  
21. 9K-1542 [1] BRACKET  
22. 6K-7401 [1] "U" BOLT  
  1D-4716 [4] NUT  
  3B-4505 [4] LOCKWASHER  
  4B-4277 [4] WASHER  
23. 6K-7608 [2] BRACKET  
24. 6K-7637 [1] TUBE ASSEM.  
    (Ref. No. 16 to Hydraulic Tank)
25. 1A-1460 [2] BOLT  
26. 7K-0649 [1] HOSE ASSEM.  
  5P-0179 CH HOSE 56 cm(22.05 in.)  
27. 3S-8606 [2] SLEEVE  
28. 8S-6457 [2] STEM ASSEM.  
29. 7K-1350 [1] TUBE ASSEM. (Left Hand)  
    (Ref. No. 26 to Ref. No. 30)
30. 6K-7607 [1] BLOCK  
31. 9K-1543 [1] BRACKET  
32. 4B-3388 [8] BOLT  
33. 1A-9579 [8] BOLT  
34. 4J-5267 [8] SEAL  
  H   ORDER BY THE CENTIMETRE
  J   ORDER BY THE DECIMETRE
  C   INDICATES CHANGE
 

#UEG0680S0205
 

5K-9646: HYDRAULIC HAND CONTROL GROUP

5K9646 HYDRAULIC HAND CONTROL GROUP
Serial No. 80H3884 to 80H5568 inclusive
c129524 UEG0680S
5K9646 HYDRAULIC HAND CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1170 [2] HANDLE  
2. 7K-7161 [1] LEVER (Lift)  
3. 1L-3046 [12] WASHER  
4. 7K-3831 [1] SPACER  
5. 6K-3973 [1] SHAFT  
  4H-3119 [1] PIN  
6. 6K-0647 [4] BEARING  
7. 6K-3975 [1] BRACKET  
8. 6H-1717 [3] BOLT  
9. 3B-4508 [3] LOCKWASHER  
10. 1A-9252 [1] ROD END  
11. 7H-7647 [1] ROD  
12. 3K-0881 [1] ROD  
13. 5B-9079 [2] NUT  
14. 2K-0400 [1] YOKE END  
15. 1J-4384 [4] PIN  
16. 3B-4615 [4] COTTER PIN  
17. 7K-7162 [1] LEVER (Tilt)  
18. 7B-3028 [4] SCREW  
19. 4M-4625 [4] PLATE (Instruction)  
 

#UEG0680S0206
 

6K-0252: HAND CONTROL GROUP

6K252 HAND CONTROL GROUP--Rear--Replaced by 1V6390 shown on Page 110A
Part of 6K5465 and 6K389 Hydraulic and 8K6752, 6K5468 and 6K5470 Conversion
Arrangements listed on Pages 113 and 114. AN ATTACHMENT
c130218 UEG0680S
6K0252 HAND CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [1] BOLT  
2. 1D-4717 [1] NUT  
3. 4H-1394 [2] WASHER  
4. 6D-5974 [4] BEARING  
5. 5K-9987 [1] LEVER  
6. 1B-8706 [1] KEY  
7. 0L-1170 [1] HANDLE  
8. 1M-6421 [1] STUD  
9. 3B-4506 [5] LOCKWASHER  
10. 3A-2138 [1] SHEET ASSEM.  
11. 9F-2978 [12] NUT (Weld)  
    (Part of 3A2138 Assem.)
12. 1B-4205 [2] NUT  
13. 3B-4508 [2] LOCKWASHER  
14. 5K-9886 [1] LEVER ASSEM.  
15. 6K-4442 [2] BALLJOINT ASSEM.  
  1B-4430 [2] NUT  
16. 4J-1722 [1] ROD  
17. 2J-7148 [1] LEVER  
  2S-6160 [1] WASHER  
18. 0S-0175 [2] PIN  
  3B-4617 [2] COTTER PIN  
19. 6K-4566 [1] COVER  
20. 8F-1786 [1] ROD  
21. 0S-1594 [5] BOLT  
 

#UEG0680S0207
 

2V-4379: HYDRAULIC HAND CONTROL GROUP

2V4379 HYDRAULIC HAND CONTROL GROUP
Serial No. 80H5569-Up
c154565 UEG0680S
2V4379 HYDRAULIC HAND CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1170 [2] HANDLE  
2. 2V-4382 [1] LEVER (Lift)  
3. 1L-3046 [12] WASHER  
4. 7K-3831 [1] SPACER  
5. 6K-3973 [1] SHAFT  
  4H-3119 [1] PIN  
6. 6D-5974 [4] BEARING  
7. 6K-3975 [1] BRACKET  
8. 6H-1717 [3] BOLT  
9. 3B-4508 [3] LOCKWASHER  
10. 1A-9252 [1] ROD END  
11. 7H-7647 [1] ROD  
12. 3K-0881 [1] ROD  
13. 5B-9079 [2] NUT  
14. 2K-0400 [1] YOKE END  
15. 1B-0676 [4] PIN  
16. 3B-4615 [4] COTTER PIN  
17. 2V-4381 [1] LEVER (Tilt)  
18. 7B-3028 [4] SCREW  
19. 4M-4625 [1] PLATE (Instruction)  
 

#UEG0680S0208
 

1V-6390: CONTROL GP-HAND

1V6390 HAND CONTROL GROUP--Rear
Part of 6K5465 and 6K389 Hydraulic Control Arrangements and 6K5468
Conversion Arrangement listed on Pages 113 and 114
c149103 UEG0680S
1V6390 CONTROL GP-HAND Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1C-2251 [1] BOLT  
  1D-4717 [1] NUT  
2. 6K-5555 [1] LEVER  
  1B-8706 [1] KEY  
3. 0L-1170 [1] HANDLE  
4. 5B-9079 [1] NUT  
5. 3B-4506 [6] LOCKWASHER  
6. 8B-8679 [1] SPACER  
7. 0L-0478 [1] BOLT  
8. 4H-1394 [3] WASHER  
9. 5K-9883 [1] HOUSING ASSEM.  
10. 1B-4205 [2] NUT  
  3B-4508 [2] LOCKWASHER  
11. 1V-6391 [1] LEVER ASSEM.  
12. 6K-4442 [2] BALLJOINT ASSEM.  
  1B-4430 [2] NUT  
  4J-1722 [1] ROD  
13. 2S-6160 [1] WASHER  
14. 0S-1594 [5] BOLT  
15. 0S-0175 [2] PIN  
  3B-4617 [2] COTTER PIN  
16. 8F-1786 [1] ROD  
17. 6K-4565 [1] STRIP ASSEM.  
18. 9F-2978 [4] NUT  
    (2 in each 6K4565 & 6K4563 Assem.)
19. 6K-4566 [1] COVER  
20. 6K-4563 [1] BAR ASSEM.  
21. 2J-7148 [1] LEVER  
22. 6D-5974 [4] BEARING  
 

#UEG0680S0209
 

2V-4380: HYDRAULIC HAND CONTROL GROUP

2V4380 HYDRAULIC HAND CONTROL GROUP--Front
Part of 6K386 and 6K389 Arrangements listed on Page 113
AN ATTACHMENT
c154566 UEG0680S
2V4380 HYDRAULIC HAND CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-5974 [2] BEARING  
2. 1B-0676 [1] PIN  
  3B-4615 [1] COTTER PIN  
3. 1A-9252 [1] ROD END  
4. 5B-9079 [1] NUT  
5. 6K-4765 [1] ROD  
6. 1B-4430 [1] NUT  
7. 6K-4442 [1] BALLJOINT ASSEM.  
8. 1B-4205 [1] NUT  
  3B-4508 [1] LOCKWASHER  
9. 2V-4378 [1] LEVER  
10. 0L-1170 [1] HANDLE  
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Relief Valve (Rod End Of Tilt Cylinder)<BR> (5J9106)
941B & 951C TRACK-TYPE LOADER HYDRAULIC SYSTEM
Relief Valve (Head End Of Tilt Cylinder)<BR> (5J9107)
941B & 951C TRACK-TYPE LOADER HYDRAULIC SYSTEM
Cylinders
941B & 951C TRACK-TYPE LOADER HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Tilt Lines Hose Prevents Failure{5057,5104}
1983/09/12
Use New Drift Rate Chart When Testing And Troubleshooting Cylinder Drift In Hydraulic Circuits{5050,5100}
1979/04/02
Stronger Tube Assembly Used In Tilt Cylinder Lines Group{5057}
1979/06/11
Service Brace Is Used With New Lift Arm{0643,5102,6119}
1979/08/20
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 941 :

LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
TILT CYLINDER GROUP
7J-9750 TILT CYLINDER GROUP
TILT CYLINDER GROUP
8J-5937 TILT CYLINDER GROUP
LIFT CYLINDER GROUP
7J-9862 LIFT CYLINDER GROUP
LIFT CYLINDER GROUP
7J-9861 LIFT CYLINDER GROUP
CYLINDER GROUP
7J-6789 CYLINDER GROUP
CYLINDER GROUP
8J-5663 CYLINDER GROUP
HYDRAULIC PUMP ASSEMBLY
8J-8367 HYDRAULIC PUMP ASSEMBLY
LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
LINES GP-CYLINDER
7K-4878 LINES GP-CYLINDER
LINES GP-TILT CYLINDER
6K-4145 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
6K-4145 LINES GP-TILT CYLINDER
HYDRAULIC HAND CONTROL GROUP
5K-9646 HYDRAULIC HAND CONTROL GROUP
HAND CONTROL GROUP
6K-0252 HAND CONTROL GROUP
HYDRAULIC HAND CONTROL GROUP
2V-4379 HYDRAULIC HAND CONTROL GROUP
CONTROL GP-HAND
1V-6390 CONTROL GP-HAND

Truck sale:

Caterpillar 941, Construction
3,000 
Caterpillar 941, Construction
- track loaders
MICHIGAN CAT
7038 - CAT 941
 
7038 - CAT 941

avspare
1974 CAT 941
USD $13,750 
1974 CAT 941

WESTERN MICHIGAN EQUIPMENT
Traverse City, Michigan
1980 CAT 941
Call 
1980 CAT 941

DDG Equipment
1974 CAT 941
USD $5,500 
1974 CAT 941

RP Equipment
Allentown, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.