AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D4D TRACTOR / DIRECT DRIVE / 82J03444-04150 (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 82J
 D4D TRACTOR / DIRECT DRIVE / 82J03444-04150 (MACHINE) UEG0681S D4D 82J   (1968)

Parts group D4D:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
9D-1460 ALTERNATOR AR
9D1460 ALTERNATOR ARRANGEMENT--24 Volt, 50 Ampere
FACTORY INSTALLATION
AN ATTACHMENT
ALTERNATOR GP-CHARGING
5S-9088 ALTERNATOR GP-CHARGING
5S9088 ALTERNATOR ASSEMBLY--24 Volt, 50 Ampere--Part 1 of 2--Type 1
Part of 9S6693 Alternator Group listed on Page 27
AN ATTACHMENT
5S-9088 ALTERNATOR GP-CHARGING
5S9088 ALTERNATOR ASSEMBLY--24 Volt, 50 Ampere--Part 2 of 2--Type 1
Part of 9S6693 Alternator Group listed on Page 27
AN ATTACHMENT
ALTERNATOR GP-CHARGING
5S-9088 ALTERNATOR GP-CHARGING
5S9088 ALTERNATOR ASSEMBLY--24 Volt, 50 Ampere--Part 1 of 2--Type 2
Part of 9S6693 Alternator Group listed on Page 27
AN ATTACHMENT
5S-9088 ALTERNATOR GP-CHARGING
5S9088 ALTERNATOR ASSEMBLY--24 Volt, 50 Ampere--Part 2 of 2--Type 2
Part of 9S6693 Alternator Group listed on Page 27
AN ATTACHMENT
BATTERY GP
BATTERY AND WIRING
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from Rear Right Hand Side of Machine--Part 1 of 2
Serial No. 82J3444 to 82J3650 inclusive. 7H7290 Switch parts are shown on Page 27
See Page 26 for Wiring Diagram
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from Rear Right Hand Side of Machine--Part 2 of 2
Serial No. 82J3444 to 82J3650 inclusive. See Page 26 for Wiring Diagram
BATTERY AND WIRING
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 1 of 2
Serial No. 82J3651 to 82J3715 inclusive. 7H7290 Switch parts are shown on Page 27
See Page 26A for Wiring Diagram
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8k6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 2 of 2
Serial No. 82J3651 to 82J3715 inclusive
See Page 26A for Wiring Diagram
BATTERY AND WIRING
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 1 of 3
Serial No. 82J3716-Up. 7H7290 Switch parts are shown on Page 27
See Page 26A for Wiring Diagram
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 2 of 3
Serial No. 82J3716-Up. See Page 26A for Wiring Diagram
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 3 of 3
Serial No. 82J3716-Up. See Page 26A for Wiring Diagram
WIRING DIAGRAM
WIRING DIAGRAM
WIRING DIAGRAM--24 Volt System
Serial No. 82J3444 to 82J3650 inclusive
WIRING DIAGRAM
WIRING DIAGRAM
WIRING DIAGRAM--24 Volt System
Serial No. 82J3651-Up
BATTERY GROUP
6K-9258 BATTERY GROUP
6K9258 BATTERY GROUP
Part of 1P5068 Direct Electric Starting Arrangement listed on Page 30
AN ATTACHMENT
LIGHTING GP
LIGHTING GROUP
6K-7839 LIGHTING GROUP
6K7839 LIGHTING GROUP--24 Volt--4 Lamp--Part 1 of 2
9H6338 and 1M1882 Lamp parts are shown on Page 42
AN ATTACHMENT
6K-7839 LIGHTING GROUP
6K7839 LIGHTING GROUP--24 Volt--4 Lamp--Part 2 of 2
1M1882 Lamp parts are shown on Page 42
AN ATTACHMENT
LIGHTING GROUP
6K-8800 LIGHTING GROUP
6K8800 LIGHTING GROUP--24 Volt--2 Lamp--Part 1 of 2
AN ATTACHMENT
6K-8800 LIGHTING GROUP
6K8800 LIGHTING GROUP--24 Volt--2 Lamp--Part 2 of 2
9H6338 and 1M1882 Lamp parts are shown on Page 42
AN ATTACHMENT
WIRING AND LIGHTING GROUP
1V-6335 WIRING AND LIGHTING GROUP
1V6335 WIRING AND LIGHTING GROUP--4 Lamp--Part 1 of 2
1M1882 Lamp parts are shown on Page 42. FOR USE WITH 1V394 CAB ARRANGEMENT AND 9K8382 MOUNTING
GROUP SHOWN ON PAGES 104D, 106B AND 107. AN ATTACHMENT
1V-6335 WIRING AND LIGHTING GROUP
1V6335 WIRING AND LIGHTING GROUP--4 Lamp--Part 2 of 2
1M1882 and 9H6338 Lamp parts are shown on Page 42. FOR USE WITH 1V394 CAB ARRANGEMENT AND
9K8382 MOUNTING GROUP SHOWN ON PAGES 104D, 106B AND 107. AN ATTACHMENT
FLOOD LAMP ASSEMBLY
4K-8033 FLOOD LAMP ASSEMBLY
4K8033 FLOOD LAMP ASSEMBLY--24 Volt
Part of 1V6326 Lighting and Wiring Group shown on Pages 41D & 41E
LIGHTING AND WIRING GROUP
1V-6326 LIGHTING AND WIRING GROUP
1V6326 LIGHTING AND WIRING GROUP--4 Lamp--Type 1
4K8033, 1M1882 and 9H6338 Lamp parts are shown on Pages 41C and 42
FOR USE WITH 1V394 CAB ARRANGEMENT SHOWN ON PAGE 104D. AN ATTACHMENT
LAMP GP-DASH
9H-6338 LAMP GP-DASH
9H6338 DASH LAMP ASSEMBLY--24 Volt
Part of 6K7839, 6K8800, 1V6335 and 1V6326 Lighting Groups shown
on Pages 38, 41, 41B and 41C. AN ATTACHMENT
LAMP GP
1M-1882 LAMP GP
1M1882 FLOOD LAMP ASSEMBLY--24 Volt
Part of 6K7839, 6K8800, 1V6335 and 1V6326 Lighting Groups shown on
Pages 38, 39, 41, 41A, 41B and 41C
DOME LIGHTING GROUP
1V-4458 DOME LIGHTING GROUP
1V4458 DOME LIGHTING GROUP
FOR USE WITH 1V394 CAB ARRANGEMENT LISTED ON PAGE 104D
AN ATTACHMENT
FLOOD LAMP ASSEMBLY
4K-8033 FLOOD LAMP ASSEMBLY
4K8033 FLOOD LAMP ASSEMBLY--24 Volt
Part of 1V6326 Lighting and Wiring Group shown on Page 104P
LIGHTING AND WIRING GROUP
1V-6335 LIGHTING AND WIRING GROUP
1V6335 LIGHTING AND WIRING GROUP--4 Lamp--Part 1 of 2
FOR USE WITH 1V394 CAB ARRANGEMENT AND ROLL-OVER PROTECTIVE STRUCTURE
1M1882 Lamp parts are shown on Page 42. AN ATTACHMENT
1V-6335 LIGHTING AND WIRING GROUP
1V6335 LIGHTING AND WIRING GROUP--4 Lamp--Part 2 of 2
FOR USE WITH 1V394 CAB ARRANGEMENT AND ROLL-OVER PROTECTIVE STRUCTURE
9H6338 and 1M1882 Lamp parts are shown on Page 42. AN ATTACHMENT
LIGHTING AND WIRING GROUP
1V-6326 LIGHTING AND WIRING GROUP
1V6326 LIGHTING AND WIRING GROUP--4 Lamp
FOR USE WITH 1V394 CAB ARRANGEMENT. FOR USE WITHOUT ROLL-OVER PROTECTIVE
STRUCTURE. 9H6338, 1M1882 and 4K8033 Lamp parts are shown on Pages 42 and 104L
AN ATTACHMENT
SOLENOID GP
SOLENOID AS
9S-7976 SOLENOID AS
9S7976 SOLENOID SWITCH ASSEMBLY--24 Volt
Part of 2P6162 Starting Motor Group shown on Page 34
AN ATTACHMENT
STARTING AR
1P-5068 DIRECT ELECTRIC STARTING ARRANGEMENT
1P5068 DIRECT ELECTRIC STARTING ARRANGEMENT--24 Volt
FOR USE IN TEMPERATURES OF 0 DEGREES FAHRENHEIT OR BELOW
AN ATTACHMENT
STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
7S-3622 STARTING MOTOR GP-ELECTRIC
7S3622 STARTING MOTOR GROUP--24 Volt--Type 1
Part of 1P5068 Direct Electric Starting Arrangement. 2P6162 Motor parts are shown
on Pages 34 & 34A. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
7S-3622 STARTING MOTOR GP-ELECTRIC
7S3622 STARTING MOTOR GROUP--24 Volt--Type 2
Part of 1P5068 Direct Electric Starting Arrangement listed on Page 30. 4N3182 and
4N7752 Starting Motor parts are shown on Pages 31, 32, 33, 33A, 33B, 33D, 34B & 35
STARTING MOTOR GP-ELECTRIC
4N-3182 STARTING MOTOR GP-ELECTRIC
4N3182 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 1 of 3--Type 1
Part of 7S3622 Starting Motor Group shown on Pages 30 and 30A. 6N5123 Switch parts are shown on Page 36
AN ATTACHMENT
4N-3182 STARTING MOTOR GP-ELECTRIC
4N3182 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 2 of 3--Type 1
Part of 7S3622 Starting Motor Group shown on Pages 30 and 30A. Only separate parts serviced
When complete Group is required order 4N3181. AN ATTACHMENT
4N-3182 STARTING MOTOR GP-ELECTRIC
4N3182 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 3 of 3--Type 1
Part of 7S3622 Starting Motor Group shown on Pages 30 & 30A. Only separate parts serviced
When complete Group is required order 4N3181. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
4N-3182 STARTING MOTOR GP-ELECTRIC
4N3182 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 1 of 3--Type 2
Part of 7S3622 Starting Motor Group shown on Pages 30 & 30A
4M1812 Switch parts are shown on Page 37. AN ATTACHMENT
4N-3182 STARTING MOTOR GP-ELECTRIC
4N3182 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 2 of 3--Type 2
Part of 7S3622 Starting Motor Group shown on Pages 30 and 30A. AN ATTACHMENT
4N-3182 STARTING MOTOR GP-ELECTRIC
4N3182 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 3 of 3--Type 2
Part of 7S3622 Starting Motor Group shown on Pages 30 and 30A. AN ATTACHMENT
ELECTRIC STARTING MOTOR GROUP
2P-6162 ELECTRIC STARTING MOTOR GROUP
2P6162 ELECTRIC STARTING MOTOR GROUP--Prestolite--24 Volt--Part 1 of 2
Part of 7S3622 Starting Motor Group shown on Page 30
9S7976 Switch Parts are shown on Page 36. Only separate parts serviced. When complete Group is required
order 4N3181. AN ATTACHMENT
2P-6162 ELECTRIC STARTING MOTOR GROUP
2P6162 ELECTRIC STARTING MOTOR GROUP--Prestolite--24 Volt--Part 2 of 2
Part of 7S3622 Starting Motor Group shown on Page 30. Only separate parts serviced
When complete Group is required order 4N3181. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
4N-7752 STARTING MOTOR GP-ELECTRIC
4N7752 ELECTRIC STARTING MOTOR GROUP--Prestolite--Part 1 of 2
Part of 7S3622 Starting Motor Group shown on Page 30A. 9S7976 Switch parts are shown on Page 36
Only separate parts serviced. When complete Group is required order 4N3181
4N-7752 STARTING MOTOR GP-ELECTRIC
4N7752 ELECTRIC STARTING MOTOR GROUP--Prestolite--Part 2 of 2
Part of 7S3622 Starting Motor Group shown on Page 30A
Only separate parts serviced. When complete Group is required order 4N3181
SWITCH GP
SWITCH AS-DISCONNECT
7H-7290 SWITCH AS-DISCONNECT
7H7290 DISCONNECT SWITCH ASSEMBLY
Part of Battery and Wiring shown on Page 24
SWITCH AS-SOLENOID
6N-5123 SWITCH AS-SOLENOID
6N5123 SOLENOID SWITCH ASSEMBLY--24 Volt
Part of 4N3182 Starting Motor Group shown on Page 31
AN ATTACHMENT
SWITCH AS-SOLENOID
4M-1812 SWITCH AS-SOLENOID
4M1812 SOLENOID SWITCH ASSEMBLY
Part of 4N3182 Electric Starting Motor Group shown on Page 33A
WIRING GP
BATTERY AND WIRING
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from Rear Right Hand Side of Machine--Part 1 of 2
Serial No. 82J3444 to 82J3650 inclusive. 7H7290 Switch parts are shown on Page 27
See Page 26 for Wiring Diagram
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from Rear Right Hand Side of Machine--Part 2 of 2
Serial No. 82J3444 to 82J3650 inclusive. See Page 26 for Wiring Diagram
BATTERY AND WIRING
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 1 of 2
Serial No. 82J3651 to 82J3715 inclusive. 7H7290 Switch parts are shown on Page 27
See Page 26A for Wiring Diagram
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8k6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 2 of 2
Serial No. 82J3651 to 82J3715 inclusive
See Page 26A for Wiring Diagram
BATTERY AND WIRING
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 1 of 3
Serial No. 82J3716-Up. 7H7290 Switch parts are shown on Page 27
See Page 26A for Wiring Diagram
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 2 of 3
Serial No. 82J3716-Up. See Page 26A for Wiring Diagram
8K-6883 BATTERY AND WIRING
BATTERY AND WIRING (8K6883 N/S)--24 Volt--As Viewed from R.H. Side of Machine--Part 3 of 3
Serial No. 82J3716-Up. See Page 26A for Wiring Diagram
WIRING DIAGRAM
WIRING DIAGRAM
WIRING DIAGRAM--24 Volt System
Serial No. 82J3444 to 82J3650 inclusive
WIRING DIAGRAM
WIRING DIAGRAM
WIRING DIAGRAM--24 Volt System
Serial No. 82J3651-Up
WIRING AND LIGHTING GROUP
1V-6335 WIRING AND LIGHTING GROUP
1V6335 WIRING AND LIGHTING GROUP--4 Lamp--Part 1 of 2
1M1882 Lamp parts are shown on Page 42. FOR USE WITH 1V394 CAB ARRANGEMENT AND 9K8382 MOUNTING
GROUP SHOWN ON PAGES 104D, 106B AND 107. AN ATTACHMENT
1V-6335 WIRING AND LIGHTING GROUP
1V6335 WIRING AND LIGHTING GROUP--4 Lamp--Part 2 of 2
1M1882 and 9H6338 Lamp parts are shown on Page 42. FOR USE WITH 1V394 CAB ARRANGEMENT AND
9K8382 MOUNTING GROUP SHOWN ON PAGES 104D, 106B AND 107. AN ATTACHMENT
LIGHTING AND WIRING GROUP
1V-6326 LIGHTING AND WIRING GROUP
1V6326 LIGHTING AND WIRING GROUP--4 Lamp--Type 1
4K8033, 1M1882 and 9H6338 Lamp parts are shown on Pages 41C and 42
FOR USE WITH 1V394 CAB ARRANGEMENT SHOWN ON PAGE 104D. AN ATTACHMENT
LIGHTING AND WIRING GROUP
1V-6326 LIGHTING AND WIRING GROUP
1V6326 LIGHTING AND WIRING GROUP--4 Lamp--Part 1 of 2--Type 2
4K8033 and 1M1882 Lamp parts are shown on Pages 41C and 42
FOR USE WITH 1V394 CAB ARRANGEMENT SHOWN ON PAGE 104D
FOR USE WITHOUT ROLL-OVER PROTECTIVE STRUCTURE. AN ATTACHMENT
1V-6326 LIGHTING AND WIRING GROUP
1V6326 LIGHTING AND WIRING GROUP--4 Lamp--Part 2 of 2--Type 2
9H6338 Lamp parts are shown on Page 42
FOR USE WITH 1V394 CAB ARRANGEMENT SHOWN ON PAGE 104D
FOR USE WITHOUT ROLL-OVER PROTECTIVE STRUCTURE. AN ATTACHMENT
AIR CONDITIONER WIRING GROUP
1V-2588 AIR CONDITIONER WIRING GROUP
1V2588 AIR CONDITIONER WIRING GROUP
Serial No. 82J3651-Up
Part of 1V739 Air Conditioner Arrangement listed on Page 94
HARNESS ASSEMBLY
1V-6327 HARNESS ASSEMBLY
1V6327 HARNESS ASSEMBLY
Part of 2V5495 Cab Wiring Group shown on Page 104E
AN ATTACHMENT
CAB WIRING GROUP
2V-5495 CAB WIRING GROUP
2V5495 CAB WIRING GROUP
Part of 1V394 Cab Arrangement listed on Page 104D
1V6327 Harness parts are shown on Page 104D. AN ATTACHMENT
HARNESS ASSEMBLY
3V-0797 HARNESS ASSEMBLY
3V797 HARNESS ASSEMBLY
Part of 9K8625 and 4V3101 Cab Groups shown on Pages 104E-4 and 104E-5c
AN ATTACHMENT
LIGHTING AND WIRING GROUP
1V-6335 LIGHTING AND WIRING GROUP
1V6335 LIGHTING AND WIRING GROUP--4 Lamp--Part 1 of 2
FOR USE WITH 1V394 CAB ARRANGEMENT AND ROLL-OVER PROTECTIVE STRUCTURE
1M1882 Lamp parts are shown on Page 42. AN ATTACHMENT
1V-6335 LIGHTING AND WIRING GROUP
1V6335 LIGHTING AND WIRING GROUP--4 Lamp--Part 2 of 2
FOR USE WITH 1V394 CAB ARRANGEMENT AND ROLL-OVER PROTECTIVE STRUCTURE
9H6338 and 1M1882 Lamp parts are shown on Page 42. AN ATTACHMENT
LIGHTING AND WIRING GROUP
1V-6326 LIGHTING AND WIRING GROUP
1V6326 LIGHTING AND WIRING GROUP--4 Lamp
FOR USE WITH 1V394 CAB ARRANGEMENT. FOR USE WITHOUT ROLL-OVER PROTECTIVE
STRUCTURE. 9H6338, 1M1882 and 4K8033 Lamp parts are shown on Pages 42 and 104L
AN ATTACHMENT
HEATER GP
HEATER GP-JACKET WATER
4N-3586 HEATER GP-JACKET WATER
4N3586 JACKET WATER HEATER GROUP--Type 1
AN ATTACHMENT
HEATER GP-JACKET WATER
4N-3586 HEATER GP-JACKET WATER
4N3586 JACKET WATER HEATER GROUP--Type 2
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternators
3304 VEHICULAR ENGINE
Alternator Regulator
3304 VEHICULAR ENGINE
Generators
3304 VEHICULAR ENGINE
Generator Regulators
3304 VEHICULAR ENGINE
Alternator
26SI Series Alternator
Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator
N3 Series Brushless Alternators
Systems Operation
General Information
26SI Series Alternator
Component Description
26SI Series Alternator
Normal Operation
26SI Series Alternator
General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators
Normal Operation
HDB Series and M1 Series Heavy Duty Brushless Alternators
Component Description
HDB Series and M1 Series Heavy Duty Brushless Alternators
General Information
N3 Series Brushless Alternators
Component Description
N3 Series Brushless Alternators
Normal Operation
N3 Series Brushless Alternators
Testing and Adjusting
T1 Alternator Output - Test
26SI Series Alternator
T2 Electrical System Current - Test
26SI Series Alternator
T3 Charging System - Test
26SI Series Alternator
T4 Alternator Drive System - Check
26SI Series Alternator
T5 Alternator Current - Test
26SI Series Alternator
T6 Residual Magnetism Restoration
26SI Series Alternator
T7 Identifying Source of Current Draw - Test
26SI Series Alternator
T8 Alternator Overcharging - Test
26SI Series Alternator
Initial Troubleshooting Procedure
26SI Series Alternator
General Information
26SI Series Alternator
Component - Test
26SI Series Alternator
Field Winding - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Capacitor - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Stator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Rectifier - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Residual Magnetism - Restore
HDB Series and M1 Series Heavy Duty Brushless Alternators
Regulator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Field Winding - Test
N3 Series Brushless Alternators
Capacitor - Test
N3 Series Brushless Alternators
Rectifier - Test
N3 Series Brushless Alternators
Stator - Test
N3 Series Brushless Alternators
Regulator - Test
N3 Series Brushless Alternators
Troubleshooting
General Information
N3 Series Brushless Alternators
Charging System
HDB Series and M1 Series Heavy Duty Brushless Alternators
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Disassembly and Assembly
Alternator
D4 TRACTOR ENGINE
Alternator - Assemble
26SI Series Alternator
Alternator - Disassemble
26SI Series Alternator
Alternator - Disassemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble
N3 Series Brushless Alternators
Alternator - Disassemble
N3 Series Brushless Alternators
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Correction to Serial Numbers for "Alternator Debris Guard Available" {1405}
2001/09/10
Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/11/19
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Engine News
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Troubleshooting
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Disassembly and Assembly
Batteries And Battery Boxes
D4D TRACTOR POWER TRAIN
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Special Instruction
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
A New Handheld Digital Manometer is Now Available {7490}
A New Handheld Digital Manometer is Now Available {7490}
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Magazine
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Special Instruction
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Specifications
Glow Plug Positioning
3304 VEHICULAR ENGINE
Disassembly and Assembly
Glow Plugs
D4 TRACTOR ENGINE
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Special Instruction
Installation of CAESultra for Track-Type Tractors{7010, 733T, 7490, 7604}
Installation of CAESultra for Track-Type Tractors{7010, 733T, 7490, 7604}
Service Magazine
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13
Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Service Magazine
Caterpillar Electric Starting Motors{1453,1407}
1982/03/22
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New Electric Starting Motor Has Longer Brush Life{1453}
1977/11/14
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29
Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Glow Plug Positioning
3304 VEHICULAR ENGINE
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Glow Plugs
D4 TRACTOR ENGINE
Batteries And Battery Boxes
D4D TRACTOR POWER TRAIN
Service Magazine
Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14
Neutral Start Circuit Added To Prevent Operation Of The Electric Starting Motor When The Transmission Is In Gear{1424,3060,3065,3070,1453,1408}
1980/12/01
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
New Electric Starting Motor Has Longer Brush Life{1453}
1977/11/14
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Instructions for the 174-1508 Electric Motor {5927}
Installation Instructions for the 174-1508 Electric Motor {5927}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2001/01/22
Special Instruction, SEHS9088-01, May 2001, "Installation Instructions for the 174-1508 Electric Motor is Now Available" {5927}
2001/06/18
An Improved Starting Motor is Now Available {1453}
2007/10/15
A New Starter Solenoid is Now Available {1467}
2008/03/17
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Alternator Regulator
3304 VEHICULAR ENGINE
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Specifications
Starter Solenoids
3304 VEHICULAR ENGINE
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Neutral Start Circuit Added To Prevent Operation Of The Electric Starting Motor When The Transmission Is In Gear{1424,3060,3065,3070,1453,1408}
1980/12/01
Specifications
Glow Plug Positioning
3304 VEHICULAR ENGINE
Disassembly and Assembly
Glow Plugs
D4 TRACTOR ENGINE
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/19
Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starter Motors
3304 VEHICULAR ENGINE
Starter Magnetic Switches
3304 VEHICULAR ENGINE
Starter Solenoids
3304 VEHICULAR ENGINE
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Testing and Adjusting
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Starting Motor
D4 TRACTOR ENGINE
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Magazine
Neutral Start Circuit Added To Prevent Operation Of The Electric Starting Motor When The Transmission Is In Gear{1424,3060,3065,3070,1453,1408}
1980/12/01
Caterpillar Electric Starting Motors{1453,1407}
1982/03/22
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
New Electric Starting Motor Has Longer Brush Life{1453}
1977/11/14
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
Special Instruction, REHS1129, "Starting Motor Solenoid - Replace" Is Available {1467}
2001/08/13
Improved Remanufactured Heavy-Duty Electrical Starting Motors Are Available {1453}
2001/10/29
Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/11/19
New Starting Motors Used {1453}
2002/05/13
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}
Specifications
Coolant Flow Switch
3304 VEHICULAR ENGINE
Starter Magnetic Switches
3304 VEHICULAR ENGINE
Oil Pressure Switch
3304 VEHICULAR ENGINE
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/05/04
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/07/18
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/01
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/01
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Service Tools
HDB Series and M1 Series Heavy Duty Brushless Alternators
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools
Product Link - PL522/523
Service Tools
Product Link 121S/300
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/01
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/09/25
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Service Magazine
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Glow Plug Positioning
3304 VEHICULAR ENGINE
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Testing and Adjusting
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
Troubleshooting
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Glow Plugs
D4 TRACTOR ENGINE
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
New Temperature Indicators May Require an Adapter {0758}
2003/07/14
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Service Magazine
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation of Cat<SUP>&reg;</SUP> Terrain v4.5 for Track-Type Tractors {7605}
Installation of Cat® Terrain v4.5 for Track-Type Tractors {7605}
Installation of G610 Hardware for Cat<SUP>&reg;</SUP> Terrain for Track-Type Tractors {7605}
Installation of G610 Hardware for Cat® Terrain for Track-Type Tractors {7605}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Of Operator ID System on Cat<SUP>&reg;</SUP> and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Technical Information Bulletin
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Tool Operating Manual
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/06/07
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/10/03
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Phone Number for VIMS Support Is Now Available for All Cat<SUP>&reg;</SUP> Products Equipped with VIMS {7601}
2015/03/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
A New Handheld Digital Manometer is Now Available {7490}
A New Handheld Digital Manometer is Now Available {7490}
How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18
New Bracket Available For Installation Of Jacket Water Heater{1383}
1979/09/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
Operation and Maintenance Manual
Product Link
Product Link - PL121, PL321, PL522, and PL523
General Hazard Information
Product Link - PL121, PL321, PL522, and PL523
Safety Signs and Labels
Product Link - PL121, PL321, PL522, and PL523
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
Product Link PL-102C System Installation{7606}
Product Link PL-102C System Installation{7606}
Product Link PL-102C{7602}
Product Link PL-102C{7602}
Installation Guide for Product Link PL121SR and PL321{7606}
Installation Guide for Product Link PL121SR and PL321{7606}
Operation of Product Link{7606}
Operation of Product Link{7606}
Product Link PL121SR{7606}
Product Link PL121SR{7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Product Link<SUP>TM</SUP> PL421 Installation Quick Reference Guide{7606}
Product LinkTM PL421 Installation Quick Reference Guide{7606}
Installation of Remote Disable Module (RDM) Kit on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Technical Information Bulletin
Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Product Link Antenna Placement{7606}
Product Link Antenna Placement{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
Product Link Registration Problems{733T, 7606}
Product Link Registration Problems{733T, 7606}
Product Link PL321 May Accumulate 24 Hours Daily{7606}
Product Link PL321 May Accumulate 24 Hours Daily{7606}
Registration of Product Link in EquipmentManager{7606}
Registration of Product Link in EquipmentManager{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
Improper Customer Access and Asset Merging Within VisionLink<SUP>TM</SUP> and PartStore<SUP>TM</SUP> Through UCID Consolidation{7567, 7606}
Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606}
Product Link Machine Information Is Not Being Reported On Cat<SUP>&reg;</SUP> Products Located in India{7606}
Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Systems Operation
System Overview
Product Link 121S/300
Manage Hardware
EquipmentManager Dealer Administrator Manual
Manage Time Fence and Geographic Fence
EquipmentManager User Guide
Manage Planned Maintenance
EquipmentManager User Guide
Time Fence and Geographic Fence
EquipmentManager User Guide
Health Watch
EquipmentManager User Guide
Product Monitoring
EquipmentManager Dealer Administrator Manual
Operation and Maintenance Manual
EquipmentManager Dealer Administrator Manual
Equipment Usage
EquipmentManager User Guide
Verify Machine Records and Ownership
EquipmentManager User Guide
Manage Equipment Groups
EquipmentManager User Guide
Fuel Results
EquipmentManager Dealer Administrator Manual
Planned Maintenance
EquipmentManager User Guide
General Information
EquipmentManager User Guide
Getting Started
EquipmentManager User Guide
Enable Program
EquipmentManager Dealer Administrator Manual
Manage Users
EquipmentManager User Guide
Product Link Installation
EquipmentManager User Guide
Setup Subscriptions
EquipmentManager Dealer Administrator Manual
Administration
EquipmentManager User Guide
Manage Equipment Groups
EquipmentManager Dealer Administrator Manual
Manage Event Tracking
EquipmentManager Dealer Administrator Manual
Upload Data
EquipmentManager Dealer Administrator Manual
Manage Planned Maintenance
EquipmentManager Dealer Administrator Manual
Preferences
EquipmentManager User Guide
Asset Watch
EquipmentManager User Guide
Maintenance Watch
EquipmentManager User Guide
Major Repair
EquipmentManager Dealer Administrator Manual
Fault Codes
EquipmentManager Dealer Administrator Manual
Preference Detail
EquipmentManager Dealer Administrator Manual
Reports
EquipmentManager Dealer Administrator Manual
Active Fleet
EquipmentManager Dealer Administrator Manual
Product Usage
EquipmentManager User Guide
Verify Machine Records and Ownership
EquipmentManager Dealer Administrator Manual
Manage Major Repair Tracking
EquipmentManager User Guide
System Overview
Product Link - PL522/523
System Components
Product Link - PL522/523
Configuration
Product Link - PL522/523
Installation Parameters Configure
Product Link - PL522/523
Spare Input Configure
Product Link - PL522/523
Commands
Product Link - PL522/523
System Components
Product Link 121S/300
Spare Inputs
Product Link 121S/300
Configuration
Product Link 121S/300
Installation Parameters Configure
Product Link 121S/300
Report Parameters Configure
Product Link 121S/300
Wireless Service Configure
Product Link 121S/300
Spare Input Configure
Product Link 121S/300
Commands
Product Link 121S/300
Testing and Adjusting
Electronic Control Module (ECM) - Flash Program
Product Link - PL522/523
Electronic Control Module (ECM) - Replace
Product Link - PL522/523
Specifications
Product Link - PL522/523
Electronic Control Module (ECM) - Flash Program
Product Link 121S/300
Electronic Control Module (ECM) - Replace
Product Link 121S/300
Specifications
Product Link 121S/300
Troubleshooting
General Information
Product Link - PL522/523
Diagnostic Capabilities
Product Link - PL522/523
Electronic Service Tool Does Not Communicate with ECM
Product Link - PL522/523
Reports and Messages Not Available
Product Link - PL522/523
Position Reports Not Available
Product Link - PL522/523
Reporting Interval Erratic
Product Link - PL522/523
Diagnostics and Events Not Available
Product Link - PL522/523
Operating Hours Discrepancy
Product Link - PL522/523
Diagnostic Code List
Product Link - PL522/523
MID 161 - CID 0254 - FMI 04
Product Link - PL522/523
MID 161 - CID 0254 - FMI 12
Product Link - PL522/523
MID 161 - CID 1250 - FMI 09
Product Link - PL522/523
MID 161 - CID 1888 - FMI 14
Product Link - PL522/523
MID 161 - CID 3766- FMI 14
Product Link - PL522/523
General Information
Product Link 121S/300
Diagnostic Capabilities
Product Link 121S/300
Electronic Service Tool Does Not Communicate with ECM
Product Link 121S/300
Position Reports Not Available
Product Link 121S/300
Reporting Interval Erratic
Product Link 121S/300
Diagnostics and Events Not Available
Product Link 121S/300
Operating Hours Discrepancy
Product Link 121S/300
Diagnostic Code List
Product Link 121S/300
MID 122 - CID 0254 - FMI 04
Product Link 121S/300
MID 122 - CID 0254 - FMI 12
Product Link 121S/300
MID 122 - CID 1250 - FMI 09
Product Link 121S/300
ECM Does Not Communicate with User Interface
Product Link 121S/300
Service Magazine
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
New Version of Product Link Available {7602}
2001/08/27
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
New Flexible Antenna Whip Available for Product Link {7606}
2002/12/02
New Flash File Software Is Used for Product Link 151/201 {7620}
2003/03/10
New Software Is Used on Product Link 151/201 {7606, 7620}
2003/09/01
Product Link Cellular Is Now Available {7602}
2004/08/02
Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
2004/08/02
Correction to Special Instruction, &quot;Product Link PL102C System Installation&quot; and Systems Operation, Testing and Adjust, &quot;Product Link PL102C&quot; {7602}
2004/12/13
New PC Service Tool Software Released for Cellular Based Product Link {7620}
2004/12/20
Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
2004/12/13
Procedure to Identify which COM PORT the USB Device Is Occupying and the Procedure to Change the Default COM PORT Setting {7606}
2005/01/10
New Product Link Software Available for PL151 and PL201 {7606}
2005/01/10
New Product Link Systems Are Now Available {7606}
2005/02/07
New Software Available for Product Link PL-151 and PL-201 {7620}
2005/05/02
New Product Link Software Is Now Available {7606, 7620}
2005/12/19
New Software Available for Product Link {7606, 7620}
2006/10/16
New Product Link Software Is Now Available {7606, 7620}
2007/05/14
New Product Link Hardware Is Now Available {7606}
2008/03/17
New Processes Improve Registration of Product Link {7338, 7606}
2008/04/14
New Software for Product Link is Now Available {7606, 7620}
2008/03/10
New Software for Product Link is Now Available {7606, 7620}
2008/05/19
New Software is Now Used for the Product Link PL121SR and PL321SR Systems {7606, 7620}
2009/10/15
New Product Link Cellular Is Released for All Cat Products {7606}
2011/03/04
New Software Is Now Released for Product Link PL522/523 Systems On All Cat Product {7606}
2011/05/12
A New Product Link Registration/Activation Process Now Available For Product Link (PL) 522 and 523 {7606}
2011/08/31
New Software for Product Link (PL300) Is Now Available {7606, 7620}
2011/10/11
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
New Software Is Now Available for Product Link (PL 121) {7602, 7610, 7620}
2011/12/15
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/10/03
Improved Process for Activating Product Link PL522 On Assets In China {7606}
2012/11/19
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/02/16
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/05/28
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606}
2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606}
2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606}
2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620}
2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606}
2013/09/27
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/07/08
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606}
2013/09/16
Improvements for Products and Systems Connected to Product Link {7606}
2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620}
2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2013/10/02
Improved Product Link Satellite System Special Instruction guide {7606}
2013/12/20
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/03/04
Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
2015/02/17
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/06/24
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Special Instruction
Generic Installation of the WAVS Cleaning System{7348}
Generic Installation of the WAVS Cleaning System{7348}
WAVS Installation Guide for Generic Applications{7347, 7348}
WAVS Installation Guide for Generic Applications{7347, 7348}
WAVS Generic Installation Guide for Certain Cat<SUP>&reg;</SUP> Products{7347, 7348}
WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348}
Technical Information Bulletin
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Special Instruction
Installation of CAESultra for Track-Type Tractors{7010, 733T, 7490, 7604}
Installation of CAESultra for Track-Type Tractors{7010, 733T, 7490, 7604}
Service Magazine
A New Antenna For The Product Link Is Available {7010, 733T}
2008/06/09
Special Instruction
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat<SUP>&reg;</SUP> Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Truck sale:

Caterpillar D4D, Construction
14,000 
Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT
CATERPILLAR D4D 1966
 
CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4D 1973
 
CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CAT D4D
USD $39,016 
CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia
CAT D4D
USD $18,900 
CAT D4D

DRC Ranch
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.