D4D TRACTOR / POWERSHIFT / 83J02177-03421 (MACHINE) UNDERCARRIAGE Caterpillar SIS

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 83J
D4D TRACTOR / POWERSHIFT / 83J02177-03421 (MACHINE) UEG0682S D4D 83J (1968)

Parts group D4D:

For full view, you need register

UNDERCARRIAGE

ADJUSTMENT GP-HYDRAULIC TRACK

5K-8114 HYDRAULIC TRACK ADJUSTING GROUP

5K8114 HYDRAULIC TRACK ADJUSTING GROUP--Type 1
Part of 8K5240 Track Roller Frame Arrangement shown on Pages 94 and 94B
AN ATTACHMENT

5K-8114 HYDRAULIC TRACK ADJUSTING GROUP

5K8114 HYDRAULIC TRACK ADJUSTING GROUP--Type 2
Part of 8K5240 Track Roller Frame Arrangement shown on Page 94 & 94B
AN ATTACHMENT

1M-7743 ADJUSTMENT GP-HYDRAULIC TRACK

1M7743 HYDRAULIC TRACK ADJUSTING GROUP
AN ATTACHMENT

5K-8114 HYDRAULIC TRACK ADJUSTING GROUP

5K8114 HYDRAULIC TRACK ADJUSTING GROUP--Type 3
Part of 8K5240 Track Roller Frame Arrangement shown on Pages 94 & 94B
AN ATTACHMENT

IDLER GP

2V-3878 IDLER GP-FRONT

2V3878 FRONT IDLER GROUP--Part 1 of 2
Serial No. 83J3341-Up

2V-3878 IDLER GP-FRONT

2V3878 FRONT IDLER GROUP--Part 2 of 2
Serial No. 83J3341-Up

9H-5827 FRONT IDLER GROUP

9H5827 FRONT IDLER GROUP
Serial No. 83J2177 to 83J3340 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides

3K-6634 FRONT IDLER GROUP

3K6634 FRONT IDLER GROUP--24.25" Outside Diameter
Note: Quantities shown are those required for both R.H. & L.H. sides
AN ATTACHMENT

5K-4544 FRONT IDLER GROUP

5K4544 FRONT IDLER GROUP--21.88" Outside Diameter
FOR USE WITH 35 SECTION TRACK GROUP
Note: Quantities shown are those required for both R.H. & L.H. Sides
AN ATTACHMENT

3K-6634 FRONT IDLER GROUP

3K6634 FRONT IDLER GROUP--Large O.D.--24.25 in.
Part of 8K5240 Track Roller Frame Arrangement shown on Page 94B
AN ATTACHMENT

ROLLER GP

1M-6286 TRACK ROLLER DIRT GUARD GROUP

1M6286 TRACK ROLLER DIRT GUARD GROUP
AN ATTACHMENT

7K-8095 ROLLER GP-TRACK SINGLE FLANGE

7K8095 TRACK ROLLER GROUP--Single Flange--4 Required

7K-8096 ROLLER GP-TRACK DOUBLE FLANGE

7K8096 TRACK ROLLER GROUP--Double Flange--6 Required

6K-9879 ROLLER GP-TRACK CARRIER

6K9879 TRACK CARRIER ROLLER GROUP--2 Required

SPRING GP

4K-5207 SPRING GP-EQUALIZER

4K5207 EQUALIZER SPRING GROUP

TRACK ADJUSTER & RECOIL GP

2V-6187 MECHANICAL TRACK ADJUSTING GROUP

2V6187 MECHANICAL TRACK ADJUSTING GROUP
FOR USE WITH 8K5240 TRACK ROLLER FRAME ARRANGEMENT

TRACK GP

7K-2105 TRACK GROUP

7K2105 TRACK GROUP--13" Grouser Shoe--2 Required
Part of 8K5240 Track Roller Frame Arrangement shown on Page 94
AN ATTACHMENT

2V-2274 TRACK GROUP

2V2274 TRACK GROUP--13" Grouser Shoe--2 Required
Part of 8K5240 Track Roller Frame Arrangement shown on Page 94A

1V-8134 RUBBER SHOE PLATE SERVICE GROUP

1V8134 RUBBER SHOE PLATE SERVICE GROUP
Only separate parts serviced

1V-6816 TRACK GROUP

1V6816 TRACK GROUP--13" Grouser Shoe--2 Required
FOR USE WITH NON-OSCILLATING TRACK ROLLER FRAMES
AN ATTACHMENT

TRACK GROUPS

TRACK GROUPS--2 Required
Serial No. 83J2177 to 83J2966 inclusive

TRACK GROUPS

TRACK GROUPS--2 Required
Serial No. 83J2967-Up

TRACK GROUPS

TRACK GROUPS--2 Required
Serial No. 83J2177 to 83J2966 inclusive
FOR USE WITH 8K5240 ARRANGEMENT SHOWN ON PAGE 94

TRACK GROUPS

TRACK GROUPS--2 Required
Serial No. 83J2967-Up
FOR USE WITH 8K5240 ARRANGEMENT SHOWN ON PAGE 94

TRACK GROUPS

TRACK GROUPS--2 Required
Serial No. 83J2177 to 83J2966 inclusive
FOR USE WITH LARGE OUTSIDE DIAMETER FRONT IDLER

TRACK GROUPS

TRACK GROUPS--2 Required
Serial No. 83J2967-Up
FOR USE WITH LARGE OUTSIDE DIAMETER FRONT IDLER

TRACK GROUP

TRACK GROUP--Sealed Non-Lubricated
FOR USE WITH LARGE O.D. IDLERS

TRACK GROUP

TRACK GROUP--Sealed & Lubricated
FOR USE WITH LARGE O.D. IDLER

TRACK GROUP

TRACK GROUP--Sealed Non-Lubricated
FOR USE WITH SMALL O.D. IDLER

TRACK GROUP

TRACK GROUP--Sealed & Lubricated
FOR USE WITH SMALL O.D. IDLER

TRACK GROUP

TRACK GROUP--Sealed Non-Lubricated
FOR USE WITH NON-OSCILLATING TRACK ROLLER FRAME

TRACK GROUP

TRACK GROUP--Sealed & Lubricated
FOR USE WITH NON-OSCILLATING TRACK ROLLER FRAME

FRAME GP-TRACK ROLLER

4K-5210 FRAME GP-TRACK ROLLER

4K5210 TRACK ROLLER FRAME GROUP
Note: Quantities shown are those required for both R.H. and L.H. sides

7K-3303 FRAME GP-TRACK ROLLER

7K3303 TRACK ROLLER FRAME GROUP--With Guiding Guards--Factory Installation--Type 1
Note: Quantities shown are those required for both R.H. & L.H. sides
AN ATTACHMENT

7K-3303 FRAME GP-TRACK ROLLER

7K3303 TRACK ROLLER FRAME GROUP--With Guiding Guards--Factory Installation--Type 3
Note: Quantities shown are those required for both R.H. and L.H. sides
AN ATTACHMENT

7K-3303 FRAME GP-TRACK ROLLER

7K3303 TRACK ROLLER FRAME GROUP--With Guiding Guards--Factory Installation--Type 2
Note: Quantities shown are those required for both R.H. and L.H. sides
AN ATTACHMENT

8K-5240 TRACK ROLLER FRAME ARRANGEMENT

8K5240 TRACK ROLLER FRAME ARRANGEMENT--Non-Oscillating
5K8114 Track Adjusting and 7K2105 Track parts are shown on Pages 99 and 100
AN ATTACHMENT

8K-5240 TRACK ROLLER FRAME ARRANGEMENT

8K5240 TRACK ROLLER FRAME ARRANGEMENT--Non Oscillating--Type 2
8K5239 Frame, 5K8114 Track Adjusting and 2V2274 Track parts are shown on Pages 95, 99 and 100A
AN ATTACHMENT

8K-5240 TRACK ROLLER FRAME ARRANGEMENT

8K5240 TRACK ROLLER FRAME ARRANGEMENT--Non Oscillating--Type 3
3K6634 Front Idler, 8K5239 Frame, 5K8114 Track Adjusting and 2V2274 Track Groups are shown on
Pages 94D, 95, 98A, 98B, 99 and 100A. AN ATTACHMENT

8K-5240 TRACK ROLLER FRAME ARRANGEMENT

8K5240 TRACK ROLLER FRAME ARRANGEMENT--Non-Oscillating--Type 4
8K5239 Frame and 2V2274 Track parts are shown on Pages 95 and 100A
AN ATTACHMENT

8K-5239 TRACK ROLLER FRAME GROUP

8K5239 TRACK ROLLER FRAME GROUP--With Guiding Guards
Part of 8K5240 Track Roller Frame Arrangement
Note: Quantities shown are those required for both R.H. & L.H. sides
AN ATTACHMENT

Information:

(For parts list, see above)

UNDERCARRIAGE

ADJUSTMENT GP-HYDRAULIC TRACK

Service Magazine

Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28

BAR GP-EQUALIZER

Specifications

Equalizer Spring
D4D TRACTOR POWER TRAIN

Reuse And Salvage Guidelines

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Disassembly and Assembly

Equalizer Spring
D4D TRACTOR POWER TRAIN

Service Magazine

Stronger Saddle Assembly Used In Equalizer Spring Group{7204}
1978/01/09

IDLER GP

Special Instruction

Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}

Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Specifications

Front Idler And Recoil Spring
D4D TRACTOR POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

Undercarriage Reconditioning Bulletin

Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}

Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}

Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}

Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}

Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}

Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reuse And Salvage Guidelines

Disassembly and Assembly

Front Idlers
D4D TRACTOR POWER TRAIN

Front Idler Rod Assemblies
D4D TRACTOR POWER TRAIN

Hydraulic Track Adjusters
D4D TRACTOR POWER TRAIN

Recoil Springs
D4D TRACTOR POWER TRAIN

Service Magazine

Use Cork Plugs To Keep Bearing Blocks Clean In Rebuilt Idlers{4159}
1985/06/10

Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16

Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

Best Practices To Reduce Track Idler Flat Spotting {4159, 4170}
2014/11/18

Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}

LINK GP-TRACK

Undercarriage Reconditioning Bulletin

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reuse And Salvage Guidelines

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Service Magazine

Track Seal Temperature Guidelines {4169, 4170, 4171}
2012/11/30

Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}

ROLLER GP

Specifications

Track Rollers
D4D TRACTOR POWER TRAIN

Track Carrier Roller
D4D TRACTOR POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}

Undercarriage Reconditioning Bulletin

Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}

Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}

Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}

Carrier Roller Oil Fill Volume {4154}
Carrier Roller Oil Fill Volume {4154}

Reconditioning Dimensions for Track Rollers {4154, 4180}
Reconditioning Dimensions for Track Rollers {4154, 4180}

Carrier Roller Disassembly and Assembly Procedures {4154}
Carrier Roller Disassembly and Assembly Procedures {4154}

Oval Track Roller Disassembly and Assembly Procedures {4180}
Oval Track Roller Disassembly and Assembly Procedures {4180}

Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Disassembly and Assembly

Track Carrier Rollers
D4D TRACTOR POWER TRAIN

Track Rollers
D4D TRACTOR POWER TRAIN

Service Magazine

Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16

Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}

SEAL & BUSHING GP

Undercarriage Reconditioning Bulletin

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

SPRING GP

Special Instruction

Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}

Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}

Specifications

Equalizer Spring
D4D TRACTOR POWER TRAIN

Front Idler And Recoil Spring
D4D TRACTOR POWER TRAIN

Disassembly and Assembly

Equalizer Spring
D4D TRACTOR POWER TRAIN

Recoil Springs
D4D TRACTOR POWER TRAIN

Service Magazine

Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28

Stronger Saddle Assembly Used In Equalizer Spring Group{7204}
1978/01/09

TRACK ADJUSTER & RECOIL GP

Special Instruction

Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}
Installation Of 2V7197 And 2V7198 Recoil Spring Pilot Assemblies{4158}

Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}
Installation Of 2V9025 And 2V9027 Recoil Spring Rear Pilots{4158}

Specifications

Front Idler And Recoil Spring
D4D TRACTOR POWER TRAIN

Reuse And Salvage Guidelines

Disassembly and Assembly

Hydraulic Track Adjusters
D4D TRACTOR POWER TRAIN

Recoil Springs
D4D TRACTOR POWER TRAIN

Service Magazine

Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28

TRACK GP

Special Instruction

Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}

Technical Information Bulletin

Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}

Specifications

Track Roller Frame
D4D TRACTOR POWER TRAIN

Alignment Of Track Roller Frame
D4D TRACTOR POWER TRAIN

Adjustment Of The Track
D4D TRACTOR POWER TRAIN

Track Rollers
D4D TRACTOR POWER TRAIN

Track Carrier Roller
D4D TRACTOR POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Undercarriage Reconditioning Bulletin

Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}

Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}

Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}

Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reuse And Salvage Guidelines

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Disassembly and Assembly

Track Carrier Rollers
D4D TRACTOR POWER TRAIN

Track Rollers
D4D TRACTOR POWER TRAIN

Tracks
D4D TRACTOR POWER TRAIN

Hydraulic Track Adjusters
D4D TRACTOR POWER TRAIN

Track Roller Frames
D4D TRACTOR POWER TRAIN

Aligment Of Track Roller Frames
D4D TRACTOR POWER TRAIN

Service Magazine

6V4175 Socket Available For Worn Track Bolts{0612,4179}
1981/12/07

Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06

Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27

Two New Track Presses Are Now Available {0700, 0729}
2004/12/27

Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27

Track Seal Temperature Guidelines {4169, 4170, 4171}
2012/11/30

Best Practices To Reduce Track Idler Flat Spotting {4159, 4170}
2014/11/18

Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}

UNDERCARRIAGE GP

Tool Operating Manual

150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Undercarriage Reconditioning Bulletin

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}

Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}

Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}

Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reuse And Salvage Guidelines

Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}

Service Magazine

Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06

WHEEL & IDLER GP

Reuse And Salvage Guidelines

DRIVE GP

Special Instruction

Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

MISCELLANEOUS INFORMATION

Undercarriage Reconditioning Bulletin

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

TOOLS

Truck Engine News

New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27

Tool Operating Manual

142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}

TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Undercarriage Reconditioning Bulletin

Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}

Welding Wire and Flux {0679, 4150, 7950}
Welding Wire and Flux {0679, 4150, 7950}

Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}

Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}

Service Magazine

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05

Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27

Two New Track Presses Are Now Available {0700, 0729}
2004/12/27

FRAME GP-TRACK ROLLER

Specifications

Track Roller Frame
D4D TRACTOR POWER TRAIN

Alignment Of Track Roller Frame
D4D TRACTOR POWER TRAIN

Tool Operating Manual

Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}

Undercarriage Reconditioning Bulletin

Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}

Reuse And Salvage Guidelines

Disassembly and Assembly

Track Roller Frames
D4D TRACTOR POWER TRAIN

Aligment Of Track Roller Frames
D4D TRACTOR POWER TRAIN

Service Magazine

Oscillation Limit Group Available{7204,7205,7206}
1983/05/30

Stronger Dowel Used In Bearing Cap On The Diagonal Brace Assembly{4151,4191}
1977/11/14

Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28

FRAME GP

Tool Operating Manual

Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}

Reuse And Salvage Guidelines

SPROCKET GP

Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}

GUARD GP

Special Instruction

Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}

CYLINDER GP

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Reuse And Salvage Guidelines

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Magazine

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

14,000

Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT

CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $39,016

CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia

USD $18,900

CAT D4D

DRC Ranch